summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-12skip LAYOUTRETURN if layout is invalidOlga Kornievskaia
Currently, when IO to DS fails, client returns the layout and retries against the MDS. However, then on umounting (inode eviction) it returns the layout again. This is because pnfs_return_layout() was changed in commit d78471d32bb6 ("pnfs/blocklayout: set PNFS_LAYOUTRETURN_ON_ERROR") to always set NFS_LAYOUT_RETURN_REQUESTED so even if we returned the layout, it will be returned again. Instead, let's also check if we have already marked the layout invalid. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-09NFSv4.1: Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRYTrond Myklebust
If the server returns NFS4ERR_SEQ_FALSE_RETRY or NFS4ERR_RETRY_UNCACHED_REP, then it thinks we're trying to replay an existing request. If so, then let's just bump the sequence ID and retry the operation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-09NFSv4: Fix a typo in nfs41_sequence_processTrond Myklebust
We want to compare the slot_id to the highest slot number advertised by the server. Fixes: 3be0f80b5fe9c ("NFSv4.1: Fix up replays of interrupted requests") Cc: stable@vger.kernel.org # 4.15+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-09NFSv4: Revert commit 5f83d86cf531d ("NFSv4.x: Fix wraparound issues..")Trond Myklebust
The correct behaviour for NFSv4 sequence IDs is to wrap around to the value 0 after 0xffffffff. See https://tools.ietf.org/html/rfc5661#section-2.10.6.1 Fixes: 5f83d86cf531d ("NFSv4.x: Fix wraparound issues when validing...") Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-08NFSv4: Return NFS4ERR_DELAY when a layout recall fails due to igrab()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-08NFSv4: Return NFS4ERR_DELAY when a delegation recall fails due to igrab()Trond Myklebust
If the attempt to recall the delegation fails because the inode is in the process of being evicted from cache, then use NFS4ERR_DELAY to ask the server to retry later. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-06NFSv4.0: Remove transport protocol name from non-UCS client IDChuck Lever
Commit 69dd716c5ffd ("NFSv4: Add socket proto argument to setclientid") (2007) added the transport protocol name to the client ID string, but the patch description doesn't explain why this was necessary. At that time, the only transport protocol name that would have been used is "tcp" (for both IPv4 and IPv6), resulting in no additional distinctiveness of the client ID string. Since there is one client instance, the server should recognize it's state whether the client is connecting via TCP or RDMA. Same client, same lease. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-06NFSv4.0: Remove cl_ipaddr from non-UCS client IDChuck Lever
It is possible for two distinct clients to have the same cl_ipaddr: - if the client admin disables callback with clientaddr=0.0.0.0 on more than one client - if two clients behind separate NATs use the same private subnet number - if the client admin specifies the same address via clientaddr= mount option (pointing the server at the same NAT box, for example) Because of the way the Linux NFSv4.0 client constructs its client ID string by default, such clients could interfere with each others' lease state when mounting the same server: scnprintf(str, len, "Linux NFSv4.0 %s/%s %s", clp->cl_ipaddr, rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR), rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_PROTO)); cl_ipaddr is set to the value of the clientaddr= mount option. Two clients whose addresses are 192.168.3.77 that mount the same server (whose public IP address is, say, 3.4.5.6) would both generate the same client ID string when sending a SETCLIENTID: Linux NFSv4.0 192.168.3.77/3.4.5.6 tcp and thus the server would not be able to distinguish the clients' leases. If both clients are using AUTH_SYS when sending SETCLIENTID then the server could possibly permit the two clients to interfere with or purge each others' leases. To better ensure that Linux's NFSv4.0 client ID strings are distinct in these cases, remove cl_ipaddr from the client ID string and replace it with something more likely to be unique. Note that the replacement looks a lot like the uniform client ID string. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-05pstore: Convert internal records to timespec64Kees Cook
This prepares pstore for converting the VFS layer to timespec64. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
2018-06-05NFSv4: Fix a compiler warning when CONFIG_NFS_V4_1 is undefinedTrond Myklebust
Fix a compiler warning: fs/nfs/nfs4proc.c:910:13: warning: 'nfs4_layoutget_release' defined but not used [-Wunused-function] static void nfs4_layoutget_release(void *calldata) ^~~~~~~~~~~~~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: Filter cache invalidation when holding a delegationTrond Myklebust
If the client holds a delegation, then ensure we filter out attempts to invalidate the size, owner, group owner, or mode unless we made the change, in which case, check that NFS_INO_REVAL_FORCED is set by the caller. Always filter out attempts to invalidate the change attribute and size, since we are authoritative for those. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: Ignore NFS_INO_REVAL_FORCED in nfs_check_inode_attributes()Trond Myklebust
If we hold a delegation, we should not need to call nfs_check_inode_attributes() since we already know which attributes are valid, and which ones may still need revalidation. The state of the NFS_INO_REVAL_FORCED flag is therefore irrelevant. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: Improve caching while holding a delegationTrond Myklebust
Make sure that the client completely ignores change attribute and size changes on the server when it holds a delegation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: Fix attribute revalidationTrond Myklebust
Don't mark attributes as invalid just because they have changed. Instead, for the purposes of adjusting the attribute cache timeout, keep a separate variable that tracks whether or not a change occurred. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: fix up nfs_setattr_update_inodeTrond Myklebust
Always try to set the attributes, even if we don't have a valid struct nfs_fattr. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFSv4: Ensure the inode is clean when we set a delegationTrond Myklebust
If there are attributes that are still invalid when we set a delegation, then we need to set the NFS_INO_REVAL_FORCED flag. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFSv4: Ignore NFS_INO_REVAL_FORCED in nfs4_proc_accessTrond Myklebust
If we hold a delegation, we don't need to care about whether or not the inode attributes are up to date. We know we can cache the results of this call regardless. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFSv4: Don't ask for delegated attributes when adding a hard linkTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFSv4: Don't ask for delegated attributes when revalidating the inodeTrond Myklebust
Again, when revalidating the inode, we don't need to ask for attributes for which we are authoritative. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFS: Pass the inode down to the getattr() callbackTrond Myklebust
Allow the getattr() callback to check things like whether or not we hold a delegation so that it can adjust the attributes that it is asking for. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-04NFSv4: Don't request size+change attribute if they are delegated to usTrond Myklebust
When we hold a delegation, we should not need to request attributes such as the file size or the change attribute. For some servers, avoiding asking for these unneeded attributes can improve the overall system performance. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Don't release the sequence slot until we've processed layoutget on openTrond Myklebust
If the server recalls the layout that was just handed out, we risk hitting a race as described in RFC5661 Section 2.10.6.3 unless we ensure that we release the sequence slot after processing the LAYOUTGET operation that was sent as part of the OPEN compound. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Don't call commit on failed layoutget-on-openTrond Myklebust
If the layoutget on open call failed, we can't really commit the inode, so don't bother calling it. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pNFS: Don't send LAYOUTGET on OPEN for read, if we already have cached dataTrond Myklebust
If we're only opening the file for reading, and the file is empty and/or we already have cached data, then heuristically optimise away the LAYOUTGET. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFSv4/pnfs: Don't switch off layoutget-on-open for transient errorsTrond Myklebust
Ensure that we only switch off the LAYOUTGET operation in the OPEN compound when the server is truly broken, and/or it is complaining that the compound is too large. Currently, we end up turning off the functionality permanently, even for transient errors such as EACCES or ENOSPC. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFSv4/pnfs: Ensure pnfs_parse_lgopen() won't try to parse uninitialised dataTrond Myklebust
We need to ensure that pnfs_parse_lgopen() doesn't try to parse a struct nfs4_layoutget_res that was not filled by a successful call to decode_layoutget(). This can happen if we performed a cached open, or if either the OP_ACCESS or OP_GETATTR operations preceding the OP_LAYOUTGET in the compound returned an error. By initialising the 'status' field to NFS4ERR_DELAY, we ensure that pnfs_parse_lgopen() won't try to interpret the structure. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Fix manipulation of NFS_LAYOUT_FIRST_LAYOUTGETFred Isaman
The flag was not always being cleared after LAYOUTGET on OPEN. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add barrier to prevent lgopen using LAYOUTGET during recallFred Isaman
Since the LAYOUTGET on OPEN can be sent without prior inode information, existing methods to prevent LAYOUTGET from being sent while processing CB_LAYOUTRECALL don't work. Track if a recall occurred while LAYOUTGET was being sent, and if so ignore the results. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Stop attempting LAYOUTGET on OPEN on failureFred Isaman
Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add LAYOUTGET to OPEN of an existing fileFred Isaman
Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pNFS: Refactor nfs4_layoutget_release()Trond Myklebust
Move the actual freeing of the struct nfs4_layoutget into fs/nfs/pnfs.c where it can be reused by the layoutget on open code. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add LAYOUTGET to OPEN of a new fileFred Isaman
This triggers when have no pre-existing inode to attach to. The preexisting case is saved for later. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Change pnfs_alloc_init_layoutget_args call signatureFred Isaman
Don't send in a layout, instead use the (possibly NULL) inode. This is needed for LAYOUTGET attached to an OPEN where the inode is not yet set. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Move nfs4_opendata into nfs4_fs.hFred Isaman
It will be needed now by the pnfs code. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add conditional encode/decode of LAYOUTGET within OPEN compoundFred Isaman
Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: move allocations out of nfs4_proc_layoutgetFred Isaman
They work better in the new alloc_init function. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: refactor send_layoutgetFred Isaman
Pull out the alloc/init part for eventual reuse by OPEN. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Add layout driver flag PNFS_LAYOUTGET_ON_OPENFred Isaman
Driver can set flag to allow LAYOUTGET to be sent with OPEN. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFS4: move ctx into nfs4_run_open_taskFred Isaman
Preparing to add conditional LAYOUTGET to OPEN rpc, the LAYOUTGET will need the ctx info. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Store return value of decode_layoutget for later processingFred Isaman
This will be needed to seperate return value of OPEN and LAYOUTGET when they are combined into a single RPC. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31pnfs: Remove redundant assignment from nfs4_proc_layoutget().Fred Isaman
nfs_init_sequence() will clear this for us. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFSv4: Don't add a new lock on an interrupted wait for LOCKBenjamin Coddington
If the wait for a LOCK operation is interrupted, and then the file is closed, the locks cleanup code will assume that no new locks will be added to the inode after it has completed. We already have a mechanism to detect if there was signal, so let's use that to avoid recreating the local lock once the RPC completes. Also skip re-sending the LOCK operation for the various error cases if we were signaled. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> [Trond: Fix inverted test of locks_lock_inode_wait()] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFSv4: Always clear the pNFS layout when handling ESTALETrond Myklebust
If we get an ESTALE error in response to an RPC call operating on the file on the MDS, we should immediately cancel the layout for that file. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFSv4: Fix possible 1-byte stack overflow in nfs_idmap_read_and_verify_messageDave Wysochanski
In nfs_idmap_read_and_verify_message there is an incorrect sprintf '%d' that converts the __u32 'im_id' from struct idmap_msg to 'id_str', which is a stack char array variable of length NFS_UINT_MAXLEN == 11. If a uid or gid value is > 2147483647 = 0x7fffffff, the conversion overflows into a negative value, for example: crash> p (unsigned) (0x80000000) $1 = 2147483648 crash> p (signed) (0x80000000) $2 = -2147483648 The '-' sign is written to the buffer and this causes a 1 byte overflow when the NULL byte is written, which corrupts kernel stack memory. If CONFIG_CC_STACKPROTECTOR_STRONG is set we see a stack-protector panic: [11558053.616565] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa05b8a8c [11558053.639063] CPU: 6 PID: 9423 Comm: rpc.idmapd Tainted: G W ------------ T 3.10.0-514.el7.x86_64 #1 [11558053.641990] Hardware name: Red Hat OpenStack Compute, BIOS 1.10.2-3.el7_4.1 04/01/2014 [11558053.644462] ffffffff818c7bc0 00000000b1f3aec1 ffff880de0f9bd48 ffffffff81685eac [11558053.646430] ffff880de0f9bdc8 ffffffff8167f2b3 ffffffff00000010 ffff880de0f9bdd8 [11558053.648313] ffff880de0f9bd78 00000000b1f3aec1 ffffffff811dcb03 ffffffffa05b8a8c [11558053.650107] Call Trace: [11558053.651347] [<ffffffff81685eac>] dump_stack+0x19/0x1b [11558053.653013] [<ffffffff8167f2b3>] panic+0xe3/0x1f2 [11558053.666240] [<ffffffff811dcb03>] ? kfree+0x103/0x140 [11558053.682589] [<ffffffffa05b8a8c>] ? idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.689710] [<ffffffff810855db>] __stack_chk_fail+0x1b/0x30 [11558053.691619] [<ffffffffa05b8a8c>] idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.693867] [<ffffffffa00209d6>] rpc_pipe_write+0x56/0x70 [sunrpc] [11558053.695763] [<ffffffff811fe12d>] vfs_write+0xbd/0x1e0 [11558053.702236] [<ffffffff810acccc>] ? task_work_run+0xac/0xe0 [11558053.704215] [<ffffffff811fec4f>] SyS_write+0x7f/0xe0 [11558053.709674] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Fix this by calling the internally defined nfs_map_numeric_to_string() function which properly uses '%u' to convert this __u32. For consistency, also replace the one other place where snprintf is called. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Reported-by: Stephen Johnston <sjohnsto@redhat.com> Fixes: cf4ab538f1516 ("NFSv4: Fix the string length returned by the idmapper") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFS: Fix up nfs_post_op_update_inode() to force ctime updatesTrond Myklebust
We do not want to ignore ctime updates that originate from functions such as link(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFS: Ensure we revalidate the inode correctly after setaclTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFS: Ensure we revalidate the inode correctly after remove or renameTrond Myklebust
We may need to revalidate the change attribute, ctime and the nlinks count. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-05-31NFS: Set the force revalidate flag if the inode is not completely initialisedTrond Myklebust
Ensure that a delegation doesn't cause us to skip initialising the inode if it was incomplete when we exited nfs_fhget() Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 18:08:27 +0000