| Age | Commit message (Collapse) | Author |
|---|
|
Add a new macro, XFS_IS_CORRUPT, which we will use to integrate some
corruption reporting when the corruption test expression is true. This
will be used in the next patch to remove the ugly XFS_WANT_CORRUPT*
macros.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Make sure we attach dquots to both inodes before swapping their extents.
This was found via manual code inspection by looking for places where we
could call xfs_trans_mod_dquot without dquots attached to inodes, and
confirmed by instrumenting the kernel and running xfs/328.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In xfs_iomap_write_unwritten, we need to ensure that dquots are attached
to the inode and quota blocks reserved so that we capture in the quota
counters any blocks allocated to handle a bmbt split. This can happen
on the first unwritten extent conversion to a preallocated sparse file
on a fresh mount.
This was found by running generic/311 with quotas enabled. The bug
seems to have been introduced in "[XFS] rework iocore infrastructure,
remove some code and make it more" from ~2002?
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Coverity points out that xfs_btree_islastblock doesn't check the return
value of xfs_btree_check_block. Since the question "Does the cursor
point to the last block in this level?" only makes sense if the caller
previously performed a lookup or seek operation, the block should
already have been checked.
Therefore, check the return value in an ASSERT and turn the whole thing
into a static inline predicate.
Coverity-id: 114069
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the code for extracting the incore header to the only caller that
didn't already do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is no real need for xfs_dir2_data_freescan wrapper, so rename
xfs_dir2_data_freescan_int to xfs_dir2_data_freescan and let the
callers dereference the mount pointer from the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->data_get_ftype and ->data_put_ftype dir ops methods with
directly called xfs_dir2_data_get_ftype and xfs_dir2_data_put_ftype
helpers that takes care of the differences between the directory format
with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->data_bestfree_p dir ops method with a directly called
xfs_dir2_data_bestfree_p helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Remove the XFS_DIR2_DATA_ENTSIZE and XFS_DIR3_DATA_ENTSIZE and open
code them in their only caller, which now becomes so simple that
we can turn it into an inline function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the data block fixed offsets towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->data_entry_tag_p dir ops method with a directly called
xfs_dir2_data_entry_tag_p helper that takes care of the differences
between the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->data_entsize dir ops method with a directly called
xfs_dir2_data_entsize helper that takes care of the differences between
the directory format with and without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All the callers really want an offset into the buffer, so adopt
the helper to return that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Now that all users use the data_entry_offset field this method is
unused and can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use an offset as the main means for iteration, and only do pointer
arithmetics to find the data/unused entries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the two users of the ->data_unused_p dir ops method with a
direct calculation using ->data_entry_offset, and clean them up a bit.
xfs_dir2_sf_to_block already had an offset variable containing the
value of ->data_entry_offset, which we are now reusing to make it
clear that the initial freespace entry is at the same place that
we later fill in the 1 entry, and in xfs_dir3_data_init the function
is cleaned up a bit to keep the initialization of fields of a given
structure close to each other, and to avoid a local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The only user of the ->data_dot_entry_p and ->data_dotdot_entry_p
methods is the xfs_dir2_sf_to_block function that builds block format
directorys from a short form directory. It already uses pointer
arithmetics with a offset variable to do so for the real entries in
the directory, so switch the generation of the . and .. entries to
the same scheme, and clean up some of the later pointer arithmetics
to use bp->b_addr directly as well and avoid some casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The data_dotdot_offset value is always equal to data_entry_offset plus
the fixed size of the "." entry. Right now calculating that fixed size
requires an indirect call, but by the end of this series it will be
an inline function that can be constant folded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The data_dot_offset value is always equal to data_entry_offset given
that "." is always the first entry in the directory.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->sf_get_ftype and ->sf_put_ftype dir ops methods with
directly called xfs_dir2_sf_get_ftype and xfs_dir2_sf_put_ftype helpers
that takes care of the differences between the directory format with and
without the file type field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->sf_get_ino and ->sf_put_ino dir ops methods with directly
called xfs_dir2_sf_get_ino and xfs_dir2_sf_put_ino helpers that take care
of the difference between the directory format with and without the file
type field. Also move xfs_dir2_sf_get_parent_ino and
xfs_dir2_sf_put_parent_ino to xfs_dir2_sf.c with the rest of the
low-level short form entry handling and use XFS_MAXINUMBER istead of
opencoded constants.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Just check for file-type enabled directories directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The parent inode handling is the same for all directory format variants,
just use direct calls instead of going through a pointless indirect
call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Now that the max bests value is in struct xfs_da_geometry both instances
of ->db_to_fdb and ->db_to_fdindex are identical. Replace them with
local xfs_dir2_db_to_fdb and xfs_dir2_db_to_fdindex functions in
xfs_dir2_node.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the max free bests count towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the free header size towards our structure for dir/attr geometry
parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All but two callers of the ->free_bests_p dir operation already have a
struct xfs_dir3_icfree_hdr from a previous call to
xfs_dir2_free_hdr_from_disk at hand. Add a pointer to the bests to
struct xfs_dir3_icfree_hdr to clean up this pattern. To optimize this
pattern, pass the struct xfs_dir3_icfree_hdr to xfs_dir2_free_log_bests
instead of recalculating the pointer there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Return the xfs_dir3_icfree_hdr used by the helpers called from
xfs_dir2_node_addname_int to the main function to prepare for the
next round of changes where we'll use the ichdr in xfs_dir3_icfree_hdr
to avoid extra operations to find the bests pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->free_hdr_to_disk dir ops method with a directly called
xfs_dir2_free_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->free_hdr_from_disk dir ops method with a directly called
xfs_dir_free_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the max leaf entries count towards our structure for dir/attr
geometry parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the leaf header size towards our structure for dir/attr geometry
parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All callers of the ->node_tree_p dir operation already have a struct
xfs_dir3_icleaf_hdr from a previous call to xfs_da_leaf_hdr_from_disk at
hand, or just need slight changes to the calling conventions to do so.
Add a pointer to the entries to struct xfs_dir3_icleaf_hdr to clean up
this pattern. To make this possible the xfs_dir3_leaf_log_ents function
grow a new argument to pass the xfs_dir3_icleaf_hdr that call callers
already have, and xfs_dir2_leaf_lookup_int returns the
xfs_dir3_icleaf_hdr to the callers so that they can later use it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->leaf_hdr_to_disk dir ops method with a directly called
xfs_dir_leaf_hdr_to_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->leaf_hdr_from_disk dir ops method with a directly called
xfs_dir2_leaf_hdr_from_disk helper that takes care of the differences
between the v4 and v5 on-disk format.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the node header size field to struct xfs_da_geometry, and remove
the now unused non-directory dir ops infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
All but two callers of the ->node_tree_p dir operation already have a
xfs_da3_icnode_hdr from a previous call to xfs_da3_node_hdr_from_disk at
hand. Add a pointer to the btree entries to struct xfs_da3_icnode_hdr
to clean up this pattern. The two remaining callers now expand the
whole header as well, but that isn't very expensive and not in a super
hot path anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->node_hdr_to_disk dir ops method with a directly called
xfs_da_node_hdr_to_disk helper that takes care of the v4 vs v5
difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the ->node_hdr_from_disk dir ops method with a directly called
xfs_da_node_hdr_from_disk helper that takes care of the v4 vs v5
difference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Break up xchk_da_btree_entry and handle looking up leaf node entries
in the attr / dir callbacks, so that only the generic node handling
is left in the common core code. Note that the checks for the crc
enabled blocks are removed, as the scrubbing code already remaps the
magic numbers earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
None of these can ever be negative, so use unsigned types.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the abstract in-memory version of various btree block headers
out of xfs_da_format.h as they aren't on-disk formats.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
