summaryrefslogtreecommitdiff
path: root/fs/nilfs2/the_nilfs.c
AgeCommit message (Collapse)Author
2014-04-03nilfs2: verify metadata sizes read from diskRyusuke Konishi
Add code to check sizes of on-disk data of metadata files such as inode size, segment usage size, DAT entry size, and checkpoint size. Although these sizes are read from disk, the current implementation doesn't check them. If these sizes are not sane on disk, it can cause out-of-range access to metadata or memory access overrun on metadata block buffers due to overflow in sundry calculations. Both lower limit and upper limit of metadata sizes are verified to prevent these issues. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03] nilfs2: use atomic64_t type for inodes_count and blocks_count fields in ↵Vyacheslav Dubeyko
nilfs_root struct The cp_inodes_count and cp_blocks_count are represented as __le64 type in on-disk structure (struct nilfs_checkpoint). But analogous fields in in-core structure (struct nilfs_root) are represented by atomic_t type. This patch replaces atomic_t on atomic64_t type in representation of inodes_count and blocks_count fields in struct nilfs_root. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Joern Engel <joern@logfs.org> Cc: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30nilfs2: fix deadlock issue between chcp and thaw ioctlsRyusuke Konishi
An fs-thaw ioctl causes deadlock with a chcp or mkcp -s command: chcp D ffff88013870f3d0 0 1325 1324 0x00000004 ... Call Trace: nilfs_transaction_begin+0x11c/0x1a0 [nilfs2] wake_up_bit+0x20/0x20 copy_from_user+0x18/0x30 [nilfs2] nilfs_ioctl_change_cpmode+0x7d/0xcf [nilfs2] nilfs_ioctl+0x252/0x61a [nilfs2] do_page_fault+0x311/0x34c get_unmapped_area+0x132/0x14e do_vfs_ioctl+0x44b/0x490 __set_task_blocked+0x5a/0x61 vm_mmap_pgoff+0x76/0x87 __set_current_blocked+0x30/0x4a sys_ioctl+0x4b/0x6f system_call_fastpath+0x16/0x1b thaw D ffff88013870d890 0 1352 1351 0x00000004 ... Call Trace: rwsem_down_failed_common+0xdb/0x10f call_rwsem_down_write_failed+0x13/0x20 down_write+0x25/0x27 thaw_super+0x13/0x9e do_vfs_ioctl+0x1f5/0x490 vm_mmap_pgoff+0x76/0x87 sys_ioctl+0x4b/0x6f filp_close+0x64/0x6c system_call_fastpath+0x16/0x1b where the thaw ioctl deadlocked at thaw_super() when called while chcp was waiting at nilfs_transaction_begin() called from nilfs_ioctl_change_cpmode(). This deadlock is 100% reproducible. This is because nilfs_ioctl_change_cpmode() first locks sb->s_umount in read mode and then waits for unfreezing in nilfs_transaction_begin(), whereas thaw_super() locks sb->s_umount in write mode. The locking of sb->s_umount here was intended to make snapshot mounts and the downgrade of snapshots to checkpoints exclusive. This fixes the deadlock issue by replacing the sb->s_umount usage in nilfs_ioctl_change_cpmode() with a dedicated mutex which protects snapshot mounts. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16nilfs2: fix NULL pointer dereference in nilfs_load_super_block()Ryusuke Konishi
According to the report from Slicky Devil, nilfs caused kernel oops at nilfs_load_super_block function during mount after he shrank the partition without resizing the filesystem: BUG: unable to handle kernel NULL pointer dereference at 00000048 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP ... Call Trace: [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2] [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2] [<c0226636>] mount_fs+0x36/0x180 [<c023d961>] vfs_kern_mount+0x51/0xa0 [<c023ddae>] do_kern_mount+0x3e/0xe0 [<c023f189>] do_mount+0x169/0x700 [<c023fa9b>] sys_mount+0x6b/0xa0 [<c04abd1f>] sysenter_do_call+0x12/0x28 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc CR2: 0000000000000048 This turned out due to a defect in an error path which runs if the calculated location of the secondary super block was invalid. This patch fixes it and eliminates the reported oops. Reported-by: Slicky Devil <slicky.dvl@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Slicky Devil <slicky.dvl@gmail.com> Cc: <stable@vger.kernel.org> [2.6.30+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-16nilfs2: clamp ns_r_segments_percentage to [1, 99]Haogang Chen
ns_r_segments_percentage is read from the disk. Bogus or malicious value could cause integer overflow and malfunction due to meaningless disk usage calculation. This patch reports error when mounting such bogus volumes. Signed-off-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-10nilfs2: implement resize ioctlRyusuke Konishi
This adds resize ioctl which makes online resize possible. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: use sb instance instead of nilfs_sb_info structRyusuke Konishi
This replaces sbi uses with direct reference to sb instance. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move next generation counter into nilfs objectRyusuke Konishi
Moves s_next_generation counter and a spinlock protecting it to nilfs object from nilfs_sb_info structure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move s_inode_lock and s_dirty_files into nilfs objectRyusuke Konishi
Moves s_inode_lock spinlock and s_dirty_files list to nilfs object from nilfs_sb_info structure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-09nilfs2: move mount options to nilfs objectRyusuke Konishi
This moves mount_opt local variable to nilfs object from nilfs_sb_info struct. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-03-08nilfs2: append blocksize info to warnings during loading super blocksRyusuke Konishi
At present, the same warning message can be output twice when nilfs detected a problem on super blocks: NILFS warning: broken superblock. using spare superblock. NILFS warning: broken superblock. using spare superblock. ... This is because these super blocks are reloaded with the block size written in a super block if it differs from the first block size, but this repetition looks somewhat confusing. So, we hint at what is going on by appending block size information to those messages. Reported-by: Wakko Warner <wakko@animx.eu.org> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: unfold nilfs_dat_inode functionRyusuke Konishi
nilfs_dat_inode function was a wrapper to switch between normal dat inode and gcdat, a clone of the dat inode for garbage collection. This function got obsolete when the gcdat inode was removed, and now we can access the dat inode directly from a nilfs object. So, we will unfold the wrapper and remove it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-01-10nilfs2: get rid of loaded flag from nilfs objectRyusuke Konishi
NILFS_LOADED flag of the nilfs object is not used now, so this will remove it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits) nilfs2: eliminate sparse warning - "context imbalance" nilfs2: eliminate sparse warnings - "symbol not declared" nilfs2: get rid of bdi from nilfs object nilfs2: change license of exported header file nilfs2: add bdev freeze/thaw support nilfs2: accept 64-bit checkpoint numbers in cp mount option nilfs2: remove own inode allocator and destructor for metadata files nilfs2: get rid of back pointer to writable sb instance nilfs2: get rid of mi_nilfs back pointer to nilfs object nilfs2: see state of root dentry for mount check of snapshots nilfs2: use iget for all metadata files nilfs2: get rid of GCDAT inode nilfs2: add routines to redirect access to buffers of DAT file nilfs2: add routines to roll back state of DAT file nilfs2: add routines to save and restore bmap state nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes nilfs2: allow nilfs_clear_inode to clear metadata file inodes nilfs2: get rid of snapshot mount flag nilfs2: simplify life cycle management of nilfs object nilfs2: do not allocate multiple super block instances for a device ...
2010-10-23nilfs2: get rid of bdi from nilfs objectRyusuke Konishi
Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it instead of ns_bdi on the nilfs object and remove ns_bdi. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of back pointer to writable sb instanceRyusuke Konishi
Nilfs object holds a back pointer to a writable super block instance in nilfs->ns_writer, and this became eliminable since sb is now made per device and all inodes have a valid pointer to it. This deletes the ns_writer pointer and a reader/writer semaphore protecting it. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: see state of root dentry for mount check of snapshotsRyusuke Konishi
After applied the patch that unified sb instances, root dentry of snapshots can be left in dcache even after their trees are unmounted. The orphan root dentry/inode keeps a root object, and this causes false positive of nilfs_checkpoint_is_mounted function. This resolves the issue by having nilfs_checkpoint_is_mounted test whether the root dentry is busy or not. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use iget for all metadata filesRyusuke Konishi
This makes use of iget5_locked to allocate or get inode for metadata files to stop using own inode allocator. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: get rid of GCDAT inodeRyusuke Konishi
This applies prepared rollback function and redirect function of metadata file to DAT file, and eliminates GCDAT inode. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: simplify life cycle management of nilfs objectRyusuke Konishi
This stops pre-allocating nilfs object in nilfs_get_sb routine, and stops managing its life cycle by reference counting. nilfs_find_or_create_nilfs() function, nilfs->ns_mount_mutex, nilfs_objects list, and the reference counter will be removed through the simplification. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: do not allocate multiple super block instances for a deviceRyusuke Konishi
This stops allocating multiple super block instances for a device. All snapshots and a current mode mount (i.e. latest tree) will be controlled with nilfs_root objects that are kept within an sb instance. nilfs_get_sb() is rewritten so that it always has a root object for the latest tree and snapshots make additional root objects. The root dentry of the latest tree is binded to sb->s_root even if it isn't attached on a directory. Root dentries of snapshots or the latest tree are binded to mnt->mnt_root on which they are mounted. With this patch, nilfs_find_sbinfo() function, nilfs->ns_supers list, and nilfs->ns_current back pointer, are deleted. In addition, init_nilfs() and load_nilfs() are simplified since they will be called once for a device, not repeatedly called for mount points. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use checkpoint tree for mount check of snapshotsRyusuke Konishi
This rewrites nilfs_checkpoint_is_mounted() function so that it decides whether a checkpoint is mounted by whether the corresponding root object is found in checkpoint tree. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: add checkpoint tree to nilfs objectRyusuke Konishi
To hold multiple versions of a filesystem in one sb instance, a new on-memory structure is necessary to handle one or more checkpoints. This adds a red-black tree of checkpoints to nilfs object, and adds lookup and create functions for them. Each checkpoint is represented by "nilfs_root" structure, and this structure has rb_node to configure the rb-tree. The nilfs_root object is identified with a checkpoint number. For each snapshot, a nilfs_root object is allocated and the checkpoint number of snapshot is assigned to it. For a regular mount (i.e. current mode mount), NILFS_CPTREE_CURRENT_CNO constant is assigned to the corresponding nilfs_root object. Each nilfs_root object has an ifile inode and some counters. These items will displace those of nilfs_sb_info structure in successive patches. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: remove own inode hash used for GCRyusuke Konishi
This uses inode hash function that vfs provides instead of the own hash table for caching gc inodes. This finally removes the own inode hash from nilfs. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: accept future revisionsRyusuke Konishi
Compatibility of nilfs partitions is now managed with three feature sets. This changes old compatibility check with revision number so that it can accept future revisions. Note that we can stop support of experimental versions of nilfs that doesn't know the feature sets by incrementing NILFS_CURRENT_REV. We don't have to do it soon, but it would be a possible option whenever the need arises. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-19Merge branch 'v2.6.36-rc8' into for-2.6.37/barrierJens Axboe
Conflicts: block/blk-core.c drivers/block/loop.c mm/swapfile.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16block: remove BLKDEV_IFL_WAITChristoph Hellwig
All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10nilfs2: replace barriers with explicit flush / FUA usageChristoph Hellwig
Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP detection for barriers and stop setting the barrier flag for discards. tj: nilfs is now fixed to wait for discard completion. Updated this patch accordingly and dropped warning about it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-30nilfs2: fix leak of shadow dat inode in error path of load_nilfsRyusuke Konishi
If load_nilfs() gets an error while doing recovery, it will fail to free the shadow inode of dat (nilfs->ns_gc_dat). This fixes the leak issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-08-19nilfs2: wait for discard to finishRyusuke Konishi
nilfs_discard_segment() doesn't wait for completion of discard requests. This specifies BLKDEV_IFL_WAIT flag when calling blkdev_issue_discard() in order to fix the sync failure. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Christoph Hellwig <hch@lst.de>
2010-08-16nilfs2: fix false warning saying one of two super blocks is brokenRyusuke Konishi
After applying commit b2ac86e1, the following message got appeared after unclean shutdown: > NILFS warning: broken superblock. using spare superblock. This turns out to be a false message due to the change which updates two super blocks alternately. The secondary super block now can be selected if it's newer than the primary one. This kills the false warning by suppressing it if another super block is not actually broken. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-25nilfs2: reject filesystem with unsupported block sizeRyusuke Konishi
This inserts sanity check that refuses to mount a filesystem with unsupported block size. Previously, kernel code of nilfs was looking only limitation of devices though mkfs.nilfs2 limits the range of block sizes; there was no check that prevents rec_len overflow with larger block sizes. With this change, block sizes larger than 64KB or smaller than 1KB will get rejected explicitly by kernel. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: reject incompatible filesystemRyusuke Konishi
This forces nilfs to check compatibility of feature flags so as to reject a filesystem with unknown features when it mounts or remounts the filesystem. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: do not update log cursor for small changeRyusuke Konishi
Super blocks of nilfs are periodically overwritten in order to record the recent log position. This shortens recovery time after unclean unmount, but the current implementation performs the update even for a few blocks of change. If the filesystem gets small changes slowly and continually, super blocks may be updated excessively. This moderates the issue by skipping update of log cursor if it does not cross a segment boundary. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: implement fallback for super root searchRyusuke Konishi
Although nilfs redundantly uses two super blocks and each may point to different position on log, the current version of nilfs does not try fallback to the spare super block when it doesn't find any valid log at the position that the primary super block points to. This has been a cause of mount failures due to write order reversals on barrier less block devices. This inserts fallback code in error path of nilfs_search_super_root routine to resolve the mount failure problem. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: separate setup of log cursor from init_nilfsRyusuke Konishi
This separates a setup routine of log cursor from init_nilfs(). The routine, nilfs_store_log_cursor, reads the last position of the log containing a super root, and initializes relevant state on the nilfs object. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: sync super blocks in turnsJiro SEKIBA
This will sync super blocks in turns instead of syncing duplicate super blocks at the time. This will help searching valid super root when super block is written into disk before log is written, which is happen when barrier-less block devices are unmounted uncleanly. In the situation, old super block likely points to valid log. This patch introduces ns_sbwcount member to the nilfs object and adds nilfs_sb_will_flip() function; ns_sbwcount counts how many times super blocks write back to the disk. And, nilfs_sb_will_flip() decides whether flipping required or not based on the count of ns_sbwcount to sync super blocks asymmetrically. The following functions are also changed: - nilfs_prepare_super(): flips super blocks according to the argument. The argument is calculated by nilfs_sb_will_flip() function. - nilfs_cleanup_super(): sets "clean" flag to both super blocks if they point to the same checkpoint. To update both of super block information, caller of nilfs_commit_super must set the information on both super blocks. Signed-off-by: Jiro SEKIBA <jir@unicus.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: add nilfs_cleanup_superRyusuke Konishi
This function write out filesystem state to super blocks in order to share the same cleanup work. This is a preparation for making super block writeback alternately. Cc: Jiro SEKIBA <jir@unicus.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: get rid of ns_free_segments_countRyusuke Konishi
This counter is unused. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: rename nilfs_recover_logical_segments functionRyusuke Konishi
The function name of nilfs_recover_logical_segments makes no sense. This changes the name into nilfs_salvage_orphan_logs to clarify the role of the function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: refactor recovery logic routinesRyusuke Konishi
Most functions in recovery code take an argument of a super block instance or a nilfs_sb_info struct for convenience sake. This replaces them aggressively with a nilfs object by applying __bread and __breadahead against routines using sb_bread and sb_breadahead. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23nilfs2: add blocksize member to nilfs objectRyusuke Konishi
This stores blocksize in nilfs objects for the successive refactoring of recovery logic. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-21Merge branch 'master' into for-2.6.35Jens Axboe
Conflicts: fs/ext3/fsync.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-10nilfs2: use checkpoint number instead of timestamp to select super blockRyusuke Konishi
Nilfs maintains two super blocks, and selects the new one on mount time if they both have valid checksums and their timestamps differ. However, this has potential for mis-selection since the system clock may be rewinded and the resolution of the timestamps is not high. Usually this doesn't become an issue because both super blocks are updated at the same time when the file system is unmounted. Even if the file system wasn't unmounted cleanly, the roll-forward recovery will find the proper log which stores the latest super root. Thus, the issue can appear only if update of one super block fails and the clock happens to be rewinded. This fixes the issue by using checkpoint numbers instead of timestamps to pick the super block storing the location of the latest log. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-04-29nilfs: fix breakage caused by barrier flag changesStephen Rothwell
After merging the block tree, today's linux-next build (powerpc ppc64_defconfig) failed like this: fs/nilfs2/the_nilfs.c: In function 'nilfs_discard_segments': fs/nilfs2/the_nilfs.c:673: error: 'DISCARD_FL_BARRIER' undeclared (first use in this function) Caused by commit fbd9b09a177a481eda256447c881f014f29034fe ("blkdev: generalize flags for blkdev_issue_fn functions") interacting with commit e902ec9906e844f4613fa6190c6fa65f162dc86e ("nilfs2: issue discard request after cleaning segments") (which netered Linus' tree on about March 4 - before v2.6.34-rc1). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-14nilfs2: remove whitespaces before quoted newlinesRyusuke Konishi
This kills the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline #869: FILE: super.c:869: + "remount to a different snapshot. \n", WARNING: unnecessary whitespace before a quoted newline #389: FILE: the_nilfs.c:389: + printk(KERN_ERR "NILFS: too short segment. \n"); Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13nilfs2: issue discard request after cleaning segmentsJiro SEKIBA
This adds a function to send discard requests for given array of segment numbers, and calls the function when garbage collection succeeded. Signed-off-by: Jiro SEKIBA <jir@unicus.jp> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: add norecovery mount optionRyusuke Konishi
This adds "norecovery" mount option which disables temporal write access to read-only mounts or snapshots during mount/recovery. Without this option, write access will be even performed for those types of mounts; the temporal write access is needed to mount root file system read-only after an unclean shutdown. This option will be helpful when user wants to prevent any write access to the device. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Eric Sandeen <sandeen@redhat.com>
2009-11-20nilfs2: add helper to get if volume is in a valid stateRyusuke Konishi
This adds a helper function, nilfs_valid_fs() which returns if nilfs is in a valid state or not. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20nilfs2: move recovery completion into load_nilfs functionRyusuke Konishi
Although mount recovery of nilfs is integrated in load_nilfs() procedure, the completion of recovery was isolated from the procedure and performed at the end of the fill_super routine. This was somewhat confusing since the recovery is needed for the nilfs object, not for a super block instance. To resolve the inconsistency, this will integrate the recovery completion into load_nilfs(). Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>