| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull parallel filesystem directory handling update from Al Viro.
This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.
The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.
The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).
A more detailed explanation of the process from Al Viro:
"The xattr work starts with some acl fixes, then switches ->getxattr to
passing inode and dentry separately. This is the point where the
things start to get tricky - that got merged into the very beginning
of the -rc3-based #work.lookups, to allow untangling the
security_d_instantiate() mess. The xattr work itself proceeds to
switch a lot of filesystems to generic_...xattr(); no complications
there.
After that initial xattr work, the series then does the following:
- untangle security_d_instantiate()
- convert a bunch of open-coded lookup_one_len_unlocked() to calls of
that thing; one such place (in overlayfs) actually yields a trivial
conflict with overlayfs fixes later in the cycle - overlayfs ended
up switching to a variant of lookup_one_len_unlocked() sans the
permission checks. I would've dropped that commit (it gets
overridden on merge from #ovl-fixes in #for-next; proper resolution
is to use the variant in mainline fs/overlayfs/super.c), but I
didn't want to rebase the damn thing - it was fairly late in the
cycle...
- some filesystems had managed to depend on lookup/lookup exclusion
for *fs-internal* data structures in a way that would break if we
relaxed the VFS exclusion. Fixing hadn't been hard, fortunately.
- core of that series - parallel lookup machinery, replacing
->i_mutex with rwsem, making lookup_slow() take it only shared. At
that point lookups happen in parallel; lookups on the same name
wait for the in-progress one to be done with that dentry.
Surprisingly little code, at that - almost all of it is in
fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
making it use the new primitive and actually switching to locking
shared.
- parallel readdir stuff - first of all, we provide the exclusion on
per-struct file basis, same as we do for read() vs lseek() for
regular files. That takes care of most of the needed exclusion in
readdir/readdir; however, these guys are trickier than lookups, so
I went for switching them one-by-one. To do that, a new method
'->iterate_shared()' is added and filesystems are switched to it
as they are either confirmed to be OK with shared lock on directory
or fixed to be OK with that. I hope to kill the original method
come next cycle (almost all in-tree filesystems are switched
already), but it's still not quite finished.
- several filesystems get switched to parallel readdir. The
interesting part here is dealing with dcache preseeding by readdir;
that needs minor adjustment to be safe with directory locked only
shared.
Most of the filesystems doing that got switched to in those
commits. Important exception: NFS. Turns out that NFS folks, with
their, er, insistence on VFS getting the fuck out of the way of the
Smart Filesystem Code That Knows How And What To Lock(tm) have
grown the locking of their own. They had their own homegrown
rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
is the reader there). Of course, with VFS getting the fuck out of
the way, as requested, the actual smarts of the smart filesystem
code etc. had become exposed...
- do_last/lookup_open/atomic_open cleanups. As the result, open()
without O_CREAT locks the directory only shared. Including the
->atomic_open() case. Backmerge from #for-linus in the middle of
that - atomic_open() fix got brought in.
- then comes NFS switch to saner (VFS-based ;-) locking, killing the
homegrown "lookup and readdir are writers" kinda-sorta rwsem. All
exclusion for sillyunlink/lookup is done by the parallel lookups
mechanism. Exclusion between sillyunlink and rmdir is a real rwsem
now - rmdir being the writer.
Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
now.
- the rest of the series consists of switching a lot of filesystems
to parallel readdir; in a lot of cases ->llseek() gets simplified
as well. One backmerge in there (again, #for-linus - rockridge
fix)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
ext4: switch to ->iterate_shared()
hfs: switch to ->iterate_shared()
hfsplus: switch to ->iterate_shared()
hostfs: switch to ->iterate_shared()
hpfs: switch to ->iterate_shared()
hpfs: handle allocation failures in hpfs_add_pos()
gfs2: switch to ->iterate_shared()
f2fs: switch to ->iterate_shared()
afs: switch to ->iterate_shared()
befs: switch to ->iterate_shared()
befs: constify stuff a bit
isofs: switch to ->iterate_shared()
get_acorn_filename(): deobfuscate a bit
btrfs: switch to ->iterate_shared()
logfs: no need to lock directory in lseek
switch ecryptfs to ->iterate_shared
9p: switch to ->iterate_shared()
fat: switch to ->iterate_shared()
romfs, squashfs: switch to ->iterate_shared()
more trivial ->iterate_shared conversions
...
|
|
Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
introduced this issue. ocfs2_setattr called by chmod command holds
cluster wide inode lock when calling posix_acl_chmod. This latter
function in turn calls ocfs2_iop_get_acl and ocfs2_iop_set_acl. These
two are also called directly from vfs layer for getfacl/setfacl commands
and therefore acquire the cluster wide inode lock. If a remote
conversion request comes after the first inode lock in ocfs2_setattr,
OCFS2_LOCK_BLOCKED will be set. And this will cause the second call to
inode lock from the ocfs2_iop_get_acl() to block indefinetly.
The deleted version of ocfs2_acl_chmod() calls __posix_acl_chmod() which
does not call back into the filesystem. Therefore, we restore
ocfs2_acl_chmod(), modify it slightly for locking as needed, and use that
instead.
Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The rest of work.xattr stuff isn't needed for this branch
|
|
... and neither can ever be NULL
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the current implementation of unaligned aio+dio, lock order behave as
follow:
in user process context:
-> call io_submit()
-> get i_mutex
<== window1
-> get ip_unaligned_aio
-> submit direct io to block device
-> release i_mutex
-> io_submit() return
in dio work queue context(the work queue is created in __blockdev_direct_IO):
-> release ip_unaligned_aio
<== window2
-> get i_mutex
-> clear unwritten flag & change i_size
-> release i_mutex
There is a limitation to the thread number of dio work queue. 256 at
default. If all 256 thread are in the above 'window2' stage, and there
is a user process in the 'window1' stage, the system will became
deadlock. Since the user process hold i_mutex to wait ip_unaligned_aio
lock, while there is a direct bio hold ip_unaligned_aio mutex who is
waiting for a dio work queue thread to be schedule. But all the dio
work queue thread is waiting for i_mutex lock in 'window2'.
This case only happened in a test which send a large number(more than
256) of aio at one io_submit() call.
My design is to remove ip_unaligned_aio lock. Change it to a sync io
instead. Just like ip_unaligned_aio lock, serialize the unaligned aio
dio.
[akpm@linux-foundation.org: remove OCFS2_IOCB_UNALIGNED_IO, per Junxiao Bi]
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up ocfs2_file_write_iter & ocfs2_prepare_inode_for_write:
* remove append dio check: it will be checked in ocfs2_direct_IO()
* remove file hole check: file hole is supported for now
* remove inline data check: it will be checked in ocfs2_direct_IO()
* remove the full_coherence check when append dio: we will get the
inode_lock in ocfs2_dio_get_block, there is no need to fall back to
buffer io to ensure the coherence semantics.
Now the drop dio procedure is gone. :)
[akpm@linux-foundation.org: remove unused label]
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some versions of tar assume that files with st_blocks == 0 do not
contain any data and will skip reading them entirely. See also commit
9206c561554c ("ext4: return non-zero st_blocks for inline data").
Signed-off-by: John Haxby <john.haxby@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Acked-by: Gang He <ghe@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PID: 614 TASK: ffff882a739da580 CPU: 3 COMMAND: "ocfs2dc"
#0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d
#1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5
#2 [ffff882ecc375af0] oops_end at ffffffff815091d8
#3 [ffff882ecc375b20] die at ffffffff8101868b
#4 [ffff882ecc375b50] do_trap at ffffffff81508bb0
#5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5
#6 [ffff882ecc375c40] invalid_op at ffffffff815116fb
[exception RIP: ocfs2_ci_checkpointed+208]
RIP: ffffffffa0a7e940 RSP: ffff882ecc375cf0 RFLAGS: 00010002
RAX: 0000000000000001 RBX: 000000000000654b RCX: ffff8812dc83f1f8
RDX: 00000000000017d9 RSI: ffff8812dc83f1f8 RDI: ffffffffa0b2c318
RBP: ffff882ecc375d20 R8: ffff882ef6ecfa60 R9: ffff88301f272200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffff
R13: ffff8812dc83f4f0 R14: 0000000000000000 R15: ffff8812dc83f1f8
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2]
#8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2]
#9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2]
#10 [ffff882ecc375e18] ocfs2_downconvert_thread_do_work at ffffffffa0a85445 [ocfs2]
#11 [ffff882ecc375e68] ocfs2_downconvert_thread at ffffffffa0a854de [ocfs2]
#12 [ffff882ecc375ee8] kthread at ffffffff81090da7
#13 [ffff882ecc375f48] kernel_thread_helper at ffffffff81511884
assert is tripped because the tran is not checkpointed and the lock level is PR.
Some time ago, chmod command had been executed. As result, the following call
chain left the inode cluster lock in PR state, latter on causing the assert.
system_call_fastpath
-> my_chmod
-> sys_chmod
-> sys_fchmodat
-> notify_change
-> ocfs2_setattr
-> posix_acl_chmod
-> ocfs2_iop_set_acl
-> ocfs2_set_acl
-> ocfs2_acl_set_mode
Here is how.
1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
1120 {
1247 ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do.
..
1258 if (!status && attr->ia_valid & ATTR_MODE) {
1259 status = posix_acl_chmod(inode, inode->i_mode);
519 posix_acl_chmod(struct inode *inode, umode_t mode)
520 {
..
539 ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS);
287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ...
288 {
289 return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL);
224 int ocfs2_set_acl(handle_t *handle,
225 struct inode *inode, ...
231 {
..
252 ret = ocfs2_acl_set_mode(inode, di_bh,
253 handle, mode);
168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ...
170 {
183 if (handle == NULL) {
>>> BUG: inode lock not held in ex at this point <<<
184 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb),
185 OCFS2_INODE_UPDATE_CREDITS);
ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach
ocfs2_acl_set_mode.#181 and do trans, the inode cluster lock is not held in EX
mode (it should be). How this could have happended?
We are the lock master, were holding lock EX and have released it in
ocfs2_setattr.#1247. Note that there are no holders of this lock at
this point. Another node needs the lock in PR, and we downconvert from
EX to PR. So the inode lock is PR when do the trans in
ocfs2_acl_set_mode.#184. The trans stays in core (not flushed to disc).
Now another node want the lock in EX, downconvert thread gets kicked
(the one that tripped assert abovt), finds an unflushed trans but the
lock is not EX (it is PR). If the lock was at EX, it would have flushed
the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before
downconverting (to NULL) for the request.
ocfs2_setattr must not drop inode lock ex in this code path. If it
does, takes it again before the trans, say in ocfs2_set_acl, another
cluster node can get in between, execute another setattr, overwriting
the one in progress on this node, resulting in a mode acl size combo
that is a mix of the two.
Orabug: 20189959
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 86b9c6f3f891 ("ocfs2: remove filesize checks for sync I/O
journal commit") removes filesize checks for sync I/O journal commit,
variables old_size and old_clusters are not actually used any more. So
clean them up.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1) Take rw EX lock in case of append dio.
2) Explicitly treat the error code -EIOCBQUEUED as normal.
3) Set di_bh to NULL after brelse if it may be used again later.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During direct io the inode will be added to orphan first and then
deleted from orphan. There is a race window that the orphan entry will
be deleted twice and thus trigger the BUG when validating
OCFS2_DIO_ORPHANED_FL in ocfs2_del_inode_from_orphan.
ocfs2_direct_IO_write
...
ocfs2_add_inode_to_orphan
>>>>>>>> race window.
1) another node may rm the file and then down, this node
take care of orphan recovery and clear flag
OCFS2_DIO_ORPHANED_FL.
2) since rw lock is unlocked, it may race with another
orphan recovery and append dio.
ocfs2_del_inode_from_orphan
So take inode mutex lock when recovering orphans and make rw unlock at the
end of aio write in case of append dio.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_file_write_iter() is usng the wrong return value ('written'). This
will cause ocfs2_rw_unlock() be called both in write_iter & end_io,
triggering a BUG_ON.
This issue was introduced by commit 7da839c47589 ("ocfs2: use
__generic_file_write_iter()").
Orabug: 21612107
Fixes: 7da839c47589 ("ocfs2: use __generic_file_write_iter()")
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dquot_initialize() can now return error. Handle it where possible.
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Jan Kara <jack@suse.com>
|
|
Currently when some error happened in ->acquire_dquot(), dqget() just
returned NULL. That was indistinguishable from a case when e.g. someone
run quotaoff and so was generally silently ignored. However
->acquire_dquot() can fail because of ENOSPC or EIO in which case user
should better know. So propagate error up from ->acquire_dquot properly.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
|
|
In ocfs2 direct read/write, OCFS2_IOCB_SEM lock type is used to protect
inode->i_alloc_sem rw semaphore lock in the earlier kernel version.
However, in the latest kernel, inode->i_alloc_sem rw semaphore lock is not
used at all, so OCFS2_IOCB_SEM lock type needs to be removed.
Signed-off-by: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
we can do that now - all we need is to clear IOCB_DIRECT from ->ki_flags in
"can't do dio" case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... avoiding write_iter/fcntl races.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... returning -E... upon error and amount of data left in iter after
(possible) truncation upon success. Note, that normal case gives
a non-zero (positive) return value, so any tests for != 0 _must_ be
updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Conflicts:
fs/ext4/file.c
|
|
Alignment checks for dio depend upon the range truncation done by
generic_write_checks(). They can be done as soon as we got ocfs2_rw_lock()
and that actually makes ocfs2_prepare_inode_for_write() simpler.
The only thing to watch out for is restoring the original count
in "unlock and redo without dio" case. Position doesn't need to be
restored, since we change it only in O_APPEND case and in that case it
will be reassigned anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
it's &iocb->ki_pos; no need to obfuscate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
all remaining callers are passing 0; some just obscure that fact.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
"ocfs2 syncs the wrong range" had been broken; prior to it the
code was doing the wrong thing in case of O_APPEND, all right,
but _after_ it we were syncing the wrong range in 100% cases.
*ppos, aka iocb->ki_pos is incremented prior to that point,
so we are always doing sync on the area _after_ the one we'd
written to.
Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
unfortunately, I'd missed his mail back then ;-/
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
generic_file_direct_write() already does that. Broken by
"ocfs2: do not fallback to buffer I/O write if appending"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is no need to pass the total request length in the kiocb, as
we already get passed in through the iov_iter argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Intruduce a bit OCFS2_FEATURE_RO_COMPAT_APPEND_DIO and check it in
write flow. If the bit is not set, fall back to the old way.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Complte the rest request thourgh buffer io after direct write performed.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now we can do direct io and do not fallback to buffered IO any more in
case of append O_DIRECT write.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently in case of append O_DIRECT write (block not allocated yet),
ocfs2 will fall back to buffered I/O. This has some disadvantages.
Firstly, it is not the behavior as expected. Secondly, it will consume
huge page cache, e.g. in mass backup scenario. Thirdly, modern
filesystems such as ext4 support this feature.
In this patch set, the direct I/O write doesn't fallback to buffer I/O
write any more because the allocate blocks are enabled in direct I/O now.
This patch (of 9):
Prepare some interfaces which will be used in append O_DIRECT write.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
|
|
Variable "why" is not yet initialized at line 615, fix it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When running ocfs2 test suite multiple nodes reflink stress test, for a
4 nodes cluster, every unlink() for refcounted file needs about 700s.
The slow unlink is caused by the contention of refcount tree lock since
all nodes are unlink files using the same refcount tree. When the
unlinking file have many extents(over 1600 in our test), most of the
extents has refcounted flag set. In ocfs2_commit_truncate(), it will
execute the following call trace for every extents. This means it needs
get and released refcount tree lock about 1600 times. And when several
nodes are do this at the same time, the performance will be very low.
ocfs2_remove_btree_range()
-- ocfs2_lock_refcount_tree()
---- ocfs2_refcount_lock()
------ __ocfs2_cluster_lock()
ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to
do lock/unlock once can improve a lot performance.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Wengang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Filesize is not a good indication that the file needs to be synced.
An example where this breaks is:
1. Open the file in O_SYNC|O_RDWR
2. Read a small portion of the file (say 64 bytes)
3. Lseek to starting of the file
4. Write 64 bytes
If the node crashes, it is not written out to disk because this was not
committed in the journal and the other node which reads the file after
recovery reads stale data (even if the write on the other node was
successful)
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF and quota updates from Jan Kara:
"A few UDF fixes and also a few patches which are preparing filesystems
for support of project quotas in VFS"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix loading of special inodes
ocfs2: Back out change to use OCFS2_MAXQUOTAS in ocfs2_setattr()
udf: remove redundant sys_tz declaration
ocfs2: Don't use MAXQUOTAS value
reiserfs: Don't use MAXQUOTAS value
ext3: Don't use MAXQUOTAS value
udf: Fix race between write(2) and close(2)
|
|
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex
osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it
will wait until jbd2 commit thread done. In order journal mode, jbd2
needs flushing dirty data pages first, and this needs get page lock.
So osb->journal->j_trans_barrier should be got before page lock.
But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this
locking order, and this will cause deadlock and hung the whole cluster.
One deadlock catched is the following:
PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle"
#0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524
#1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf
#2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85
#3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55
#4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4
#5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2]
#6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2]
#7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2]
#8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2]
#9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2]
#10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2]
#11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2]
#12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29
#13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1
#14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd
#15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142
RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206
RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000
RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d
RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d
R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d
R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400
ORIG_RAX: 000000000000004d CS: 0033 SS: 002b
crash64> bt
PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt"
#0 [ffff88100f4d1c50] __schedule at ffffffff8150a524
#1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf
#2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2]
#3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2]
#4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2]
#5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2]
#6 [ffff88100f4d1ee8] kthread at ffffffff81090db6
#7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284
crash64> bt
PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86"
#0 [ffff88100def3920] __schedule at ffffffff8150a524
#1 [ffff88100def39c8] schedule at ffffffff8150acbf
#2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c
#3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e
#4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a
#5 [ffff88100def3a58] __lock_page at ffffffff81110687
#6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752
#7 [ffff88100def3be8] generic_writepages at ffffffff8111b901
#8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2]
#9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2]
#10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2]
#11 [ffff88100def3ee8] kthread at ffffffff81090db6
#12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_setattr() actually needs to really use MAXQUOTAS and not
OCFS2_MAXQUOTAS since it will pass the array over to VFS. Currently
this isn't a problem since MAXQUOTAS == OCFS2_MAXQUOTAS but it would
be once we introduce project quotas.
CC: Mark Fasheh <mfasheh@suse.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types ocfs2 supports and with
addition of project quotas these two numbers stop matching. So make
ocfs2 use its private definition.
CC: Mark Fasheh <mfasheh@suse.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: ocfs2-devel@oss.oracle.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The last in-tree caller of block_write_full_page_endio() was removed in
January 2013. It's time to remove the EXPORT_SYMBOL, which leaves
block_write_full_page() as the only caller of
block_write_full_page_endio(), so inline block_write_full_page_endio()
into block_write_full_page().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dheeraj Reddy <dheeraj.reddy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
tracepoints are evil, exhibit #6969...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
