| Age | Commit message (Collapse) | Author |
|---|
|
Enable idmapped mounts for xfs. This basically just means passing down
the user_namespace argument from the VFS methods down to where it is
passed to the relevant helpers.
Note that full-filesystem bulkstat is not supported from inside idmapped
mounts as it is an administrative operation that acts on the whole file
system. The limitation is not applied to the bulkstat single operation
that just operates on a single inode.
Link: https://lore.kernel.org/r/20210121131959.646623-40-christian.brauner@ubuntu.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
So xfs_ialloc() will only address in-core inode allocation then,
Also, rename xfs_ialloc() to xfs_dir_ialloc_init() in order to
keep everything in xfs_inode.c under the same namespace.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit
counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the
32-bit unix time epoch). This enables us to handle dates up to 2486,
which solves the y2038 problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
With the recent rework of the inode cluster flushing, we no longer
ever wait on the the inode flush "lock". It was never a lock in the
first place, just a completion to allow callers to wait for inode IO
to complete. We now never wait for flush completion as all inode
flushing is non-blocking. Hence we can get rid of all the iflock
infrastructure and instead just set and check a state flag.
Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the
xfs_iflock_nowait() test-and-set operations on that flag, and
replace all the xfs_ifunlock() calls to clear operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.
We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.
We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....
We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.
This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.
This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.
Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move the double-inode locking helpers to xfs_inode.c since they're not
specific to reflink.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Pull DAX updates part two from Darrick Wong:
"This time around, we're hoisting the DONTCACHE flag from XFS into the
VFS so that we can make the incore DAX mode changes become effective
sooner.
We can't change the file data access mode on a live inode because we
don't have a safe way to change the file ops pointers. The incore
state change becomes effective at inode loading time, which can happen
if the inode is evicted. Therefore, we're making it so that
filesystems can ask the VFS to evict the inode as soon as the last
holder drops.
The per-fs changes to make this call this will be in subsequent pull
requests from Ted and myself.
Summary:
- Introduce DONTCACHE flags for dentries and inodes. This hint will
cause the VFS to drop the associated objects immediately after the
last put, so that we can change the file access mode (DAX or page
cache) on the fly"
* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: Introduce DCACHE_DONTCACHE
fs: Lift XFS_IDONTCACHE to the VFS layer
|
|
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
DAX effective mode (S_DAX) changes requires inode eviction.
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add a new xfs_inode_buftarg helper that gets the data I/O buftarg for a
given inode. Replace the existing xfs_find_bdev_for_inode and
xfs_find_daxdev_for_inode helpers with this new general one and cleanup
some of the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Widen the incore inode's i_delayed_blks counter to be a 64-bit integer.
This is necessary to fix an integer overflow problem that can be
reproduced easily now that we use the counter to track blocks that are
assigned to the inode in memory but not on disk. This includes actual
delalloc reservations as well as real extents in the COW fork that
are waiting to be remapped into the data fork.
These 'delayed mapping' blocks can easily exceed 2^32 blocks if one
creates a very large sparse file of size approximately 2^33 bytes with
one byte written every 2^23 bytes, sets a very large COW extent size
hint of 2^23 blocks, reflinks the first file into a second file, and
then writes a single byte every 2^23 blocks in the original file.
When this happens, we'll try to create approximately 1024 2^23 extent
reservations in the COW fork, which will overflow the counter and cause
problems.
Note that on x64 we end up filling a 4-byte gap in the structure so this
doesn't increase the incore size.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When scheduling writeback of dirty file data in the page cache, XFS uses
IO completion workqueue items to ensure that filesystem metadata only
updates after the write completes successfully. This is essential for
converting unwritten extents to real extents at the right time and
performing COW remappings.
Unfortunately, XFS queues each IO completion work item to an unbounded
workqueue, which means that the kernel can spawn dozens of threads to
try to handle the items quickly. These threads need to take the ILOCK
to update file metadata, which results in heavy ILOCK contention if a
large number of the work items target a single file, which is
inefficient.
Worse yet, the writeback completion threads get stuck waiting for the
ILOCK while holding transaction reservations, which can use up all
available log reservation space. When that happens, metadata updates to
other parts of the filesystem grind to a halt, even if the filesystem
could otherwise have handled it.
Even worse, if one of the things grinding to a halt happens to be a
thread in the middle of a defer-ops finish holding the same ILOCK and
trying to obtain more log reservation having exhausted the permanent
reservation, we now have an ABBA deadlock - writeback completion has a
transaction reserved and wants the ILOCK, and someone else has the ILOCK
and wants a transaction reservation.
Therefore, we create a per-inode writeback io completion queue + work
item. When writeback finishes, it can add the ioend to the per-inode
queue and let the single worker item process that queue. This
dramatically cuts down on the number of kworkers and ILOCK contention in
the system, and seems to have eliminated an occasional deadlock I was
seeing while running generic/476.
Testing with a program that simulates a heavy random-write workload to a
single file demonstrates that the number of kworkers drops from
approximately 120 threads per file to 1, without dramatically changing
write bandwidth or pagecache access latency.
Note that we leave the xfs-conv workqueue's max_active alone because we
still want to be able to run ioend processing for as many inodes as the
system can handle.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Add the necessary in-core metadata fields to keep track of which parts
of the filesystem have been observed and which parts were observed to be
unhealthy, and print a warning at unmount time if we have unfixed
problems.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Use a rhashtable to cache the unlinked list incore. This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.
The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records. This makes finding the
inode X that points to a inode Y very quick. If our cache fails to find
anything we can always fall back on the old method.
FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list. I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists. With the
ptach, I see:
+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s
real 0m12.192s
user 0m0.064s
sys 0m11.619s
+ cd /
+ umount /mnt
real 0m0.050s
user 0m0.004s
sys 0m0.030s
And without the patch:
+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s
real 12m38.853s
user 0m0.084s
sys 12m34.470s
+ cd /
+ umount /mnt
real 0m0.086s
user 0m0.000s
sys 0m0.060s
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
struct xfs_defer_ops has now been reduced to a single list_head. The
external dfops mechanism is unused and thus everywhere a (permanent)
transaction is accessible the associated dfops structure is as well.
Remove the xfs_defer_ops structure and fold the list_head into the
transaction. Also remove the last remnant of external dfops in
xfs_trans_dup().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We have a few places that already check if an inode has actual data in
the COW fork to avoid work on reflink inodes that do not actually have
outstanding COW blocks. There are a few more places that can avoid
working if doing the same check, so add a documented helper for this
condition and use it in all places where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We only have a few more callers left, so seize the opportunity and kill
it off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Nobody uses this macro, get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
|
|
The inode free callchain starting in xfs_inactive_ifree() already
associates its dfops with the transaction. It still passes the dfops
on the stack down through xfs_difree_inobt(), however.
Clean up the call stack and reference dfops directly from the
transaction. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull more xfs updates from Darrick Wong:
"Here's the second round of patches for XFS for 4.18. Most of the
commits are small cleanups, bug fixes, and continued strengthening of
metadata verifiers; the bulk of the diff is the conversion of the
fs/xfs/ tree to use SPDX tags.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen metadata checking to avoid ASSERTing on bad disk
contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes"
* tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
xfs: update incore per-AG inode count
xfs: replace do_mod with native operations
xfs: don't call xfs_da_shrink_inode with NULL bp
xfs: clean up MIN/MAX
xfs: move various type verifiers to common file
xfs: xfs_reflink_convert_cow() memory allocation deadlock
xfs: setup VFS i_rwsem lockdep state correctly
xfs: fix string handling in label get/set functions
xfs: convert to SPDX license tags
xfs: validate btree records on retrieval
xfs: push corruption -> ESTALE conversion to xfs_nfs_get_inode()
xfs: verify root inode more thoroughly
xfs: verify COW extent size hint is valid in inode verifier
xfs: verify extent size hint is valid in inode verifier
xfs: catch bad stripe alignment configurations
iomap: fsync swap files before iterating mappings
xfs: use xfs_trans_getsb in xfs_sync_sb_buf
xfs: don't assert on corrupted unlinked inode list
xfs: explicitly pass buffer size to xfs_corruption_error
xfs: don't assert when on-disk btree pointers are garbage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
|
|
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When xfs is operating as the back-end of a pNFS block server, it
prevents collisions between local and remote operations by requiring a
lease to be held for remotely accessed blocks. Local filesystem
operations break those leases before writing or mutating the extent map
of the file.
A similar mechanism is needed to prevent operations on pinned dax
mappings, like device-DMA, from colliding with extent unmap operations.
BREAK_WRITE and BREAK_UNMAP are introduced as two distinct levels of
layout breaking.
Layouts are broken in the BREAK_WRITE case to ensure that layout-holders
do not collide with local writes. Additionally, layouts are broken in
the BREAK_UNMAP case to make sure the layout-holder has a consistent
view of the file's extent map. While BREAK_WRITE breaks can be satisfied
be recalling FL_LAYOUT leases, BREAK_UNMAP breaks additionally require
waiting for busy dax-pages to go idle while holding XFS_MMAPLOCK_EXCL.
After this refactoring xfs_break_layouts() becomes the entry point for
coordinating both types of breaks. Finally, xfs_break_leased_layouts()
becomes just the BREAK_WRITE handler.
Note that the unlock tracking is needed in a follow on change. That will
coordinate retrying either break handler until both successfully test
for a lease break while maintaining the lock state.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The changes to skip discards of speculative preallocation and
unwritten extents introduced several new wrapper functions through
the bunmapi -> extent free codepath to reduce churn in all of the
associated callers. In several cases, these wrappers simply toggle a
single flag to skip or not skip discards for the resulting blocks.
The explicit _nodiscard() wrappers for such an isolated set of
callers is a bit overkill. Kill off these wrappers and replace with
the calls to the underlying functions in the contexts that need to
control discard behavior. Retain the wrappers that preserve the
original calling conventions to serve the original purpose of
reducing code churn.
This is a refactoring patch and does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We've had reports of online discard operations being sent from XFS
on write-only workloads. These discards occur as a result of
eofblocks trims that can occur after a large file copy completes.
These discards are slightly confusing for users who might be paying
close attention to online discards (i.e., vdo) due to performance
sensitivity. They also happen to be spurious because freed post-eof
blocks by definition have not been written to during the current
allocation cycle.
Update xfs_free_eofblocks() to skip discards that are purely
attributed to eofblocks trims. This cuts down the number of spurious
discards that may occur on write-only workloads due to normal
preallocation activity.
Note that discards of post-eof extents can still occur from other
codepaths that do not isolate handling of post-eof blocks from those
within eof. For example, file unlinks and truncates may still cause
discards for any file blocks affected by the operation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_dir_ialloc() rolls the current transaction when allocation of a new
inode required the space manager to perform an allocation and replinish
the Inode btree.
None of the callers of xfs_dir_ialloc() need to know if the
transaction was committed. Hence this commit removes the "committed"
argument of xfs_dir_ialloc.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This helper doesn't add any real value over just calling iomap_zero_range
directly, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Refactor xfs_lock_two_inodes to take separate locking modes for each
inode. Specifically, this enables us to take a SHARED lock on one inode
and an EXCL lock on the other. The lock class (MMAPLOCK/ILOCK) must be
the same for each inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Replace the current haphazard dir2 shortform verifier callsites with a
centralized verifier function that can be called either with the default
verifier functions or with a custom set. This helps us strengthen
integrity checking while providing us with flexibility for repair tools.
xfs_repair wants this to be able to supply its own verifier functions
when trying to fix possibly corrupt metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The EOFBLOCKS/COWBLOCKS tags are totally separate things, so track them
with separate i_flags. Right now we're abusing IEOFBLOCKS for both,
which is totally bogus because we won't tag the inode with COWBLOCKS if
IEOFBLOCKS was set by a previous tagging of the inode with EOFBLOCKS.
Found by wiring up clonerange to fsstress in xfs/017.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we create a new file we will need an inode, and usually some metadata
in the parent direction. Aiming for everything to go well despite the
lack of a reservation leads to dirty transactions cancelled under a heavy
create/delete load. This patch removes those nospace transactions, which
will lead to slightly earlier ENOSPC on some workloads, but instead
prevent file system shutdowns due to cancelling dirty transactions for
others.
A customer could observe assertations failures and shutdowns due to
cancelation of dirty transactions during heavy NFS workloads as shown
below:
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728125] XFS: Assertion failed: error != -ENOSPC, file: fs/xfs/xfs_inode.c, line: 1262
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728222] Call Trace:
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728246] [<ffffffff81795daf>] dump_stack+0x63/0x81
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728262] [<ffffffff810a1a5a>] warn_slowpath_common+0x8a/0xc0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728264] [<ffffffff810a1b8a>] warn_slowpath_null+0x1a/0x20
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728285] [<ffffffffa01bf403>] asswarn+0x33/0x40 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728308] [<ffffffffa01bb07e>] xfs_create+0x7be/0x7d0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728329] [<ffffffffa01b6ffb>] xfs_generic_create+0x1fb/0x2e0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728348] [<ffffffffa01b7114>] xfs_vn_mknod+0x14/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728366] [<ffffffffa01b7153>] xfs_vn_create+0x13/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728380] [<ffffffff81231de5>] vfs_create+0xd5/0x140
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728390] [<ffffffffa045ddb9>] do_nfsd_create+0x499/0x610 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728396] [<ffffffffa0465fa5>] nfsd3_proc_create+0x135/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728401] [<ffffffffa04561e3>] nfsd_dispatch+0xc3/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728416] [<ffffffffa03bfa43>] svc_process_common+0x453/0x6f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728423] [<ffffffffa03bfdf3>] svc_process+0x113/0x1f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728427] [<ffffffffa0455bcf>] nfsd+0x10f/0x180 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728432] [<ffffffffa0455ac0>] ? nfsd_destroy+0x80/0x80 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728438] [<ffffffff810c0d58>] kthread+0xd8/0xf0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728441] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728451] [<ffffffff8179d962>] ret_from_fork+0x42/0x70
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728453] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728454] ---[ end trace f9822c842fec81d4 ]---
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728477] XFS (sdb): Internal error xfs_trans_cancel at line 983 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x4ee/0x7d0 [xfs]
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728684] XFS (sdb): Corruption of in-memory data detected. Shutting down filesystem
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728685] XFS (sdb): Please umount the filesystem and rectify the problem(s)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We can simply use the i_rdev field in the Linux inode and just convert
to and from the XFS dev_t when reading or logging/writing the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Switch to the iomap_seek_hole and iomap_seek_data helpers for
implementing lseek SEEK_HOLE / SEEK_DATA, and remove all the
code that isn't needed any more.
Based on patches from Andreas Gruenbacher <agruenba@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This is a purely mechanical patch that removes the private
__{u,}int{8,16,32,64}_t typedefs in favor of using the system
{u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform
the transformation and fix the resulting whitespace and indentation
errors:
s/typedef\t__uint8_t/typedef __uint8_t\t/g
s/typedef\t__uint/typedef __uint/g
s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g
s/__uint8_t\t/__uint8_t\t\t/g
s/__uint/uint/g
s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g
s/__int/int/g
/^typedef.*int[0-9]*_t;$/d
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Inodes that are inserted into the perag tree but still under
construction are flagged with the XFS_INEW bit. Most contexts either
skip such inodes when they are encountered or have the ability to
handle them.
The runtime quotaoff sequence introduces a context that must wait
for construction of such inodes to correctly ensure that all dquots
in the fs are released. In anticipation of this, support the ability
to wait on new inodes. Wake the appropriate bit when XFS_INEW is
cleared.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
This patch drops the XFS-own i_iolock and uses the VFS i_rwsem which
recently replaced i_mutex instead. This means we only have to take
one lock instead of two in many fast path operations, and we can
also shrink the xfs_inode structure. Thanks to the xfs_ilock family
there is very little churn, the only thing of note is that we need
to switch to use the lock_two_directory helper for taking the i_rwsem
on two inodes in a few places to make sure our lock order matches
the one used in the VFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Filesystem shutdown testing on an older distro kernel has uncovered an
imbalanced locking pattern for the inode flush lock in
xfs_reclaim_inode(). Specifically, there is a double unlock sequence
between the call to xfs_iflush_abort() and xfs_reclaim_inode() at the
"reclaim:" label.
This actually does not cause obvious problems on current kernels due to
the current flush lock implementation. Older kernels use a counting
based flush lock mechanism, however, which effectively breaks the lock
indefinitely when an already unlocked flush lock is repeatedly unlocked.
Though this only currently occurs on filesystem shutdown, it has
reproduced the effect of elevating an fs shutdown to a system-wide crash
or hang.
As it turns out, the flush lock is not actually required for the reclaim
logic in xfs_reclaim_inode() because by that time we have already cycled
the flush lock once while holding ILOCK_EXCL. Therefore, remove the
additional flush lock/unlock cycle around the 'reclaim:' label and
update branches into this label to release the flush lock where
appropriate. Add an assert to xfs_ifunlock() to help prevent future
occurences of the same problem.
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
If the admin doesn't set a CoW extent size or a regular extent size
hint, default to creating CoW reservations 32 blocks long to reduce
fragmentation.
Signed-off-by: DarricK J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a per-inode extent size allocator hint for copy-on-write. This
hint is separate from the existing extent size hint so that CoW can
take advantage of the fragmentation-reducing properties of extent size
hints without disabling delalloc for regular writes.
The extent size hint that's fed to the allocator during a copy on
write operation is the greater of the cowextsize and regular extsize
hint.
During reflink, if we're sharing the entire source file to the entire
destination file and the destination file doesn't already have a
cowextsize hint, propagate the source file's cowextsize hint to the
destination file.
Furthermore, zero the bulkstat buffer prior to setting the fields
so that we don't copy kernel memory contents into userspace.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Introduce a new in-core fork for storing copy-on-write delalloc
reservations and allocated extents that are in the process of being
written out.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Log recovery will iget an inode to replay BUI items and iput the inode
when it's done. Unfortunately, if the inode was unlinked, the iput
will see that i_nlink == 0 and decide to truncate & free the inode,
which prevents us from replaying subsequent BUIs. We can't skip the
BUIs because we have to replay all the redo items to ensure that
atomic operations complete.
Since unlinked inode recovery will reap the inode anyway, we can
safely introduce a new inode flag to indicate that an inode is in this
'unlinked recovery' state and should not be auto-reaped in the
drop_inode path.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
