summaryrefslogtreecommitdiff
path: root/include/linux/mfd/tmio.h
AgeCommit message (Collapse)Author
2012-07-21mmc: tmio: support caps2 flagsGuennadi Liakhovetski
Allow tmio mmc glue drivers to pass mmc_host::caps2 flags down to the mmc layer. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-21mmc: tmio: add callbacks to enable-update and disable the interface clockGuennadi Liakhovetski
Every time the clock is enabled after possibly being disabled, we have to re-read its frequency and update our configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-27mmc: tmio_mmc: power status flag doesn't have to be exposed in platform dataGuennadi Liakhovetski
The controller power status flag does not have to be accessed from the hot-plug detection code any more, it can now be removed from the platform data and put in the controller private struct. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-27mmc: tmio_mmc: support the generic MMC GPIO card hotplug helperGuennadi Liakhovetski
If the platform specifies the TMIO_MMC_HAS_COLD_CD flag, use the generic MMC GPIO card hotplug helper. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20mmc: sdhi: Add write16_hookSimon Horman
Some controllers require waiting for the bus to become idle before writing to some registers. I have implemented this by adding a hook to sd_ctrl_write16() and implementing a hook for SDHI which waits for the bus to become idle. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: tmio: runtime suspend the controller, where possibleGuennadi Liakhovetski
The TMIO MMC controller cannot be powered off to save power, when no card is plugged in, because then it will not be able to detect a new card-insertion event. On some implementations, however, it is possible to switch to using another source to detect card insertion. This patch adds support for such implementations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: tmio_mmc: implement SDIO IRQ supportArnd Hannemann
This patch implements SDIO IRQ support for mfds which announce the TMIO_MMC_SDIO_IRQ flag for tmio_mmc. If MMC_CAP_SDIO_IRQ is also set SDIO IRQ signalling is activated. Tested with a b43-based wireless SDIO card and sh_mobile_sdhi. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: tmio_mmc: implement a bounce buffer for unaligned DMAGuennadi Liakhovetski
For example, with SDIO WLAN cards, some transfers happen with buffers at odd addresses, whereas the SH-Mobile DMA engine requires even addresses for SDHI. This patch extends the tmio driver with a bounce buffer, that is used for single entry scatter-gather lists both for sending and receiving. If we ever encounter unaligned transfers with multi-element sg lists, this patch will have to be extended. For now it just falls back to PIO in this and other unsupported cases. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-29mmc: Allow 2 byte requests in 4-bit mode for tmio_mmcYusuke Goda
Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit mode if the hardware supports it. Tested with the SDHI hardware block included in sh7724. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Magnus Damm <damm@opensource.se> Tested-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mmc: Allow the tmio_mmc mfd driver to specify get_cd handlerArnd Hannemann
Some controllers, supported by the tmio_mmc driver do not have the card detect pin of a slot connected, so that polling needs to be used and card detection is handled by other means. This patch exposes a get_cd hook for that purpose. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-22mmc: let MFD's provide supported Vdd card voltages to tmio_mmcGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22tmio: add a platform flag to disable card write-protection detectionGuennadi Liakhovetski
Write-protection status is not always available, e.g., micro-SD cards do not have a write-protection switch at all. This patch adds a flag to let platforms force tmio_mmc to consider the card writable. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cellGuennadi Liakhovetski
After this patch, if the "dma" pointer in struct tmio_mmc_data is not NULL, it points to a struct, containing two tokens, that have to be passed to the dmaengine driver for channel configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-07tmio_mmc: Remove const from platform data V3Magnus Damm
Remove const from the tmio-mmc platform data hclk V3. This change makes it possible to remove the type cast from the sh_mobile_sdhi driver which is using the clock framework to get the clock rate. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2Yusuke Goda
Enable MMC_CAP_XX support in the tmio_mmc driver if pdata->capabilities is set. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-01-18mfd: tmio_mmc hardware abstraction for CNF areaIan Molton
This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-17mfd: fix tmio related warningsSamuel Ortiz
We can not have .driver_data as const since platform_set_drvdata() doesnt take a const. The hclk mmc_data field can be const though. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-06-13MFD,mmc: tmio_mmc: make HCLK configurablePhilipp Zabel
The Toshiba parts all have a 24 MHz HCLK, but HTC ASIC3 has a 24.576 MHz HCLK and AMD Imageon w228x's HCLK is 80 MHz. With this patch, the MFD driver provides the HCLK frequency to tmio_mmc via mfd_cell->driver_data. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2008-10-16fbdev: add new TMIO framebuffer driverDmitry Baryshkov
Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB chips. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-10mfd: TMIO MMC structures and accessors.Ian Molton
Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-07[ARM] 5128/1: tc6393xb: tmio-nand supportDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 06:34:08 +0000