summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)Author
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-10Merge tag 'armsoc-devicetree' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-09-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-09Merge tag 'iommu-updates-v4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "Slightly more changes than usual this time: - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries to preserve the mappings of the kernel so that master aborts for devices are avoided. Master aborts cause some devices to fail in the kdump kernel, so this code makes the dump more likely to succeed when AMD IOMMU is enabled. - common flush queue implementation for IOVA code users. The code is still optional, but AMD and Intel IOMMU drivers had their own implementation which is now unified. - finish support for iommu-groups. All drivers implement this feature now so that IOMMU core code can rely on it. - finish support for 'struct iommu_device' in iommu drivers. All drivers now use the interface. - new functions in the IOMMU-API for explicit IO/TLB flushing. This will help to reduce the number of IO/TLB flushes when IOMMU drivers support this interface. - support for mt2712 in the Mediatek IOMMU driver - new IOMMU driver for QCOM hardware - system PM support for ARM-SMMU - shutdown method for ARM-SMMU-v3 - some constification patches - various other small improvements and fixes" * tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/vt-d: Don't be too aggressive when clearing one context entry iommu: Introduce Interface for IOMMU TLB Flushing iommu/s390: Constify iommu_ops iommu/vt-d: Avoid calling virt_to_phys() on null pointer iommu/vt-d: IOMMU Page Request needs to check if address is canonical. arm/tegra: Call bus_set_iommu() after iommu_device_register() iommu/exynos: Constify iommu_ops iommu/ipmmu-vmsa: Make ipmmu_gather_ops const iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable iommu/amd: Rename a few flush functions iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY iommu/mediatek: Fix a build warning of BIT(32) in ARM iommu/mediatek: Fix a build fail of m4u_type iommu: qcom: annotate PM functions as __maybe_unused iommu/pamu: Fix PAMU boot crash memory: mtk-smi: Degrade SMI init to module_init iommu/mediatek: Enlarge the validate PA range for 4GB mode iommu/mediatek: Disable iommu clock when system suspend iommu/mediatek: Move pgtable allocation into domain_alloc iommu/mediatek: Merge 2 M4U HWs into one iommu domain ...
2017-09-07Merge tag 'leds_for_4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED class drivers improvements: leds-pca955x: - add Device Tree support and bindings - use devm_led_classdev_register() - add GPIO support - prevent crippled LED class device name - check for I2C errors leds-gpio: - add optional retain-state-shutdown DT property - allow LED to retain state at shutdown leds-tlc591xx: - merge conditional tests - add missing of_node_put leds-powernv: - delete an error message for a failed memory allocation in powernv_led_create() leds-is31fl32xx.c - convert to using custom %pOF printf format specifier Constify attribute_group structures in: - leds-blinkm - leds-lm3533 Make several arrays static const in: - leds-aat1290 - leds-lp5521 - leds-lp5562 - leds-lp8501" * tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: check for I2C errors leds: gpio: Allow LED to retain state at shutdown dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create() leds: lp8501: make several arrays static const leds: lp5562: make several arrays static const leds: lp5521: make several arrays static const leds: aat1290: make array max_mm_current_percent static const leds: pca955x: Prevent crippled LED device name leds: lm3533: constify attribute_group structure dt-bindings: leds: add pca955x leds: pca955x: add GPIO support leds: pca955x: use devm_led_classdev_register leds: pca955x: add device tree support leds: Convert to using %pOF instead of full_name leds: blinkm: constify attribute_group structures. leds: tlc591xx: add missing of_node_put leds: tlc591xx: merge conditional tests
2017-09-05Merge branch 'next/dt64' into next/dtOlof Johansson
* next/dt64: (233 commits) arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names ARM64: dts: meson-gx: Add AO CEC nodes ARM64: dts: meson-gx: update AO clkc to new bindings arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: zynqmp: Add generic compatible string for I2C EEPROM ...
2017-08-31clk: stm32h7: Add stm32h743 clock driverGabriel Fernandez
This patch enables clocks for STM32H743 boards. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> for MFD changes: Acked-by: Lee Jones <lee.jones@linaro.org> for DT-Bindings Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31Merge tag 'sunxi-clk-for-4.14-3' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull more Allwinner clock changes from Maxime Ripard: * Conversion of the last two SoCs (A10, A20) to the sunxi-ng framework * tag 'sunxi-clk-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: Add sun4i/sun7i CCU driver dt-bindings: List devicetree binding for the CCU of Allwinner A10 dt-bindings: List devicetree binding for the CCU of Allwinner A20
2017-08-24Merge tag 'v4.14-rockchip-dts32-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "second round of Rockchip dts32 changes for 4.14" from Heiko Stübner: A lot of attention for the rv1108 soc targetted at media-processing (usb, operating points, spi, pwm, adc, watchdog, i2c and devices for its evb). RK3228/3229 gets iommu and spi nodes. Similar to the rk3288 which also gets some more iommu nodes as well as getting converted to 64 bit addresses due to wanting to address more than 4GB of memory via LPAE. * tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: rockchip: add cpu power supply for rv1108 evb ARM: dts: rockchip: add cpu opp table for rv1108 ARM: dts: rockchip: add rk322x iommu nodes ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb ARM: dts: rockchip: add pwm backlight for rv1108 evb ARM: dts: rockchip: add pwm dt nodes for rv1108 ARM: dts: rockchip: add spi dt node for rv1108 ARM: dts: rockchip: add saradc support for rv1108 ARM: dts: rockchip: add watchdog dt node for rv1108 ARM: dts: rockchip: add i2c dt nodes for rv1108 clk: rockchip: fix up indentation of some RV1108 clock-ids clk: rockchip: rename the clk id for HCLK_I2S1_2CH clk: rockchip: add more clk ids for rv1108 ARM: dts: rockchip: add more iommu nodes on rk3288 ARM: dts: rockchip: convert rk3288 device tree files to 64 bits ARM: dts: rockchip: add spi node and spi pinctrl on rk3228/rk3229 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-24clk: sunxi-ng: Add sun4i/sun7i CCU driverPriit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20 series SoCs. Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-23clk: msm8996-gcc: add missing smmu clksSrinivas Kandagatla
This patch adds missing LPASS smmu clks which are required by the audio driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-23Merge tag 'clk-renesas-for-v4.14-tag1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull Renesas clk driver updates from Geert Uytterhoeven: * Add more module clocks for R-Car V2H and M3-W, * Add support for the R-Car Gen3 USB 2.0 clock selector PHY, * Add support for the new R-Car D3 SoC, * Allow compile-testing of all (sub)drivers now all dummy infrastructure is available, * Small fixes and cleanups. * tag 'clk-renesas-for-v4.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add USB3.0 clock clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY clk: renesas: cpg-mssr: Add R8A77995 support clk: renesas: rcar-gen3: Add support for SCCG/Clean peripheral clocks clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3 clk: renesas: Add r8a77995 CPG Core Clock Definitions clk: renesas: rcar-gen3-cpg: Refactor checks for accessing the div table clk: renesas: rcar-gen3-cpg: Drop superfluous variable clk: renesas: Allow compile-testing of all (sub)drivers clk: renesas: r8a7792: Add IMR-LX3/LSX3 clocks clk: renesas: div6: Document fields used for parent selection
2017-08-23Merge tag 'v4.14-rockchip-clk1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull Rockchip clk driver updates from Heiko Stuebner: The biggest change is fixing the jitter on the fractional clock-type Rockchip socs experience with the default approximation. For that we introduce the ability to override it with a clock-specific approximation and use that to create the needed rate settings as described in the Rockchip soc manuals (same for all Rockchip socs). Apart from that we have support for the rk3126 clock controller which is similar to the rk3128 with some minimal differences and a lot of improvements and fixes for the rv1108 clock controller (missing clocks, some clock-ids, naming fixes, register fixes). * tag 'v4.14-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: fix the rv1108 clk_mac sel register description clk: rockchip: rename rv1108 macphy clock to mac clk: rockchip: add rv1108 ACLK_GMAC and PCLK_GMAC clocks clk: rockchip: add rk3228 SCLK_SDIO_SRC clk id clk: rockchip: add rv1108 ACLK_GAMC and PCLK_GMAC ID clk: rockchip: add rk3228 sclk_sdio_src ID clk: rockchip: add special approximation to fix up fractional clk's jitter clk: fractional-divider: allow overriding of approximation clk: rockchip: modify rk3128 clk driver to also support rk3126 dt-bindings: add documentation for rk3126 clock clk: rockchip: add some critical clocks for rv1108 SoC clk: rockchip: rename some of clks for rv1108 SoC clk: rockchip: fix up some clks describe error for rv1108 SoC clk: rockchip: support more clks for rv1108 clk: rockchip: fix up the pll clks error for rv1108 SoC clk: rockchip: support more rates for rv1108 cpuclk clk: rockchip: fix up indentation of some RV1108 clock-ids clk: rockchip: rename the clk id for HCLK_I2S1_2CH clk: rockchip: add more clk ids for rv1108
2017-08-23Merge tag 'sunxi-clk-for-4.14-2' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next Pull Allwinner clock changes from Chen-Yu Tsai: * Added support for fixed post-divider on divider and NKM-style clocks * Added driver for R40 CCU * Fix sunxi-ng/ccu-sunxi-r.h header file guard macro typo * Make fractional clock modes really used and correctly configured * Make H3 cpu clock rate change correctly to be used with cpufreq * tag 'sunxi-clk-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: support R40 SoC dt-bindings: add compatible string for Allwinner R40 CCU clk: sunxi-ng: nkm: add support for fixed post-divider clk: sunxi-ng: div: Add support for fixed post-divider dt-bindings: clock: sunxi-ccu: Add compatibles for sun5i CCU driver clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3 clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change clk: sunxi-ng: Wait for lock when using fractional mode clk: sunxi-ng: Make fractional helper less chatty clk: sunxi-ng: multiplier: Fix fractional mode clk: sunxi-ng: Fix fractional mode for N-M clocks clk: sunxi-ng: Fix header guard of ccu-sun8i-r.h
2017-08-22iommu/mediatek: Move MTK_M4U_TO_LARB/PORT into mtk_iommu.cYong Wu
The definition of MTK_M4U_TO_LARB and MTK_M4U_TO_PORT are shared by all the gen2 M4U HWs. Thus, Move them out from mt8173-larb-port.h, and put them into the c file. Suggested-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-22clk: rockchip: rename rv1108 macphy clock to macElaine Zhang
This MAC has no internal phy for rv1108 and the whole clock infrastructure hasn't been used yet, so is safe to fix. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-22clk: rockchip: add rv1108 ACLK_GAMC and PCLK_GMAC IDElaine Zhang
This patch exports gmac aclk and pclk for dts reference. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-22clk: rockchip: add rk3228 sclk_sdio_src IDElaine Zhang
This patch exports sdio src clock for dts reference. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-19clk: sunxi-ng: support R40 SoCIcenowy Zheng
Allwinner R40 SoC have a clock controller module in the style of the SoCs beyond sun6i, however, it's more rich and complex. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-19Merge tag 'reset-for-4.14' of git://git.pengutronix.de/git/pza/linux into ↵Arnd Bergmann
next/drivers Pull "Reset controller changes for v4.14" from Philipp Zabel: - constify zx2967 reset_ops - add a convenience API to manage an array of resets - let deassert report success and let assert report success for shared resets if the reset controller driver does not implement (de)assert. - add HSDKv1 reset driver - remove Gemini reset controller, the driver is made obsolete by a combined clock/reset driver in drivers/clk - fix the total number of reset lines in the sunxi driver - various uniphier updates and fixes: - remove sLD3 SoC support - simplify system reset register and bit definitions - add audio systems, video input subsystem, and analog amplifiers reset controls * tag 'reset-for-4.14' of git://git.pengutronix.de/git/pza/linux: reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control reset: uniphier: add audio systems reset control reset: sunxi: fix number of reset lines reset: uniphier: do not use per-SoC macro for system reset block reset: uniphier: remove sLD3 SoC support Revert "reset: Add a Gemini reset controller" ARC: reset: introduce HSDKv1 reset driver reset: make (de)assert report success for self-deasserting reset drivers reset: Add APIs to manage array of resets reset: zx2967: constify zx2967_reset_ops.
2017-08-18Merge tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek into ↵Arnd Bergmann
next/drivers Pull "arm: mediatek: soc updates for v4.14" from Matthias Brugger: - add mt7623a smp support - scpsys: reduce code duplication - scpsys: add mt7622 support - pmic wrapper: make of_device_ids constant * tag 'v4.13-next-soc' of https://github.com/mbgg/linux-mediatek: soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC soc: mtk-pmic-wrap: make of_device_ids const. ARM: mediatek: add MT7623a smp bringup code
2017-08-17Merge tag 'keystone_dts_for_4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Pull "ARM: Keystone DTS for 4.14" from Santosh Shilimkar: Contents: - ti-sci power domain, clock and reset controller support - DSP nodes for k2h/k2l/k2e evms - DSP CMA memory pools for k2h/k2l/k2e/keg evms - MMC/hsmmc suport for k2g - eDMA support for k2g - DCAN support for k2g * tag 'keystone_dts_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (22 commits) ARM: dts: keystone-k2g-ice: Add and enable DSP CMA memory pool ARM: dts: keystone-k2g-evm: Add and enable DSP CMA memory pool ARM: dts: keystone-k2g: Add DSP node ARM: dts: k2g: Add DCAN nodes dt-bindings: net: c_can: Update binding for clock and power-domains property ARM: dts: keystone-k2g-evm: Enable MMC0 and MMC1 ARM: dts: keystone-k2g: add MMC0 and MMC1 nodes ARM: dts: keystone-k2g: Add eDMA nodes dt-bindings: ti,omap-hsmmc: Add 66AK2G mmc controller dt-bindings: ti,edma: Add 66AK2G specific information ARM: dts: keystone-k2g: Add gpio nodes ARM: dts: keystone-k2e-evm: Add and enable DSP CMA memory pool ARM: dts: keystone-k2l-evm: Add and enable common DSP CMA memory pool ARM: dts: keystone-k2hk-evm: Add and enable common DSP CMA memory pool ARM: dts: keystone-k2e: Add DSP node ARM: dts: keystone-k2l: Add DSP nodes ARM: dts: keystone-k2hk: Add DSP nodes ARM: dts: keystone-k2g: Add TI SCI reset-controller node ARM: dts: keystone-k2g: Add ti-sci clock provider node ARM: dts: keystone-k2g: Add ti-sci power domain node ...
2017-08-16Merge tag 'renesas-drivers-for-v4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Pull "Renesas ARM Based SoC Drivers Updates for v4.14" from Simon Horman: Add R-Car D3 (r8a77995) support to the Renesas-specific SoC drivers - SoC identification - System controller - Reset controller * tag 'renesas-drivers-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-rst: Add support for R-Car D3 soc: renesas: rcar-sysc: Add support for R-Car D3 power areas soc: renesas: Add r8a77995 SYSC PM Domain Binding Definitions soc: renesas: Identify R-Car D3
2017-08-16clk: renesas: Add r8a77995 CPG Core Clock DefinitionsGeert Uytterhoeven
Add all R-Car D3 Clock Pulse Generator Core Clock Outputs, as listed in Table 8.2f ("List of Clocks [R-Car D3]") of the R-Car Series, 3rd Generation Hardware User's Manual (Rev. 0.55, Jun. 30, 2017). Note that internal CPG clocks (S0, S1, S2, S3, S1C, S3C, SDSRC, and SSPSRC) are not included, as they are used as internal clock sources only, and never referenced from DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-15pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtypeFenglin Wu
GPIO LV (low voltage)/MV (medium voltage) subtypes have different features and register mappings than 4CH/8CH subtypes. Add support for LV and MV subtypes. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14leds: pca955x: add GPIO supportCédric Le Goater
The PCA955x family of chips are I2C LED blinkers whose pins not used to control LEDs can be used as general purpose I/Os (GPIOs). The following adds such a support by defining different operation modes for the pins (See bindings documentation for more details). The pca955x driver is then extended with a gpio_chip when some of pins are operating as GPIOs. The default operating mode is to behave as a LED. The GPIO support is conditioned by CONFIG_LEDS_PCA955X_GPIO. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-14soc: mediatek: add header files required for MT7622 SCPSYS dt-bindingChen Zhong
Add relevant header files required for dt-bindings of SCPSYS power domain control for all subsystems found on MT7622 SoC. Signed-off-by: Chen Zhong <chen.zhong@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-08-10ARM: dts: Add dra7 iodelay configurationTony Lindgren
Add dra7 iodelay configuration. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-06clk: rockchip: fix up indentation of some RV1108 clock-idsElaine Zhang
Make the code look better. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-06clk: rockchip: rename the clk id for HCLK_I2S1_2CHElaine Zhang
i2s1 has 2 channels but not 8 channels. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [and the clock id hasn't been used in either clock-driver nor dts, so is safe to rename] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-06clk: rockchip: add more clk ids for rv1108Elaine Zhang
Add new clk ids for the peripherals on rv1108 soc. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-04dt-bindings: clock: gxbb-aoclk: Add CEC 32k clockNeil Armstrong
This patchadds the clock binding entry for the CEC 32K AO Clock. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-04clk: meson: gxbb: Add sd_emmc clk0 clkidsJerome Brunet
Add the clkids for the clocks feeding the input0 of the mmc controllers Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-04clk: meson-gxbb: expose almost every clock in the bindingsJerome Brunet
Expose all clocks which maybe used as DT bindings Only clock ids internal the controller remain un-exposed Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-08-04clk: meson8b: expose every clock in the bindingsJerome Brunet
Expose all clocks which maybe used as DT bindings Only clock ids internal the controller remain un-exposed (none on this particular controller at the moment) Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-07-31dt-bindings: clock: meson8b: describe the embedded reset controllerMartin Blumenstingl
The Amlogic Meson8/Meson8b/Meson8m2 clock controller provides some reset lines. These are used for example to boot the secondary CPU cores. This patch describes the reset controller which is embedded into the clock controller on these SoCs. A header file is provided which provides preprocessor macros for each reset line (to make the .dts files easier to read). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-07-27soc: renesas: Add r8a77995 SYSC PM Domain Binding DefinitionsGeert Uytterhoeven
Add power domain indices for R-Car D3. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-21dt-bindings: Drop k2g genpd device ID macrosDave Gerlach
Commit 7cc119f29b19 ("dt-bindings: Add TI SCI PM Domains") introduced a number of K2G_DEV_x macros to represent each device ID available on the K2G platform for use by the genpd, clock, and reset drivers. Rather than use these macros, which are only used in the device tree for property values and not actually used by the drivers, let's just use the device ID number directly in the device tree to avoid macro bloat. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-07-20dt-bindings: power: add RK3366 SoCs header for power-domainElaine Zhang
According to a description from TRM, add all the power domains. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-20ARC: reset: introduce HSDKv1 reset driverEugeniy Paltsev
The HSDK v1 periphery IPs can be reset by accessing some registers from the CGU block. The list of available reset lines is documented in the DT bindings. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-07-18pinctrl: samsung: dt-bindings: Use better name for external interrupt functionKrzysztof Kozlowski
On Exynos, 0xf is always used as value of external interrupt in pin mux function thus a more descriptive macro name can be used. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-11dt-bindings: Document img,boston-clock bindingPaul Burton
Add device tree binding documentation for the clocks provided by the MIPS Boston development board from Imagination Technologies, and a header file describing the available clocks for use by device trees & driver. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-07-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we've got one core change to introduce a bulk clk_get API, some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits) clk: gemini: Read status before using the value clk: scpi: error when clock fails to register clk: at91: Add sama5d2 suspend/resume gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K clk: keystone: TI_SCI_PROTOCOL is needed for clk driver clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL clk: uniphier: provide NAND controller clock rate clk: hisilicon: add usb2 clocks for hi3798cv200 SoC clk: Add Gemini SoC clock controller clk: iproc: Remove __init marking on iproc_pll_clk_setup() clk: bcm: Add clocks for Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC clk: mediatek: export cpu multiplexer clock for MT8173 SoCs clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work clk: renesas: cpg-mssr: Use of_device_get_match_data() helper clk: hi6220: add acpu clock clk: zx296718: export I2S mux clocks clk: imx7d: create clocks behind rawnand clock gate clk: hi3660: Set PPLL2 to 2880M ...
2017-07-04Merge tag 'armsoc-dt64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-07-04Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. New machines: - The new Action Semi S500 platform is added along with initial support for the LeMaker Guitar board. - STM32 gains support for three new boards: stm32h743-disco, stm32f746-disco, and stm32f769-disco, along with new device support for the existing stm32f429 boards. - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus board. - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM wireless router. - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and the Technexion Pico i.MX7D single-board computers. - The BeagleBone Blue is added for OMAP, it's the latest variation of the popular Beaglebone Black single-board computer. - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are added, these are the latest variations of a seemingly endless supply of similar single-board computers. Other updates: - Linus Walleij improves support for the "Faraday" based SoC platforms from various SoC makers (Moxart, Aspeed, Gemini) - The ARM Mali GPU is now describe on Rockchips SoCs - Mediatek MT7623 is extended significantly, making it much more useful. - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom, Allwinner, Qualcomm, iMX - For Amlogic, the clock support is extended a lot on meson8b. - We now build the devicetree file for the Raspberry Pi 3 on 32-bit ARM, in addition to the existing ARM64 support, to help users wanting to run a 32-bit system on it" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits) ARM: dts: socfpga: set the i2c frequency ARM: dts: socfpga: Add second ethernet alias to VINING FPGA ARM: dts: socfpga: Drop LED node from VINING FPGA ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA ARM: dts: socfpga: Enable QSPI support on VINING FPGA ARM: dts: socfpga: Fix the ethernet clock phandle ARM: pxa: Use - instead of @ for DT OPP entries ARM: dts: owl-s500: Add SPS node ARM: dts: owl-s500: Set CPU enable-method dt-bindings: arm: cpus: Add S500 enable-method ARM: dts: Add Actions Semi S500 and LeMaker Guitar dt-bindings: arm: Document Actions Semi S900 dt-bindings: timer: Document Owl timer ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes dt-bindings: arm: Document Actions Semi S500 dt-bindings: Add vendor prefix for Actions Semi ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) ARM: dts: armada-385-linksys: fixup button node names ARM: dts: armada-385-linksys: group pins in pinctrl ...
2017-07-04Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: - Andres Färber adds initial support for the Actions Semi S500 (aka 'owl') platform, a close relative of the S900 platform he adds for arm64. - in mach-omap2, we remove more legacy code - Rockchips gains support for the RV1108 SoC designed for camera applications. - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70) - Minor updates for other platforms, including davinci, s3c64xx, prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: owl: smp: Drop bogus holding pen ARM: owl: Drop custom machine ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3 soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains MAINTAINERS: Update Actions Semi section with SPS ARM: owl: Implement CPU enable-method for S500 MAINTAINERS: Add Actions Semi Owl section ARM: Prepare Actions Semi S500 ARM: socfpga: Increase max number of GPIOs ARM: stm32: Introduce MACH_STM32F469 flag ARM: prima2: remove redundant select CPU_V7 ARM: davinci: fix const warnings ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON ARM: OMAP4: hwmod_data: add SHAM crypto accelerator ARM: OMAP4: hwmod data: add des ARM: OMAP4: hwmod data: add aes2 ARM: OMAP4: hwmod data: add aes1 ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe() ...
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...