| Age | Commit message (Collapse) | Author |
|---|
|
There are several problems in the way a stateid is selected for a
LAYOUTGET operation:
We pick a stateid to use in the RPC prepare op, but that makes
it difficult to serialize LAYOUTGETs that use the open stateid. That
serialization is done in pnfs_update_layout, which occurs well before
the rpc_prepare operation.
Between those two events, the i_lock is dropped and reacquired.
pnfs_update_layout can find that the list has lsegs in it and not do any
serialization, but then later pnfs_choose_layoutget_stateid ends up
choosing the open stateid.
This patch changes the client to select the stateid to use in the
LAYOUTGET earlier, when we're searching for a usable layout segment.
This way we can do it all while holding the i_lock the first time, and
ensure that we serialize any LAYOUTGET call that uses a non-layout
stateid.
This also means a rework of how LAYOUTGET replies are handled, as we
must now get the latest stateid if we want to retransmit in response
to a retryable error.
Most of those errors boil down to the fact that the layout state has
changed in some fashion. Thus, what we really want to do is to re-search
for a layout when it fails with a retryable error, so that we can avoid
reissuing the RPC at all if possible.
While the LAYOUTGET RPC is async, the initiating thread always waits for
it to complete, so it's effectively synchronous anyway. Currently, when
we need to retry a LAYOUTGET because of an error, we drive that retry
via the rpc state machine.
This means that once the call has been submitted, it runs until it
completes. So, we must move the error handling for this RPC out of the
rpc_call_done operation and into the caller.
In order to handle errors like NFS4ERR_DELAY properly, we must also
pass a pointer to the sliding timeout, which is now moved to the stack
in pnfs_update_layout.
The complicating errors are -NFS4ERR_RECALLCONFLICT and
-NFS4ERR_LAYOUTTRYLATER, as those involve a timeout after which we give
up and return NULL back to the caller. So, there is some special
handling for those errors to ensure that the layers driving the retries
can handle that appropriately.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
* bugfixes:
SUNRPC: Fixup socket wait for memory
SUNRPC: Fix a missing break in rpc_anyaddr()
pNFS/flexfiles: Fix an Oopsable typo in ff_mirror_match_fh()
NFS: Fix attribute cache revalidation
NFS: Ensure we revalidate attributes before using execute_ok()
NFS: Flush reclaim writes using FLUSH_COND_STABLE
NFS: Background flush should not be low priority
NFSv4.1/pnfs: Fixup an lo->plh_block_lgets imbalance in layoutreturn
NFSv4: Don't perform cached access checks before we've OPENed the file
NFS: Allow the combination pNFS and labeled NFS
NFS42: handle layoutstats stateid error
nfs: Fix race in __update_open_stateid()
nfs: fix missing assignment in nfs4_sequence_done tracepoint
|
|
The stateid is extremely valuable when debugging.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Instead of displaying a layout segment pointer in these tracepoints,
let's use the layout stateid, now that Olga gave us a set of tools for
displaying them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
pnfs_update_layout is really the "nexus" of layout handling. If it
returns NULL then we end up going through the MDS. This patch adds
some tracepoints to that function that allow us to determine the
cause when we end up going through the MDS unexpectedly.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Operations to which stateid information is added:
close, delegreturn, open, read, setattr, layoutget, layoutcommit, test_stateid,
write, lock, locku, lockt
Format is "stateid=<seqid>:<crc32 hash stateid.other>", also "openstateid=",
"layoutstateid=", and "lockstateid=" for open_file, layoutget, set_lock
tracepoints.
New function is added to internal.h, nfs_stateid_hash(), to compute the hash
trace_nfs4_setattr() is moved from nfs4_do_setattr() to _nfs4_do_setattr()
to get access to stateid.
trace_nfs4_setattr and trace_nfs4_delegreturn are changed from INODE_EVENT
to new event type, INODE_STATEID_EVENT which is same as INODE_EVENT but adds
stateid information
for locking tracepoints, moved trace_nfs4_set_lock() into _nfs4_do_setlk()
to get access to stateid information, and removed trace_nfs4_lock_reclaim(),
trace_nfs4_lock_expired() as they call into _nfs4_do_setlk() and both were
previously same LOCK_EVENT type.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
status_flags not set
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Running xfstest generic/013 with the tracepoint nfs:nfs4_open_file
enabled produces a NULL-pointer dereference when calculating fileid and
filehandle of the opened file. Fix this by checking if state is NULL
before trying to use the inode pointer.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Only support for single file layoutrecall for now.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Allow tracing of return-on-close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is
passed around everywhere, because there used to be multiple _data structs
per _header. Many of these functions then use the _data to find a pointer
to the _header. This patch cleans this up by merging the nfs_pgio_data
structure into nfs_pgio_header and passing nfs_pgio_header around instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
At this point, the only difference between nfs_read_data and
nfs_write_data is the write verifier.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Add tracepoints to detect issues with the TEST_STATEID operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Add tracepoints to nfs41_setup_sequence and nfs41_sequence_done
to track session and slot table state changes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up tracepoints to track read, write and commit, as well as
pNFS reads and writes and commits to the data server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Add tracepoints to help debug uid/gid mappings to username/group.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up tracepoints to track when delegations are set, reclaimed,
returned by the client, or recalled by the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Add tracepoints to debug renames.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up basic tracepoints for debugging NFSv4 setattr, access,
readlink, readdir, get_acl set_acl get_security_label,
and set_security_label.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up basic tracepoints for debugging NFSv4 lookup, unlink/remove,
symlink, mkdir, mknod, fs_locations and secinfo.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up basic tracepoints for debugging NFSv4 file lock/unlock
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up basic tracepoints for debugging NFSv4 file open/close
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Set up basic tracepoints for debugging client id creation/destruction
and session creation/destruction.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
