summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2018-07-08Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Bug fixes for ext4; most of which relate to vulnerabilities where a maliciously crafted file system image can result in a kernel OOPS or hang. At least one fix addresses an inline data bug could be triggered by userspace without the need of a crafted file system (although it does require that the inline data feature be enabled)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: check superblock mapped prior to committing ext4: add more mount time checks of the superblock ext4: add more inode number paranoia checks ext4: avoid running out of journal credits when appending to an inline file jbd2: don't mark block as modified if the handle is out of credits ext4: never move the system.data xattr out of the inode body ext4: clear i_data in ext4_inode_info when removing inline data ext4: include the illegal physical block in the bad map ext4_error msg ext4: verify the depth of extent tree in ext4_find_extent() ext4: only look at the bg_flags field if it is valid ext4: make sure bitmaps and the inode table don't overlap with bg descriptors ext4: always check block group bounds in ext4_init_block_bitmap() ext4: always verify the magic number in xattr blocks ext4: add corruption check in ext4_xattr_set_entry() ext4: add warn_on_error mount option
2018-07-07Merge tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Five smb3/cifs fixes for stable (including for some leaks and memory overwrites) and also a few fixes for recent regressions in packet signing. Additional testing at the recent SMB3 test event, and some good work by Paulo and others spotted the issues fixed here. In addition to my xfstest runs on these, Aurelien and Stefano did additional test runs to verify this set" * tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf() cifs: Fix infinite loop when using hard mount option cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting cifs: Fix memory leak in smb2_set_ea() cifs: fix SMB1 breakage cifs: Fix validation of signed data in smb2 cifs: Fix validation of signed data in smb3+ cifs: Fix use after free of a mid_q_entry
2018-07-05Fix up non-directory creation in SGID directoriesLinus Torvalds
sgid directories have special semantics, making newly created files in the directory belong to the group of the directory, and newly created subdirectories will also become sgid. This is historically used for group-shared directories. But group directories writable by non-group members should not imply that such non-group members can magically join the group, so make sure to clear the sgid bit on non-directories for non-members (but remember that sgid without group execute means "mandatory locking", just to confuse things even more). Reported-by: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-05cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()Stefano Brivio
smb{2,3}_create_lease_buf() store a lease key in the lease context for later usage on a lease break. In most paths, the key is currently sourced from data that happens to be on the stack near local variables for oplock in SMB2_open() callers, e.g. from open_shroot(), whereas smb2_open_file() properly allocates space on its stack for it. The address of those local variables holding the oplock is then passed to create_lease_buf handlers via SMB2_open(), and 16 bytes near oplock are used. This causes a stack out-of-bounds access as reported by KASAN on SMB2.1 and SMB3 mounts (first out-of-bounds access is shown here): [ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985 [ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91 [ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 111.536838] Call Trace: [ 111.537528] dump_stack+0xc2/0x16b [ 111.540890] print_address_description+0x6a/0x270 [ 111.542185] kasan_report+0x258/0x380 [ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs] [ 111.575883] open_shroot+0x339/0x550 [cifs] [ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs] [ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs] [ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs] [ 111.677915] mount_fs+0x55/0x2b0 [ 111.679504] vfs_kern_mount.part.22+0xaa/0x430 [ 111.684511] do_mount+0xc40/0x2660 [ 111.698301] ksys_mount+0x80/0xd0 [ 111.701541] do_syscall_64+0x14e/0x4b0 [ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 111.713665] RIP: 0033:0x7f372385b5fa [ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48 [ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa [ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f [ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000 [ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000 [ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000 [ 111.735448] The buggy address belongs to the page: [ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 111.739890] flags: 0x17ffffc0000000() [ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000 [ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 111.746679] page dumped because: kasan: bad access detected [ 111.750482] Memory state around the buggy address: [ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 [ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2 [ 111.759801] ^ [ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.766913] ================================================================== Lease keys are however already generated and stored in fid data on open and create paths: pass them down to the lease context creation handlers and use them. Suggested-by: Aurélien Aptel <aaptel@suse.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix infinite loop when using hard mount optionPaulo Alcantara
For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE settingStefano Brivio
A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by: Jianhong Yin <jiyin@redhat.com> Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix memory leak in smb2_set_ea()Paulo Alcantara
This patch fixes a memory leak when doing a setxattr(2) in SMB2+. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-07-05cifs: fix SMB1 breakageRonnie Sahlberg
SMB1 mounting broke in commit 35e2cc1ba755 ("cifs: Use correct packet length in SMB2_TRANSFORM header") Fix it and also rename smb2_rqst_len to smb_rqst_len to make it less unobvious that the function is also called from CIFS/SMB1 Good job by Paulo reviewing and cleaning up Ronnie's original patch. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara <palcantara@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb2Paulo Alcantara
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix validation of signed data in smb3+Paulo Alcantara
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack") We failed to validate signed data returned by the server because __cifs_calc_signature() now expects to sign the actual data in iov but we were also passing down the rfc1002 length. Fix smb3_calc_signature() to calculate signature of rfc1002 length prior to passing only the actual data iov[1-N] to __cifs_calc_signature(). In addition, there are a few cases where no rfc1002 length is passed so we make sure there's one (iov_len == 4). Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05cifs: Fix use after free of a mid_q_entryLars Persson
With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by: Lars Persson <larper@axis.com> Acked-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-07-05autofs: rename 'autofs' module back to 'autofs4'Linus Torvalds
It turns out that systemd has a bug: it wants to load the autofs module early because of some initialization ordering with udev, and it doesn't do that correctly. Everywhere else it does the proper "look up module name" that does the proper alias resolution, but in that early code, it just uses a hardcoded "autofs4" for the module name. The result of that is that as of commit a2225d931f75 ("autofs: remove left-over autofs4 stubs"), you get systemd[1]: Failed to insert module 'autofs4': No such file or directory in the system logs, and a lack of module loading. All this despite the fact that we had very clearly marked 'autofs4' as an alias for this module. What's so ridiculous about this is that literally everything else does the module alias handling correctly, including really old versions of systemd (that just used 'modprobe' to do this), and even all the other systemd module loading code. Only that special systemd early module load code is broken, hardcoding the module names for not just 'autofs4', but also "ipv6", "unix", "ip_tables" and "virtio_rng". Very annoying. Instead of creating an _additional_ separate compatibility 'autofs4' module, just rely on the fact that everybody else gets this right, and just call the module 'autofs4' for compatibility reasons, with 'autofs' as the alias name. That will allow the systemd people to fix their bugs, adding the proper alias handling, and maybe even fix the name of the module to be just "autofs" (so that they can _test_ the alias handling). And eventually, we can revert this silly compatibility hack. See also https://github.com/systemd/systemd/issues/9501 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946 for the systemd bug reports upstream and in the Debian bug tracker respectively. Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs") Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Michael Biebl <biebl@debian.org> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte accessJanosch Frank
Use huge_ptep_get() to translate huge ptes to normal ptes so we can check them with the huge_pte_* functions. Otherwise some architectures will check the wrong values and will not wait for userspace to bring in the memory. Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-02ext4: check superblock mapped prior to committingJon Derrick
This patch attempts to close a hole leading to a BUG seen with hot removals during writes [1]. A block device (NVME namespace in this test case) is formatted to EXT4 without partitions. It's mounted and write I/O is run to a file, then the device is hot removed from the slot. The superblock attempts to be written to the drive which is no longer present. The typical chain of events leading to the BUG: ext4_commit_super() __sync_dirty_buffer() submit_bh() submit_bh_wbc() BUG_ON(!buffer_mapped(bh)); This fix checks for the superblock's buffer head being mapped prior to syncing. [1] https://www.spinics.net/lists/linux-ext4/msg56527.html Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-07-01Merge tag 'for-4.18-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We have a few regression fixes for qgroup rescan status tracking and the vm_fault_t conversion that mixed up the error values" * tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix mount failure when qgroup rescan is in progress Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
2018-07-01Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fix from Al Viro: "Followup to procfs-seq_file series this window" This fixes a memory leak by making sure that proc seq files release any private data on close. The 'proc_seq_open' has to be properly paired with 'proc_seq_release' that releases the extra private data. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: proc: add proc_seq_release
2018-06-29Merge tag 'ceph-for-4.18-rc3' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A trivial dentry leak fix from Zheng" * tag 'ceph-for-4.18-rc3' of git://github.com/ceph/ceph-client: ceph: fix dentry leak in splice_dentry()
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28Btrfs: fix mount failure when qgroup rescan is in progressFilipe Manana
If a power failure happens while the qgroup rescan kthread is running, the next mount operation will always fail. This is because of a recent regression that makes qgroup_rescan_init() incorrectly return -EINVAL when we are mounting the filesystem (through btrfs_read_qgroup_config()). This causes the -EINVAL error to be returned regardless of any qgroup flags being set instead of returning the error only when neither of the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON are set. A test case for fstests follows up soon. Fixes: 9593bf49675e ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-28Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversionChris Mason
The vm_fault_t conversion commit introduced a ret2 variable for tracking the integer return values from internal btrfs functions. It was sometimes returning VM_FAULT_LOCKED for pages that were actually invalid and had been removed from the radix. Something like this: ret2 = btrfs_delalloc_reserve_space() // returns zero on success lock_page(page) if (page->mapping != inode->i_mapping) goto out_unlock; ... out_unlock: if (!ret2) { ... return VM_FAULT_LOCKED; } This ends up triggering this WARNING in btrfs_destroy_inode() WARN_ON(BTRFS_I(inode)->block_rsv.size); xfstests generic/095 was able to reliably reproduce the errors. Since out_unlock: is only used for errors, this fix moves it below the if (!ret2) check we use to return VM_FAULT_LOCKED for success. Fixes: a528a2415087 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t) Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-28btrfs: quota: Set rescan progress to (u64)-1 if we hit last leafQu Wenruo
Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") added a new exit for rescan finish. However after finishing quota rescan, we set fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the original exit path. While we missed that assignment of (u64)-1 in the new exit path. The end result is, the quota status item doesn't have the same value. (-1 vs the last bytenr + 1) Although it doesn't affect quota accounting, it's still better to keep the original behavior. Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-27proc: add proc_seq_releaseChunyu Hu
kmemleak reported some memory leak on reading proc files. After adding some debug lines, find that proc_seq_fops is using seq_release as release handler, which won't handle the free of 'private' field of seq_file, while in fact the open handler proc_seq_open could create the private data with __seq_open_private when state_size is greater than zero. So after reading files created with proc_create_seq_private, such as /proc/timer_list and /proc/vmallocinfo, the private mem of a seq_file is not freed. Fix it by adding the paired proc_seq_release as the default release handler of proc_seq_ops instead of seq_release. Fixes: 44414d82cfe0 ("proc: introduce proc_create_seq_private") Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-06-27Merge tag 'xfs-4.18-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: "Here are some patches for 4.18 to fix regressions, accounting problems, overflow problems, and to strengthen metadata validation to prevent corruption. This series has been run through a full xfstests run over the weekend and through a quick xfstests run against this morning's master, with no major failures reported. Changes since last update: - more metadata validation strengthening to prevent crashes. - fix extent offset overflow problem when insert_range on a 512b block fs - fix some off-by-one errors in the realtime fsmap code - fix some math errors in the default resblks calculation when free space is low - fix a problem where stale page contents are exposed via mmap read after a zero_range at eof - fix accounting problems with per-ag reservations causing statfs reports to vary incorrectly" * tag 'xfs-4.18-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix fdblocks accounting w/ RMAPBT per-AG reservation xfs: ensure post-EOF zeroing happens after zeroing part of a file xfs: fix off-by-one error in xfs_rtalloc_query_range xfs: fix uninitialized field in rtbitmap fsmap backend xfs: recheck reflink state after grabbing ILOCK_SHARED for a write xfs: don't allow insert-range to shift extents past the maximum offset xfs: don't trip over negative free space in xfs_reserve_blocks xfs: allow empty transactions while frozen xfs: xfs_iflush_abort() can be called twice on cluster writeback failure xfs: More robust inode extent count validation xfs: simplify xfs_bmap_punch_delalloc_range
2018-06-26ceph: fix dentry leak in splice_dentry()Yan, Zheng
In any case, d_splice_alias() does not drop reference of original dentry. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-26Merge tag 'for-4.18-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two regression fixes and an incorrect error value propagation fix from 'rename exchange'" * tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix return value on rename exchange failure btrfs: fix invalid-free in btrfs_extent_same Btrfs: fix physical offset reported by fiemap for inline extents
2018-06-24xfs: fix fdblocks accounting w/ RMAPBT per-AG reservationDarrick J. Wong
In __xfs_ag_resv_init we incorrectly calculate the amount by which to decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt allocations do not decrease fdblocks, we must decrease fdblocks by the entire size of the requested reservation in order to achieve our goal of always having enough free blocks to satisfy an rmapbt expansion. This is in contrast to the refcountbt/finobt, which /do/ subtract from fdblocks whenever they allocate a block. For this allocation type we preserve the existing behavior where we decrease fdblocks only by the requested reservation minus the size of the existing tree. This fixes the problem where the available block counts reported by statfs change across a remount if there had been an rmapbt size change since mount time. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2018-06-24xfs: ensure post-EOF zeroing happens after zeroing part of a fileDarrick J. Wong
If a user asks us to zero_range part of a file, the end of the range is EOF, and not aligned to a page boundary, invoke writeback of the EOF page to ensure that the post-EOF part of the page is zeroed. This ensures that we don't expose stale memory contents via mmap, if in a clumsy manner. Found by running generic/127 when it runs zero_range and mapread at EOF one after the other. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2018-06-24xfs: fix off-by-one error in xfs_rtalloc_query_rangeDarrick J. Wong
In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks") we strengthened the input parameter checks in the rtbitmap range query function, but introduced an off-by-one error in the process. The call to xfs_rtfind_forw deals with the high key being rextents, but we clamp the high key to rextents - 1. This causes the returned results to stop one block short of the end of the rtdev, which is incorrect. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-24xfs: fix uninitialized field in rtbitmap fsmap backendDarrick J. Wong
Initialize the extent count field of the high key so that when we use the high key to synthesize an 'unknown owner' record (i.e. used space record) at the end of the queried range we have a field with which to compute rm_blockcount. This is not strictly necessary because the synthesizer never uses the rm_blockcount field, but we can shut up the static code analysis anyway. Coverity-id: 1437358 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-24xfs: recheck reflink state after grabbing ILOCK_SHARED for a writeDarrick J. Wong
The reflink iflag could have changed since the earlier unlocked check, so if we got ILOCK_SHARED for a write and but we're now a reflink inode we have to switch to ILOCK_EXCL and relock. This helps us avoid blowing lock assertions in things like generic/166: XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_EXCL), file: fs/xfs/xfs_reflink.c, line: 383 WARNING: CPU: 1 PID: 24707 at fs/xfs/xfs_message.c:104 assfail+0x25/0x30 [xfs] Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug] CPU: 1 PID: 24707 Comm: xfs_io Not tainted 4.18.0-rc1-djw #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:assfail+0x25/0x30 [xfs] Code: ff 0f 0b c3 90 66 66 66 66 90 48 89 f1 41 89 d0 48 c7 c6 e8 ef 1b a0 48 89 fa 31 ff e8 54 f9 ff ff 80 3d fd ba 0f 00 00 75 03 <0f> 0b c3 0f 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 63 f6 49 89 f9 RSP: 0018:ffffc90006423ad8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880030b65e80 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa01b0447 RBP: ffffc90006423c10 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88003d43fc30 R11: f000000000000000 R12: ffff880077cda000 R13: 0000000000000000 R14: ffffc90006423c30 R15: ffffc90006423bf9 FS: 00007feba8986800(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000138ab58 CR3: 000000003d40a000 CR4: 00000000000006a0 Call Trace: xfs_reflink_allocate_cow+0x24c/0x3d0 [xfs] xfs_file_iomap_begin+0x6d2/0xeb0 [xfs] ? iomap_to_fiemap+0x80/0x80 iomap_apply+0x5e/0x130 iomap_dio_rw+0x2e0/0x400 ? iomap_to_fiemap+0x80/0x80 ? xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_dio_aio_write+0x133/0x4a0 [xfs] xfs_file_write_iter+0x7b/0xb0 [xfs] __vfs_write+0x16f/0x1f0 vfs_write+0xc8/0x1c0 ksys_pwrite64+0x74/0x90 do_syscall_64+0x56/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-24xfs: don't allow insert-range to shift extents past the maximum offsetDarrick J. Wong
Zorro Lang reports that generic/485 blows an assert on a filesystem with 512 byte blocks. The test tries to fallocate a post-eof extent at the maximum file size and calls insert range to shift the extents right by two blocks. On a 512b block filesystem this causes startoff to overflow the 54-bit startoff field, leading to the assert. Therefore, always check the rightmost extent to see if it would overflow prior to invoking the insert range machinery. Reported-by: zlang@redhat.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-24xfs: don't trip over negative free space in xfs_reserve_blocksDarrick J. Wong
If we somehow end up with a filesystem that has fewer free blocks than the blocks set aside to avoid ENOSPC deadlocks, it's possible that the free space calculation in xfs_reserve_blocks will spit out a negative number (because percpu_counter_sum returns s64). We fail to notice this negative number and set fdblks_delta to it. Now we increment fdblocks(!) and the unsigned type of m_resblks means that we end up setting a ridiculously huge m_resblks reservation. Avoid this comedy of errors by detecting the negative free space and returning -ENOSPC. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-24xfs: allow empty transactions while frozenDarrick J. Wong
In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we created the ability to obtain empty transactions. These transactions have no log or block reservations and therefore can't modify anything. Since they're also NO_WRITECOUNT they can run while the fs is frozen, so we don't need to WARN_ON about that usage. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-06-22Btrfs: fix return value on rename exchange failureFilipe Manana
If we failed during a rename exchange operation after starting/joining a transaction, we would end up replacing the return value, stored in the local 'ret' variable, with the return value from btrfs_end_transaction(). So this could end up returning 0 (success) to user space despite the operation having failed and aborted the transaction, because if there are multiple tasks having a reference on the transaction at the time btrfs_end_transaction() is called by the rename exchange, that function returns 0 (otherwise it returns -EIO and not the original error value). So fix this by not overwriting the return value on error after getting a transaction handle. Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT") CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-22Merge tag 'for_v4.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull udf, quota, ext2 fixes from Jan Kara: "UDF: - fix an oops due to corrupted disk image - two small cleanups quota: - a fixfor lru handling - cleanup ext2: - a warning about a deprecated mount option" * tag 'for_v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Drop unused arguments of udf_delete_aext() udf: Provide function for calculating dir entry length udf: Detect incorrect directory size ext2: add warning when specifying nocheck option quota: Cleanup list iteration in dqcache_shrink_scan() quota: reclaim least recently used dquots
2018-06-21xfs: xfs_iflush_abort() can be called twice on cluster writeback failureDave Chinner
When a corrupt inode is detected during xfs_iflush_cluster, we can get a shutdown ASSERT failure like this: XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116 XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88 XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9 XFS (pmem1): Please umount the filesystem and rectify the problem(s) XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258 ..... Call Trace: xfs_iflush_abort+0x10a/0x110 xfs_iflush+0xf3/0x390 xfs_inode_item_push+0x126/0x1e0 xfsaild+0x2c5/0x890 kthread+0x11c/0x140 ret_from_fork+0x24/0x30 Essentially, xfs_iflush_abort() has been called twice on the original inode that that was flushed. This happens because the inode has been flushed to teh buffer successfully via xfs_iflush_int(), and so when another inode is detected as corrupt in xfs_iflush_cluster, the buffer is marked stale and EIO, and iodone callbacks are run on it. Running the iodone callbacks walks across the original inode and calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns to xfs_iflush(), it runs the error path for that function, and that calls xfs_iflush_abort() on the inode a second time, leading to the above assert failure as the inode is not flush locked anymore. This bug has been there a long time. The simple fix would be to just avoid calling xfs_iflush_abort() in xfs_iflush() if we've got a failure from xfs_iflush_cluster(). However, xfs_iflush_cluster() has magic delwri buffer handling that means it may or may not have run IO completion on the buffer, and hence sometimes we have to call xfs_iflush_abort() from xfs_iflush(), and sometimes we shouldn't. After reading through all the error paths and the delwri buffer code, it's clear that the error handling in xfs_iflush_cluster() is unnecessary. If the buffer is delwri, it leaves it on the delwri list so that when the delwri list is submitted it sees a shutdown fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO and runs IO completion. i.e. exactly what xfs+iflush_cluster() does when it's not a delwri buffer. Further, marking a buffer stale clears the _XBF_DELWRI_Q flag on the buffer, which means when submission of the buffer occurs, it just skips over it and releases it. IOWs, the error handling in xfs_iflush_cluster doesn't need to care if the buffer is already on a the delwri queue or not - it just needs to mark the buffer stale, EIO and run completions. That means we can just use the easy fix for xfs_iflush() to avoid the double abort. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-21xfs: More robust inode extent count validationDave Chinner
When the inode is in extent format, it can't have more extents that fit in the inode fork. We don't currenty check this, and so this corruption goes unnoticed by the inode verifiers. This can lead to crashes operating on invalid in-memory structures. Attempts to access such a inode will now error out in the verifier rather than allowing modification operations to proceed. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix a typedef, add some braces and breaks to shut up compiler warnings] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-21xfs: simplify xfs_bmap_punch_delalloc_rangeChristoph Hellwig
Instead of using xfs_bmapi_read to find delalloc extents and then punch them out using xfs_bunmapi, opencode the loop to iterate over the extents and call xfs_bmap_del_extent_delay directly. This both simplifies the code and reduces the number of extent tree lookups required. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-22Merge tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include: - fix an rcu deadlock in nfs_delegation_find_inode() - fix NFSv4 deadlocks due to not freeing the session slot in layoutget - don't send layoutreturn if the layout is already invalid - prevent duplicate XID allocation - flexfiles: Don't tie up all the rpciod threads in resends" * tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Process writeback resends from nfsiod context as well pNFS/flexfiles: Don't tie up all the rpciod threads in resends sunrpc: Prevent duplicate XID allocation pNFS: Don't send layoutreturn if the layout is already invalid pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception NFS: Fix an rcu deadlock in nfs_delegation_find_inode()
2018-06-21btrfs: fix invalid-free in btrfs_extent_sameLu Fengqi
If this condition ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != (BTRFS_I(dst)->flags & BTRFS_INODE_NODATASUM)) is hit, we will go to free the uninitialized cmp.src_pages and cmp.dst_pages. Fixes: 67b07bd4bec5 ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl") Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-21Btrfs: fix physical offset reported by fiemap for inline extentsFilipe Manana
Commit 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") introduced a regression where we no longer report 0 as the physical offset for inline extents (and other extents with a special block_start value). This is because it always sets the variable used to report the physical offset ("disko") as em->block_start plus some offset, and em->block_start has the value 18446744073709551614 ((u64) -2) for inline extents. This made the btrfs test 004 (from fstests) often fail, for example, for a file with an inline extent we have the following items in the subvolume tree: item 101 key (418 INODE_ITEM 0) itemoff 11029 itemsize 160 generation 25 transid 38 size 1525 nbytes 1525 block group 0 mode 100666 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x2(none) atime 1529342058.461891730 (2018-06-18 18:14:18) ctime 1529342058.461891730 (2018-06-18 18:14:18) mtime 1529342058.461891730 (2018-06-18 18:14:18) otime 1529342055.869892885 (2018-06-18 18:14:15) item 102 key (418 INODE_REF 264) itemoff 11016 itemsize 13 index 25 namelen 3 name: fc7 item 103 key (418 EXTENT_DATA 0) itemoff 9470 itemsize 1546 generation 38 type 0 (inline) inline extent data size 1525 ram_bytes 1525 compression 0 (none) Then when test 004 invoked fiemap against the file it got a non-zero physical offset: $ filefrag -v /mnt/p0/d4/d7/fc7 Filesystem type is: 9123683e File size of /mnt/p0/d4/d7/fc7 is 1525 (1 block of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 4095: 18446744073709551614.. 4093: 4096: last,not_aligned,inline,eof /mnt/p0/d4/d7/fc7: 1 extent found This resulted in the test failing like this: btrfs/004 49s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad) --- tests/btrfs/004.out 2016-08-23 10:17:35.027012095 +0100 +++ /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad 2018-06-18 18:15:02.385872155 +0100 @@ -1,3 +1,10 @@ QA output created by 004 *** test backref walking -*** done +./tests/btrfs/004: line 227: [: 7.55578637259143e+22: integer expression expected +ERROR: 7.55578637259143e+22 is not a valid numeric value. +unexpected output from + /home/fdmanana/git/hub/btrfs-progs/btrfs inspect-internal logical-resolve -s 65536 -P 7.55578637259143e+22 /home/fdmanana/btrfs-tests/scratch_1 ... (Run 'diff -u tests/btrfs/004.out /home/fdmanana/git/hub/xfstests/results//btrfs/004.out.bad' to see the entire diff) Ran: btrfs/004 The large number in scientific notation reported as an invalid numeric value is the result from the filter passed to perl which multiplies the physical offset by the block size reported by fiemap. So fix this by ensuring the physical offset is always set to 0 when we are processing an extent with a special block_start value. Fixes: 9d311e11fc1f ("Btrfs: fiemap: pass correct bytenr when fm_extent_count is zero") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-06-20udf: Drop unused arguments of udf_delete_aext()Jan Kara
udf_delete_aext() uses its last two arguments only as local variables. Drop them. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Provide function for calculating dir entry lengthJan Kara
Provide function for calculating directory entry length and use to reduce code duplication. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Detect incorrect directory sizeJan Kara
Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20ext2: add warning when specifying nocheck optionChengguang Xu
The option nocheck(nocheck/check=none) is useless but considering backwards compatibility it's better to print warning for a while before completely remove from the code. This patch add proper warning message for option 'nocheck' and remove unnecessary comment/function declaration which is used for removed option 'check'. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20quota: Cleanup list iteration in dqcache_shrink_scan()Jan Kara
Use list_first_entry() and list_empty() instead of opencoded variants. Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20quota: reclaim least recently used dquotsGreg Thelen
The dquots in the free_dquots list are not reclaimed in LRU way. put_dquot_last() puts entries to the tail and dqcache_shrink_scan() frees from the tail. Free unreferenced dquots in LRU order because it seems more reasonable than freeing most recently used. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20proc: fix missing final NUL in get_mm_cmdline() rewriteLinus Torvalds
The rewrite of the cmdline fetching missed the fact that we used to also return the final terminating NUL character of the last argument. I hadn't noticed, and none of the tools I tested cared, but something obviously must care, because Michal Kubecek noticed the change in behavior. Tweak the "find the end" logic to actually include the NUL character, and once past the eend of argv, always start the strnlen() at the expected (original) argument end. This whole "allow people to rewrite their arguments in place" is a nasty hack and requires that odd slop handling at the end of the argv array, but it's our traditional model, so we continue to support it. Repored-and-bisected-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-and-tested-by: Michal Kubecek <mkubecek@suse.cz> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-19pNFS/flexfiles: Process writeback resends from nfsiod context as wellTrond Myklebust
Although the writeback resends are more robust than the reads, since they are not immediately rescheduled by the same thread, we are better off processing them in the same place as the reads. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-19pNFS/flexfiles: Don't tie up all the rpciod threads in resendsTrond Myklebust
We do not want to have rpciod threads perform recursive calls into the RPC layer since that can deadlock. In particular, having to wait for a layoutget can be nasty... We want rather to defer scheduling those retries until we're in the rpc_release() callback, since that is called from the nfsiod workqueue. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 06:32:58 +0000