summaryrefslogtreecommitdiff
path: root/fs/orangefs/acl.c
AgeCommit message (Collapse)Author
2019-05-03orangefs: reorganize setattr functions to track attribute changesMartin Brandenburg
OrangeFS accepts a mask indicating which attributes were changed. The kernel must not set any bits except those that were actually changed. The kernel must set the uid/gid of the request to the actual uid/gid responsible for the change. Code path for notify_change initiated setattrs is orangefs_setattr(dentry, iattr) -> __orangefs_setattr(inode, iattr) In kernel changes are initiated by calling __orangefs_setattr. Code path for writeback is orangefs_write_inode -> orangefs_inode_setattr attr_valid and attr_uid and attr_gid change together under i_lock. I_DIRTY changes separately. __orangefs_setattr lock if needs to be cleaned first, unlock and retry set attr_valid copy data in unlock mark_inode_dirty orangefs_inode_setattr lock copy attributes out unlock clear getattr_time # __writeback_single_inode clears dirty orangefs_inode_getattr # possible to get here with attr_valid set and not dirty lock if getattr_time ok or attr_valid set, unlock and return unlock do server operation # another thread may getattr or setattr, so check for that lock if getattr_time ok or attr_valid, unlock and return else, copy in update getattr_time unlock Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2018-10-10orangefs: cache NULL when both default_acl and acl are NULLChengguang Xu
default_acl and acl of newly created inode will be initiated as ACL_NOT_CACHED in vfs function inode_init_always() and later will be updated by calling xxx_init_acl() in specific filesystems. Howerver, when default_acl and acl are NULL then they keep the value of ACL_NOT_CACHED, this patch tries to cache NULL for acl/default_acl in this case. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2018-02-22get rid of pointless includes of fs_struct.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-13orangefs: stop setting atime on inode dirtyMartin Brandenburg
The previous code path was to mark the inode dirty, let orangefs_inode_dirty set a flag in our private inode, then later during inode release call orangefs_flush_inode which notices the flag and writes the atime out. The code path worked almost identically for mtime, ctime, and mode except that those flags are set explicitly and not as side effects of dirty. Now orangefs_flush_inode is removed. Marking an inode dirty does not imply an atime update. Any place where flags were set before is now an explicit call to orangefs_inode_setattr. Since OrangeFS does not utilize inode writeback, the attribute change should be written out immediately. Fixes generic/120. In namei.c, there are several places where the directory mtime and ctime are set, but only the mtime is sent to the server. These don't seem right, but I've left them as is for now. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14orangefs: Adjust three checks for null pointersMarkus Elfring
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2017-09-14orangefs: react properly to posix_acl_update_mode's aftermath.Mike Marshall
posix_acl_update_mode checks to see if the permissions described by the ACL can be encoded into the object's mode. If so, it sets "acl" to NULL and "mode" to the new desired value. Prior to this patch we failed to actually propagate the new mode back to the server. Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2017-09-14orangefs: Don't clear SGID when inheriting ACLsJan Kara
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by creating __orangefs_set_acl() function that does not call posix_acl_update_mode() and use it when inheriting ACLs. That prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: stable@vger.kernel.org CC: Mike Marshall <hubcap@omnibond.com> CC: pvfs2-developers@beowulf-underground.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-09-22posix_acl: Clear SGID bit when setting file permissionsJan Kara
When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2016-07-05orangefs: Remove useless xattr prefix argumentsAndreas Gruenbacher
Mike, On Fri, Jun 3, 2016 at 9:44 PM, Mike Marshall <hubcap@omnibond.com> wrote: > We use the return value in this one line you changed, our userspace code gets > ill when we send it (-ENOMEM +1) as a key length... ah, my mistake. Here's a fixed version. Thanks, Andreas Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-07-05orangefs: Remove useless definesAndreas Gruenbacher
The ORANGEFS_XATTR_INDEX_ defines are unused; the ORANGEFS_XATTR_NAME_ defines only obfuscate the code. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-12-04Orangefs: change pvfs2 filenames to orangefsMike Marshall
Also changed references within source files that referred to header files whose names had changed. Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-12-03OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.Yi Liu
OrangeFS was formerly known as PVFS2 and retains the name in many places. I leave the device /dev/pvfs2-req since this affects userspace. I leave the filesystem type pvfs2 since this affects userspace. Further the OrangeFS sysint library reads fstab for an entry of type pvfs2 independently of kernel mounts. I leave extended attribute keys user.pvfs2 and system.pvfs2 as the sysint library understands these. I leave references to userspace binaries still named pvfs2. I leave the filenames. Signed-off-by: Yi Liu <yi9@clemson.edu> [martin@omnibond.com: clairify above constraints and merge] Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-10-03Orangefs: kernel client part 2Mike Marshall
Signed-off-by: Mike Marshall <hubcap@omnibond.com>