summaryrefslogtreecommitdiff
path: root/include/linux/usb
AgeCommit message (Collapse)Author
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-24usb: chipidea: drop "13xxx" infixAlexander Shishkin
"ci13xxx" is bad for at least the following reasons: * people often mistype it * it doesn't add any informational value to the names it's used in * it needlessly attracts mail filters This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending on the situation. Modules with ci13xxx prefix are also renamed accordingly and aliases are added for compatibility. Otherwise, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24usb: fix build error without CONFIG_USB_PHYPeter Chen
on i386: drivers/built-in.o: In function `ci_hdrc_probe': core.c:(.text+0x20446b): undefined reference to `of_usb_get_phy_mode' Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: EHCI: tegra: fix circular module dependenciesStephen Warren
The Tegra EHCI driver directly calls various functions in the Tegra USB PHY driver. The reverse is also true; the PHY driver calls into the EHCI driver. This is problematic when the two are built as modules. The calls from the PHY to EHCI driver were originally added in commit bbdabdb "usb: add APIs to access host registers from Tegra PHY", for the following reasons: 1) The register being touched is an EHCI register, so logically only the EHCI driver should touch it. 2) (1) implies that some locking may be needed to correctly implement the r/m/w access to this shared register. 3) We were expecting to pass only the PHY register space to the Tegra PHY driver, and hence it would not have access to touch the shared registers. To solve this, that commit added functions in the EHCI driver to touch the shared register on behalf of the PHY driver. In practice, we ended up not having any locking in the implementaiton of those functions, and I've been led to believe this is safe. Equally, (3) did not happen either. Hence, it is possible for the PHY driver to touch the shared register directly. Given that, this patch moves the code to touch the shared register back into the PHY driver, to eliminate the module problems. If we actually need locking or co-ordination in the future, I propose we put the lock support into some pre-existing core module, or into a third separate module, in order to avoid the circular dependencies. I apologize for my contribution to code churn here. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17usb: chipidea: introduce dual role mode pdata flagsSascha Hauer
Even if a chipidea core is otg capable the board may not be. This allows to explicitly set the core to host/peripheral mode. Without these flags the driver falls back to the old behaviour. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17usb: chipidea: add PTW, PTS and STS handlingMichael Grzeschik
This patch makes it possible to configure the PTW, PTS and STS bits inside the portsc register for host and device mode before the driver starts and the phy can be addressed as hardware implementation is designed. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17usb: add devicetree helpers for determining dr_mode and phy_typeMichael Grzeschik
This adds two little devicetree helper functions for determining the dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from the devicetree. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: increase the number of devices we supportGreg Kroah-Hartman
We had the limit of 255 USB to serial devices on one system for almost 15 years, with no complaints. But now it's time to move on from these tiny "baby" systems, and bump the number up to 512, which should last us a few more years: "512 is a nice number" -- Tobias Winter Note, this is still a static value, and uses up tty core memory with this many tty devices allocated. Converting the driver to use TTY_DRIVER_DYNAMIC_DEV is the next thing to do in order to remove this limitation. Reported-by: Tobias Winter <tobias@linuxdingsda.de> Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: make minor allocation dynamicGreg Kroah-Hartman
This moves the allocation of minor device numbers from a static array to be dynamic, using the idr interface. This means that you could potentially get "gaps" in a minor number range for a single USB serial device with multiple ports, but all should still work properly. We remove the 'minor' field from the usb_serial structure, as it no longer makes any sense for it (use the field in the usb_serial_port structure if you really want to know this number), and take the fact that we were overloading a number in this field to determine if we had initialized the minor numbers or not, and just use a flag variable instead. Note, we still have the limitation of 255 USB to serial devices in the system, as that is all we are registering with the TTY layer at this point in time. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14Merge tag 'renesas-phy-rcar-usb-for-v3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc From Simon Horman: Renesas USB updates for v3.11 These updates are by Sergei Shtylyov to clean-up USB support present for R8A7779/Marzen and then extend USB support coverage to R8A7778/BOCK-W. * tag 'renesas-phy-rcar-usb-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: BOCK-W: add USB support ARM: shmobile: r8a7778: add USB support phy-rcar-usb: add R8A7778 support phy-rcar-usb: handle platform data ARM: shmobile: Marzen: pass platform data to USB PHY device phy-rcar-usb: add platform data phy-rcar-usb: correct base address ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource phy-rcar-usb: remove EHCI internal buffer setup ARM: shmobile: r8a7779: setup EHCI internal buffer ehci-platform: add pre_setup() method to platform data ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code Conflicts: arch/arm/mach-shmobile/board-marzen.c arch/arm/mach-shmobile/setup-r8a7778.c Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-12Merge tag 'usb-for-v3.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.11 merge window All function drivers are now converted to our new configfs-based binding. Eventually this will help us getting rid of in-kernel gadget drivers and only keep function drivers in the kernel. MUSB was taught that it needs to be built for host-only and device-only modes too. We had this support long ago but it involved a ridiculous amount of ifdefs. Now we have a much cleaner approach. Samsung Exynos4 platform now implements HSIC support. We're introducing support for AB8540 and AB9540 PHYs. MUSB module reinsertion now works as expected, before we were getting -EBUSY being returned by the resource checks done on driver core. DWC3 now has minimum support for TI's AM437x series of SoCs. OMAP5 USB3 PHY learned one extra DPLL configuration values because that PHY is reused in TI's DRA7xx devices. We're introducing support for Faraday fotg210 UDCs. Last, but not least, the usual set of non-critical fixes and cleanups ranging from usage of platform_{get,set}_drvdata to lock improvements. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-06-11ehci-platform: add pre_setup() method to platform dataSergei Shtylyov
Sometimes there is a need to initialize some non-standard registers mapped to the EHCI region before accessing the standard EHCI registers. Add pre_setup() method with 'struct usb_hcd *' parameter to be called just before ehci_setup() to the 'ehci-platform' driver's platform data for this purpose... While at it, add the missing incomplete declaration of 'struct platform_device' to <linux/usb/ehci_pdriver.h>... The patch has been tested on the Marzen and BOCK-W boards. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-10USB: serial: ports: add minor and port numberGreg Kroah-Hartman
The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
2013-06-06USB: wusbcore: add HWA-specific fields to usb_rpipe_descriptorThomas Pugliese
This patch adds the HWA specific members to struct usb_rpipe_descriptor and sets them correctly based on the wireless endpoint compananion descriptor. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03Allow the USB HCD to create Wireless USB root hubsThomas Pugliese
This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30usb: phy: registering Tegra USB PHY as platform driverVenu Byravarasu
Registered Tegra USB PHY as a separate platform driver. To synchronize host controller and PHY initialization, used deferred probe mechanism. As PHY should be initialized before EHCI starts running, deferred probe of Tegra EHCI driver till PHY probe gets completed. Got rid of instance number based handling in host driver. Made use of DT params to get the PHY Pad registers. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: get ULPI reset GPIO info using DT.Venu Byravarasu
As GPIO information is avail through DT, used it to get Tegra ULPI reset GPIO number. Added a new member to tegra_usb_phy structure to store this number. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-30usb: phy: tegra: Get PHY mode using DTVenu Byravarasu
Added a new PHY mode to support OTG. Obtained Tegra USB PHY mode using DT property. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-16USB: serial: add generic wait_until_sent implementationJohan Hovold
Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: add wait_until_sent operationJohan Hovold
Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15Correct typo "supperspeed" to "superspeed".Robert P. J. Day
Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-08usbnet: allow status interrupt URB to always be activeDan Williams
Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not. A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03Merge tag 'sound-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
2013-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-04-23usb: phy: tegra: don't call into tegra-ehci directlyArnd Bergmann
Both phy-tegra-usb.c and ehci-tegra.c export symbols used by the other one, which does not work if one of them or both are loadable modules, resulting in an error like: drivers/built-in.o: In function `utmi_phy_clk_disable': drivers/usb/phy/phy-tegra-usb.c:302: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_clk_enable': drivers/usb/phy/phy-tegra-usb.c:324: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_power_on': drivers/usb/phy/phy-tegra-usb.c:447: undefined reference to `tegra_ehci_set_pts' This turns the interface into a one-way dependency by letting the tegra ehci driver pass two function pointers for callbacks that need to be called by the phy driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15Merge tag 'asoc-v3.10' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.10 A bunch of changes here, the most interesting one subsystem wise being Morimoto-san's work to create snd_soc_component which doesn't do much for now but will be pretty important going forwards: - Add a new component object type which will form the basis of moving to a more generic handling of SoC and off-SoC components, contributed by Kuninori Morimoto. - A fairly large set of cleanups for the dmaengine integration from Lars-Peter Clausen, starting to move towards being able to have a generic driver based on the library. - Performance optimisations to DAPM from Ryo Tsutsui. - Support for mixer control sharing in DAPM from Stephen Warren. - Multiplatform ARM cleanups from Arnd Bergmann. - New CODEC drivers for AK5385 and TAS5086 from Daniel Mack.
2013-04-11usbnet: handle link changeMing Lei
The link change is detected via the interrupt pipe, and bulk pipes are responsible for transfering packets, so it is reasonable to stop bulk transfer after link is reported as off. Two adavantages may be obtained with stopping bulk transfer after link becomes off: - USB bus bandwidth is saved(USB bus is shared bus except for USB3.0), for example, lots of 'IN' token packets and 'NYET' handshake packets is transfered on 2.0 bus. - probabaly power might be saved for usb host controller since cancelling bulk transfer may disable the asynchronous schedule of host controller. With this patch, when link becomes off, about ~10% performance boost can be found on bulk transfer of anther usb device which is attached to same bus with the usbnet device, see below test on next-20130410: - read from usb mass storage(Sandisk Extreme USB 3.0) on pandaboard with below command after unplugging ethernet cable: dd if=/dev/sda iflag=direct of=/dev/null bs=1M count=800 - without the patch 1, 838860800 bytes (839 MB) copied, 36.2216 s, 23.2 MB/s 2, 838860800 bytes (839 MB) copied, 35.8368 s, 23.4 MB/s 3, 838860800 bytes (839 MB) copied, 35.823 s, 23.4 MB/s 4, 838860800 bytes (839 MB) copied, 35.937 s, 23.3 MB/s 5, 838860800 bytes (839 MB) copied, 35.7365 s, 23.5 MB/s average: 23.6MB/s - with the patch 1, 838860800 bytes (839 MB) copied, 32.3817 s, 25.9 MB/s 2, 838860800 bytes (839 MB) copied, 31.7389 s, 26.4 MB/s 3, 838860800 bytes (839 MB) copied, 32.438 s, 25.9 MB/s 4, 838860800 bytes (839 MB) copied, 32.5492 s, 25.8 MB/s 5, 838860800 bytes (839 MB) copied, 31.6178 s, 26.5 MB/s average: 26.1MB/s Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11usbnet: introduce usbnet_link_change APIMing Lei
This patch introduces the API of usbnet_link_change, so that usbnet can handle link change centrally, which may help to implement killing traffic URBs for saving USB bus bandwidth and host controller power. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-05Merge tag 'usb-for-v3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-04-03Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge for cleaning up usb-audio code the recent commit modified, and further UAC2 autoclock patches.
2013-04-03usb: gadget: the start of the configfs interfaceSebastian Andrzej Siewior
|# modprobe dummy_hcd num=2 |# modprobe libcomposite |# lsmod |Module Size Used by |libcomposite 31648 0 |dummy_hcd 19871 0 |# mkdir /sys/kernel/config/usb_gadget/oha |# cd /sys/kernel/config/usb_gadget/oha |# mkdir configs/def.1 |# mkdir configs/def.2 |# mkdir functions/acm.ttyS1 |# mkdir strings/0x1 |mkdir: cannot create directory `strings/0x1': Invalid argument |# mkdir strings/0x409 |# mkdir strings/1033 |mkdir: cannot create directory `strings/1033': File exists |# mkdir strings/1032 |# mkdir configs/def.1/strings/0x409 |# mkdir configs/def.2/strings/0x409 |#find . -ls | 975 0 drwxr-xr-x 5 root root 0 Dec 23 17:40 . | 978 0 drwxr-xr-x 4 root root 0 Dec 23 17:43 ./strings | 4100 0 drwxr-xr-x 2 root root 0 Dec 23 17:43 ./strings/1032 | 995 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/serialnumber | 996 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/product | 997 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/1032/manufacturer | 2002 0 drwxr-xr-x 2 root root 0 Dec 23 17:41 ./strings/0x409 | 998 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/serialnumber | 999 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/product | 1000 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./strings/0x409/manufacturer | 977 0 drwxr-xr-x 4 root root 0 Dec 23 17:41 ./configs | 4081 0 drwxr-xr-x 3 root root 0 Dec 23 17:41 ./configs/def.2 | 4082 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.2/strings | 2016 0 drwxr-xr-x 2 root root 0 Dec 23 17:42 ./configs/def.2/strings/0x409 | 1001 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/strings/0x409/configuration | 1002 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/bmAttributes | 1003 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.2/MaxPower | 979 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.1 | 980 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 ./configs/def.1/strings | 5122 0 drwxr-xr-x 2 root root 0 Dec 23 17:42 ./configs/def.1/strings/0x409 | 1004 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/strings/0x409/configuration | 1005 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/bmAttributes | 1006 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./configs/def.1/MaxPower | 976 0 drwxr-xr-x 3 root root 0 Dec 23 17:41 ./functions | 981 0 drwxr-xr-x 2 root root 0 Dec 23 17:41 ./functions/acm.ttyS1 | 1007 0 -r--r--r-- 1 root root 4096 Dec 23 17:43 ./functions/acm.ttyS1/port_num | 1008 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./UDC | 1009 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bcdUSB | 1010 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bcdDevice | 1011 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./idProduct | 1012 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./idVendor | 1013 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bMaxPacketSize0 | 1014 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceProtocol | 1015 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceSubClass | 1016 0 -rw-r--r-- 1 root root 4096 Dec 23 17:43 ./bDeviceClass |# cat functions/acm.ttyS1/port_num |0 |# ls -lah /dev/ttyGS* |crw-rw---T 1 root dialout 252, 0 Dec 23 17:41 /dev/ttyGS0 | |# echo 0x1234 > idProduct |# echo 0xabcd > idVendor |# echo 1122 > strings/0x409/serialnumber |# echo "The manufacturer" > strings/0x409/manufacturer |# echo 1 > strings/1032/manufacturer |# echo 1sa > strings/1032/product |# echo tada > strings/1032/serialnumber |echo "Primary configuration" > configs/def.1/strings/0x409/configuration |# echo "Secondary configuration" > configs/def.2/strings/0x409/configuration |# ln -s functions/acm.ttyS1 configs/def.1/ |# ln -s functions/acm.ttyS1 configs/def.2/ |find configs/def.1/ -ls | 979 0 drwxr-xr-x 3 root root 0 Dec 23 17:49 configs/def.1/ | 6264 0 lrwxrwxrwx 1 root root 0 Dec 23 17:48 configs/def.1/acm.ttyS1 -> ../../../../usb_gadget/oha/functions/acm.ttyS1 | 980 0 drwxr-xr-x 3 root root 0 Dec 23 17:42 configs/def.1/strings | 5122 0 drwxr-xr-x 2 root root 0 Dec 23 17:49 configs/def.1/strings/0x409 | 6284 0 -rw-r--r-- 1 root root 4096 Dec 23 17:47 configs/def.1/strings/0x409/configuration | 6285 0 -rw-r--r-- 1 root root 4096 Dec 23 17:49 configs/def.1/bmAttributes | 6286 0 -rw-r--r-- 1 root root 4096 Dec 23 17:49 configs/def.1/MaxPower | |echo 120 > configs/def.1/MaxPower | |# ls -lh /sys/class/udc/ |total 0 |lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.0 -> ../../devices/platform/dummy_udc.0/udc/dummy_udc.0 |lrwxrwxrwx 1 root root 0 Dec 23 17:50 dummy_udc.1 -> ../../devices/platform/dummy_udc.1/udc/dummy_udc.1 |# echo dummy_udc.0 > UDC |# lsusb |Bus 001 Device 002: ID abcd:1234 Unknown | |lsusb -d abcd:1234 -v |Device Descriptor: … | idVendor 0xabcd Unknown | idProduct 0x1234 | bcdDevice 3.06 | iManufacturer 1 The manufacturer | iProduct 2 | iSerial 3 1122 | bNumConfigurations 2 … |echo "" > UDC v5…v6 - wired up strings with usb_gstrings_attach() - add UDC attribe. Write "udc-name" will bind the gadget. Write an empty string (it should contain \n since 0 bytes write get optimzed away) will unbind the UDC from the gadget. The name of available UDCs can be obtained from /sys/class/udc/ v4…v5 - string rework. This will add a strings folder incl. language code like strings/409/manufacturer as suggested by Alan. - rebased ontop reworked functions.c which has usb_function_instance which is used prior after "mkdir acm.instance" and can be directly used for configuration via configfs. v3…v4 - moved functions from the root folde down to the gadget as suggested by Michał - configs have now their own configs folder as suggested by Michał. The folder is still name.bConfigurationValue where name becomes the sConfiguration. Is this usefull should we just stilc configs/bConfigurationValue/ ? - added configfs support to the ACM function. The port_num attribute is exported by f_acm. An argument has been added to the USB alloc function to distinguish between "old" (use facm_configure() to configure and configfs interface (expose a config_node). The port_num is currently a dumb counter. It will require some function re-work to make it work. scheduled for v5: - sym linking function into config. v2…v3 - replaced one ifndef by ifdef as suggested by Micahał - strstr()/strchr() function_make as suggested by Micahł - replace [iSerialNumber|iProduct|iManufacturer] with [sSerialNumber|sProduct|sManufacturer] as suggested by Alan - added creation of config descriptors v1…v2 - moved gadgets from configfs' root directory into /udcs/ within our "usb_gadget" folder. Requested by Andrzej & Michał - use a dot as a delimiter between function's name and its instance's name as suggested by Michał - renamed all config_item_type, configfs_group_operations, make_group, drop_item as suggested by suggested by Andrzej to remain consisten within this file and within other configfs users - Since configfs.c and functions.c are now part of the udc-core module, the module itself is now called udc. Also added a tiny ifdef around init code becuase udc-core is subsys init and this is too early for configfs in the built-in case. In the module case, we can only have one init function. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-02usb: renesas_usbhs: fixup sparse errors for common.cKuninori Morimoto
This patch fixup below sparse errors CHECK ${RENESAS_USB}/common.c ${RENESAS_USB}/common.c:313:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:322:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:384:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:524:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:545:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:574:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:606:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/mod_gadget.c:233:28: warning: symbol 'req_clear_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:274:28: warning: symbol 'req_set_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:375:28: warning: symbol 'req_get_status' was not declared. Should it be static? [ balbi@ti.com : added three sparse fixes to mod_gadget.c ] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-28USB: remove CONFIG_USB_SUSPEND optionAlan Stern
This patch (as1675) removes the CONFIG_USB_SUSPEND option, essentially replacing it everywhere with CONFIG_PM_RUNTIME (except for one place in hub.c, where it is replaced with CONFIG_PM because the code needs to be used in both runtime and system PM). The net result is code shrinkage and simplification. There's very little point in keeping CONFIG_USB_SUSPEND because almost everybody enables it. The few that don't will find that the usbcore module has gotten somewhat bigger and they will have to take active measures if they want to prevent hubs from being runtime suspended. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman
This lets us fix the build error that happens when these two trees are merged together. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: remove unused MSR-wait queueJohan Hovold
Remove the port MSR-wait queue now that all drivers have been migrated to the tty-port queue. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: add generic get_icount implementationJohan Hovold
Add generic get_icount implementation that subdrivers relying on the port interrupt counters can use. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: add generic TIOCMIWAIT implementationJohan Hovold
Add generic TIOCMIWAIT implementation which correctly handles hangup, USB-device disconnect, does not rely on the deprecated sleep_on functions and hence does not suffer from the races currently affecting several usb-serial drivers. This makes it much easier to add TIOCMIWAIT support to subdrivers as the tricky details related to hangup and disconnect (e.g. atomicity, that the private port data may have been freed when woken up, and waking up processes at disconnect) have been handled once and for all. To add support to a subdriver, simply set the tiocmiwait-port-operation field, update the port icount fields and wake up any process sleeping on the tty-port modem-status-change wait queue on changes. Note that the tty-port initialised flag can be used to detect disconnected as the port will be hung up as part of disconnect (and cannot be reactivated due to the disconnected flag). However, as the tty-port implementation currently wakes up processes before calling port shutdown, the tty-hupping flag must also be checked to detect hangup for now. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: add tiocmiwait subdriver operationJohan Hovold
Add tiocmiwait operation to struct usb_serial_driver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: remove generic release callbackJohan Hovold
Remove empty generic release implementation and make the release callback non-mandatory (like attach, probe and disconnect). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: remove generic disconnect callbackJohan Hovold
Remove the now empty generic disconnect callback and make the disconnect callback non-mandatory. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMANDBjørn Mork
Userspace applications need to know the maximum supported message size. The cdc-wdm driver translates between a character device stream and a message based protocol. Each message is transported as a usb control message with no further encapsulation or syncronization. Each read or write on the character device should translate to exactly one usb control message to ensure that message boundaries are kept intact. That means that the userspace application must know the maximum message size supported by the device and driver, making this size a vital part of the cdc-wdm character device API. CDC WDM and CDC MBIM functions export the maximum supported message size through CDC functional descriptors. The cdc-wdm and cdc_mbim drivers will parse these descriptors and use the value chosen by the device. The only current way for a userspace application to retrive the value is by duplicating the descriptor parsing. This is an unnecessary complex task, and application writers are likely to postpone it, using a fixed value and adding a "todo" item. QMI functions have no way to tell the host what message size they support. The qmi_wwan driver use a fixed value based on protocol recommendations and observed device behaviour. Userspace applications must know and hard code the same value. This scheme will break if we ever encounter a QMI device needing a device specific message size quirk. We are currently unable to support such a device because using a non default size would break the implicit userspace API. The message size is currently a hidden attribute of the cdc-wdm userspace API. Retrieving it is unnecessarily complex, increasing the possibility of drivers and applications using different limits. The resulting errors are hard to debug, and can only be replicated on identical hardware. Exporting the maximum message size from the driver simplifies the task for the userspace application, and creates a unified information source independent of device and function class. It also serves to document that the message size is part of the cdc-wdm userspace API. This proposed API extension has been presented for the authors of userspace applications and libraries using the current API: libmbim, libqmi, uqmi, oFono and ModemManager. The replies were: Aleksander Morgado: "We do really need max message size for MBIM; and as you say, it may be good to have the max message size info also for QMI, so the new ioctl seems a good addition. So +1 from my side, for what it's worth." Dan Williams: "Yeah, +1 here. I'd prefer the sysfs file, but the fact that that doesn't work for fd passing pretty much kills it." No negative replies are so far received. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25usb: add find_raw_port_number callback to struct hc_driver()Lan Tianyu
xhci driver divides the root hub into two logical hubs which work respectively for usb 2.0 and usb 3.0 devices. They are independent devices in the usb core. But in the ACPI table, it's one device node and all usb2.0 and usb3.0 ports are under it. Binding usb port with its acpi node needs the raw port number which is reflected in the xhci extended capabilities table. This patch is to add find_raw_port_number callback to struct hc_driver(), fill it with xhci_find_raw_port_number() which will return raw port number and add a wrap usb_hcd_find_raw_port_number(). Otherwise, refactor xhci_find_real_port_number(). Using xhci_find_raw_port_number() to get real index in the HW port status registers instead of scanning through the xHCI roothub port array. This can help to speed up. All addresses in xhci->usb2_ports and xhci->usb3_ports array are kown good ports and don't include following bad ports in the extended capabilities talbe. (1) root port that doesn't have an entry (2) root port with unknown speed (3) root port that is listed twice and with different speeds. So xhci_find_raw_port_number() will only return port num of good ones and never touch bad ports above. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-03-22Merge tag 'usb-3.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of USB fixes that resolve issues that have been reported against 3.9-rc3." * tag 'usb-3.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (37 commits) USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT USB: ssu100: fix use-after-free in TIOCMIWAIT USB: spcp8x5: fix use-after-free in TIOCMIWAIT USB: quatech2: fix use-after-free in TIOCMIWAIT USB: pl2303: fix use-after-free in TIOCMIWAIT USB: oti6858: fix use-after-free in TIOCMIWAIT USB: mos7840: fix use-after-free in TIOCMIWAIT USB: mos7840: fix broken TIOCMIWAIT USB: mct_u232: fix use-after-free in TIOCMIWAIT USB: io_ti: fix use-after-free in TIOCMIWAIT USB: io_edgeport: fix use-after-free in TIOCMIWAIT USB: ftdi_sio: fix use-after-free in TIOCMIWAIT USB: f81232: fix use-after-free in TIOCMIWAIT USB: cypress_m8: fix use-after-free in TIOCMIWAIT USB: ch341: fix use-after-free in TIOCMIWAIT USB: ark3116: fix use-after-free in TIOCMIWAIT USB: serial: add modem-status-change wait queue USB: serial: fix interface refcounting USB: io_ti: fix get_icount for two port adapters USB: garmin_gps: fix memory leak on disconnect ...
2013-03-21USB: serial: add modem-status-change wait queueJohan Hovold
Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: ulpi: Define a *otg_ulpi_create no-opFabio Estevam
Building a kernel for imx_v4_v5_defconfig with CONFIG_USB_ULPI disabled, results in the following error: arch/arm/mach-imx/built-in.o: In function 'pca100_init': platform-mx2-emma.c:(.init.text+0x6788): undefined reference to 'otg_ulpi_create' platform-mx2-emma.c:(.init.text+0x682c): undefined reference to 'mxc_ulpi_access_ops' Fix this by providing a no-op definition of *otg_ulpi_create for the case when CONFIG_USB_ULPI is not defined. Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang. 2) Insufficient space reserved for bridge netlink values, fix from Stephen Hemminger. 3) Some dst_neigh_lookup*() callers don't interpret error pointer correctly, fix from Zhouyi Zhou. 4) Fix transport match in SCTP active_path loops, from Xugeng Zhang. 5) Fix qeth driver handling of multi-order SKB frags, from Frank Blaschka. 6) fec driver is missing napi_disable() call, resulting in crashes on unload, from Georg Hofmann. 7) Don't try to handle PMTU events on a listening socket, fix from Eric Dumazet. 8) Fix timestamp location calculations in IP option processing, from David Ward. 9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig tests, from Denis V Lunev. 10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings. 11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd Bergmann. 12) bnx2x statistics don't handle 4GB rollover correctly, fix from Maciej Żenczykowski. 13) Openvswitch bug fixes for vport del/new error reporting, missing genlmsg_end() call in netlink processing, and mis-parsing of LLC/SNAP ethernet types. From Rich Lane. 14) SKB pfmemalloc state should only be propagated from the head page of a compound page, fix from Pavel Emelyanov. 15) Fix link handling in tg3 driver for 5715 chips when autonegotation is disabled. From Nithin Sujir. 16) Fix inverted test of cpdma_check_free_tx_desc return value in davinci_emac driver, from Mugunthan V N. 17) vlan_depth is incorrectly calculated in skb_network_protocol(), from Li RongQing. 18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM device mode backwards compat in cdc_ncm driver. From Bjørn Mork. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) inet: limit length of fragment queue hash table bucket lists qeth: Fix scatter-gather regression qeth: Fix invalid router settings handling qeth: delay feature trace tcp: dont handle MTU reduction on LISTEN socket bnx2x: fix occasional statistics off-by-4GB error vhost/net: fix heads usage of ubuf_info bridge: Add support for setting BR_ROOT_BLOCK flag. bnx2x: add missing napi deletion in error path drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc() ethernet/tulip: DE4x5 needs VIRT_TO_BUS isdn: hisax: netjet requires VIRT_TO_BUS net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility rtnetlink: Mask the rta_type when range checking Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally" Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug smsc75xx: configuration help incorrectly mentions smsc95xx net: fec: fix missing napi_disable call net: fec: restart the FEC when PHY speed changes skb: Propagate pfmemalloc on skb from head page only ...
2013-03-18usb: phy: ab8500-usb: update irq handling codeFabio Baltieri
Update irq handling code to notify all possible link status changes of AB8500 and AB8505 to the ux500-musb glue driver. The additional event codes will be used for pm-runtime implementation, and are defined in a separate ux500-specific header. This also modify the irq registration code to use devm_* helpers and drop all non necessary fail path code. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: phy: return -ENXIO when PHY layer isn't enabledFelipe Balbi
in cases where PHY layer isn't enabled, we want to still return an error code (actually an error pointer) so that our users don't need to cope with either error pointer of NULL. This will simplify users as below: - return IS_ERR(phy) ? PTR_ERR(phy) : -ENODEV; + return PTR_ERR(phy); Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executedKishon Vijay Abraham I
return -EPROBE_DEFER from dwc3_omap_mailbox in dwc3-omap.c, if the probe of dwc3-omap has not yet been executed or failed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: phy: introduce ->set_vbus() methodFelipe Balbi
this method will be used to enable or disable the charge pump. Whenever we have DRD devices, we need to be able to turn VBUS on or off whenever we want. Note that in the ideal case, this would be controlled by the ID-pin Interrupt, but not all devices have ID-pin properly routed since manufacturers can choose to save that trace if they're building a host-only product out of a DRD IP. This is also useful during debugging where we might not have the proper cable hanging around. Signed-off-by: Felipe Balbi <balbi@ti.com>