| Age | Commit message (Collapse) | Author |
|---|
|
Both close and delegreturn have identical code to handle pNFS
return-on-close. This patch refactors that code and places it
in pnfs.c
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.
Fixes: 1c5bd76d17cca ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This check has been hanging out since we used to have parallel paths to add
dentry in nfs_create(), but that hasn't been the case for some years.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Since commit b0c6108ecf64 ("nfs_instantiate(): prevent multiple aliases for
directory inode"), nfs_instantiate() may succeed without actually
instantiating the dentry that was passed in. That can be problematic for
some callers in NFSv3, so this patch breaks things up so we can get the
actual dentry obtained.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This removes some code duplication, since both functions were doing the
same thing.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We need to use the custom rpc_task_setup here to set the
RPC_TASK_NO_ROUND_ROBIN flag on the RPC call.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
An async call followed by an rpc_wait_for_completion() is basically the
same as a synchronous call, so we can use nfs4_call_sync_custom() to
keep our custom callback ops and the RPC_TASK_NO_ROUND_ROBIN flag.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We do this to set the RPC_TASK_NO_ROUND_ROBIN flag in the task_setup
structure
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Rather than running the task manually
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There are a few cases where we need to manually configure the
rpc_task_setup structure to get the behavior we want.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In nfs4_try_migration(), if nfs4_begin_drain_session() fails, the
previously allocated 'page' and 'locations' are not deallocated, leading to
memory leaks. To fix this issue, go to the 'out' label to free 'page' and
'locations' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))
When label is NULL, it is used on lines 1178-1181:
*p++ = cpu_to_be32(label->lfs);
*p++ = cpu_to_be32(label->pi);
*p++ = cpu_to_be32(label->len);
p = xdr_encode_opaque_fixed(p, label->label, label->len);
To fix these bugs, label is checked before being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two fixes that popped up during testing:
- fix for sysfs-related code that adds/removes block groups, warnings
appear during several fstests in connection with sysfs updates in
5.3, the fix essentially replaces a workaround with scope NOFS and
applies to 5.2-based branch too
- add sanity check of trim range"
* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: trim: Check the range passed into to prevent overflow
Btrfs: fix sysfs warning and missing raid sysfs directories
|
|
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
were still corner cases there, and even though I had a solution for
it, it's too involved for this stage. (me)
- Set of NVMe fixes (via Sagi)
- io_uring fix for fixed buffers (Anthony)
- io_uring defer issue fix (Jackie)
- Regression fix for queue sync at exit time (zhengbin)
- xen blk-back memory leak fix (Wenwen)"
* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
block: remove REQ_NOWAIT_INLINE
io_uring: fix manual setup of iov_iter for fixed buffers
xen/blkback: fix memory leaks
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
nvme-pci: Fix async probe remove race
nvme: fix controller removal race with scan work
nvme-rdma: fix possible use-after-free in connect error flow
nvme: fix a possible deadlock when passthru commands sent to a multipath device
nvme-core: Fix extra device_put() call on error path
nvmet-file: fix nvmet_file_flush() always returning an error
nvmet-loop: Flush nvme_delete_wq when removing the port
nvmet: Fix use-after-free bug when a port is removed
nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
|
|
Pull xfs fixes from Darrick Wong:
- Fix crashes when the attr fork isn't present due to errors but inode
inactivation tries to zap the attr data anyway.
- Convert more directory corruption debugging asserts to actual
EFSCORRUPTED returns instead of blowing up later on.
- Don't fail writeback just because we ran out of memory allocating
metadata log data.
* tag 'xfs-5.3-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't crash on null attr fork xfs_bmapi_read
xfs: remove more ondisk directory corruption asserts
fs: xfs: xfs_log: Don't use KM_MAYFAIL at xfs_log_reserve().
|
|
This patch may fix two issues:
First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into
defer list to delay execution, but link io will be actively scheduled to
run by calling io_queue_sqe.
Second, when multiple LINK_IOs are inserted together with defer_list,
the LINK_IO is no longer keep order.
|-------------|
| LINK_IO | ----> insert to defer_list -----------
|-------------| |
| LINK_IO | ----> insert to defer_list ----------|
|-------------| |
| LINK_IO | ----> insert to defer_list ----------|
|-------------| |
| NORMAL_IO | ----> insert to defer_list ----------|
|-------------| |
|
queue_work at same time <-----|
Fixes: 9e645e1105c ("io_uring: add support for sqe links")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We had a few issues with this code, and there's still a problem around
how we deal with error handling for chained/split bios. For now, just
revert the code and we'll try again with a thoroug solution. This
reverts commits:
e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments")
0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments")
6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed
buffers") introduced an optimization to avoid using the slow
iov_iter_advance by manually populating the iov_iter iterator in some
cases.
However, the computation of the iterator count field was erroneous: The
first bvec was always accounted for an extent of page size even if the
bvec length was smaller.
In consequence, some I/O operations on fixed buffers were unable to
operate on the full extent of the buffer, consistently skipping some
bytes at the end of it.
Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Cc: stable@vger.kernel.org
Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs fixes from David Howells:
- Fix the CB.ProbeUuid handler to generate its reply correctly.
- Fix a mix up in indices when parsing a Volume Location entry record.
- Fix a potential NULL-pointer deref when cleaning up a read request.
- Fix the expected data version of the destination directory in
afs_rename().
- Fix afs_d_revalidate() to only update d_fsdata if it's not the same
as the directory data version to reduce the likelihood of overwriting
the result of a competing operation. (d_fsdata carries the directory
DV or the least-significant word thereof).
- Fix the tracking of the data-version on a directory and make sure
that dentry objects get properly initialised, updated and
revalidated.
Also fix rename to update d_fsdata to match the new directory's DV if
the dentry gets moved over and unhash the dentry to stop
afs_d_revalidate() from interfering.
* tag 'afs-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix missing dentry data version updating
afs: Only update d_fsdata if different in afs_d_revalidate()
afs: Fix off-by-one in afs_rename() expected data version calculation
fs: afs: Fix a possible null-pointer dereference in afs_put_read()
afs: Fix loop index mixup in afs_deliver_vl_get_entry_by_name_u()
afs: Fix the CB.ProbeUuid service handler to reply correctly
|
|
If you use lseek or similar (e.g. pread) to access a location in a
seq_file file that is within a record, rather than at a record boundary,
then the first read will return the remainder of the record, and the
second read will return the whole of that same record (instead of the
next record). When seeking to a record boundary, the next record is
correctly returned.
This bug was introduced by a recent patch (identified below). Before
that patch, seq_read() would increment m->index when the last of the
buffer was returned (m->count == 0). After that patch, we rely on
->next to increment m->index after filling the buffer - but there was
one place where that didn't happen.
Link: https://lkml.kernel.org/lkml/877e7xl029.fsf@notabene.neil.brown.name/
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.com>
Reported-by: Sergei Turchanov <turchanov@farpost.com>
Tested-by: Sergei Turchanov <turchanov@farpost.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Zorro Lang reported a crash in generic/475 if we try to inactivate a
corrupt inode with a NULL attr fork (stack trace shortened somewhat):
RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs]
RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012
RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef
R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004
R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001
FS: 00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0
Call Trace:
xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs]
xfs_da_read_buf+0xf5/0x2c0 [xfs]
xfs_da3_node_read+0x1d/0x230 [xfs]
xfs_attr_inactive+0x3cc/0x5e0 [xfs]
xfs_inactive+0x4c8/0x5b0 [xfs]
xfs_fs_destroy_inode+0x31b/0x8e0 [xfs]
destroy_inode+0xbc/0x190
xfs_bulkstat_one_int+0xa8c/0x1200 [xfs]
xfs_bulkstat_one+0x16/0x20 [xfs]
xfs_bulkstat+0x6fa/0xf20 [xfs]
xfs_ioc_bulkstat+0x182/0x2b0 [xfs]
xfs_file_ioctl+0xee0/0x12a0 [xfs]
do_vfs_ioctl+0x193/0x1000
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x9f/0x4d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f11d39a3e5b
The "obvious" cause is that the attr ifork is null despite the inode
claiming an attr fork having at least one extent, but it's not so
obvious why we ended up with an inode in that state.
Reported-by: Zorro Lang <zlang@redhat.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
Continue our game of replacing ASSERTs for corrupt ondisk metadata with
EFSCORRUPTED returns.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A filesystem-dax and device-dax fix for v5.3.
The filesystem-dax fix is tagged for stable as the implementation has
been mistakenly throwing away all cow pages on any truncate or hole
punch operation as part of the solution to coordinate device-dma vs
truncate to dax pages.
The device-dax change fixes up a regression this cycle from the
introduction of a common 'internal per-cpu-ref' implementation.
Summary:
- Fix dax_layout_busy_page() to not discard private cow pages of
fs/dax private mappings.
- Update the memremap_pages core to properly cleanup on behalf of
internal reference-count users like device-dax"
* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm/memremap: Fix reuse of pgmap instances with internal references
dax: dax_layout_busy_page() should not unmap cow pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix incorrect lseek / fiemap results"
* tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_walk_metadata fix
|
|
Pull block fixes from Jens Axboe:
- Revert of a bcache patch that caused an oops for some (Coly)
- ata rb532 unused warning fix (Gustavo)
- AoE kernel crash fix (He)
- Error handling fixup for blkdev_get() (Jan)
- libata read/write translation and SFF PIO fix (me)
- Use after free and error handling fix for O_DIRECT fragments. There's
still a nowait + sync oddity in there, we'll nail that start next
week. If all else fails, I'll queue a revert of the NOWAIT change.
(me)
- Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas)
- Two BFQ regression fixes that caused crashes (Paolo)
* tag 'for-linus-20190809' of git://git.kernel.dk/linux-block:
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
loop: set PF_MEMALLOC_NOIO for the worker thread
bdev: Fixup error handling in blkdev_get()
block, bfq: handle NULL return value by bfq_init_rq()
block, bfq: move update of waker and woken list to queue freeing
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
block: aoe: Fix kernel crash due to atomic sleep when exiting
libata: add SG safety checks in SFF pio transfers
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
block: fix O_DIRECT error handling for bio fragments
ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
|
|
It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size. This will confuse fiemap as well as lseek with the
SEEK_DATA flag.
Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.
Fixes xfstest generic/490.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
|
|
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv4: Ensure we check the return value of update_open_stateid() so
we correctly track active open state.
- NFSv4: Fix for delegation state recovery to ensure we recover all
open modes that are active.
- NFSv4: Fix an Oops in nfs4_do_setattr
Fixes:
- NFS: Fix regression whereby fscache errors are appearing on 'nofsc'
mounts
- NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
- NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
- pNFS: Report errors from the call to nfs4_select_rw_stateid()
- NFSv4: Various other delegation and open stateid recovery fixes
- NFSv4: Fix state recovery behaviour when server connection times
out"
* tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Ensure state recovery handles ETIMEDOUT correctly
NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts
NFSv4: Fix an Oops in nfs4_do_setattr
NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
NFSv4: Check the return value of update_open_stateid()
NFSv4.1: Only reap expired delegations
NFSv4.1: Fix open stateid recovery
NFSv4: Report the error from nfs4_select_rw_stateid()
NFSv4: When recovering state fails with EAGAIN, retry the same recovery
NFSv4: Print an error in the syslog when state is marked as irrecoverable
NFSv4: Fix delegation state recovery
NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
|
|
Pull cifs fixes from Steve French:
"Six small SMB3 fixes, two for stable"
* tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL
smb3: update TODO list of missing features
smb3: send CAP_DFS capability during session setup
SMB3: Fix potential memory leak when processing compound chain
SMB3: Fix deadlock in validate negotiate hits reconnect
cifs: fix rmmod regression in cifs.ko caused by force_sig changes
|
|
Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with
LOOP_SET_FD") converted blkdev_get() to use the new helpers for
finishing claiming of a block device. However the conversion botched the
error handling in blkdev_get() and thus the bdev has been marked as held
even in case __blkdev_get() returned error. This led to occasional
warnings with block/001 test from blktests like:
kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0
Correct the error handling.
CC: stable@vger.kernel.org
Fixes: 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
0eb6ddfb865c tried to fix this up, but introduced a use-after-free
of dio. Additionally, we still had an issue with error handling,
as reported by Darrick:
"I noticed a regression in xfs/747 (an unreleased xfstest for the
xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down
to a simpler reproducer:
error-test: 0 209 linear 8:48 0
error-test: 209 1 error
error-test: 210 6446894 linear 8:48 210
Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO
for sector 209 and to pass the io to the scsi device everywhere else.
On 5.3-rc3, performing a directio pread of this range with a < 1M buffer
(in other words, a request for fewer than MAX_BIO_PAGES bytes) yields
EIO like you'd expect:
pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error)
pread: Input/output error
+++ exited with 0 +++
But doing it with a larger buffer succeeds(!):
pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880
read 1146880/1146880 bytes at offset 0
1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec)
+++ exited with 0 +++
(Note that the part of the buffer corresponding to the dm-error area is
uninitialized)
On 5.3-rc2, both commands would fail with EIO like you'd expect. The
only change between rc2 and rc3 is commit 0eb6ddfb865c ("block: Fix
__blkdev_direct_IO() for bio fragments").
AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets
split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB)
and a second one for the 96k after that."
Fix this by noting that it's always safe to dereference dio if we get
BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So
we can safely increment the dio size before calling submit_bio(), and
then decrement it on failure (not that it really matters, as the bio
and dio are going away).
For error handling, return to the original method of just using 'ret'
for tracking the error, and the size tracking in dio->size.
Fixes: 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments")
Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO")
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that the state recovery code handles ETIMEDOUT correctly,
and also that we set RPC_TASK_TIMEOUT when recovering open state.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Normally the range->len is set to default value (U64_MAX), but when it's
not default value, we should check if the range overflows.
And if it overflows, return -EINVAL before doing anything.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the 5.3 merge window, commit 7c7e301406d0a9 ("btrfs: sysfs: Replace
default_attrs in ktypes with groups"), we started using the member
"defaults_groups" for the kobject type "btrfs_raid_ktype". That leads
to a series of warnings when running some test cases of fstests, such
as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those
warnings are like the following:
[116648.059212] kernfs: can not remove 'total_bytes', no directory
[116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000
[116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001
[116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.077143] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.077852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.080585] Call Trace:
[116648.081262] remove_files+0x31/0x70
[116648.081929] sysfs_remove_group+0x38/0x80
[116648.082596] sysfs_remove_groups+0x34/0x70
[116648.083258] kobject_del+0x20/0x60
[116648.083933] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.084608] close_ctree+0x19a/0x380 [btrfs]
[116648.085278] generic_shutdown_super+0x6c/0x110
[116648.085951] kill_anon_super+0xe/0x30
[116648.086621] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.087289] deactivate_locked_super+0x3a/0x70
[116648.087956] cleanup_mnt+0xb4/0x160
[116648.088620] task_work_run+0x7e/0xc0
[116648.089285] exit_to_usermode_loop+0xfa/0x100
[116648.089933] do_syscall_64+0x1cb/0x220
[116648.090567] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.091197] RIP: 0033:0x7f9cdc073b37
(...)
[116648.100046] ---[ end trace 22e24db328ccadf8 ]---
[116648.100618] ------------[ cut here ]------------
[116648.101175] kernfs: can not remove 'used_bytes', no directory
[116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000
[116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001
[116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.113268] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.113939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.116649] Call Trace:
[116648.117326] remove_files+0x31/0x70
[116648.117997] sysfs_remove_group+0x38/0x80
[116648.118671] sysfs_remove_groups+0x34/0x70
[116648.119342] kobject_del+0x20/0x60
[116648.120022] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.120707] close_ctree+0x19a/0x380 [btrfs]
[116648.121396] generic_shutdown_super+0x6c/0x110
[116648.122057] kill_anon_super+0xe/0x30
[116648.122702] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.123335] deactivate_locked_super+0x3a/0x70
[116648.123961] cleanup_mnt+0xb4/0x160
[116648.124586] task_work_run+0x7e/0xc0
[116648.125210] exit_to_usermode_loop+0xfa/0x100
[116648.125830] do_syscall_64+0x1cb/0x220
[116648.126463] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.127080] RIP: 0033:0x7f9cdc073b37
(...)
[116648.135923] ---[ end trace 22e24db328ccadf9 ]---
These happen because, during the unmount path, we call kobject_del() for
raid kobjects that are not fully initialized, meaning that we set their
ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set
their parent kobject, which is done through btrfs_add_raid_kobjects().
We have this split raid kobject setup since commit 75cb379d263521
("btrfs: defer adding raid type kobject until after chunk relocation") in
order to avoid triggering reclaim during contextes where we can not
(either we are holding a transaction handle or some lock required by
the transaction commit path), so that we do the calls to kobject_add(),
which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects()
in contextes where it is safe to trigger reclaim. That change expected
that a new raid kobject can only be created either when mounting the
filesystem or after raid profile conversion through the relocation path.
However, we can have new raid kobject created in other two cases at least:
1) During device replace (or scrub) after adding a device a to the
filesystem. The replace procedure (and scrub) do calls to
btrfs_inc_block_group_ro() which can allocate a new block group
with a new raid profile (because we now have more devices). This
can be triggered by test cases btrfs/027 and btrfs/176.
2) During a degraded mount trough any write path. This can be triggered
by test case btrfs/124.
Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only
makes things more complex and fragile, can also introduce deadlocks with
reclaim the following way:
1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or
anywhere in the replace/scrub path will cause a deadlock with reclaim
because if reclaim happens and a transaction commit is triggered,
the transaction commit path will block at btrfs_scrub_pause().
2) During degraded mounts it is essentially impossible to figure out where
to add extra calls to btrfs_add_raid_kobjects(), because allocation of
a block group with a new raid profile can happen anywhere, which means
we can't safely figure out which contextes are safe for reclaim, as
we can either hold a transaction handle or some lock needed by the
transaction commit path.
So it is too complex and error prone to have this split setup of raid
kobjects. So fix the issue by consolidating the setup of the kobjects in a
single place, at link_block_group(), and setup a nofs context there in
order to prevent reclaim being triggered by the memory allocations done
through the call chain of kobject_add().
Besides fixing the sysfs warnings during kobject_del(), this also ensures
the sysfs directories for the new raid profiles end up created and visible
to users (a bug that existed before the 5.3 commit 7c7e301406d0a9
("btrfs: sysfs: Replace default_attrs in ktypes with groups")).
Fixes: 75cb379d263521 ("btrfs: defer adding raid type kobject until after chunk relocation")
Fixes: 7c7e301406d0a9 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
|
|
Fix kernel oops when mounting a encryptData CIFS share with
CONFIG_DEBUG_VIRTUAL
Signed-off-by: Sebastien Tisserant <stisserant@wallix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS). Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
When a reconnect happens in the middle of processing a compound chain
the code leaks a buffer from the memory pool. Fix this by properly
checking for a return code and freeing buffers in case of error.
Also maintain a buf variable to be equal to either smallbuf or bigbuf
depending on a response buffer size while parsing a chain and when
returning to the caller.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
|
|
Vivek:
"As of now dax_layout_busy_page() calls unmap_mapping_range() with last
argument as 1, which says even unmap cow pages. I am wondering who needs
to get rid of cow pages as well.
I noticed one interesting side affect of this. I mount xfs with -o dax and
mmaped a file with MAP_PRIVATE and wrote some data to a page which created
cow page. Then I called fallocate() on that file to zero a page of file.
fallocate() called dax_layout_busy_page() which unmapped cow pages as well
and then I tried to read back the data I wrote and what I get is old
data from persistent memory. I lost the data I had written. This
read basically resulted in new fault and read back the data from
persistent memory.
This sounds wrong. Are there any users which need to unmap cow pages
as well? If not, I am proposing changing it to not unmap cow pages.
I noticed this while while writing virtio_fs code where when I tried
to reclaim a memory range and that corrupted the executable and I
was running from virtio-fs and program got segment violation."
Dan:
"In fact the unmap_mapping_range() in this path is only to synchronize
against get_user_pages_fast() and force it to call back into the
filesystem to re-establish the mapping. COW pages should be left
untouched by dax_layout_busy_page()."
Cc: <stable@vger.kernel.org>
Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
The global change from force_sig caused module unloading of cifs.ko
to fail (since the cifsd process could not be killed, "rmmod cifs"
now would always fail)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
|
|
People are reporing seeing fscache errors being reported concerning
duplicate cookies even in cases where they are not setting up fscache
at all. The rule needs to be that if fscache is not enabled, then it
should have no side effects at all.
To ensure this is the case, we disable fscache completely on all superblocks
for which the 'fsc' mount option was not set. In order to avoid issues
with '-oremount', we also disable the ability to turn fscache on via
remount.
Fixes: f1fe29b4a02d ("NFS: Use i_writecount to control whether...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Steve Dickson <steved@redhat.com>
Cc: David Howells <dhowells@redhat.com>
|
|
If the user specifies an open mode of 3, then we don't have a NFSv4 state
attached to the context, and so we Oops when we try to dereference it.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.10: 991eedb1371dc: NFSv4: Only pass the...
Cc: stable@vger.kernel.org # v4.10+
|
|
John Hubbard reports seeing the following stack trace:
nfs4_do_reclaim
rcu_read_lock /* we are now in_atomic() and must not sleep */
nfs4_purge_state_owners
nfs4_free_state_owner
nfs4_destroy_seqid_counter
rpc_destroy_wait_queue
cancel_delayed_work_sync
__cancel_work_timer
__flush_work
start_flush_work
might_sleep:
(kernel/workqueue.c:2975: BUG)
The solution is to separate out the freeing of the state owners
from nfs4_purge_state_owners(), and perform that outside the atomic
context.
Reported-by: John Hubbard <jhubbard@nvidia.com>
Fixes: 0aaaf5c424c7f ("NFS: Cache state owners after files are closed")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Ensure that we always check the return value of update_open_stateid()
so that we can retry if the update of local state failed. This fixes
infinite looping on state recovery.
Fixes: e23008ec81ef3 ("NFSv4 reduce attribute requests for open reclaim")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v3.7+
|
|
Fix nfs_reap_expired_delegations() to ensure that we only reap delegations
that are actually expired, rather than triggering on random errors.
Fixes: 45870d6909d5a ("NFSv4.1: Test delegation stateids when server...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The logic for checking in nfs41_check_open_stateid() whether the state
is supported by a delegation is inverted. In addition, it makes more
sense to perform that check before we check for expired locks.
Fixes: 8a64c4ef106d1 ("NFSv4.1: Even if the stateid is OK,...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
In pnfs_update_layout() ensure that we do report any fatal errors from
nfs4_select_rw_stateid().
Fixes: d9aba2b40de6 ("NFSv4: Don't use the zero stateid with layoutget")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If the server returns with EAGAIN when we're trying to recover from
a server reboot, we currently delay for 1 second, but then mark the
stateid as needing recovery after the grace period has expired.
Instead, we should just retry the same recovery process immediately
after the 1 second delay. Break out of the loop after 10 retries.
Fixes: 35a61606a612 ("NFS: Reduce indentation of the switch statement...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When error recovery fails due to a fatal error on the server, ensure
we log it in the syslog.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
