Age | Commit message (Collapse) | Author |
|
The client was freeing the nfs4_ff_layout_ds, but not the contained
nfs4_ff_ds_version array.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the layout has expired due to a fencing event, then we should not
attempt to commit to the DS.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Upon receiving a stateid error such as BAD_STATEID, the client
should retry the operation against the MDS before deciding to
do stateid recovery.
Previously, the code would initiate state recovery and it could
lead to a race in a state manager that could chose an incorrect
recovery method which would lead to the EIO failure for the
application.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The
caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime,
but obviously we intended to set an error code here.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Layoutstats is always desirable when using the flexfiles driver, so
we should enable it if that driver is being loaded. It is safe to do
so, because even when the mount specifies NFSv4.1, we will turn it
off if the server tells us it is unsupported.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the attempt to write through pNFS fails, we need to use the same
failure semantics as for the read path: If the FF_FLAGS_NO_IO_THRU_MDS
flag is set or we have sufficient valid DSes, then we must retry through
pNFS
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If we have a layout segment cached in pgio->pg_lseg, we should check it
for validity before reusing it in a new RPC request. Otherwise, if we
recoalesce, we can end up looping forever.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The check in nfs4_ff_layout_prepare_ds() seems to be missing.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: a33e4b036d461 ("pNFS: return status from nfs4_pnfs_ds_connect")
Cc: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # v4.11
|
|
Flexfilelayout supports data servers which talk NFS v3 and v4.{0,1,2}.
However, this code path is disabled and v3 only servers are accepted.
This change removes this limitation.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull NFS client fixes from Anna Schumaker:
"Here are a few more bugfixes that came in over the last couple of
weeks. Most of these fix various hangs and loops that people found,
but we also had a few error handling fixes.
Stable Bugfixes:
- fix infinite loop on BAD_STATEID error
Other Bugfixes:
- fix old dentry rehash after move
- fix pnfs GETDEVINFO hangs
- fix pnfs fallback to MDS on commit errors
- fix flexfiles kernel oops"
* tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type
NFSv4.1 fix infinite loop on IO BAD_STATEID error
PNFS fix fallback to MDS if got error on commit to DS
NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes
NFS store nfs4_deviceid in struct nfs4_filelayout_segment
NFS cleanup struct nfs4_filelayout_segment
NFS: Fix old dentry rehash after move
|
|
this fix aims to fix dereferencing of a mirror in an error state when MDS
returns unsupported DS type (IOW, not v3), which causes the following oops:
[ 220.370709] BUG: unable to handle kernel NULL pointer dereference at 0000000000000065
[ 220.370842] IP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[ 220.370920] PGD 0
[ 220.370972] Oops: 0000 [#1] SMP
[ 220.371013] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth nfs_layout_flexfiles rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security ebtable_filter ebtables ip6table_filter ip6_tables binfmt_misc intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel btrfs kvm arc4 snd_hda_codec_hdmi iwldvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate mac80211 xor uvcvideo
[ 220.371814] videobuf2_vmalloc videobuf2_memops snd_hda_codec_idt mei_wdt videobuf2_v4l2 snd_hda_codec_generic iTCO_wdt ppdev videobuf2_core iTCO_vendor_support dell_rbtn dell_wmi iwlwifi sparse_keymap dell_laptop dell_smbios snd_hda_intel dcdbas videodev snd_hda_codec dell_smm_hwmon snd_hda_core media cfg80211 intel_uncore snd_hwdep raid6_pq snd_seq intel_rapl_perf snd_seq_device joydev i2c_i801 rfkill lpc_ich snd_pcm parport_pc mei_me parport snd_timer dell_smo8800 mei snd shpchp soundcore tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915 nouveau mxm_wmi ttm i2c_algo_bit drm_kms_helper crc32c_intel e1000e drm sdhci_pci firewire_ohci sdhci serio_raw mmc_core firewire_core ptp crc_itu_t pps_core wmi fjes video
[ 220.372568] CPU: 7 PID: 4988 Comm: cat Not tainted 4.10.5-200.fc25.x86_64 #1
[ 220.372647] Hardware name: Dell Inc. Latitude E6520/0J4TFW, BIOS A06 07/11/2011
[ 220.372729] task: ffff94791f6ea580 task.stack: ffffb72b88c0c000
[ 220.372802] RIP: 0010:ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles]
[ 220.372883] RSP: 0018:ffffb72b88c0f970 EFLAGS: 00010246
[ 220.372945] RAX: 0000000000000000 RBX: ffff9479015ca600 RCX: ffffffffffffffed
[ 220.373025] RDX: ffffffffffffffed RSI: ffff9479753dc980 RDI: 0000000000000000
[ 220.373104] RBP: ffffb72b88c0f988 R08: 000000000001c980 R09: ffffffffc0ea6112
[ 220.373184] R10: ffffef17477d9640 R11: ffff9479753dd6c0 R12: ffff9479211c7440
[ 220.373264] R13: ffff9478f45b7790 R14: 0000000000000001 R15: ffff9479015ca600
[ 220.373345] FS: 00007f555fa3e700(0000) GS:ffff9479753c0000(0000) knlGS:0000000000000000
[ 220.373435] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 220.373506] CR2: 0000000000000065 CR3: 0000000196044000 CR4: 00000000000406e0
[ 220.373586] Call Trace:
[ 220.373627] nfs4_ff_layout_prepare_ds+0x5e/0x200 [nfs_layout_flexfiles]
[ 220.373708] ff_layout_pg_init_read+0x81/0x160 [nfs_layout_flexfiles]
[ 220.373806] __nfs_pageio_add_request+0x11f/0x4a0 [nfs]
[ 220.373886] ? nfs_create_request.part.14+0x37/0x330 [nfs]
[ 220.373967] nfs_pageio_add_request+0xb2/0x260 [nfs]
[ 220.374042] readpage_async_filler+0xaf/0x280 [nfs]
[ 220.374103] read_cache_pages+0xef/0x1b0
[ 220.374166] ? nfs_read_completion+0x210/0x210 [nfs]
[ 220.374239] nfs_readpages+0x129/0x200 [nfs]
[ 220.374293] __do_page_cache_readahead+0x1d0/0x2f0
[ 220.374352] ondemand_readahead+0x17d/0x2a0
[ 220.374403] page_cache_sync_readahead+0x2e/0x50
[ 220.374460] generic_file_read_iter+0x6c8/0x950
[ 220.374532] ? nfs_mapping_need_revalidate_inode+0x17/0x40 [nfs]
[ 220.374617] nfs_file_read+0x6e/0xc0 [nfs]
[ 220.374670] __vfs_read+0xe2/0x150
[ 220.374715] vfs_read+0x96/0x130
[ 220.374758] SyS_read+0x55/0xc0
[ 220.374801] entry_SYSCALL_64_fastpath+0x1a/0xa9
[ 220.374856] RIP: 0033:0x7f555f570bd0
[ 220.374900] RSP: 002b:00007ffeb73e1b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 220.374986] RAX: ffffffffffffffda RBX: 00007f555f839ae0 RCX: 00007f555f570bd0
[ 220.375066] RDX: 0000000000020000 RSI: 00007f555fa41000 RDI: 0000000000000003
[ 220.375145] RBP: 0000000000021010 R08: ffffffffffffffff R09: 0000000000000000
[ 220.375226] R10: 00007f555fa40010 R11: 0000000000000246 R12: 0000000000022000
[ 220.375305] R13: 0000000000021010 R14: 0000000000001000 R15: 0000000000002710
[ 220.375386] Code: 66 66 90 55 48 89 e5 41 54 53 49 89 fc 48 83 ec 08 48 85 f6 74 2e 48 8b 4e 30 48 89 f3 48 81 f9 00 f0 ff ff 77 1e 48 85 c9 74 15 <48> 83 79 78 00 b8 01 00 00 00 74 2c 48 83 c4 08 5b 41 5c 5d c3
[ 220.375653] RIP: ff_layout_mirror_valid+0x2d/0x110 [nfs_layout_flexfiles] RSP: ffffb72b88c0f970
[ 220.375748] CR2: 0000000000000065
[ 220.403538] ---[ end trace bcdca752211b7da9 ]---
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client fixes from Anna Schumaker:
"We have a handful of stable fixes to fix kernel warnings and other
bugs that have been around for a while. We've also found a few other
reference counting bugs and memory leaks since the initial 4.11 pull.
Stable Bugfixes:
- Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
- Prevent a double free in async nfs4_exchange_id()
- Squelch a kbuild sparse complaint for xprtrdma
Other Bugfixes:
- Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
- Fix a reference leak that causes kernel warnings
- Make nfs4_cb_sv_ops static to fix a sparse warning
- Respect a server's max size in CREATE_SESSION
- Handle errors from nfs4_pnfs_ds_connect
- Flexfiles layout shouldn't mark devices as unavailable"
* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
pNFS: return status from nfs4_pnfs_ds_connect
NFSv4.1 respect server's max size in CREATE_SESSION
NFS prevent double free in async nfs4_exchange_id
nfs: make nfs4_cb_sv_ops static
xprtrdma: Squelch kbuild sparse complaint
NFS: fix the fault nrequests decreasing for nfs_inode COPY
NFSv4: fix a reference leak caused WARNING messages
nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME
|
|
The flexfiles layout should never mark a device unavailable.
Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call
directly from files layout where it's still needed.
The flexfiles driver still handles marked devices in error paths, but will
now print a rate limited warning.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.
This checks that the rpc_create succeeded and returns the error to the
caller.
When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Stable bugfixes:
- NFSv4: Fix memory and state leak in _nfs4_open_and_get_state
- xprtrdma: Fix Read chunk padding
- xprtrdma: Per-connection pad optimization
- xprtrdma: Disable pad optimization by default
- xprtrdma: Reduce required number of send SGEs
- nlm: Ensure callback code also checks that the files match
- pNFS/flexfiles: If the layout is invalid, it must be updated before
retrying
- NFSv4: Fix reboot recovery in copy offload
- Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION
replies to OP_SEQUENCE"
- NFSv4: fix getacl head length estimation
- NFSv4: fix getacl ERANGE for sum ACL buffer sizes
Features:
- Add and use dprintk_cont macros
- Various cleanups to NFS v4.x to reduce code duplication and
complexity
- Remove unused cr_magic related code
- Improvements to sunrpc "read from buffer" code
- Clean up sunrpc timeout code and allow changing TCP timeout
parameters
- Remove duplicate mw_list management code in xprtrdma
- Add generic functions for encoding and decoding xdr streams
Bugfixes:
- Clean up nfs_show_mountd_netid
- Make layoutreturn_ops static and use NULL instead of 0 to fix
sparse warnings
- Properly handle -ERESTARTSYS in nfs_rename()
- Check if register_shrinker() failed during rpcauth_init()
- Properly clean up procfs/pipefs entries
- Various NFS over RDMA related fixes
- Silence unititialized variable warning in sunrpc"
* tag 'nfs-for-4.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (64 commits)
NFSv4: fix getacl ERANGE for some ACL buffer sizes
NFSv4: fix getacl head length estimation
Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE"
NFSv4: Fix reboot recovery in copy offload
pNFS/flexfiles: If the layout is invalid, it must be updated before retrying
NFSv4: Clean up owner/group attribute decode
SUNRPC: Add a helper function xdr_stream_decode_string_dup()
NFSv4: Remove bogus "struct nfs_client" argument from decode_ace()
NFSv4: Fix the underestimation of delegation XDR space reservation
NFSv4: Replace callback string decode function with a generic
NFSv4: Replace the open coded decode_opaque_inline() with the new generic
NFSv4: Replace ad-hoc xdr encode/decode helpers with xdr_stream_* generics
SUNRPC: Add generic helpers for xdr_stream encode/decode
sunrpc: silence uninitialized variable warning
nlm: Ensure callback code also checks that the files match
sunrpc: Allow xprt->ops->timer method to sleep
xprtrdma: Refactor management of mw_list field
xprtrdma: Handle stale connection rejection
xprtrdma: Properly recover FRWRs with in-flight FASTREG WRs
xprtrdma: Shrink send SGEs array
...
|
|
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.
Use BUILD_BUG_ON in a couple ATM drivers.
In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement. Hopefully this patch inspires
someone else to trim vsprintf.c more.
Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we see that our pNFS READ/WRITE/COMMIT operation failed, but we
also see that our layout segment is no longer valid, then we need to
get a new layout segment before retrying.
Fixes: 90816d1ddacf ("NFSv4.1/flexfiles: Don't mark the entire deviceid...")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Fixes the following sparse warning:
fs/nfs/flexfilelayout/flexfilelayout.c:2114:34: warning:
symbol 'layoutreturn_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This does the right thing depending on if we have a session, rather than
needing to handle this manually in multiple places.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
No point in going through loops and hoops instead of just comparing the
values.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
Instead of marking a device inactive, remove it from the cache entirely.
Flexfiles has a way to report errors back to the server, so we don't want
to stop devices from being tried again for 120 seconds.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The flexfiles client can piggyback both layout errors and layoutstats
as part of the layoutreturn. Both these payloads can get large, with
20 layout error entries taking up about 1.2K, and 4 layoutstats entries
taking up another 1K.
This patch allows a maximum payload of 4k by allocating a full page.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We encountered a deadlock where the SEQUENCE that accompanied the
LAYOUTGET triggered a session drain, while ff_layout_alloc_lseg
triggered a GETDEVICEINFO. The GETDEVICEINFO hung waiting for the
session drain, while the LAYOUTGET held the slot waiting for
alloc_lseg to finish.
Avoid this by moving the call to nfs4_find_get_deviceid out of
ff_layout_alloc_lseg and into nfs4_ff_layout_prepare_ds.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
[dros@primarydata.com: pNFS/flexfiles: fix races in ff_layout_mirror_valid]
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
When we're merging an old entry into our new entry, we want to ensure that
we add the list entry in the correct place.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Add the ability to send an array of layoutstats entries as part of
layoutreturn.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Need to lock while reading in order to ensure 64-bit reads are correct.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Add the layout error payload to the flexfiles layoutreturn private
data, and set up the encoding mechanisms. This is a refactoring in
preparation for adding the layout iostats payload.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If there have been no reads or writes to a given mirror since the last
layoutstats update, then don't resend the same data.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the list of mirrors is empty, then don't send an RPC call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
This parameter hasn't been used since f8407299 (Linux 3.11-rc2), so
let's remove it from this function and callers.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The parameter is already present in the "args" structure.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Both pnfs.c and the flexfiles code have their own versions of the
range intersection testing, and the "end_offset" helper.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We must not call nfs_pageio_init_read() on a new nfs_pageio_descriptor
while holding a reference to a layout segment, as that can deadlock
pnfs_update_layout().
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.0+
|
|
Allow the callers of nfs_remove_bad_delegation() to specify the stateid
that needs to be marked as bad.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or
ff_layout_pg_init_write, then we currently end up clearing the layout
segment carried by the struct nfs_pageio_descriptor, causing an Oops
when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist.
The fix is to ensure we return the layout and then retry.
Fixes: 446ca2195303 ("pNFS/flexfiles: When initing reads or writes, we...")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Prior to this patch, the retrans value was set at 5, meaning that we
could see a maximum retransmission timeout value of more than 6 minutes.
That's a tad high for NFSv3 where the protocol does allow the server to
drop requests at any time.
Since this is a data channel, let's just set retrans to 0, and the default
timeout to 60s. The user can continue to adjust these defaults using the
dataserver_retrans and dataserver_timeo module parameters.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Putting the periodicity timer in the mirror instances is causing
non-scalable reporting behaviour and missed reporting intervals.
When you recall layouts and/or implement client side mirroring, it
leads to consecutive reports with only a few ms between RPC calls.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: d0379a5d066a9 ("pNFS/flexfiles: Support server-supplied...")
|
|
So ensure that we mark the layout for commit once the write is done,
and then ensure that the commit to ds is finished before sending
layoutcommit.
Note that by doing this, we're able to optimise away the commit
for the case of servers that don't need layoutcommit in order to
return updated attributes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Let's just have one place where we check ff_layout_need_layoutcommit().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We should always do a layoutcommit after commit to DS, except if
the layout segment we're using has set FF_FLAGS_NO_LAYOUTCOMMIT.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
As flexfiles has FF_FLAGS_NO_READ_IO, there is a need to generically
support enforcing that a IOMODE_RW segment will not allow READ I/O.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
reading is disabled
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The mds can inform the client not to use the IOMODE_RW layout
segment for doing READs. I.e., it is basically a
IOMODE_WRITE layout segment.
It would do this to not interfere with the WRITEs.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Setting just the NFS_LAYOUT_RETURN_REQUESTED flag doesn't do anything,
unless there are lsegs that are also being marked for return. At the
point where that happens this flag is also set, so these set_bit calls
don't do anything useful.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|