summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)Author
2017-01-16Merge tag 'samsung-dt64-4.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.11: 1. Add bus frequency and voltage scalling on Exynos5433 TM2 device (along with necessary bus nodes and Platform Performance Monitoring Unit on Exynos5433). 2. Use macros for pinctrl settings on Exynos5433. This contains necessary header with bindings. 3. Minor cleanups in Exynos5433 DTSI and boards using it. 4. Create common DTSI betweem Exynos5433 TM2E and TM2E. 5. Add HDMI/TV to Exynos5433 TM2. * tag 'samsung-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Enable HDMI/TV path on Exynos5433-TM2 arm64: dts: exynos: Add HDMI node to Exynos5433 arm64: dts: exynos: Add DECON_TV node to Exynos5433 arm64: dts: exynos: Fix addresses in node names on Exynos5433 arm64: dts: exynos: Make TM2 and TM2E independent from each other arm64: dts: exynos: Fix wrong values for ldo23 and ldo25 on TM2/TM2E arm64: dts: exynos: Remove unsupported regulator-always-off property from TM2E arm64: dts: exynos: Comply to the samsung pinctrl naming convention in TM2 arm64: dts: exynos: Use macros for pinctrl configuration on Exynos5433 pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433 arm64: dts: exynos: Add support of bus frequency using VDD_INT on Exynos5433 TM2 arm64: dts: exynos: Add bus nodes using VDD_INT for Exynos5433 arm64: dts: exynos: Add PPMU node to Exynos5433 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16clk: samsung: Remove Exynos4415 driver (SoC not supported anymore)Krzysztof Kozlowski
Support for Exynos4415 is going away because there are no internal nor external users. Since commit 46dcf0ff0de3 ("ARM: dts: exynos: Remove exynos4415.dtsi"), the platform cannot be instantiated so remove also the drivers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-01-13clk: rockchip: add clock ids for memory controller parts on rk3066/rk3188Heiko Stuebner
Add clock ids for the upctl and publ controllers used for ddr control. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-13clk: rockchip: add rk3288 isp_in clock idsJacob Chen
Add clock-ids for the isp block of the rk3288. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-11soc: zte: Add header for PM domains specifiersBaoyou Xie
This patch adds header with values used for ZTE 2967 SoC's power domain driver. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-10clk: stm32f4: Update DT bindings documentationGabriel Fernandez
Creation of dt include file for specific stm32f4 clocks. These specific clocks are not derived from system clock (SYSCLOCK) We should use index 1 to use these clocks in DT. e.g. <&rcc 1 CLK_LSI> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org>
2017-01-09clk: mdm9615: Add EBI2 clockZoran Markovic
Add definition of EBI2 clock used by MDM9615 NAND controller. Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: linux-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> [sboyd@codeaurora.org: ebi2_clk halt bit is 24 not 23] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09Merge branch 'clk-hi3660' into clk-nextStephen Boyd
* clk-hi3660: clk: hisilicon: Add clock driver for hi3660 SoC dt-bindings: Document the hi3660 clock bindings
2017-01-09clk: hisilicon: Add clock driver for hi3660 SoCZhangfei Gao
Add clock drivers for hi3660 SoC, this driver controls the SoC registers to supply different clocks to different IPs in the SoC. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> [sboyd@codeaurora.org: Simplify probe with function pointer] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09clk: qcom: Add GCC_MSS_RESET supportAvaneesh Kumar Dwivedi
Add support to use reset control framework for resetting MSS with hexagon v56 1.5.0. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09Merge branches 'clk-qcom-rpm8974', 'clk-stm32f4', 'clk-ipq4019' and ↵Stephen Boyd
'clk-fixes' into clk-next * clk-qcom-rpm8974: clk: qcom: smd-rpmcc: Add msm8974 clocks * clk-stm32f4: clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board clk: stm32f4: Add SAI clocks clk: stm32f4: Add I2S clock clk: stm32f4: Add lcd-tft clock clk: stm32f4: Add post divisor for I2S & SAI PLLs clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards clk: stm32f4: Update DT bindings documentation * clk-ipq4019: clk: qcom: ipq4019: Add the cpu clock frequency change notifier clk: qcom: ipq4019: Add all the frequencies for apss cpu clk: qcom: ipq4019: correct sdcc frequency and parent name clk: qcom: ipq4019: Add the nodes for pcnoc clk: qcom: ipq4019: Add the apss cpu pll divider clock node clk: qcom: ipq4019: remove fixed clocks and add pll clocks * clk-fixes: clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method clk: renesas: mstp: Support 8-bit registers for r7s72100
2017-01-06ARM: dts: Fix omap3 off mode pull definesTony Lindgren
We need to also have OFFPULLUDENABLE bit set to use the off mode pull values. Otherwise the line is pulled down internally if no external pull exists. This is has some documentation at: http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration Note that the value is still glitchy during off mode transitions as documented in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of relying on the internal ones for off mode and even then anything pulled up will get driven down momentarily on off mode restore for GPIO banks other than bank1. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-06pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433Andi Shyti
Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with values used for configuration") has added a header file for defining the pinctrl values in order to avoid hardcoded settings in the Exynos DTS related files. Extend samsung.h to the Exynos5433 for drive strength values which are strictly related to the particular SoC and may defer from others. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-05dt-bindings: power: add RK3328 SoCs header for idle-requestElaine Zhang
According to a description from TRM, add all the idle request. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-05clk: rockchip: add dt-binding header for rk3328Elaine Zhang
Add the dt-bindings header for the rk3328, that gets shared between the clock controller and the clock references in the dts. Add softreset ID for rk3328. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-27dt-bindings: mfd: Remove TPS65217 interruptsMilo Kim
Interrupt numbers are from the datasheet, so no need to keep them in the ABI. Use the number in the DT file. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-21clk: stm32f4: Update DT bindings documentationGabriel Fernandez
Creation of dt include file for specific stm32f4 clocks. These specific clocks are not derived from system clock (SYSCLOCK) We should use index 1 to use these clocks in DT. e.g. <&rcc 1 CLK_LSI> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21clk: qcom: smd-rpmcc: Add msm8974 clocksBjorn Andersson
This adds all RPM based clocks for msm8974, except cxo and gfx3d_clk_src. Tested-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21clk: qcom: ipq4019: Add the nodes for pcnocAbhishek Sahu
The current ipq4019 clock driver does not have the node for PCNOC so this patch adds and registers the PCNOC clock nodes. This PCNOC clock is critical and should not be turned off so setting CRITICAL flag also. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21clk: qcom: ipq4019: Add the apss cpu pll divider clock nodeAbhishek Sahu
The current ipq4019 clock driver does not have support for all the frequency supported by APSS CPU. APSS CPU frequency is provided with APSS CPU PLL divider which divides down the VCO frequency. This divider is nonlinear and specific to IPQ4019 so the standard divider code cannot be used for this. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21clk: qcom: ipq4019: remove fixed clocks and add pll clocksAbhishek Sahu
The current ipq4019 clock driver registered the PLL clocks and dividers as fixed clock. These fixed clock needs to be removed from driver probe function and same need to be registered with clock framework. These PLL clocks should be programmed only once and the same are being programmed already by the boot loader so the set rate operation is not required for these clocks. Only the rate can be calculated by clock operations in clock driver file so this patch adds the same. The PLL takes the reference clock from XO and generates the intermediate VCO frequency. This VCO frequency will be divided down by different PLL internal dividers. Some of the PLL internal dividers are fixed while other are programmable. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-20dt: bindings: net: use boolean dt properties for eee broken modesjbrunet
The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-12-15Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
2016-12-14Merge tag 'sound-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No dramatic changes are found in this development cycle, but as usual, many commits are applied in a wide range of drivers. Most of big changes are in ASoC, where a few bits of framework work and quite a lot of cleanups and improvements to existing code have been done. The rest are usual stuff, a few HD-audio and USB-audio quirks and fixes, as well as the drop of kthread usages in the whole subsystem. Below are some highlights: ASoC: - support for stereo DAPM controls - some initial work on the of-graph sound card - regmap conversions of the remaining AC'97 drivers - a new version of the topology ABI; this should be backward compatible - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona, Intel skylake, atom-sst - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665 USB-audio: - yet another race fix at disconnection - tolerated packet size calculation for some Android devices - quirks for Axe-Fx II, QuickCam, TEAC 501/503 HD-audio: - improvement of Dell pin fixup mapping - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic Misc: - replace all kthread usages with simple works" * tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits) ALSA: hiface: Fix M2Tech hiFace driver sampling rate change ALSA: usb-audio: Eliminate noise at the start of DSD playback. ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path ASoC: topology: avoid uninitialized kcontrol_type ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks ALSA: usb-audio: add implicit fb quirk for Axe-Fx II ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define ASoC: zte: spdif and i2s drivers are not zx296702 specific ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting ASoC: rsnd: enable/disable ADG when suspend/resume timing ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params ALSA: cs46xx: add a new line ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture ASoC: nau8825: disable sinc filter for high THD of ADC ALSA: usb-audio: more tolerant packetsize ALSA: usb-audio: avoid setting of sample rate multiple times on bus ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq ...
2016-12-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
2016-12-13Merge tag 'pinctrl-v4.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "Bulk pin control changes for the v4.10 kernel cycle: No core changes this time. Mainly gradual improvement and feature growth in the drivers. New drivers: - New driver for TI DA850/OMAP-L138/AM18XX pinconf - The SX150x was moved over from the GPIO subsystem and reimagined as a pin control driver with GPIO support in a joint effort by three independent users of this hardware. The result was amazingly good! - New subdriver for the Oxnas OX820 Improvements: - The sunxi driver now supports the generic pin control bindings rather than the sunxi-specific. Add debouncing support to the driver. - Simplifications in pinctrl-single adding a generic parser. - Two downstream fixes and move the Raspberry Pi BCM2835 over to use the generic GPIOLIB_IRQCHIP" * tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits) pinctrl: sx150x: use new nested IRQ infrastructure pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505 pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced' pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147] pinctrl: mt8173: set GPIO16 to usb iddig mode pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf devicetree: bindings: pinctrl: Add binding for ti,da850-pupd Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition pinctrl: intel: set default handler to be handle_bad_irq() pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507 pinctrl: sx150x: sort chips by part number pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508) pinctrl: imx: fix imx_pinctrl_desc initialization pinctrl: sx150x: support setting multiple pins at once pinctrl: sx150x: various spelling fixes and some white-space cleanup pinctrl: mediatek: use builtin_platform_driver pinctrl: stm32: use builtin_platform_driver pinctrl: sunxi: Testing the wrong variable pinctrl: nomadik: split up and comments MC0 pins ...
2016-12-06Merge tag 'v4.10-rockchip-clk2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next Pull rockchip clk driver updates from Heiko Stuebner: A new clock controller for the rk1108 soc (single-core Cortex-A7+DSP), a fix making sure the cpuclk rate is actually valid, before trying to set it and a copy-paste fix for the rk3399's testclk. * tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add clock controller for rk1108 dt-bindings: add documentation for rk1108 cru clk: rockchip: add dt-binding header for rk1108 clk: rockchip: fix copy-paste error in rk3399 testclk clk: rockchip: validity should be checked prior to cpu clock rate change
2016-11-30Merge tag 'v4.10-rockchip-dts32-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.10" from Heiko Stübner: A bit of attention for the rk3066, fixed tsadc reset node as well as enabling the dma for uart and mmc controllers. And one new soc, the rk1108 combining a single-core Cortex-A7 with a separate DSP core. * tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the sdmmc pinctrl for rk1108 ARM: dts: rockchip: add rockchip RK1108 Evaluation board ARM: dts: rockchip: add basic support for RK1108 SOC clk: rockchip: add dt-binding header for rk1108 dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description ARM: dts: rockchip: enable dma for uart and mmc on rk3066a ARM: dts: rockchip: fix TSADC reset node for rk3066a
2016-11-30Merge tag 'arm-soc/for-4.10/devicetree' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.10" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10, please pull the following: - Rafal adds support for the Netgear R8500 routers, adds basic support for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex A7). He also enables the UART on the Netgear R8000 and restructures the include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes which enables USB 3.0 on BCM5301X devices that support it. Finally he adds support for the TP-LINK Archer C9 V1 router. - Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates the bcm958625k reference board to have it enabled - Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using a BCM47094) - Scott fixes the pinctrl names in the Cygnus DTS files - Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds the node for the OTP controller found on Cygnus SoCs - Dhananjay enables the GPIO B controller on Norstarh Plus SoCs - Eric defines standard pinctrl groups in the BCM2835 GPIO node - Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes to use their appropriate pinctrl functions - Linus adds names for the Raspberry Pi GPIO lines based on the datasheet - Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block - Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally adds names for the Raspberry Zero GPIO lines * tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux: (29 commits) ARM: bcm2835: Add names for the RPi Zero GPIO lines ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines ARM: dts: enable GPIO-b for Broadcom NSP ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1 ARM: dts: Add node for Broadcom OTP controller driver ARM: dts: Enable interrupt support for cygnus crmu gpio driver ARM: dts: Enable Broadcom iProc mailbox controller ARM: bcm2835: Add names for the Raspberry Pi GPIO lines ARM: bcm2835: dts: add thermal node to device-tree of bcm283x dt: bindings: add thermal device driver for bcm2835 ARM: dts: bcm283x: fix typo in mailbox address DT: binding: bcm2835-mbox: fix address typo in example ARM: dts: cygnus: fix naming of pinctrl node ARM: BCM53573: Specify PMU and its ILP clock in the DT ARM: BCM5301X: Add DT for Luxul XWR-3100 ARM: BCM5301X: Add DT for Luxul XAP-1510 ARM: BCM5301X: Specify USB 3.0 PHY in DT ARM: BCM5301X: Enable UART on Netgear R8000 ARM: BCM5301X: Add separated DTS include file for BCM47094 ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes ...
2016-11-30Merge tag 'renesas-dt2-for-v4.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.10" from Simon Horman: Enhancements: * Add device nodes for PRR * Add r8a7745 SoC and sk-rzg1e board * Add r8a7743 SoC and sk-rzg1m board * Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards Corrections: * Use SYSC "always-on" PM Domain for sound on r8a7794 SoC * Correct hsusb parent clock on r8a7794 SoC * Correct PFC names for DU on alt board * tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ARM: dts: r8a7745: add IRQC support ARM: dts: r8a7745: add Ether support ARM: dts: r8a7745: add [H]SCIF{|A|B} support ARM: dts: r8a7745: add SYS-DMAC support ARM: dts: r8a7745: initial SoC device tree ARM: dts: sk-rzg1m: add Ether support ARM: dts: sk-rzg1m: initial device tree ARM: dts: r8a7743: add IRQC support ARM: dts: r8a7743: add Ether support ARM: dts: r8a7743: add [H]SCIF{A|B} support ARM: dts: r8a7743: add SYS-DMAC support ...
2016-11-30Merge tag 'rzg-clock-defs-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into next/dt Pull "Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions" from Geert Uytterhoeven: Shared by clock drivers, and DTS files. * tag 'rzg-clock-defs-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: Add r8a7745 CPG Core Clock Definitions clk: renesas: Add r8a7743 CPG Core Clock Definitions
2016-11-30Merge tag 'renesas-r8a7745-sysc-for-v4.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman: * Add support for the r8a7745 SoC to rcar-sysc * tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: add R8A7745 support ARM: shmobile: r8a7745: add power domain index macros Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-29dt-bindings: net: add EEE capability constantsjbrunet
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-23Merge tag 'rzg-clock-defs-tag1'; commit '538321bd9718'; commit ↵Simon Horman
'97ca8402997c' into dt-for-v4.10 Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions Shared by clock drivers, and DTS files.
2016-11-23ARM: shmobile: r8a7745: add power domain index macrosSergei Shtylyov
Add macros usable by the device tree sources to reference R8A7745 SYSC power domains by index. Based on the original (and large) patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-18Merge tag 'tegra-for-4.10-firmware' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers firmware: Add Tegra IVC and BPMP support IVC is an inter-processor communication protocol that uses shared memory to exchange data between processors. The BPMP driver makes use of this to communicate with the Boot and Power Management Processor (BPMP) and uses an additional hardware synchronization primitive from the HSP block to signal availability of new data (doorbell). Firmware running on the BPMP implements a number of services such as the control of clocks and resets within the system, or the ability to ungate or gate power partitions. * tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'tegra-for-4.10-mailbox' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers mailbox: Add Tegra HSP driver This contains the device tree bindings and a driver for the Tegra HSP, a hardware block that provides hardware synchronization primitives and is the foundation for inter-processor communication between CPU and BPMP. * tag 'tegra-for-4.10-mailbox' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver dt-bindings: mailbox: Add Tegra HSP binding soc/tegra: Add Tegra186 support Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'omap-for-v4.10/dt-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.10 merge window: - A series of patches to configure tps65217 PMIC interrupts for power button, charger and usb and use them on am335x - Configure EEPROM, LEDs and USR1 button for omap5 boards - Add tscadc DMA properites for am33xx and am4372 - Configure baltos-ir5221 both musb channels to host mode - Configure internal and external RTC clocks for am335x boards - Don't reset gpio3 block on baltos - Remove pinmux for dra72-evm for erratum i869, fix the regulators and seprate out tps65917 support - Add dra718-evm support - Add minimal droid 4 xt894 support * tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits) ARM: dts: Add minimal support for motorola droid 4 xt894 ARM: dts: Add support for dra718-evm ARM: dts: dra72: Add separate dtsi for tps65917 ARM: dts: dra72-evm: Fix modelling of regulators ARM: dts: dra72-evm: Remove pinmux configurations for erratum i869 ARM: dts: am335x-baltos: don't reset gpio3 block ARM: dts: AM335X-evmsk: Add the internal and external clock nodes for rtc ARM: dts: AM335X-evm: Add the internal and external clock nodes for rtc ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtc ARM: dts: am335x-baltos-ir5221: use both musb channels in host mode ARM: dts: am4372: add DMA properties for tscadc ARM: dts: am33xx: add DMA properties for tscadc ARM: dts: omap5 uevm: add USR1 button ARM: dts: omap5 uevm: add LEDs ARM: dts: omap5 uevm: add EEPROM ARM: dts: am335x: Add the power button interrupt ARM: dts: am335x: Add the charger interrupt dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts ARM: dts: am335x: Support the PMIC interrupt ARM: dts: tps65217: Add the power button device ... Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18Merge tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
next/drivers Reset controller changes for v4.10 - remove obsolete STiH41[56] platform support - add Oxford Semiconductor OX820 support - add reset index include files for OX810SE and OX820 - make drivers with boolean Kconfig options explicitly non-modular - allow shared pulsed resets via reset_control_reset, which in this case means that the reset must have been triggered once, but possibly earlier, after the function returns, and is never triggered again for the lifetime of the reset control * tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux: reset: allow using reset_control_reset with shared reset reset: lpc18xx: make it explicitly non-modular reset: zynq: make it explicitly non-modular reset: sunxi: make it explicitly non-modular reset: socfpga: make it explicitly non-modular reset: berlin: make it explicitly non-modular dt-bindings: reset: oxnas: Update for OX820 dt-bindings: reset: oxnas: Add include file with reset indexes reset: oxnas: Add OX820 support reset: sti: softreset: Remove obsolete platforms from dt binding doc. reset: sti: Remove STiH415/6 reset support Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18dt-bindings: Add power domains to Tegra BPMP firmwareStephen Warren
The Tegra186 BPMP is also a provider of power domains. Enhance the device tree binding to describe this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18dt-bindings: firmware: Add bindings for Tegra BPMPJoseph Lo
The Boot and Power Management Processor (BPMP) is a co-processor found in Tegra SoCs. It is designed to handle the early stages of the boot process as well as to offload power management tasks (such as clocks, resets, powergates, ...). The binding document defines the resources that are used by the BPMP firmware, which implements the interprocessor communication (IPC) between the CPU and the BPMP. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-17Merge tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson
- Add bindings for mtk-scpsys for mt2701 - Add clocks for auxadc on mt8173-evb - Add nodes needed by clock controller for mt2701 - Use clocks from the clock controller for the uart of mt2701 * tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek: arm: dts: mt2701: Use real clock for UARTs arm: dts: mt2701: Add clock controller device nodes arm64: dts: mt8173: Fix auxadc node soc: mediatek: Add MT2701 power dt-bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'qcom-drivers-for-4.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers Qualcomm ARM Based Driver Updates for v4.10 * Fixup QCOM SCM to use devm_reset_controller_register * Add QCOM pinctrl to Qualcomm MAINTAINERS entry * Add PM8994 regulator definitions * Add stub for WCNSS_CTRL API * tag 'qcom-drivers-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: firmware: qcom: scm: Use devm_reset_controller_register() MAINTAINERS: add drivers/pinctrl/qcom to ARM/QUALCOMM SUPPORT pinctrl: pm8994: add pad voltage regulator defines soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'v4.10-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt 32bit devicetree changes for Rockchip including removal of skeleton.dtsi inclusion, missing unit names for memory nodes, various frequency optimizations allowing for better performance on rk3066, the usage of pin constants to bridge between the two numbering schemes used (gpio controllers using 0-31 and pins being labeled A0-A7,..., D0-D7) and UHS/HS modes for the mmc controllers on the popmetal board. Two new boards, the PX3-based evaluation board, with the PX3 being an industrial variant of the rk3188 soc and the Rikomagic MK808 board based around the rk3066 are also added. * tag 'v4.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits) ARM: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max" ARM: dts: rockchip: Set sdmmc frequency at boot time for rk3066a ARM: dts: rockchip: use pin constants to describe gpios on Popmetal-RK3288 include: dt-bindings: Add GPIO pin index definition for rockchip pinctrl ARM: dts: rockchip: Add rk3066 MK808 board devicetree: Add vendor prefix for Rikomagic ARM: dts: rockchip: initialize rk3066 PLL clock rate clk: rockchip: Add binding ids for cpu and peri clocks on rk3066 ARM: dts: rockchip: enable HS200/DDR52 mode for emmc on rk3288-popmetal ARM: dts: rockchip: Support UHS mode for SD card on PopMetal-RK3288 board ARM: dts: rockchip: remove always-on and boot-on from vcc_sd for px3-evb ARM: dts: rockchip: update compatible strings for Rockchip efuse ARM: dts: rockchip: add rockchip PX3 Evaluation board ARM: dts: rockchip: Add missing unit name to memory nodes in rk3xxx boards ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards ARM: dts: rockchip: Add missing unit name to memory nodes in rk322x boards ARM: dts: rockchip: Add missing unit name to memory nodes in rk3036 boards ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk3xxx.dtsi ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk3288.dtsi ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk322x.dtsi ... Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'sti-dt-for-4.10-round2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt STi dts update: Change sound card name for B2120 Enable sound card for B2260 Remove stih415-clks.h Identify critical clocks for STiH407 Fix typo in stih407-pinctrl.dtsi * tag 'sti-dt-for-4.10-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiHxxx-b2120: change sound card name ARM: dts: STiH410-B2260: enable sound card ARM: dts: remove stih415-clks.h ARM: dts: stih407-clocks: Identify critical clocks ARM: dts: STiH407: DT fix s/interrupts-names/interrupt-names/ Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17Merge tag 'clk-renesas-for-v4.10-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull Renesas clk driver updates from Geerty Uytterhoeven: - Add R-Car RST driver for obtaining mode pin state, and move the related functionality from platform code to DT, - Add r8a7743 and r8a7745 CPG Core Clock Definitions. The commits here are intermingled with arm-soc material because of the hard dependency we're breaking between mach code and driver code. We're replacing that with a driver dependency between the soc driver and the clk driver. * tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (25 commits) clk: renesas: Add r8a7745 CPG Core Clock Definitions clk: renesas: Add r8a7743 CPG Core Clock Definitions clk: renesas: rcar-gen2: Remove obsolete rcar_gen2_clocks_init() clk: renesas: r8a7779: Remove obsolete r8a7779_clocks_init() clk: renesas: r8a7778: Remove obsolete r8a7778_clocks_init() ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driver ARM: shmobile: r8a7779: Stop passing mode pins state to clock driver ARM: shmobile: r8a7778: Stop passing mode pins state to clock driver clk: renesas: rcar-gen3-cpg: Remove obsolete rcar_gen3_read_mode_pins() clk: renesas: r8a7796: Obtain mode pin values from R-Car RST driver clk: renesas: r8a7795: Obtain mode pin values from R-Car RST driver clk: renesas: rcar-gen2: Obtain mode pin values using RST driver clk: renesas: r8a7779: Obtain mode pin values from R-Car RST driver clk: renesas: r8a7778: Obtain mode pin values using R-Car RST driver arm64: renesas: r8a7796 dtsi: Add device node for RST module arm64: renesas: r8a7795 dtsi: Add device node for RST module ARM: dts: r8a7794: Add device node for RST module ARM: dts: r8a7793: Add device node for RST module ARM: dts: r8a7792: Add device node for RST module ARM: dts: r8a7791: Add device node for RST module ...
2016-11-16Merge tag 'sunxi-clk-for-4.10' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock changes from Maxime Ripard: The usual patches from us, but most notably the introduction of the A64 clocks unit. * tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks clk: sunxi-ng: sun8i-a23: Set CLK_SET_RATE_PARENT for audio module clocks clk: sunxi-ng: Add A64 clocks clk: sunxi-ng: Implement minimum for multipliers clk: sunxi-ng: Add minimums for all the relevant structures and clocks clk: sunxi-ng: Finish to convert to structures for arguments clk: sunxi-ng: Remove the use of rational computations clk: sunxi-ng: Rename the internal structures clk: sunxi: mod0: improve function-level documentation
2016-11-16Merge tag 'imx-clk-4.10' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next Pull i.MX clock updates from Shawn Guo: - A patch series to fix the long standing issue with glitchy parent mux of ldb_di_clk, which can hang up LVDS display when ipu_di_clk is sourced from ldb_di_clk. - A patch to add imx6ull clock support on top of imx6ul clock driver. * tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx: clk-imx6ul: add clk support for imx6ull clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
2016-11-16Merge branch 'v4.10-shared/clkids' into v4.10-armsoc/dts32Heiko Stuebner