summaryrefslogtreecommitdiff
path: root/include/linux/mtd
AgeCommit message (Collapse)Author
2013-05-09Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
2013-05-05mtd_blktrans_ops->release() should return voidAl Viro
Both existing instances always return 0 and even if they didn't, the value would be lost on the way out. Just don't bother... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-05mtd: nand: subpage write support for hardware based ECC schemesGupta, Pekon
This patch adds support for subpage (partial-page) writes when using hardware based ECC schemes. Advantages: (1) reduces storage overhead when using file-systems like UBIFS, which store LEB header at page-size granularity. (2) allows independent subpage writes, thereby increasing NAND storage efficiency for non-page aligned data. + updated cafe_nand and lpc32xx_mlc NAND drivers for change in chip->write_page interface. Signed-off-by: Gupta, Pekon <pekon@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand_ids: improve LEGACY_ID_NAND macro a bitArtem Bityutskiy
Notice that all the flashes belonging to the "legacy ID" class have 512 bytes NAND page. This means we may simplify the 'LEGACY_ID_NAND()' macro as well as the NAND ID table a little. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: add new fields to nand_flash_dev{}Huang Shijie
As time goes on, we begin to meet the situation that we can not get enough information from some nand chips's id data. Take some Toshiba's nand chips for example. I have 4 Toshiba's nand chips in my hand: TC58NVG2S0F, TC58NVG3S0F, TC58NVG5D2, TC58NVG6D2 When we read these chips' datasheets, we will get the geometry of these chips: TC58NVG2S0F : 4096 + 224 TC58NVG3S0F : 4096 + 232 TC58NVG5D2 : 8192 + 640 TC58NVG6D2 : 8192 + 640 But we can not parse out the correct oob size for these chips from the id data. This patch adds some new fields to the nand_flash_dev{}: @id_len: the valid length of the id data. See the comments in nand_id_has_period() @oobsize: the oob size. Signed-off-by: Huang Shijie <b32955@freescale.com> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: introduce a macro for max NAND ID sequence lengthArtem Bityutskiy
Introduce a helpful macro for the maximum NAND ID sequence length instead of using the "8" magic number. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: use more reasonable integer typesArtem Bityutskiy
Use 'unsigned int' instead of 'unsigned long' in the NAND chip description data structure, because 32-bits is more than enough for our purposes. We do not need 64-bits, which is what we end up on 64-bit architectures. We declare many instances of this data structure, so this should help saving some amount of memory. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: physmap: add const qualifiersArtem Bityutskiy
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: plat-ram: add const quilifiersArtem Bityutskiy
Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: add 'const' qualifier to a couple of register functionsArtem Bityutskiy
'mtd_device_parse_register()' and 'parse_mtd_partitions()' functions accept a an array of character pointers. These functions modify neither the pointers nor the characters they point to. The characters are actually names of the MTD parsers. At the moment, the argument type is 'const char **', which means that only the names of the parsers are constant. Let's turn the argument type into 'const char * const *', which means that both names and the pointers which point to them are constant. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: provision full ID supportArtem Bityutskiy
Up until now we identified NAND chips by the 'device ID' part of the full chip ID array, which is the second full ID array byte. However, the newest flashes use the same device ID for chips with identical page and eraseblock sizes, but different OOB sizes. And unfortunately, it is not clear if there is a "standard" way to fetch the OOB size from chip's full ID array. Here is an example: Toshiba TC58NVG2S0F: 0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08 Toshiba TC58NVG3S0F: 0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08 The first one is a 512MiB NAND chip with 4KiB NAND pages, 256KiB eraseblock size and 224 bytes OOB. The second one is a 1GiB NAND chip with the same page and eraseblock sizes, but with 232 bytes OOB. This means that we have to store full ID in our NAND flashes table in order to distinguish between these 2. This patch adds the 'id[8]' field to the 'struct nand_flash_dev' structure, and it makes it to be a part of anonymous union, where the second member is a structure containing the 'mfr_id' and 'dev_id' bytes. The union makes sure that 'mfr_id' refers the same RAM address as 'id[0]' and 'dev_id' refers the same RAM address as 'id[1]'. The only motivation for the union is an assumption that 'type->dev_id' is more readable than 'type->id[1]'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand_ids: introduce helper macrosArtem Bityutskiy
Introduce helper macros for defining NAND chips. These macros do not really add much value in the current code-base. However, we are going to add full ID support which adds some more complexity to the table, and helper macros become useful for readability. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: rename the id field of 'struct nand_flash_dev'Artem Bityutskiy
The 'id' is a bit confusing name because NAND IDs are multi-byte. Re-name it to 'dev_id' to make it clear that this is the "device ID" part (the second byte). While on it, clean-up the commentary for 'struct nand_flash_dev'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: use NAND_HAS_CACHEPROGArtem Bityutskiy
We have this unused macro, let's use it and justify its existence. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: remove NAND_COPYBACK macroArtem Bityutskiy
It is unused. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: remove NAND_NO_PADDING macroArtem Bityutskiy
It is not used anywhere. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: remove a bunch of unused commandsArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-04-05mtd: nand: remove AG-AND supportArtem Bityutskiy
We have only one AG-AND driver and it was not touched since 2005. It looks like AG-AND was not really make it to mass-production and can be considered a dead technology. Along with the AG-AND support, this patch removes the BBT_AUTO_REFRESH feature, because the only user of this feature is AG-AND. And even though it is implemented as a generic feature, I prefer to remove it because NAND flashes do not really need it in this form. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-14mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDYBrian Norris
This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e ("mtd: nand: kill NAND_NO_READRDY"). In that patch I overlooked a few things. The original documentation for NAND_NO_READRDY included "True for all large page devices, as they do not support autoincrement." I was conflating "not support autoincrement" with the NAND_NO_AUTOINCR option, which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I concluded that I then could harmlessly drop NAND_NO_READRDY. But of course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean NAND_NO_READRDY was doing nothing... So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied only to those few remaining small-page NAND which needed it in the first place. Cc: stable@kernel.org [3.5+] Reported-by: Alexander Shiyan <shc_work@mail.ru> Tested-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-02-22mtd: map: BUG() in non handled casesDmitry Eremin-Solenikov
Several map-related functions look like a serie of ifs, checking widths of map. Those functions do not have any handling for default case. Instead of fiddling with uninitialized_var in those functions, let's just add a (correct) BUG() to the default case on those maps. This will also allow us to catch potential errors in maps setup in future. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-02-04mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) lockingStefan Roese
Currently cfi_cmdset_0002.c does not support PPB locking of sectors. This patch adds support for this locking/unlocking mechanism. It is needed on some platforms, since newer U-Boot versions do support this PPB locking and protect for example their environment sector(s) this way. This PPB locking/unlocking will be enabled for all devices supported by cfi_cmdset_0002 reporting 8 in the CFI word 0x49 (Sector Protect/Unprotect scheme). Please note that PPB locking does support sector-by-sector locking. But the whole chip can only be unlocked together. So unlocking one sector will automatically unlock all sectors of this device. Because of this chip limitation, the PPB unlocking function saves the current locking status of all sectors before unlocking the whole device. After unlocking the saved locking status is re-configured. This way only the addressed sectors will be unlocked. To selectively enable this advanced sector protection mechanism, the device-tree property "use-advanced-sector-protection" has been created. To enable support for this locking this property needs to be present in the flash DT node. E.g.: nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; use-advanced-sector-protection; ... Tested with Spansion S29GL512S10THI and Micron JS28F512M29EWx flash devices. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus widthMatthieu CASTET
The driver call nand_scan_ident in 8 bit mode, then readid or onfi detection are done (and detect bus width). The driver should update its bus width before calling nand_scan_tail. This work because readid and onfi are read work 8 byte mode. Note that nand_scan_ident send command (NAND_CMD_RESET, NAND_CMD_READID, NAND_CMD_PARAM), address and read data The ONFI specificication is not very clear for x16 device if high byte of address should be driven to 0, but according to [1] it should be ok to not drive it during autodetection. [1] 3.3.2. Target Initialization [...] The Read ID and Read Parameter Page commands only use the lower 8-bits of the data bus. The host shall not issue commands that use a word data width on x16 devices until the host determines the device supports a 16-bit data bus width in the parameter page. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-21mtd: mtd_blkdevs: Replace request handler kthread with a workqueueEzequiel Garcia
By replacing a kthread with a workqueue, the code is now a bit clearer. There's also a slight reduction of code size (numbers apply for x86): Before: text data bss dec hex filename 3248 36 0 3284 cd4 drivers/mtd/mtd_blkdevs.o After: text data bss dec hex filename 3150 36 0 3186 c72 drivers/mtd/mtd_blkdevs.o Due to lack of real hardware, tests have been performed on an emulated environment with mtdswap and mtdblock over nandsim devices. Some real testing should be done, before merging this patch. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16mtd: uninitialized variable warning in map.hArnd Bergmann
The map_word_load() function initializes exactly as many words in the buffer as required, but gcc cannot figure this out and gives a misleading warning. Marking the local variable as uninitialized_var shuts up that warning. Without this patch, building acs5k_defconfig results in: drivers/mtd/chips/cfi_cmdset_0002.c: In function 'cfi_amdstd_panic_write': include/linux/mtd/map.h:331:11: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] drivers/mtd/chips/cfi_cmdset_0002.c: In function 'cfi_amdstd_write_words': include/linux/mtd/map.h:331:11: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] drivers/mtd/chips/cfi_cmdset_0001.c: In function 'cfi_intelext_write_words': include/linux/mtd/map.h:331:11: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16mtd: diskonchip: use inline functions for DocRead/DocWriteArnd Bergmann
The diskonchip drivers traditionally use home-grown macros for doing MMIO accesses, which cause a lot of warnings, at least on ARM machines: drivers/mtd/devices/doc2000.c: In function 'doc_write': drivers/mtd/devices/doc2000.c:854:5: warning: value computed is not used [-Wunused-value] drivers/mtd/devices/doc2000.c: In function 'doc_erase': drivers/mtd/devices/doc2000.c:1123:5: warning: value computed is not used [-Wunused-value drivers/mtd/nand/diskonchip.c: In function 'doc2000_read_byte': drivers/mtd/nand/diskonchip.c:318:3: warning: value computed is not used [-Wunused-value] A nicer solution is to use the architecture-defined I/O accessors. Here, we use the __raw_readl/__raw_writel style, instead of the proper readl/writel ones, in order to preserve the odd semantics of the existing macros that have their own barrier implementation and no byte swap. It would be nice to fix this properly and use the correct accessors as well as make the word size independent from the architecture, but I guess the hardware is obsolete enough that we should better not mess the driver an more than necessary. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: map: Fix compilation warningViresh Kumar
This patch is an attempt to fix following compilation warning. In file included from drivers/mtd/chips/cfi_cmdset_0001.c:35:0: drivers/mtd/chips/cfi_cmdset_0001.c: In function 'cfi_intelext_write_words': include/linux/mtd/map.h:331:11: warning: 'r.x[0]' may be used uninitialized in this function [-Wmaybe-uninitialized] I could have used uninitialized_var() too, but didn't used it as the final else part of map_word_load() is missing. So there is a chance that it might be passed uninitialized. Better initialize to zero. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: Fix kernel-doc content to avoid warning.Robert P. J. Day
Add missing colons to fix kernel-doc generation warnings. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: sh_flctl: Add DMA capabiltyBastian Hecht
The code probes if DMA channels can get allocated and tears them down at removal/failure if needed. If available it uses them to transfer the data part (not ECC). On failure we fall back to PIO mode. Based on Guennadi Liakhovetski's code from the sh_mmcif driver. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: sh_flctl: Minor cleanupsBastian Hecht
Some small fixes to avoid sparse and smatch complain. Other cosmetic fixes as well. - Change of the type of the member index in struct sh_flctl from signed to unsigned. We use index by addressing array members, so unsigned is more concise here. Adapt functions relying on sh_flctl::index. - Remove a blurring cast in write_fiforeg(). - Apply consistent naming scheme when refering to the data buffer. - Shorten some unnecessarily verbose functions. - Remove spaces at start of lines. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: gpmi: remove unneccessary headerHuang Shijie
The whole gpmi-nand driver has turned to pure devicetree supported. So the linux/mtd/gpmi-nand.h is not neccessary now. Just remove it, and move some macros to the gpmi-nand driver itself. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: nand: Increase the ecc placement locations to 640Vipin Kumar
Few devices like H27UBG8T2CTR have a writesize/oobsize of 8KB/640B. This means that the maximum oobsize has gone up to 640 bytes and consequently the maximum ecc placement locations have also gone up to 640. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-15mtd: fsmc_nand: pass the ale and cmd resource via resourceJean-Christophe PLAGNIOL-VILLARD
Do not use the platform_data to pass resource and be smart in the drivers. Just pass it via resource Switch to devm_request_and_ioremap at the sametime Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-By: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-09Merge tag 'disintegrate-mtd-20121009' of ↵David Woodhouse
git://git.infradead.org/users/dhowells/linux-headers UAPI Disintegration 2012-10-09 Conflicts: MAINTAINERS arch/arm/configs/bcmring_defconfig arch/arm/mach-imx/clk-imx51-imx53.c drivers/mtd/nand/Kconfig drivers/mtd/nand/bcm_umi_nand.c drivers/mtd/nand/nand_bcm_umi.h drivers/mtd/nand/orion_nand.c
2012-09-29mtd: nand: increase max OOB size to 640Brian Norris
Some Hynix and Samsung MLC NAND have 640B OOB size. Sooner or later, we should dynamically allocate the buffers that use these macros. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: add helpers to get the supportted ONFI timing modeHuang Shijie
add onfi_get_async_timing_mode() to get the supportted asynchronous timing mode. add onfi_get_sync_timing_mode() to get the supportted synchronous timing mode. Also add the neccessary macros : the timing modes. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: add helpers to set/get features for ONFI nandHuang Shijie
Add the set-features(0xef)/get-features(0xee) helpers for ONFI nand. Also add the necessary macros. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: expand description of read_page method in comment headerMike Dunn
In the absence of any formal documentation of the nand interface, I thought this patch to the header file might be helpful. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: Added a device flag for subpage read supportJeff Westfahl
Added a NAND device flag for subpage read support. Previously this was hard coded based on large page and soft ECC. Updated base NAND driver to use the new subpage read flag if the NAND is large page and soft ECC. Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: fix kernel-doc warning in include/linux/mtd/nand.hRandy Dunlap
Fix kernel-doc warning in <linux/mtd/nand.h>: Warning(include/linux/mtd/nand.h:659): No description found for parameter 'read_byte' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: kill MTD_NAND_VERIFY_WRITEHuang Shijie
Just as Artem suggested: "Both UBI and JFFS2 are able to read verify what they wrote already. There are also MTD tests which do this verification. So I think there is no reason to keep this in the NAND layer, let alone wasting RAM in the driver to support this feature. Besides, it does not work for sub-pages and many drivers have it broken. It hurts more than it provides benefits." So kill MTD_NAND_VERIFY_WRITE entirely. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driverBrian Norris
The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Huang Shijie <shijie8@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driverRoland Stigge
This patch makes the MLC NAND driver independent of the single AMBA DMA engine driver by using the platform data provided dma_filter callback. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driverRoland Stigge
This patch makes the SLC NAND driver independent of the single AMBA DMA engine driver by using the platform data provided dma_filter callback. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-04mtd: mtdparts: introduce mtd_get_device_sizeRichard Genoud
'mtd_get_device_size()' returns the size of the whole MTD device, that is the mtd_info master size. This will be used by UBI to calculate the maximum number of bad blocks (MBB) on a MTD device. Artem: amended the patch a bit. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04mtd: mark mtd_is_partition argument as constantRichard Genoud
'struct mtd_info' is not modified by 'mtd_is_partition()' so it can be marked as "const". Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-07-06mtd: Better comment NAND_BBT_NO_OOBShmulik Ladkani
Amend the comment to reflect the fact NAND_BBT_NO_OOB refers to the location of the bad block table marker. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-07-06mtd: nand: teach write_page and write_page_raw return an error codeJosh Wu
There is an implemention of hardware ECC write page function which may return an error indication. For instance, using Atmel HW PMECC to write one page into a nand flash, the hardware engine will compute the BCH ecc code for this page. so we need read a the status register to theck whether the ecc code is generated. But we cannot assume the status register always can be ready, for example, incorrect hardware configuration or hardware issue, in such case we need write_page() to return a error code. Since the definition of 'write_page' function in struct nand_ecc_ctrl is 'void'. So this patch will: 1. add return 'int' value for 'write_page' function. 2. to be consitent, add return 'int' value for 'write_page_raw' fuctions too. 3. add code to test the return value, and if negative, indicate an error happend when write page with ECC. 4. fix the compile warning in all impacted nand flash driver. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-07-06mtd: nand: kill NAND_NO_READRDYBrian Norris
According to its documentation, the NAND_NO_READRDY option is always used when autoincrement is not supported. Autoincrement support was recently dropped, so we can drop this options as well (defaulting to "no read ready check"). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-07-06mtd: nand: remove NAND_BBT_SEARCH optionBrian Norris
This option was never used and isn't currently used. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-07-06mtd: nand: add Eon Silicon Solutions manufacturer IDBrian Norris
Eon's new NAND flash: EN27LN1G08. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>