| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
|
|
Disable parsing of the HMAT for debug, to workaround broken platform
instances, or cases where it is otherwise not wanted.
[rdunlap@infradead.org: fix build when CONFIG_ACPI is not set]
Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/159643095540.4062302.732962081968036212.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5.
The device-dax facility allows an address range to be directly mapped
through a chardev, or optionally hotplugged to the core kernel page
allocator as System-RAM. It is the mechanism for converting persistent
memory (pmem) to be used as another volatile memory pool i.e. the current
Memory Tiering hot topic on linux-mm.
In the case of pmem the nvdimm-namespace-label mechanism can sub-divide
it, but that labeling mechanism is not available / applicable to
soft-reserved ("EFI specific purpose") memory [3]. This series provides a
sysfs-mechanism for the daxctl utility to enable provisioning of
volatile-soft-reserved memory ranges.
The motivations for this facility are:
1/ Allow performance differentiated memory ranges to be split between
kernel-managed and directly-accessed use cases.
2/ Allow physical memory to be provisioned along performance relevant
address boundaries. For example, divide a memory-side cache [4] along
cache-color boundaries.
3/ Parcel out soft-reserved memory to VMs using device-dax as a security
/ permissions boundary [5]. Specifically I have seen people (ab)using
memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the
device-dax interface on custom address ranges. A follow-on for the VM
use case is to teach device-dax to dynamically allocate 'struct page' at
runtime to reduce the duplication of 'struct page' space in both the
guest and the host kernel for the same physical pages.
[2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com
[3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com
[4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
[5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com
This patch (of 23):
In preparation for adding a new numa= option clean up the existing ones to
avoid ifdefs in numa_setup(), and provide feedback when the option is
numa=fake= option is invalid due to kernel config. The same does not need
to be done for numa=noacpi, since the capability is already hard disabled
at compile-time.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/160106109960.30709.7379926726669669398.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094279.4062302.17779410714418721328.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/159643094925.4062302.14979872973043772305.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
|
|
* acpi-video:
ACPI: video: use ACPI backlight for HP 635 Notebook
* acpi-battery:
ACPI: battery: include linux/power_supply.h
* acpi-config:
ACPI: configfs: Add missing config_item_put() to fix refcount leak
* acpi-scan:
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
|
|
|
|
ACPICA commit 70add34a9a4729b5496d0695ad14d6a1dc435879
Link: https://github.com/acpica/acpica/commit/70add34a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This allows iASL to generate errors by passing exceptions that may be
encountered during string-to-integer conversions. The exceptions
point out invalid hex, decimal, and octal integers.
ACPICA commit e98b8c0a3d96fdabb167c0ef18a809b32ade3228
Link: https://github.com/acpica/acpica/commit/e98b8c0a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Added the following UUID's
Memory Device
Generic Buttons Device
NVDIMM Root Device
Control Method Battery
Device Graphs for _DSD method
Hierarchical Data Extension
ARM core_sight Graph UUID
This commit squashes the following ACPICA commits:
93e9aa864a7c5e10db876a9af3f2086e50cc6cf5
759aaf73942af4a1a0d13715ce5e6b054af351fa
24751ce4cf3089a7c1709e4986bc82dfb5cca7bc
Link: https://github.com/acpica/acpica/commit/93e9aa86
Link: https://github.com/acpica/acpica/commit/759aaf73
Link: https://github.com/acpica/acpica/commit/24751ce4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 6648a6ac8410813bcfedb5c8345259dd155ea851
Fix spelling issues found using the codespell checker
Link: https://github.com/acpica/acpica/commit/6648a6ac
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 9ed2c006444d1def55bc6f08164ed5d9e809c856
Link: https://github.com/acpica/acpica/commit/9ed2c006
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 0def627be286620c64a5d4d60ce2373f119169a9
Add 64 bit risc-v architecture. Useful for acpica tools and
incorporating ACPICA into the Firmware Test Suite.
Link: https://github.com/acpica/acpica/commit/0def627b
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 01feba590cd6 ("ACPI: Do not create new NUMA domains from
ACPI static tables that are not SRAT"):
$ scripts/config --file arch/x86/configs/x86_64_defconfig -d NUMA -e ACPI_NFIT
$ make -skj"$(nproc)" distclean defconfig drivers/acpi/nfit/
drivers/acpi/nfit/core.c: In function ‘acpi_nfit_register_region’:
drivers/acpi/nfit/core.c:3010:27: error: implicit declaration of
function ‘pxm_to_node’; did you mean ‘xa_to_node’?
[-Werror=implicit-function-declaration]
3010 | ndr_desc->target_node = pxm_to_node(spa->proximity_domain);
| ^~~~~~~~~~~
| xa_to_node
cc1: some warnings being treated as errors
...
Add a stub function like acpi_map_pxm_to_node() had so that the build
continues to work.
Fixes: 01feba590cd6 ("ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi/battery.h uses 'struct power_supply *', but fails to
include/create any declaration of the type. Include linux/
power_supply.h to fix that.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CPER records describing a firmware-first error are identified by GUID.
The ghes driver currently logs, but ignores any unknown CPER records.
This prevents describing errors that can't be represented by a standard
entry, that would otherwise allow a driver to recover from an error.
The UEFI spec calls these 'Non-standard Section Body' (N.2.3 of
version 2.8).
Add a notifier chain for these non-standard/vendor-records. Callers
must identify their type of records by GUID.
Record data is copied to memory from the ghes_estatus_pool to allow
us to keep it until after the notifier has run.
Co-developed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200903123456.1823-2-shiju.jose@huawei.com
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
|
|
Define ACPI_GPE_USE_LOGICAL_ADDRESSES in aclinux.h and modify
acpi_os_initialize() to store the logical addresses of the FADT GPE
blocks 0 and 1 in acpi_gbl_xgpe0_block_logical_address and
acpi_gbl_xgpe1_block_logical_address, respectively, so as to allow
ACPICA to use them for accessing GPE registers in system memory,
instead of using their physical addresses and looking up the
corresponding logical addresses on every access attempt, which is
inefficient.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Modify acpi_os_map_generic_address() to return the pointer returned
by acpi_os_map_iomem() which represents the logical address
corresponding to the struct acpi_generic_address argument passed to
it or NULL if that address cannot be obtained (for example, the
argument does not represent an address in system memory or it could
not be mapped by the OS).
Among other things, that will allow the ACPI OS layer to pass the
logical addresses of the FADT GPE blocks 0 and 1 to ACPICA going
forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These eliminate significant AML processing overhead related to using
operation regions in system memory, update the ACPICA code in the
kernel to upstream revision 20200717 (including a fix to prevent
operation region reference counts from overflowing in some cases),
remove the last bits of the (long deprecated) ACPI procfs interface
and do some assorted cleanups.
Specifics:
- Eliminate significant AML processing overhead related to using
operation regions in system memory by reworking the management of
memory mappings in the ACPI code to defer unmap operations (to do
them outside of the ACPICA locks, among other things) and making
the memory operation reagion handler avoid releasing memory
mappings created by it too early (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200717:
* Prevent operation region reference counts from overflowing in
some cases (Erik Kaneda).
* Replace one-element array with flexible-array (Gustavo A. R.
Silva).
- Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
- Drop last bits of the ACPI procfs interface (Thomas Renninger).
- Drop some redundant checks from the code parsing ACPI tables
related to NUMA (Hanjun Guo).
- Avoid redundant object evaluation in the ACPI device properties
handling code (Heikki Krogerus).
- Avoid unecessary memory overhead related to storing the signatures
of the ACPI tables recognized by the kernel (Ard Biesheuvel).
- Add missing newline characters when printing module parameter
values in some places (Xiongfeng Wang).
- Update the link to the ACPI specifications in some places (Tiezhu
Yang).
- Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
Silva).
- Drop redundant variable initialization from the APEI code (Colin
Ian King).
- Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
- Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
Klimov)"
* tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
ACPI: APEI: remove redundant assignment to variable rc
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPICA: Update version to 20200717
ACPICA: Do not increment operation_region reference counts for field units
ACPICA: Replace one-element array with flexible-array
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
ACPI: Use fallthrough pseudo-keyword
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
ACPI: tables: avoid relocations for table signature array
ACPI: PAD: Eliminate usage of uninitialized_var() macro
ACPI: sysfs: add newlines when printing module parameters
ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
* acpi-mm:
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
* acpi-tables:
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPI: tables: avoid relocations for table signature array
* acpi-apei:
ACPI: APEI: remove redundant assignment to variable rc
* acpi-misc:
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: Use fallthrough pseudo-keyword
|
|
Some HW devices are created as child devices of proprietary busses,
that have a bus specific policy defining how the child devices
wires representing the devices ID are translated into IOMMU and
IRQ controllers device IDs.
Current IORT code provides translations for:
- PCI devices, where the device ID is well identified at bus level
as the requester ID (RID)
- Platform devices that are endpoint devices where the device ID is
retrieved from the ACPI object IORT mappings (Named components single
mappings). A platform device is represented in IORT as a named
component node
For devices that are child devices of proprietary busses the IORT
firmware represents the bus node as a named component node in IORT
and it is up to that named component node to define in/out bus
specific ID translations for the bus child devices that are
allocated and created in a bus specific manner.
In order to make IORT ID translations available for proprietary
bus child devices, the current ACPI (and IORT) code must be
augmented to provide an additional ID parameter to acpi_dma_configure()
representing the child devices input ID. This ID is bus specific
and it is retrieved in bus specific code.
By adding an ID parameter to acpi_dma_configure(), the IORT
code can map the child device ID to an IOMMU stream ID through
the IORT named component representing the bus in/out ID mappings.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ACPICA commit c1adb9a2a775df7a85df0103342ebf090e1b2016
Version 20200717.
Link: https://github.com/acpica/acpica/commit/c1adb9a2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 7ba2f3d91a32f104765961fda0ed78b884ae193d
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure,
which will help us prevent some kind of undefined behavior bugs from
being inadvertently introduced[3] to the linux codebase from now on.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://github.com/acpica/acpica/commit/7ba2f3d9
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPICA's strategy with respect to the handling of memory mappings
associated with memory operation regions is to avoid mapping the
entire region at once which may be problematic at least in principle
(for example, it may lead to conflicts with overlapping mappings
having different attributes created by drivers). It may also be
wasteful, because memory opregions on some systems take up vast
chunks of address space while the fields in those regions actually
accessed by AML are sparsely distributed.
For this reason, a one-page "window" is mapped for a given opregion
on the first memory access through it and if that "window" does not
cover an address range accessed through that opregion subsequently,
it is unmapped and a new "window" is mapped to replace it. Next,
if the new "window" is not sufficient to acess memory through the
opregion in question in the future, it will be replaced with yet
another "window" and so on. That may lead to a suboptimal sequence
of memory mapping and unmapping operations, for example if two fields
in one opregion separated from each other by a sufficiently wide
chunk of unused address space are accessed in an alternating pattern.
The situation may still be suboptimal if the deferred unmapping
introduced previously is supported by the OS layer. For instance,
the alternating memory access pattern mentioned above may produce
a relatively long list of mappings to release with substantial
duplication among the entries in it, which could be avoided if
acpi_ex_system_memory_space_handler() did not release the mapping
used by it previously as soon as the current access was not covered
by it.
In order to improve that, modify acpi_ex_system_memory_space_handler()
to preserve all of the memory mappings created by it until the memory
regions associated with them go away.
Accordingly, update acpi_ev_system_memory_region_setup() to unmap all
memory associated with memory opregions that go away.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiang Li <xiang.z.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Recent extensions of the TPM2 ACPI table added 3 more fields
including 12 bytes of start method specific parameters and Log Area
Minimum Length (u32) and Log Area Start Address (u64). So, we define
a new structure acpi_tpm2_phy that holds these optional new fields.
The new fields allow non-UEFI systems to access the TPM2's log.
The specification that has the new fields is the following:
TCG ACPI Specification
Family "1.2" and "2.0"
Version 1.2, Revision 8
https://trustedcomputinggroup.org/wp-content/uploads/TCG_ACPIGeneralSpecification_v1.20_r8.pdf
Cc: linux-acpi@vger.kernel.org
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
* acpica:
ACPICA: Update version to 20200528
ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism
ACPICA: acpidump: Removed dead code from oslinuxtbl.c
|
|
ACPICA commit 30ceafb55b59724f73ae6f2b35523417c4e569ea
Version 20200528.
Link: https://github.com/acpica/acpica/commit/30ceafb5
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 2c2eefa827bd37297f5f9ca4b263fcba829aaf3f
Link: https://github.com/acpica/acpica/commit/2c2eefa8
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* acpi-apei:
arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
ACPI: APEI: Kick the memory_failure() queue for synchronous errors
mm/memory-failure: Add memory_failure_queue_kick()
* acpi-pmic:
ACPI / PMIC: Add i2c address for thermal control
* acpi-video:
ACPI: video: Use native backlight on Acer TravelMate 5735Z
* acpi-dptf:
ACPI: DPTF: Add battery participant driver
ACPI: DPTF: Additional sysfs attributes for power participant driver
|
|
'acpi-pci'
* acpi-processor:
ACPI: processor: idle: Allow probing on platforms with one ACPI C-state
* acpi-cppc:
ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
ACPI: CPPC: Make some symbols static
* acpi-dbg:
ACPI: debug: Make two functions static
* acpi-misc:
ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
ACPI: GED: add support for _Exx / _Lxx handler methods
ACPI: Delete unused proc filename macros
* acpi-pci:
ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
ACPI: utils: Add acpi_evaluate_reg() helper
|
|
memory_failure() offlines or repairs pages of memory that have been
discovered to be corrupt. These may be detected by an external
component, (e.g. the memory controller), and notified via an IRQ.
In this case the work is queued as not all of memory_failure()s work
can happen in IRQ context.
If the error was detected as a result of user-space accessing a
corrupt memory location the CPU may take an abort instead. On arm64
this is a 'synchronous external abort', and on a firmware first
system it is replayed using NOTIFY_SEA.
This notification has NMI like properties, (it can interrupt
IRQ-masked code), so the memory_failure() work is queued. If we
return to user-space before the queued memory_failure() work is
processed, we will take the fault again. This loop may cause platform
firmware to exceed some threshold and reboot when Linux could have
recovered from this error.
For NMIlike notifications keep track of whether memory_failure() work
was queued, and make task_work pending to flush out the queue.
To save memory allocations, the task_work is allocated as part of
the ghes_estatus_node, and free()ing it back to the pool is deferred.
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Tyler Baicar <baicar@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With a recent fix to the pinctrl-cherryview driver we now have
2 drivers open-coding the parameter building / passing for calling
_REG on an ACPI handle.
Add a helper for this, so that these 2 drivers can be converted to this
helper.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit c00a5cd99fa3fe6cd053a2a1a557e54b4fea26f7
Version 20200430.
Link: https://github.com/acpica/acpica/commit/c00a5cd9
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
|
|
* acpica:
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
|
|
Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():
"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.
It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.
Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."
WARNING: possible circular locking dependency detected
------------------------------------------------------
cpuhp/1/15 is trying to acquire lock:
ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630
but task is already holding lock:
ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x3e/0xc0
irq_calc_affinity_vectors+0x5f/0x91
__pci_enable_msix_range+0x10f/0x9a0
pci_alloc_irq_vectors_affinity+0x13e/0x1f0
pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
pqi_ctrl_init+0x72f/0x1618 [smartpqi]
pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
local_pci_probe+0x7a/0xc0
work_for_cpu_fn+0x2e/0x50
process_one_work+0x57e/0xb90
worker_thread+0x363/0x5b0
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
-> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
other info that might help us debug this:
Chain exists of:
(work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(cpuidle_lock);
lock(cpuhp_state-up);
lock(cpuidle_lock);
lock((work_completion)(&wfc.work));
*** DEADLOCK ***
3 locks held by cpuhp/1/15:
#0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
#2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20
Call Trace:
dump_stack+0xa0/0xea
print_circular_bug.cold.52+0x147/0x14c
check_noncircular+0x295/0x2d0
__lock_acquire+0x2244/0x32a0
lock_acquire+0x1a2/0x680
__flush_work+0x4e6/0x630
work_on_cpu+0x114/0x160
acpi_processor_ffh_cstate_probe+0x129/0x250
acpi_processor_evaluate_cst+0x4c8/0x580
acpi_processor_get_power_info+0x86/0x740
acpi_processor_hotplug+0xc3/0x140
acpi_soft_cpu_online+0x102/0x1d0
cpuhp_invoke_callback+0x197/0x1120
cpuhp_thread_fun+0x252/0x2f0
smpboot_thread_fn+0x255/0x440
kthread+0x1f4/0x220
ret_from_fork+0x27/0x50
Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal
Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some dead
code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu)"
* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPICA: Update version to 20200214
ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
ACPI: EC: Consolidate event handler installation code
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
acpi/x86: add a kernel parameter to disable ACPI BGRT
x86/acpi: make "asmlinkage" part first thing in the function definition
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
ACPI: video: remove redundant assignments to variable result
ACPI: OSL: Add missing __acquires/__releases annotations
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
ACPI: EC: Simplify acpi_ec_add()
ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
ACPI: EC: Avoid passing redundant argument to functions
ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
...
|
|
'acpi-misc'
* acpi-button:
ACPI: Add new tiny-power-button driver to directly signal init
ACPI: button: move HIDs to acpi/button.h
* acpi-battery:
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
* acpi-osl:
ACPI: OSL: Add missing __acquires/__releases annotations
* acpi-video:
ACPI: video: remove redundant assignments to variable result
* acpi-misc:
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
|
|
* acpica:
ACPICA: Update version to 20200214
ACPICA: Fix a couple of typos
ACPICA: use acpi_size instead of u32 for prefix_path_length
ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32
ACPICA: cast the result of the pointer difference to u32
ACPICA: Table Manager: Update comments in a function header
ACPICA: Enable sleep button on ACPI legacy wake
ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events.
ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree
ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
|
|
ACPICA commit 994fe943d93fe18eaaed1b6cd725023399f8a5c6
Version 20200326.
Link: https://github.com/acpica/acpica/commit/994fe943
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd
NHLT (Non-HDAudio Link Table) provides configuration of audio
endpoints for Intel SST (Smart Sound Technology) DSP products.
Similarly to other ACPI tables, data provided by BIOS may not
describe it correctly, thus overriding is required.
ACPI override mechanism checks for unknown signature before
proceeding. Update known signatures array to support NHLT.
Link: https://github.com/acpica/acpica/commit/422166b6
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 764d18c5a83949ff3b0dbda6055cee1929b9caa2
The table signature WSMT stands for "Windows SMM Mitigations Table".
It is not "Windows SMM Migrations Table".
Link: https://github.com/acpica/acpica/commit/764d18c5
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 87a1ab2b2a63e28776261c48bdbae345f790d05d
According to AMD IOMMU Specification Revision 3.05 the reserved field
should be IOMMU Feature Reporting. Change the name of the field to the
correct one.
Link: https://github.com/acpica/acpica/commit/87a1ab2b
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 6ddc19419896e4149ced1b5f35f0dc12516c0399
The AMD IVRS table parsing supported only IVHD type 10h structures.
Parsing an IVHD type 11h caused the iasl to report unknown subtable type.
Add necessary structure definition for IVHD type 11h and apply correct
parsing method based on subtable type.
Link: https://github.com/acpica/acpica/commit/6ddc1941
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit f3504c591c8766c70402dcc786391ff6748b515a
Link: https://github.com/acpica/acpica/commit/f3504c59
Reported-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit ac0c1b8a43a317702bb11e11fd5067a1c59e3002
Version 20200214
Link: https://github.com/acpica/acpica/commit/ac0c1b8a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The check carried out by acpi_any_gpe_status_set() is not precise enough
for the suspend-to-idle implementation in Linux and in some cases it is
necessary make it skip one GPE (specifically, the EC GPE) from the check
to prevent a race condition leading to a premature system resume from
occurring.
For this reason, redefine acpi_any_gpe_status_set() to take the number
of a GPE to skip as an argument.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629
Tested-by: Ondřej Caletka <ondrej@caletka.cz>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to avoid future header hell, remove the inclusion of
proc_fs.h from acpi_bus.h. All it needs is a forward declaration of a
struct.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/20200321113241.246190285@linutronix.de
|
