| Age | Commit message (Collapse) | Author |
|---|
|
reiserfs_xattr_[sg]et() will fail with -EOPNOTSUPP for V1 inodes anyway,
and all reiserfs instances of ->[sg]et() call it and so does ->set_acl().
Checks for name length in the instances had been bogus; they should've
been "bugger off if it's _exactly_ the prefix" (as generic would
do on its own) and not "bugger off if it's shorter than the prefix" -
that can't happen.
xattr_full_name() is needed to adjust for the fact that generic instances
will skip the prefix in the name passed to ->[gs]et(); reiserfs homegrown
analogues didn't.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dquot_initialize() can now return error. Handle it where possible.
Signed-off-by: Jan Kara <jack@suse.com>
|
|
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The reiserfs code is littered with extra parens in places where the authors
may not have been certain about precedence of & vs ->. This patch cleans them
out.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch moves reiserfs closer to adhering to the style rules by
removing leading whitespace from labels.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
journal_mark_dirty doesn't need a separate sb argument; It's provided
by the transaction handle.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
journal_end doesn't need a separate sb argument; it's provided by the
transaction handle.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
journal_end takes a block count argument but doesn't actually use it
for anything. We can remove it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch reformats comments in the reiserfs code to fit in 80 columns and
to follow the style rules.
There is no functional change but it helps make my eyes bleed less.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
This patch does a quick search and replace:
B_N_PITEM_HEAD() -> item_head()
B_N_PDELIM_KEY() -> internal_key()
B_N_PKEY() -> leaf_key()
B_N_PITEM() -> item_body()
And the item_head version:
B_I_PITEM() -> ih_item_body()
I_ENTRY_COUNT() -> ih_entry_count()
And the treepath variants:
get_ih() -> tp_item_head()
PATH_PITEM_HEAD() -> tp_item_head()
get_item() -> tp_item_body()
... which makes the code much easier on the eyes.
I've also removed a few unused macros.
Checkpatch will complain about the 80 character limit for do_balan.c.
I've addressed that in a later patchset to split up balance_leaf().
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Also don't bother to set up a .get_acl method for symlinks as we do not
support access control (ACLs or even mode bits) for symlinks in Linux.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The reiserfs write lock replaced the BKL and uses similar semantics.
Frederic's locking code makes a distinction between when the lock is nested
and when it's being acquired/released, but I don't think that's the right
distinction to make.
The right distinction is between the lock being released at end-of-use and
the lock being released for a schedule. The unlock should return the depth
and the lock should restore it, rather than the other way around as it is now.
This patch implements that and adds a number of places where the lock
should be dropped.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
|
|
d_instantiate(dentry, inode);
unlock_new_inode(inode);
is a bad idea; do it the other way round...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
boolean "does it have to be exclusive?" flag is passed instead;
Local filesystem should just ignore it - the object is guaranteed
not to be there yet.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument. And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss. This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Reiserfs does not have problems with references to unlinked directories.
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Only a few file systems need this. Start by pushing it down into each
rename method (except gfs2 and xfs) so that it can be dealt with on a
per-fs basis.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Only a few file systems need this. Start by pushing it down into each
fs rmdir method (except gfs2 and xfs) so it can be dealt with on a per-fs
basis.
This does not change behavior for any in-tree file systems.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
|
|
Now that VFS check for inode->i_nlink == 0 and returns proper
error, remove similar check from file system
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
if directory has so many subdirectories that its link count is set
to 1 (i.e. "can't tell accurately") and reiserfs_new_inode() fails,
we shouldn't decrement the parent's link count in cleanup path;
that's what DEC_DIR_INODE_NLINK() is for. As it is, we end up
with parent suddenly getting zero i_nlink, with very unpleasant
effects.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Clones an existing reference to inode; caller must already hold one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Get rid of the drop dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_drop helper to __dquot_drop
and vfs_dq_drop to dquot_drop to have a consistent namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
reiserfs_unlink() may or may not be called under the reiserfs
lock.
But it also takes the reiserfs lock and can then acquire it
recursively which leads to do_journal_begin_r() that fails to
relax the reiserfs lock before grabbing the journal mutex,
creating an unexpected lock inversion.
We need to ensure reiserfs_unlink() won't get the reiserfs lock
recursively using reiserfs_write_lock_once().
This fixes the following warning that precedes a lock inversion
report (reiserfs lock <-> journal mutex).
------------[ cut here ]------------
WARNING: at fs/reiserfs/lock.c:95 reiserfs_lock_check_recursive+0x3a/0x50()
Hardware name: MS-7418
Unwanted recursive reiserfs lock!
Pid: 3208, comm: dbench Not tainted 2.6.32-atom #177
Call Trace:
[<c114327a>] ? reiserfs_lock_check_recursive+0x3a/0x50
[<c114327a>] ? reiserfs_lock_check_recursive+0x3a/0x50
[<c10373a7>] warn_slowpath_common+0x67/0xc0
[<c114327a>] ? reiserfs_lock_check_recursive+0x3a/0x50
[<c1037446>] warn_slowpath_fmt+0x26/0x30
[<c114327a>] reiserfs_lock_check_recursive+0x3a/0x50
[<c113c213>] do_journal_begin_r+0x83/0x360
[<c105eb16>] ? __lock_acquire+0x1296/0x19e0
[<c1142a57>] ? xattr_unlink+0x57/0xb0
[<c113c670>] journal_begin+0x80/0x130
[<c1116d5d>] reiserfs_unlink+0x7d/0x2d0
[<c1142a57>] ? xattr_unlink+0x57/0xb0
[<c1142a57>] ? xattr_unlink+0x57/0xb0
[<c1142a57>] ? xattr_unlink+0x57/0xb0
[<c1142a64>] xattr_unlink+0x64/0xb0
[<c1143169>] delete_one_xattr+0x29/0x100
[<c11427ab>] reiserfs_for_each_xattr+0x10b/0x290
[<c1143140>] ? delete_one_xattr+0x0/0x100
[<c1401ca9>] ? mutex_lock_nested+0x299/0x340
[<c11429aa>] reiserfs_delete_xattrs+0x1a/0x60
[<c11432f9>] ? reiserfs_write_lock_once+0x29/0x50
[<c111ea1f>] reiserfs_delete_inode+0x9f/0x150
[<c11b0d0f>] ? _atomic_dec_and_lock+0x4f/0x70
[<c111e980>] ? reiserfs_delete_inode+0x0/0x150
[<c10c9c32>] generic_delete_inode+0xa2/0x170
[<c10c9d4f>] generic_drop_inode+0x4f/0x70
[<c10c8b07>] iput+0x47/0x50
[<c10c0965>] do_unlinkat+0xd5/0x160
[<c10505c6>] ? up_read+0x16/0x30
[<c1022ab7>] ? do_page_fault+0x187/0x330
[<c1002fd8>] ? restore_all_notrace+0x0/0x18
[<c1022930>] ? do_page_fault+0x0/0x330
[<c105cbe4>] ? trace_hardirqs_on_caller+0x124/0x170
[<c10c0a00>] sys_unlink+0x10/0x20
[<c1002ec4>] sysenter_do_call+0x12/0x32
---[ end trace 2e35d71a6cc69d0c ]---
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
|
|
reiserfs_mkdir() acquires the reiserfs lock, assuming it has been called
from the dir inodes callbacks, without the lock held.
But it can also be called from other internal sites such as
reiserfs_xattr_init() which already holds the lock. This recursive
locking leads to further wrong assumptions. For example, later calls
to reiserfs_mutex_lock_safe() won't actually unlock the reiserfs lock
the time we acquire a given mutex, creating unexpected lock inversions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Laurent Riffard <laurent.riffard@free.fr>
|
|
The write lock can be acquired recursively in reiserfs_lookup(). But we may
want to *really* release the lock before possible rescheduling from a
reiserfs_lookup() callee.
Hence we want to only acquire the lock once (ie: not recursively).
[ Impact: prevent from possible false unreleased write lock on sleeping ]
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
With Al Viro's patch to move privroot lookup to fs mount, there's no need
to have special code to hide the privroot in reiserfs_lookup.
I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and
removed the last user of reiserfs_xattrs().
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* reiserfs-updates: (35 commits)
reiserfs: rename [cn]_* variables
reiserfs: rename p_._ variables
reiserfs: rename p_s_tb to tb
reiserfs: rename p_s_inode to inode
reiserfs: rename p_s_bh to bh
reiserfs: rename p_s_sb to sb
reiserfs: strip trailing whitespace
reiserfs: cleanup path functions
reiserfs: factor out buffer_info initialization
reiserfs: add atomic addition of selinux attributes during inode creation
reiserfs: use generic readdir for operations across all xattrs
reiserfs: journaled xattrs
reiserfs: use generic xattr handlers
reiserfs: remove i_has_xattr_dir
reiserfs: make per-inode xattr locking more fine grained
reiserfs: eliminate per-super xattr lock
reiserfs: simplify xattr internal file lookups/opens
reiserfs: Clean up xattrs when REISERFS_FS_XATTR is unset
reiserfs: remove IS_PRIVATE helpers
reiserfs: remove link detection code
...
Fixed up conflicts manually due to:
- quota name cleanups vs variable naming changes:
fs/reiserfs/inode.c
fs/reiserfs/namei.c
fs/reiserfs/stree.c
fs/reiserfs/xattr.c
- exported include header cleanups
include/linux/reiserfs_fs.h
|
|
This patch strips trailing whitespace from the reiserfs code.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
