| Age | Commit message (Collapse) | Author |
|---|
|
Commit dab741e0e02b ("Add a "nosymfollow" mount option.") added support
for the "nosymfollow" mount option allowing to block following symlinks
when resolving paths. The mount option so far was only available in the
old mount api. Make it available in the new mount api as well. Bonus is
that it can be applied to a whole subtree not just a single mount.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <zwisler@google.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
We currently don't have any filesystems that support idmapped mounts
which are mountable inside a user namespace. That was a deliberate
decision for now as a userns root can just mount the filesystem
themselves. So enforce this restriction explicitly until there's a real
use-case for this. This way we can notice it and will have a chance to
adapt and audit our translation helpers and fstests appropriately if we
need to support such filesystems.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
Suggested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Fix kernel-doc warnings in fs/namespace.c:
./fs/namespace.c:1379: warning: Function parameter or member 'm' not described in 'may_umount_tree'
./fs/namespace.c:1379: warning: Excess function parameter 'mnt' description in 'may_umount_tree'
./fs/namespace.c:1950: warning: Function parameter or member 'path' not described in 'clone_private_mount'
Also convert path_is_mountpoint() comments to kernel-doc.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Allegedly-acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210318025227.4162-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
|
|
Introduce a new mount bind mount property to allow idmapping mounts. The
MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall
together with a file descriptor referring to a user namespace.
The user namespace referenced by the namespace file descriptor will be
attached to the bind mount. All interactions with the filesystem going
through that mount will be mapped according to the mapping specified in
the user namespace attached to it.
Using user namespaces to mark mounts means we can reuse all the existing
infrastructure in the kernel that already exists to handle idmappings
and can also use this for permission checking to allow unprivileged user
to create idmapped mounts in the future.
Idmapping a mount is decoupled from the caller's user and mount
namespace. This means idmapped mounts can be created in the initial
user namespace which is an important use-case for systemd-homed,
portable usb-sticks between systems, sharing data between the initial
user namespace and unprivileged containers, and other use-cases that
have been brought up. For example, assume a home directory where all
files are owned by uid and gid 1000 and the home directory is brought to
a new laptop where the user has id 12345. The system administrator can
simply create a mount of this home directory with a mapping of
1000:12345:1 and other mappings to indicate the ids should be kept.
(With this it is e.g. also possible to create idmapped mounts on the
host with an identity mapping 1:1:100000 where the root user is not
mapped. A user with root access that e.g. has been pivot rooted into
such a mount on the host will be not be able to execute, read, write, or
create files as root.)
Given that mapping a mount is decoupled from the caller's user namespace
a sufficiently privileged process such as a container manager can set up
an idmapped mount for the container and the container can simply pivot
root to it. There's no need for the container to do anything. The mount
will appear correctly mapped independent of the user namespace the
container uses. This means we don't need to mark a mount as idmappable.
In order to create an idmapped mount the caller must currently be
privileged in the user namespace of the superblock the mount belongs to.
Once a mount has been idmapped we don't allow it to change its mapping.
This keeps permission checking and life-cycle management simple. Users
wanting to change the idmapped can always create a new detached mount
with a different idmapping.
Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
This implements the missing mount_setattr() syscall. While the new mount
api allows to change the properties of a superblock there is currently
no way to change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on. In addition the old
mount api has the restriction that mount options cannot be applied
recursively. This hasn't changed since changing mount options on a
per-mount basis was implemented in [1] and has been a frequent request
not just for convenience but also for security reasons. The legacy
mount syscall is unable to accommodate this behavior without introducing
a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND |
MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost
mount. Changing MS_REC to apply to the whole mount tree would mean
introducing a significant uapi change and would likely cause significant
regressions.
The new mount_setattr() syscall allows to recursively clear and set
mount options in one shot. Multiple calls to change mount options
requesting the same changes are idempotent:
int mount_setattr(int dfd, const char *path, unsigned flags,
struct mount_attr *uattr, size_t usize);
Flags to modify path resolution behavior are specified in the @flags
argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW,
and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to
restrict path resolution as introduced with openat2() might be supported
in the future.
The mount_setattr() syscall can be expected to grow over time and is
designed with extensibility in mind. It follows the extensible syscall
pattern we have used with other syscalls such as openat2(), clone3(),
sched_{set,get}attr(), and others.
The set of mount options is passed in the uapi struct mount_attr which
currently has the following layout:
struct mount_attr {
__u64 attr_set;
__u64 attr_clr;
__u64 propagation;
__u64 userns_fd;
};
The @attr_set and @attr_clr members are used to clear and set mount
options. This way a user can e.g. request that a set of flags is to be
raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in
@attr_set while at the same time requesting that another set of flags is
to be lowered such as removing noexec from a mount tree by specifying
MOUNT_ATTR_NOEXEC in @attr_clr.
Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0,
not a bitmap, users wanting to transition to a different atime setting
cannot simply specify the atime setting in @attr_set, but must also
specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that
MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set
can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in
@attr_clr.
The @propagation field lets callers specify the propagation type of a
mount tree. Propagation is a single property that has four different
settings and as such is not really a flag argument but an enum.
Specifically, it would be unclear what setting and clearing propagation
settings in combination would amount to. The legacy mount() syscall thus
forbids the combination of multiple propagation settings too. The goal
is to keep the semantics of mount propagation somewhat simple as they
are overly complex as it is.
The @userns_fd field lets user specify a user namespace whose idmapping
becomes the idmapping of the mount. This is implemented and explained in
detail in the next patch.
[1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add a simple helper to translate uapi MOUNT_ATTR_* flags to MNT_* flags
which we will use in follow-up patches too.
Link: https://lore.kernel.org/r/20210121131959.646623-34-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
When a mount is marked read-only we set MNT_WRITE_HOLD on it if there
aren't currently any active writers. Split this logic out into simple
helpers that we can use in follow-up patches.
Link: https://lore.kernel.org/r/20210121131959.646623-33-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
do_reconfigure_mnt() used to take the down_write(&sb->s_umount) lock
which seems unnecessary since we're not changing the superblock. We're
only checking whether it is already read-only. Setting other mount
attributes is protected by lock_mount_hash() afaict and not by s_umount.
The history of down_write(&sb->s_umount) lock being taken when setting
mount attributes dates back to the introduction of MNT_READONLY in [2].
This introduced the concept of having read-only mounts in contrast to
just having a read-only superblock. When it got introduced it was simply
plumbed into do_remount() which already took down_write(&sb->s_umount)
because it was only used to actually change the superblock before [2].
Afaict, it would've already been possible back then to only use
down_read(&sb->s_umount) for MS_BIND | MS_REMOUNT since actual mount
options were protected by the vfsmount lock already. But that would've
meant special casing the locking for MS_BIND | MS_REMOUNT in
do_remount() which people might not have considered worth it.
Then in [1] MS_BIND | MS_REMOUNT mount option changes were split out of
do_remount() into do_reconfigure_mnt() but the down_write(&sb->s_umount)
lock was simply copied over.
Now that we have this be a separate helper only take the
down_read(&sb->s_umount) lock since we're only interested in checking
whether the super block is currently read-only and blocking any writers
from changing it. Essentially, checking that the super block is
read-only has the advantage that we can avoid having to go into the
slowpath and through MNT_WRITE_HOLD and can simply set the read-only
flag on the mount in set_mount_attributes().
[1]: commit 43f5e655eff7 ("vfs: Separate changing mount flags full remount")
[2]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount")
Link: https://lore.kernel.org/r/20210121131959.646623-32-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The lock_mount_hash() and unlock_mount_hash() helpers are never called
outside a single file. Remove them from the header and make them static
to reflect this fact. There's no need to have them callable from other
places right now, as Christoph observed.
Link: https://lore.kernel.org/r/20210121131959.646623-31-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Changing mount options always ends up taking lock_mount_hash() but when
MNT_READONLY is requested and neither the mount nor the superblock are
MNT_READONLY we end up taking the lock, dropping it, and retaking it to
change the other mount attributes. Instead, let's acquire the lock once
when changing the mount attributes. This simplifies the locking in these
codepath, makes them easier to reason about and avoids having to
reacquire the lock right after dropping it.
Link: https://lore.kernel.org/r/20210121131959.646623-30-christian.brauner@ubuntu.com
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
In order to support per-mount idmappings vfsmounts are marked with user
namespaces. The idmapping of the user namespace will be used to map the
ids of vfs objects when they are accessed through that mount. By default
all vfsmounts are marked with the initial user namespace. The initial
user namespace is used to indicate that a mount is not idmapped. All
operations behave as before.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users to
setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
Later patches enforce that once a mount has been idmapped it can't be
remapped. This keeps permission checking and life-cycle management
simple. Users wanting to change the idmapped can always create a new
detached mount with a different idmapping.
Add a new mnt_userns member to vfsmount and two simple helpers to
retrieve the mnt_userns from vfsmounts and files.
The idea to attach user namespaces to vfsmounts has been floated around
in various forms at Linux Plumbers in ~2018 with the original idea
tracing back to a discussion in 2017 at a conference in St. Petersburg
between Christoph, Tycho, and myself.
Link: https://lore.kernel.org/r/20210121131959.646623-2-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Unfortunately, there's userland code that used to rely upon these
checks being done before anything else to check for UMOUNT_NOFOLLOW
support. That broke in 41525f56e256 ("fs: refactor ksys_umount").
Separate those from the rest of checks and move them to ksys_umount();
unlike everything else in there, this can be sanely done there.
Reported-by: Sargun Dhillon <sargun@sargun.me>
Fixes: 41525f56e256 ("fs: refactor ksys_umount")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There's no need for mnt_want_write_file() to increment mnt_writers when
the file is already open for writing, provided that
mnt_drop_write_file() is changed to conditionally decrement it.
We seem to have ended up in the current situation because
mnt_want_write_file() used to be paired with mnt_drop_write(), due to
mnt_drop_write_file() not having been added yet. So originally
mnt_want_write_file() had to always increment mnt_writers.
But later mnt_drop_write_file() was added, and all callers of
mnt_want_write_file() were paired with it. This makes the compatibility
between mnt_want_write_file() and mnt_drop_write() no longer necessary.
Therefore, make __mnt_want_write_file() and __mnt_drop_write_file() skip
incrementing mnt_writers on files already open for writing. This
removes the only caller of mnt_clone_write(), so remove that too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted patches from previous cycle(s)..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix hostfs_open() use of ->f_path.dentry
Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
fs/namespace.c: WARN if mnt_count has become negative
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
"This contains several fixes which felt worth being combined into a
single branch:
- Use put_nsproxy() instead of open-coding it switch_task_namespaces()
- Kirill's work to unify lifecycle management for all namespaces. The
lifetime counters are used identically for all namespaces types.
Namespaces may of course have additional unrelated counters and
these are not altered. This work allows us to unify the type of the
counters and reduces maintenance cost by moving the counter in one
place and indicating that basic lifetime management is identical
for all namespaces.
- Peilin's fix adding three byte padding to Dmitry's
PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak.
- Two smal patches to convert from the /* fall through */ comment
annotation to the fallthrough keyword annotation which I had taken
into my branch and into -next before df561f6688fe ("treewide: Use
fallthrough pseudo-keyword") made it upstream which fixed this
tree-wide.
Since I didn't want to invalidate all testing for other commits I
didn't rebase and kept them"
* tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
nsproxy: use put_nsproxy() in switch_task_namespaces()
sys: Convert to the new fallthrough notation
signal: Convert to the new fallthrough notation
time: Use generic ns_common::count
cgroup: Use generic ns_common::count
mnt: Use generic ns_common::count
user: Use generic ns_common::count
pid: Use generic ns_common::count
ipc: Use generic ns_common::count
uts: Use generic ns_common::count
net: Use generic ns_common::count
ns: Add a common refcount into ns_common
ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()
|
|
Missing calls to mntget() (or equivalently, too many calls to mntput())
are hard to detect because mntput() delays freeing mounts using
task_work_add(), then again using call_rcu(). As a result, mnt_count
can often be decremented to -1 without getting a KASAN use-after-free
report. Such cases are still bugs though, and they point to real
use-after-frees being possible.
For an example of this, see the bug fixed by commit 1b0b9cc8d379
("vfs: fsmount: add missing mntget()"), discussed at
https://lkml.kernel.org/linux-fsdevel/20190605135401.GB30925@xxxxxxxxxxxxxxxxxxxxxxxxx/T/#u.
This bug *should* have been trivial to find. But actually, it wasn't
found until syzkaller happened to use fchdir() to manipulate the
reference count just right for the bug to be noticeable.
Address this by making mntput_no_expire() issue a WARN if mnt_count has
become negative.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place (the largest group here is
Christoph's stat cleanups)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove KSTAT_QUERY_FLAGS
fs: remove vfs_stat_set_lookup_flags
fs: move vfs_fstatat out of line
fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat
fs: remove vfs_statx_fd
fs: omfs: use kmemdup() rather than kmalloc+memcpy
[PATCH] reduce boilerplate in fsid handling
fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS
selftests: mount: add nosymfollow tests
Add a "nosymfollow" mount option.
|
|
A previous commit changed the notification mode from true/false to an
int, allowing notify-no, notify-yes, or signal-notify. This was
backwards compatible in the sense that any existing true/false user
would translate to either 0 (on notification sent) or 1, the latter
which mapped to TWA_RESUME. TWA_SIGNAL was assigned a value of 2.
Clean this up properly, and define a proper enum for the notification
mode. Now we have:
- TWA_NONE. This is 0, same as before the original change, meaning no
notification requested.
- TWA_RESUME. This is 1, same as before the original change, meaning
that we use TIF_NOTIFY_RESUME.
- TWA_SIGNAL. This uses TIF_SIGPENDING/JOBCTL_TASK_WORK for the
notification.
Clean up all the callers, switching their 0/1/false/true to using the
appropriate TWA_* mode for notifications.
Fixes: e91b48162332 ("task_work: teach task_work_add() to do signal_wake_up()")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat mount cleanups from Al Viro:
"The last remnants of mount(2) compat buried by Christoph.
Buried into NFS, that is.
Generally I'm less enthusiastic about "let's use in_compat_syscall()
deep in call chain" kind of approach than Christoph seems to be, but
in this case it's warranted - that had been an NFS-specific wart,
hopefully not to be repeated in any other filesystems (read: any new
filesystem introducing non-text mount options will get NAKed even if
it doesn't mess the layout up).
IOW, not worth trying to grow an infrastructure that would avoid that
use of in_compat_syscall()..."
* 'compat.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: remove compat_sys_mount
fs,nfs: lift compat nfs4 mount data handling into the nfs code
nfs: simplify nfs4_parse_monolithic
|
|
compat_sys_mount is identical to the regular sys_mount now, so remove it
and use the native version everywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The copy_mount_options() function takes a user pointer argument but no
size and it tries to read up to a PAGE_SIZE. However, copy_from_user()
is not guaranteed to return all the accessible bytes if, for example,
the access crosses a page boundary and gets a fault on the second page.
To work around this, the current copy_mount_options() implementation
performs two copy_from_user() passes, first to the end of the current
page and the second to what's left in the subsequent page.
On arm64 with MTE enabled, access to a user page may trigger a fault
after part of the buffer in a page has been copied (when the user
pointer tag, bits 56-59, no longer matches the allocation tag stored in
memory). Allow copy_mount_options() to handle such intra-page faults by
resorting to byte at a time copy in case of copy_from_user() failure.
Note that copy_from_user() handles the zeroing of the kernel buffer in
case of error.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
|
|
For mounts that have the new "nosymfollow" option, don't follow symlinks
when resolving paths. The new option is similar in spirit to the
existing "nodev", "noexec", and "nosuid" options, as well as to the
LOOKUP_NO_SYMLINKS resolve flag in the openat2(2) syscall. Various BSD
variants have been supporting the "nosymfollow" mount option for a long
time with equivalent implementations.
Note that symlinks may still be created on file systems mounted with
the "nosymfollow" option present. readlink() remains functional, so
user space code that is aware of symlinks can still choose to follow
them explicitly.
Setting the "nosymfollow" mount option helps prevent privileged
writers from modifying files unintentionally in case there is an
unexpected link along the accessed path. The "nosymfollow" option is
thus useful as a defensive measure for systems that need to deal with
untrusted file systems in privileged contexts.
More information on the history and motivation for this patch can be
found here:
https://sites.google.com/a/chromium.org/dev/chromium-os/chromiumos-design-docs/hardening-against-malicious-stateful-data#TOC-Restricting-symlink-traversal
Signed-off-by: Mattias Nissler <mnissler@chromium.org>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Switch over mount namespaces to use the newly introduced common lifetime
counter.
Currently every namespace type has its own lifetime counter which is stored
in the specific namespace struct. The lifetime counters are used
identically for all namespaces types. Namespaces may of course have
additional unrelated counters and these are not altered.
This introduces a common lifetime counter into struct ns_common. The
ns_common struct encompasses information that all namespaces share. That
should include the lifetime counter since its common for all of them.
It also allows us to unify the type of the counters across all namespaces.
Most of them use refcount_t but one uses atomic_t and at least one uses
kref. Especially the last one doesn't make much sense since it's just a
wrapper around refcount_t since 2016 and actually complicates cleanup
operations by having to use container_of() to cast the correct namespace
struct out of struct ns_common.
Having the lifetime counter for the namespaces in one place reduces
maintenance cost. Not just because after switching all namespaces over we
will have removed more code than we added but also because the logic is
more easily understandable and we indicate to the user that the basic
lifetime requirements for all namespaces are currently identical.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/159644980287.604812.761686947449081169.stgit@localhost.localdomain
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Pull mount leak fix from Al Viro:
"Regression fix for the syscalls-for-init series - fix a leak of a 'struct path'"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: fix a struct path leak in path_umount
|
|
Make sure we also put the dentry and vfsmnt in the illegal flags
and !may_umount cases.
Fixes: 41525f56e256 ("fs: refactor ksys_umount")
Reported-by: Vikas Kumar <vikas.kumar2@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull init and set_fs() cleanups from Al Viro:
"Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series"
* 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits)
init: add an init_dup helper
init: add an init_utimes helper
init: add an init_stat helper
init: add an init_mknod helper
init: add an init_mkdir helper
init: add an init_symlink helper
init: add an init_link helper
init: add an init_eaccess helper
init: add an init_chmod helper
init: add an init_chown helper
init: add an init_chroot helper
init: add an init_chdir helper
init: add an init_rmdir helper
init: add an init_unlink helper
init: add an init_umount helper
init: add an init_mount helper
init: mark create_dev as __init
init: mark console_on_rootfs as __init
init: initialize ramdisk_execute_command at compile time
devtmpfs: refactor devtmpfsd()
...
|
|
Like ksys_umount, but takes a kernel pointer for the destination path.
Switch over the umount in the init code, which just happen to work due to
the implicit set_fs(KERNEL_DS) during early init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Factor out a path_umount helper that takes a struct path * instead of the
actual file name. This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Factor out a path_mount helper that takes a struct path * instead of the
actual file name. This will allow to convert the init and devtmpfs code
to properly mount based on a kernel pointer instead of relying on the
implicit set_fs(KERNEL_DS) during early init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Previous patch changed handling of remount/reconfigure to ignore all
options, including those that are unknown to the fuse kernel fs. This was
done for backward compatibility, but this likely only affects the old
mount(2) API.
The new fsconfig(2) based reconfiguration could possibly be improved. This
would make the new API less of a drop in replacement for the old, OTOH this
is a good chance to get rid of some weirdnesses in the old API.
Several other behaviors might make sense:
1) unknown options are rejected, known options are ignored
2) unknown options are rejected, known options are rejected if the value
is changed, allowed otherwise
3) all options are rejected
Prior to the backward compatibility fix to ignore all options all known
options were accepted (1), even if they change the value of a mount
parameter; fuse_reconfigure() does not look at the config values set by
fuse_parse_param().
To fix that we'd need to verify that the value provided is the same as set
in the initial configuration (2). The major drawback is that this is much
more complex than just rejecting all attempts at changing options (3);
i.e. all options signify initial configuration values and don't make sense
on reconfigure.
This patch opts for (3) with the rationale that no mount options are
reconfigurable in fuse.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of trivial patches that fell through the cracks last cycle"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: fix indentation in deactivate_super()
vfs: Remove duplicated d_mountpoint check in __is_local_mountpoint
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"Fixes:
- Resolve mount option conflicts consistently
- Sync before remount R/O
- Fix file handle encoding corner cases
- Fix metacopy related issues
- Fix an unintialized return value
- Add missing permission checks for underlying layers
Optimizations:
- Allow multipe whiteouts to share an inode
- Optimize small writes by inheriting SB_NOSEC from upper layer
- Do not call ->syncfs() multiple times for sync(2)
- Do not cache negative lookups on upper layer
- Make private internal mounts longterm"
* tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits)
ovl: remove unnecessary lock check
ovl: make oip->index bool
ovl: only pass ->ki_flags to ovl_iocb_to_rwf()
ovl: make private mounts longterm
ovl: get rid of redundant members in struct ovl_fs
ovl: add accessor for ofs->upper_mnt
ovl: initialize error in ovl_copy_xattr
ovl: drop negative dentry in upper layer
ovl: check permission to open real file
ovl: call secutiry hook in ovl_real_ioctl()
ovl: verify permissions in ovl_path_open()
ovl: switch to mounter creds in readdir
ovl: pass correct flags for opening real directory
ovl: fix redirect traversal on metacopy dentries
ovl: initialize OVL_UPPERDATA in ovl_lookup()
ovl: use only uppermetacopy state in ovl_lookup()
ovl: simplify setting of origin for index lookup
ovl: fix out of bounds access warning in ovl_check_fb_len()
ovl: return required buffer size for file handles
ovl: sync dirty data when remounting to ro mode
...
|
|
Overlayfs is using clone_private_mount() to create internal mounts for
underlying layers. These are used for operations requiring a path, such as
dentry_open().
Since these private mounts are not in any namespace they are treated as
short term, "detached" mounts and mntput() involves taking the global
mount_lock, which can result in serious cacheline pingpong.
Make these private mounts longterm instead, which trade the penalty on
mntput() for a slightly longer shutdown time due to an added RCU grace
period when putting these mounts.
Introduce a new helper kern_unmount_many() that can take care of multiple
longterm mounts with a single RCU grace period.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"We have been discussing using pidfds to attach to namespaces for quite
a while and the patches have in one form or another already existed
for about a year. But I wanted to wait to see how the general api
would be received and adopted.
This contains the changes to make it possible to use pidfds to attach
to the namespaces of a process, i.e. they can be passed as the first
argument to the setns() syscall.
When only a single namespace type is specified the semantics are
equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
equals setns(pidfd, CLONE_NEWNET).
However, when a pidfd is passed, multiple namespace flags can be
specified in the second setns() argument and setns() will attach the
caller to all the specified namespaces all at once or to none of them.
Specifying 0 is not valid together with a pidfd. Here are just two
obvious examples:
setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
setns(pidfd, CLONE_NEWUSER);
Allowing to also attach subsets of namespaces supports various
use-cases where callers setns to a subset of namespaces to retain
privilege, perform an action and then re-attach another subset of
namespaces.
Apart from significantly reducing the number of syscalls needed to
attach to all currently supported namespaces (eight "open+setns"
sequences vs just a single "setns()"), this also allows atomic setns
to a set of namespaces, i.e. either attaching to all namespaces
succeeds or we fail without having changed anything.
This is centered around a new internal struct nsset which holds all
information necessary for a task to switch to a new set of namespaces
atomically. Fwiw, with this change a pidfd becomes the only token
needed to interact with a container. I'm expecting this to be
picked-up by util-linux for nsenter rather soon.
Associated with this change is a shiny new test-suite dedicated to
setns() (for pidfds and nsfds alike)"
* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/pidfd: add pidfd setns tests
nsproxy: attach to namespaces via pidfds
nsproxy: add struct nsset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"Assorted patches from Miklos.
An interesting part here is /proc/mounts stuff..."
The "/proc/mounts stuff" is using a cursor for keeeping the location
data while traversing the mount listing.
Also probably worth noting is the addition of faccessat2(), which takes
an additional set of flags to specify how the lookup is done
(AT_EACCESS, AT_SYMLINK_NOFOLLOW, AT_EMPTY_PATH).
* 'from-miklos' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add faccessat2 syscall
vfs: don't parse "silent" option
vfs: don't parse "posixacl" option
vfs: don't parse forbidden flags
statx: add mount_root
statx: add mount ID
statx: don't clear STATX_ATIME on SB_RDONLY
uapi: deprecate STATX_ALL
utimensat: AT_EMPTY_PATH support
vfs: split out access_override_creds()
proc/mounts: add cursor
aio: fix async fsync creds
vfs: allow unprivileged whiteout creation
|
|
This function acts as an out-of-line helper for is_local_mountpoint
is only called after the latter verifies the dentry is not a mountpoint.
There's no semantic changes and the resulting object code is smaller:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-26 (-26)
Function old new delta
__is_local_mountpoint 147 121 -26
Total: Before=34161, After=34135, chg -0.08%
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If mounts are deleted after a read(2) call on /proc/self/mounts (or its
kin), the subsequent read(2) could miss a mount that comes after the
deleted one in the list. This is because the file position is interpreted
as the number mount entries from the start of the list.
E.g. first read gets entries #0 to #9; the seq file index will be 10. Then
entry #5 is deleted, resulting in #10 becoming #9 and #11 becoming #10,
etc... The next read will continue from entry #10, and #9 is missed.
Solve this by adding a cursor entry for each open instance. Taking the
global namespace_sem for write seems excessive, since we are only dealing
with a per-namespace list. Instead add a per-namespace spinlock and use
that together with namespace_sem taken for read to protect against
concurrent modification of the mount list. This may reduce parallelism of
is_local_mountpoint(), but it's hardly a big contention point. We could
also use RCU freeing of cursors to make traversal not need additional
locks, if that turns out to be neceesary.
Only move the cursor once for each read (cursor is not added on open) to
minimize cacheline invalidation. When EOF is reached, the cursor is taken
off the list, in order to prevent an excessive number of cursors due to
inactive open file descriptors.
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
For quite a while we have been thinking about using pidfds to attach to
namespaces. This patchset has existed for about a year already but we've
wanted to wait to see how the general api would be received and adopted.
Now that more and more programs in userspace have started using pidfds
for process management it's time to send this one out.
This patch makes it possible to use pidfds to attach to the namespaces
of another process, i.e. they can be passed as the first argument to the
setns() syscall. When only a single namespace type is specified the
semantics are equivalent to passing an nsfd. That means
setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However,
when a pidfd is passed, multiple namespace flags can be specified in the
second setns() argument and setns() will attach the caller to all the
specified namespaces all at once or to none of them. Specifying 0 is not
valid together with a pidfd.
Here are just two obvious examples:
setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
setns(pidfd, CLONE_NEWUSER);
Allowing to also attach subsets of namespaces supports various use-cases
where callers setns to a subset of namespaces to retain privilege, perform
an action and then re-attach another subset of namespaces.
If the need arises, as Eric suggested, we can extend this patchset to
assume even more context than just attaching all namespaces. His suggestion
specifically was about assuming the process' root directory when
setns(pidfd, 0) or setns(pidfd, SETNS_PIDFD) is specified. For now, just
keep it flexible in terms of supporting subsets of namespaces but let's
wait until we have users asking for even more context to be assumed. At
that point we can add an extension.
The obvious example where this is useful is a standard container
manager interacting with a running container: pushing and pulling files
or directories, injecting mounts, attaching/execing any kind of process,
managing network devices all these operations require attaching to all
or at least multiple namespaces at the same time. Given that nowadays
most containers are spawned with all namespaces enabled we're currently
looking at at least 14 syscalls, 7 to open the /proc/<pid>/ns/<ns>
nsfds, another 7 to actually perform the namespace switch. With time
namespaces we're looking at about 16 syscalls.
(We could amortize the first 7 or 8 syscalls for opening the nsfds by
stashing them in each container's monitor process but that would mean
we need to send around those file descriptors through unix sockets
everytime we want to interact with the container or keep on-disk
state. Even in scenarios where a caller wants to join a particular
namespace in a particular order callers still profit from batching
other namespaces. That mostly applies to the user namespace but
all container runtimes I found join the user namespace first no matter
if it privileges or deprivileges the container similar to how unshare
behaves.)
With pidfds this becomes a single syscall no matter how many namespaces
are supposed to be attached to.
A decently designed, large-scale container manager usually isn't the
parent of any of the containers it spawns so the containers don't die
when it crashes or needs to update or reinitialize. This means that
for the manager to interact with containers through pids is inherently
racy especially on systems where the maximum pid number is not
significicantly bumped. This is even more problematic since we often spawn
and manage thousands or ten-thousands of containers. Interacting with a
container through a pid thus can become risky quite quickly. Especially
since we allow for an administrator to enable advanced features such as
syscall interception where we're performing syscalls in lieu of the
container. In all of those cases we use pidfds if they are available and
we pass them around as stable references. Using them to setns() to the
target process' namespaces is as reliable as using nsfds. Either the
target process is already dead and we get ESRCH or we manage to attach
to its namespaces but we can't accidently attach to another process'
namespaces. So pidfds lend themselves to be used with this api.
The other main advantage is that with this change the pidfd becomes the
only relevant token for most container interactions and it's the only
token we need to create and send around.
Apart from significiantly reducing the number of syscalls from double
digit to single digit which is a decent reason post-spectre/meltdown
this also allows to switch to a set of namespaces atomically, i.e.
either attaching to all the specified namespaces succeeds or we fail. If
we fail we haven't changed a single namespace. There are currently three
namespaces that can fail (other than for ENOMEM which really is not
very interesting since we then have other problems anyway) for
non-trivial reasons, user, mount, and pid namespaces. We can fail to
attach to a pid namespace if it is not our current active pid namespace
or a descendant of it. We can fail to attach to a user namespace because
we are multi-threaded or because our current mount namespace shares
filesystem state with other tasks, or because we're trying to setns()
to the same user namespace, i.e. the target task has the same user
namespace as we do. We can fail to attach to a mount namespace because
it shares filesystem state with other tasks or because we fail to lookup
the new root for the new mount namespace. In most non-pathological
scenarios these issues can be somewhat mitigated. But there are cases where
we're half-attached to some namespace and failing to attach to another one.
I've talked about some of these problem during the hallway track (something
only the pre-COVID-19 generation will remember) of Plumbers in Los Angeles
in 2018(?). Even if all these issues could be avoided with super careful
userspace coding it would be nicer to have this done in-kernel. Pidfds seem
to lend themselves nicely for this.
The other neat thing about this is that setns() becomes an actual
counterpart to the namespace bits of unshare().
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20200505140432.181565-3-christian.brauner@ubuntu.com
|
|
Add a simple struct nsset. It holds all necessary pieces to switch to a new
set of namespaces without leaving a task in a half-switched state which we
will make use of in the next patch. This patch switches the existing setns
logic over without causing a change in setns() behavior. This brings
setns() closer to how unshare() works(). The prepare_ns() function is
responsible to prepare all necessary information. This has two reasons.
First it minimizes dependencies between individual namespaces, i.e. all
install handler can expect that all fields are properly initialized
independent in what order they are called in. Second, this makes the code
easier to maintain and easier to follow if it needs to be changed.
The prepare_ns() helper will only be switched over to use a flags argument
in the next patch. Here it will still use nstype as a simple integer
argument which was argued would be clearer. I'm not particularly
opinionated about this if it really helps or not. The struct nsset itself
already contains the flags field since its name already indicates that it
can contain information required by different namespaces. None of this
should have functional consequences.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
|
|
Some filesystem references got broken by a previous patch
series I submitted. Address those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
New LOOKUP flag, telling path_lookupat() to act as path_mountpointat().
IOW, traverse mounts at the final point and skip revalidation of the
location where it ends up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
1) no instances of ->d_automount() have ever made use of the "return
ERR_PTR(-EISDIR) if you don't feel like mounting anything" - that's
a rudiment of plans that got superseded before the thing went into
the tree. Despite the comment in follow_automount(), autofs has
never done that.
2) if there's no ->d_automount() in dentry_operations, filesystems
should not set DCACHE_NEED_AUTOMOUNT in the first place. None have
ever done so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Protection against automount/automount races (two threads hitting the same
referral point at the same time) is based upon do_add_mount() prevention of
identical overmounts - trying to overmount the root of mounted tree with
the same tree fails with -EBUSY. It's unreliable (the other thread might've
mounted something on top of the automount it has triggered) *and* causes
no end of headache for follow_automount() and its caller, since
finish_automount() behaves like do_new_mount() - if the mountpoint to be is
overmounted, it mounts on top what's overmounting it. It's not only wrong
(we want to go into what's overmounting the automount point and quietly
discard what we planned to mount there), it introduces the possibility of
original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix
vfsmount overput on simultaneous automount) deals with, but it can't do
anything about the reliability of conflict detection - if something had
been overmounted the other thread's automount (e.g. that other thread
having stepped into automount in mount(2)), we don't get that -EBUSY and
the result is
referral point under automounted NFS under explicit overmount
under another copy of automounted NFS
What we need is finish_automount() *NOT* digging into overmounts - if it
finds one, it should just quietly discard the thing it was asked to mount.
And don't bother with actually crossing into the results of finish_automount() -
the same loop that calls follow_automount() will do that just fine on the
next iteration.
IOW, instead of calling lock_mount() have finish_automount() do it manually,
_without_ the "move into overmount and retry" part. And leave crossing into
the results to the caller of follow_automount(), which simplifies it a lot.
Moral: if you end up with a lot of glue working around the calling conventions
of something, perhaps these calling conventions are simply wrong...
Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
preparation to finish_automount() fix (next commit)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
don't bother with the byte-by-byte loops, etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Make to_mnt_ns() static to address the following 'sparse' warning:
fs/namespace.c:1731:22: warning: symbol 'to_mnt_ns' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234830.156260-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In prepare_namespace(), do_mount() can be used instead of ksys_mount()
as the first and third argument are const strings in the kernel, the
second and fourth argument are passed through anyway, and the fifth
argument is NULL.
In do_mount_root(), ksys_mount() is called with the first and third
argument being already kernelspace strings, which do not need to be
copied over from userspace to kernelspace (again). The second and
fourth arguments are passed through to do_mount() anyway. The fifth
argument, while already residing in kernelspace, needs to be put into
a page of its own. Then, do_mount() can be used instead of
ksys_mount().
Once this is done, there are no in-kernel users to ksys_mount() left,
which can therefore be removed.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make __d_alloc() static
fs/namespace: add __user to open_tree and move_mount syscalls
fs/fnctl: fix missing __user in fcntl_rw_hint()
|
