summaryrefslogtreecommitdiff
path: root/fs/nfs/nfs4state.c
AgeCommit message (Collapse)Author
2010-05-14NFSv4: Don't use GFP_KERNEL allocations in state recoveryTrond Myklebust
We do not want to have the state recovery thread kick off and wait for a memory reclaim, since that may deadlock when the writebacks end up waiting for the state recovery thread to complete. The safe thing is therefore to use GFP_NOFS in all open, close, delegation return, lock, etc. operations that may be called by the state recovery thread. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-05-14NFSv4: Clean up the NFSv4 setclientid operationTrond Myklebust
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-02NFSv4.1: Various fixes to the sequence flag error handlingTrond Myklebust
Ensure that we change the EXCHANGE_ID verifier (i.e. clp->cl_boot_time) when we want to reset all state. This is mainly needed when the server tells us that it is revoking our open or lock stateids. Handle revoking of recallable state by expiring the delegations. Handle callback path issues by expiring the delegations and then resetting the session. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-02-10nfs41: clear NFS4CLNT_RECALL_SLOT bit on session resetAndy Adamson
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-02-10nfs41: implement cb_recall_slotAndy Adamson
Drain the fore channel and reset the max_slots to the new value. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-02-10nfs4: handle -EKEYEXPIRED errors from RPC layerJeff Layton
If a KRB5 TGT ticket expires, we don't want to return an error immediatel. If someone has a long running job and just forgets to run "kinit" in time then this will make it fail. Instead, we want to treat this situation as we would NFS4ERR_DELAY and retry the upcall after delaying a bit with an exponential backoff. This patch just makes any place that would handle NFS4ERR_DELAY also handle -EKEYEXPIRED the same way. In the future, we may want to be more sophisticated however and handle hard vs. soft mounts differently, or specify some upper limit on how long we'll wait for a new TGT to be acquired. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-01-26NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctlyTrond Myklebust
Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
2009-12-15NFSv4: Fix a regression in the NFSv4 state managerTrond Myklebust
Commit 5601a00d671fe89f9b087513244abcd08ad67e7d (nfs: run state manager in privileged mode) introduces a regression in the NFSv4 code when compiled with CONFIG_NFS_V4_1. The calls to nfs4_end_drain_session() from the main loop in nfs4_state_manager() Oops due to the lack of an NFSv4.1 session when running NFSv4.0. The fix is to move those two calls back into nfs41_init_clientid() and nfs4_reset_session(). The calls to nfs4_end_drain_session() that remain inside nfs4_state_manager() are safe, since the NFSv4.0 code will never set the NFS4CLNT_SESSION_DRAINING bit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-15NFSv4: Release the sequence id before restarting a CLOSE rpc callTrond Myklebust
If the CLOSE or OPEN_DOWNGRADE call triggers a state recovery, and has to be resent, then we must release the seqid. Otherwise the open recovery will wait for the close to finish, which causes a deadlock. This is mainly a NFSv4.1 problem, although it can theoretically happen with NFSv4.0 too, in a OPEN_DOWNGRADE situation. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-15nfs: run state manager in privileged modeAlexandros Batsakis
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-15nfs: enforce FIFO ordering of operations trying to acquire slotAlexandros Batsakis
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-08nfs41: Invoke RECLAIM_COMPLETE on all new client idsRicardo Labiaga
The NFSv4.1 spec indicates RECLAIM_COMPLETE is to be issued whenever a client establishes a new client id, not only after detecting the server has rebooted. Set the NFS4CLNT_RECLAIM_REBOOT bit after every new client id has been established. This enables us to issue RECLAIM_COMPLETE during the wrap up of the NFS4CLNT_RECLAIM_REBOOT state. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-07nfs41: Mark stateids in need of reclaim if state manager gets stale clientidRicardo Labiaga
The state manager was not marking the stateids as needing to be reclaimed after reestablishing the clientid. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-06nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTIDRicardo Labiaga
If CREATE_SESSION fails with NFS4ERR_STALE_CLIENTID, don't clear the NFS4CLNT_SESSION_DRAINING flag and don't wake RPCs waiting for the session to be reestablished. We don't have a session yet, so there is no reason to wake other RPCs. This avoids sending spurious compounds with bogus sequenceID during session and state recovery. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> [Trond.Myklebust@netapp.com: cleaned up patch by adding the nfs41_begin/end_drain_session() helpers] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-06nfs41: nfs41_setup_state_renewalRicardo Labiaga
Move call to get the lease time and the setup of the state renewal out of nfs4_create_session so that it can be called after clearing the DRAINING flag. We use the getattr RPC to obtain the lease time, which requires a sequence slot. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING codeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05NFSv41: Fix nfs4_proc_create_sessionTrond Myklebust
We should not assume that nfs41_init_clientid() will always want to initialise the session. If it is being called due to a server reboot, then we just want to reset the session after re-establishing the clientid. Fix this by getting rid of the 'reset' parameter in nfs4_proc_create_session(), and instead relying on whether or not the session slot table pointer is non-NULL. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05nfs41: Invoke RECLAIM_COMPLETERicardo Labiaga
This patch invokes RECLAIM_COMPLETE after the client is done reclaiming state. There are interpretations of the spec that suggest that RECLAIM_COMPLETE should also be issued after a new clientid has been obtained from the server and even if there is no state to reclaim. This tells the server that the client has no state to reclaim even if the client isn't aware the server may have rebooted. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05nfs41: RECLAIM_COMPLETE functionalityRicardo Labiaga
Implements RECLAIM_COMPLETE as an asynchronous RPC. NFS4ERR_DELAY is retried, NFS4ERR_DEADSESSION invokes the error handling but does not result in a retry, since we don't want to have a lingering RECLAIM_COMPLETE call sent in the middle of a possible new state recovery cycle. If a session reset occurs, a new wave of reclaim operations will follow, containing their own RECLAIM_COMPLETE call. We don't want a retry to get on the way of recovery by incorrectly indicating to the server that we're done reclaiming state. A subsequent patch invokes the functionality. Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05NFSv41: nfs4_reset_session must always set NFS4CLNT_SESSION_DRAININGTrond Myklebust
Otherwise we have no guarantees that other processes won't start another RPC call while we're resetting the session. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-05nfs41: check SEQUENCE status flagAlexandros Batsakis
the server can indicate a number of error conditions by setting the appropriate bits in the SEQUENCE operation. The client re-establishes state with the server when it receives one of those, with the action depending on the specific case. Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-04nfs41: only state manager sets NFS4CLNT_SESSION_SETUPAndy Adamson
Replace sync and async handlers setting of the NFS4CLNT_SESSION_SETUP bit with setting NFS4CLNT_CHECK_LEASE, and let the state manager decide to reset the session. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-04nfs41: nfs41: fix state manager deadlock in session resetAndy Adamson
If the session is reset during state recovery, the state manager thread can sleep on the slot_tbl_waitq causing a deadlock. Add a completion framework to the session. Have the state manager thread set a new session state (NFS4CLNT_SESSION_DRAINING) and wait for the session slot table to drain. Signal the state manager thread in nfs41_sequence_free_slot when the NFS4CLNT_SESSION_DRAINING bit is set and the session is drained. Reported-by: Trond Myklebust <trond@netapp.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-04nfs41: fix switch in nfs4_recovery_handle_errorAndy Adamson
Do not fall through and set NFS4CLNT_SESSION_RESET bit on NFS4ERR_EXPIRED Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-04nfs41: rename cl_state session SETUP bit to RESETAndy Adamson
The bit is no longer used for session setup, only for session reset. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-04nfs41: add create session into establish_clidAndy Adamson
Reported-by: Trond Myklebust <trond.myklebust@netapp.com> Resetting the clientid from the state manager could result in not confirming the clientid due to create session not being called. Move the create session call from the NFS4CLNT_SESSION_SETUP state manager initialize session case into the NFS4CLNT_LEASE_EXPIRED case establish_clid call. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03Merge branch 'devel' into linux-nextTrond Myklebust
2009-12-03NFSv4.1: Handle NFSv4.1 session errors in the lock recovery codeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03NFSv4: Fix up error handling in the state manager main loop.Trond Myklebust
The nfs4_state_manager should not be looking at the error values when deciding whether or not to loop round in order to handle a higher priority state recovery task. It should rather be looking at the clp->cl_state. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03NFSv4: Ensure the state manager handles NFS4ERR_NO_GRACE correctlyTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03NFSv4: The state manager shouldn't exit on errors that were handledTrond Myklebust
nfs4_recovery_handle_error() will correctly handle errors such as NFS4ERR_CB_PATH_DOWN, however because they are still passed back to the main loop in nfs4_state_manager(), they can cause the latter to exit prematurely. Fix this by letting nfs4_recovery_handle_error() change the error value in cases where there is no action required by the caller. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-03NFSv4: Fix up the callers of nfs4_state_end_reclaim_rebootTrond Myklebust
In practice, we need to ensure that we call nfs4_state_end_reclaim_reboot in 2 cases: - If we lose the lease while we were reclaiming state OR - After we're done with reboot recovery Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-09-22const: make file_lock_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-24NFSv4: Fix an infinite looping problem with the nfs4_state_managerTrond Myklebust
Commit 76db6d9500caeaa774a3e32a997eba30bbdc176b (nfs41: add session setup to the state manager) introduces an infinite loop possibility in the NFSv4 state manager. By first checking nfs4_has_session() before clearing the NFS4CLNT_SESSION_SETUP flag, it allows for a situation where someone sets that flag, but it never gets cleared, and so the state manager loops. In fact commit c3fad1b1aaf850bf692642642ace7cd0d64af0a3 (nfs41: add session reset to state manager) causes this to happen every time we get a network partition error. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-21NFSv4: Fix an Oops in nfs4_free_lock_stateTrond Myklebust
The oops http://www.kerneloops.org/raw.php?rawid=537858&msgid= appears to be due to the nfs4_lock_state->ls_state field being uninitialised. This happens if the call to nfs4_free_lock_state() is triggered at the end of nfs4_get_lock_state(). The fix is to move the initialisation of ls_state into the allocator. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-18Merge branch 'devel-for-2.6.31' into for-2.6.31Trond Myklebust
Conflicts: fs/nfs/client.c fs/nfs/super.c
2009-06-17NFS: Ensure we always hold the BKL when dereferencing inode->i_flockTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17NFSv4: Handle more errors when recovering open file and locking stateTrond Myklebust
It is possible for servers to return NFS4ERR_BAD_STATEID when the state management code is recovering locks or is reclaiming state when returning a delegation. Ensure that we handle that case. While we're at it, add in handlers for NFS4ERR_STALE, NFS4ERR_ADMIN_REVOKED, NFS4ERR_OPENMODE, NFS4ERR_DENIED and NFS4ERR_STALE_STATEID, since the protocol appears to allow for them too. Also handle ENOMEM... Finally, rather than add new NFSv4.0-specific errors and error handling into the generic delegation code, move that open file and locking state error handling into the NFSv4 layer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: increment_{open,lock}_seqidBenny Halevy
Unlike minorversion0, in nfsv4.1 the open and lock seqids need not be incremented by the client and should always be set to zero. This is implemented using a new nfs_rpc_ops methods - increment_open_seqid and increment_lock_seqid Signed-off-by: Rahul Iyer <iyer@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: check for session not minorversion] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: only retry EXCHANGE_ID on recoverable errorsAndy Adamson
Stops an infinite loop of EXCHANGE_ID. Signed-off-by: Andy Adamson <andros@netapp.com> [fixed checkpatch warnings] Signed-off-by: Benny Halevy <bhalevy@panasas.com>
2009-06-17nfs41: get_clid_cred for EXCHANGE_IDAndy Adamson
Unlike SETCLIENTID, EXCHANGE_ID requires a machine credential. Do not search for credentials other than the machine credential. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: add a get_clid_cred function to nfs4_state_recovery_opsAndy Adamson
EXCHANGE_ID has different credential requirements than SETCLIENTID. Prepare for a separate credential function. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: establish sessions-based clientidAndy Adamson
nfsv4.1 clientid is established via EXCHANGE_ID rather than SETCLIENTID{,_CONFIRM} This is implemented using a new establish_clid method in nfs4_state_recovery_ops. nfs41: establish clientid via exchange id only if cred != NULL >From 2.6.26 reclaimer() uses machine cred for setting up the client id therefore it is never expected to be NULL. Signed-off-by: Rahul Iyer <iyer@netapp.com> [removed dprintk] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: lease renewal] [revamped patch for new nfs4_state_manager design] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: introduce get_state_renewal_credAndy Adamson
Use the machine cred for sending SEQUENCE to renew the client's lease. [revamp patch for new state management design starting 2.6.29] [nfs41: support minorversion 1 for nfs4_check_lease] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: get cred in exchange_id when cred arg is NULL] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: use cl_machined_cred instead of cl_ex_cred] Since EXCHANGE_ID insists on using the machine credential, cl_ex_cred is not needed. nfs4_proc_exchange_id() is only called if the machine credential is available. Remove the credential logic from nfs4_proc_exchange_id. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: support minorversion 1 for nfs4_check_leaseBenny Halevy
[moved nfs4_get_renew_cred related changes to "nfs41: introduce get_state_renewal_cred"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: add session reset to state managerAndy Adamson
Move the code to reset a session from the session_reclaimer to the nfs4_state_manager. Destroy the session, and create a new one. Treat NFS4ERR_BADSESSION and NFS4ERR_DEADSESSION as a successful nfs4_proc_destroy_session. Signal nfs4_proc_create_session that this is a session reset so that the session slot table is re-used. If the clientid is stale, set both NFS4CLNT_LEASE_EXPIRED and NFS4CLNT_SESSION_SETUP bits and retry. Use a switch statement in nfs4_session_recovery_handle_error for future patche which will add handling for other errors. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: session reset in nfs4_recovery_handle_error] Signed-off-by: Andy Adamson <andros@netapp.com> [nfs41: reset session on nfs4_do_reclaim session reset error] If nfs4_do_reclaim gets a session reset error, nfs4_recovery_handle_error will set the NFS4CLNT_SESSION_SETUP bit, and the state manager should continue processing to reset the session. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [move nfs4_proc_destroy_session declaration here] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: add session setup to the state managerAndy Adamson
At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules the nfs4_state_manager and waits for it to complete. Place the session setup after the clientid establishment in nfs4_state_manager so that the session is setup right after the clientid has been established without rescheduling the state manager. Unlike nfsv4.0, the nfs_client struct is not ready to use until the session has been established. Postpone marking the nfs_client struct to NFS_CS_READY until after a successful CREATE_SESSION call so that other threads cannot use the client until the session is established. If the EXCHANGE_ID call fails and the session has not been setup (the NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return. If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID which could occur due to server reboot or network partition inbetween the EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and NFS4CLNT_SESSION_SETUP bits and try again. If the CREATE_SESSION call fails with other errors, mark the client with the error and return. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup] On session setup, the CREATE_SESSION reply races with the server back channel probe which needs to succeed to setup the back channel. Set a new cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call and add it as a valid state to nfs_find_client so that the client back channel can find the nfs_client struct and won't drop the server backchannel probe. Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only sets NFS_CS_READY is unchanged. Adjust waiting on the nfs_client_active_wq accordingly. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING] Signed-off-by: Andy Adamson <andros@netapp.com> [nfs41: set NFS_CL_SESSION_INITING in alloc_session] Signed-off-by: Andy Adamson <andros@netapp.com> [nfs41: move session setup into a function] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [moved nfs4_proc_create_session declaration here] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-06-17nfs41: translate NFS4ERR_MINOR_VERS_MISMATCH to EPROTONOSUPPORTBenny Halevy
To be returned to the mount command when trying to mount a v4 server using minorversion 1. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28NFS: Start PF_INET6 callback listener only if IPv6 support is availableChuck Lever
Apparently a lot of people need to disable IPv6 completely on their distributor-built systems, which have CONFIG_IPV6_MODULE enabled at build time. They do this by blacklisting the ipv6.ko module. This causes the creation of the NFSv4 callback service listener to fail if CONFIG_IPV6_MODULE is set, but the module cannot be loaded. Now that the kernel's PF_INET6 RPC listeners are completely separate from PF_INET listeners, we can always start PF_INET. Then the NFS client can try to start a PF_INET6 listener, but it isn't required to be available. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23NFSv4: Convert the open and close ops to use fmodeTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 00:32:23 +0000