summaryrefslogtreecommitdiff
path: root/fs/locks.c
AgeCommit message (Collapse)Author
2014-06-10locks: set fl_owner for leases back to current->filesJeff Layton
This fixes a regression due to commit 130d1f956ab3 (locks: ensure that fl_owner is always initialized properly in flock and lease codepaths). I had mistakenly thought that the fl_owner wasn't used in the lease code, but I missed the place in __break_lease that does use it. The i_have_this_lease check in generic_add_lease uses it. While I'm not sure that check is terribly helpful [1], reset it back to using current->files in order to ensure that there's no behavior change here. [1]: leases are owned by the file description. It's possible that this is a threaded program, and the lease breaker and the task that would handle the signal are different, even if they have the same file table. So, there is the potential for false positives with this check. Fixes: 130d1f956ab3 (locks: ensure that fl_owner is always initialized properly in flock and lease codepaths) Signed-off-by: Jeff Layton <jlayton@primarydata.com>
2014-06-02locks: add some tracepoints in the lease handling codeJeff Layton
v2: add a __break_lease tracepoint for non-blocking case Recently, I needed these to help track down a softlockup when recalling a delegation, but they might be helpful in other situations as well. Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
2014-06-02fs/locks.c: replace seq_printf by seq_putsFabian Frederick
Replace seq_printf where possible Cc: Jeff Layton <jlayton@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
2014-06-02locks: ensure that fl_owner is always initialized properly in flock and ↵Jeff Layton
lease codepaths Currently, the fl_owner isn't set for flock locks. Some filesystems use byte-range locks to simulate flock locks and there is a common idiom in those that does: fl->fl_owner = (fl_owner_t)filp; fl->fl_start = 0; fl->fl_end = OFFSET_MAX; Since flock locks are generally "owned" by the open file description, move this into the common flock lock setup code. The fl_start and fl_end fields are already set appropriately, so remove the unneeded setting of that in flock ops in those filesystems as well. Finally, the lease code also sets the fl_owner as if they were owned by the process and not the open file description. This is incorrect as leases have the same ownership semantics as flock locks. Set them the same way. The lease code doesn't actually use the fl_owner value for anything, so this is more for consistency's sake than a bugfix. Reported-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jeff Layton <jlayton@poochiereds.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion) Acked-by: J. Bruce Fields <bfields@fieldses.org>
2014-05-09locks: only validate the lock vs. f_mode in F_SETLK codepathsJeff Layton
v2: replace missing break in switch statement (as pointed out by Dave Jones) commit bce7560d4946 (locks: consolidate checks for compatible filp->f_mode values in setlk handlers) introduced a regression in the F_GETLK handler. flock64_to_posix_lock is a shared codepath between F_GETLK and F_SETLK, but the f_mode checks should only be applicable to the F_SETLK codepaths according to POSIX. Instead of just reverting the patch, add a new function to do this checking and have the F_SETLK handlers call it. Cc: Dave Jones <davej@redhat.com> Reported-and-Tested-by: Reuben Farrelly <reuben@reub.net> Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
2014-04-23locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" insteadJeff Layton
File-private locks have been re-christened as "open file description" locks. Finish the symbol name cleanup in the internal implementation. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22locks: rename file-private locks to "open file description locks"Jeff Layton
File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-15locks: allow __break_lease to sleep even when break_time is 0Jeff Layton
A fl->fl_break_time of 0 has a special meaning to the lease break code that basically means "never break the lease". knfsd uses this to ensure that leases don't disappear out from under it. Unfortunately, the code in __break_lease can end up passing this value to wait_event_interruptible as a timeout, which prevents it from going to sleep at all. This makes __break_lease to spin in a tight loop and causes soft lockups. Fix this by ensuring that we pass a minimum value of 1 as a timeout instead. Cc: <stable@vger.kernel.org> Cc: J. Bruce Fields <bfields@fieldses.org> Reported-by: Terry Barnaby <terry1@beam.ltd.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: make locks_mandatory_area check for file-private locksJeff Layton
Allow locks_mandatory_area() to handle file-private locks correctly. If there is a file-private lock set on an open file and we're doing I/O via the same, then that should not cause anything to block. Handle this by first doing a non-blocking FL_ACCESS check for a file-private lock, and then fall back to checking for a classic POSIX lock (and possibly blocking). Note that this approach is subject to the same races that have always plagued mandatory locking on Linux. Reported-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: fix locks_mandatory_locked to respect file-private locksJeff Layton
As Trond pointed out, you can currently deadlock yourself by setting a file-private lock on a file that requires mandatory locking and then trying to do I/O on it. Avoid this problem by plumbing some knowledge of file-private locks into the mandatory locking code. In order to do this, we must pass down information about the struct file that's being used to locks_verify_locked. Reported-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@redhat.com>
2014-03-31locks: require that flock->l_pid be set to 0 for file-private locksJeff Layton
Neil Brown suggested potentially overloading the l_pid value as a "lock context" field for file-private locks. While I don't think we will probably want to do that here, it's probably a good idea to ensure that in the future we could extend this API without breaking existing callers. Typically the l_pid value is ignored for incoming struct flock arguments, serving mainly as a place to return the pid of the owner if there is a conflicting lock. For file-private locks, require that it currently be set to 0 and return EINVAL if it isn't. If we eventually want to make a non-zero l_pid mean something, then this will help ensure that we don't break legacy programs that are using file-private locks. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: add new fcntl cmd values for handling file private locksJeff Layton
Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: skip deadlock detection on FL_FILE_PVT locksJeff Layton
It's not really feasible to do deadlock detection with FL_FILE_PVT locks since they aren't owned by a single task, per-se. Deadlock detection also tends to be rather expensive so just skip it for these sorts of locks. Also, add a FIXME comment about adding more limited deadlock detection that just applies to ro -> rw upgrades, per Andy's request. Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: pass the cmd value to fcntl_getlk/getlk64Jeff Layton
Once we introduce file private locks, we'll need to know what cmd value was used, as that affects the ownership and whether a conflict would arise. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: report l_pid as -1 for FL_FILE_PVT locksJeff Layton
FL_FILE_PVT locks are no longer tied to a particular pid, and are instead inheritable by child processes. Report a l_pid of '-1' for these sorts of locks since the pid is somewhat meaningless for them. This precedent comes from FreeBSD. There, POSIX and flock() locks can conflict with one another. If fcntl(F_GETLK, ...) returns a lock set with flock() then the l_pid member cannot be a process ID because the lock is not held by a process as such. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: make /proc/locks show IS_FILE_PVT locks as type "FLPVT"Jeff Layton
In a later patch, we'll be adding a new type of lock that's owned by the struct file instead of the files_struct. Those sorts of locks will be flagged with a new FL_FILE_PVT flag. Report these types of locks as "FLPVT" in /proc/locks to distinguish them from "classic" POSIX locks. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: rename locks_remove_flock to locks_remove_fileJeff Layton
This function currently removes leases in addition to flock locks and in a later patch we'll have it deal with file-private locks too. Rename it to locks_remove_file to indicate that it removes locks that are associated with a particular struct file, and not just flock locks. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: consolidate checks for compatible filp->f_mode values in setlk handlersJeff Layton
Move this check into flock64_to_posix_lock instead of duplicating it in two places. This also fixes a minor wart in the code where we continue referring to the struct flock after converting it to struct file_lock. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: fix posix lock range overflow handlingJ. Bruce Fields
In the 32-bit case fcntl assigns the 64-bit f_pos and i_size to a 32-bit off_t. The existing range checks also seem to depend on signed arithmetic wrapping when it overflows. In practice maybe that works, but we can be more careful. That also allows us to make a more reliable distinction between -EINVAL and -EOVERFLOW. Note that in the 32-bit case SEEK_CUR or SEEK_END might allow the caller to set a lock with starting point no longer representable as a 32-bit value. We could return -EOVERFLOW in such cases, but the locks code is capable of handling such ranges, so we choose to be lenient here. The only problem is that subsequent GETLK calls on such a lock will fail with EOVERFLOW. While we're here, do some cleanup including consolidating code for the flock and flock64 cases. Signed-off-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: eliminate BUG() call when there's an unexpected lock on file closeJeff Layton
A leftover lock on the list is surely a sign of a problem of some sort, but it's not necessarily a reason to panic the box. Instead, just log a warning with some info about the lock, and then delete it like we would any other lock. In the event that the filesystem declares a ->lock f_op, we may end up leaking something, but that's generally preferable to an immediate panic. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: add __acquires and __releases annotations to locks_start and locks_stopJeff Layton
...to make sparse happy. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: remove "inline" qualifier from fl_link manipulation functionsJeff Layton
It's best to let the compiler decide that. Acked-by: J. Bruce Fields <bfields@fieldses.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: clean up comment typoJeff Layton
Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-03-31locks: close potential race between setlease and openJeff Layton
As Al Viro points out, there is an unlikely, but possible race between opening a file and setting a lease on it. generic_add_lease is done with the i_lock held, but the inode->i_flock check in break_lease is lockless. It's possible for another task doing an open to do the entire pathwalk and call break_lease between the point where generic_add_lease checks for a conflicting open and adds the lease to the list. If this occurs, we can end up with a lease set on the file with a conflicting open. To guard against that, check again for a conflicting open after adding the lease to the i_flock list. If the above race occurs, then we can simply unwind the lease setting and return -EAGAIN. Because we take dentry references and acquire write access on the file before calling break_lease, we know that if the i_flock list is empty when the open caller goes to check it then the necessary refcounts have already been incremented. Thus the additional check for a conflicting open will see that there is one and the setlease call will fail. Cc: Bruce Fields <bfields@fieldses.org> Cc: David Howells <dhowells@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@fieldses.org>
2013-11-13locks: missing unlock on error in generic_add_lease()Dan Carpenter
We should unlock here before returning. Fixes: df4e8d2c1d2b ('locks: implement delegations') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09locks: implement delegationsJ. Bruce Fields
Implement NFSv4 delegations at the vfs level using the new FL_DELEG lock type. Note nfsd is the only delegation user and is only using read delegations. Warn on any attempt to set a write delegation for now. We'll come back to that case later. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09locks: introduce new FL_DELEG lock flagJ. Bruce Fields
For now FL_DELEG is just a synonym for FL_LEASE. So this patch doesn't change behavior. Next we'll modify break_lease to treat FL_DELEG leases differently, to account for the fact that NFSv4 delegations should be broken in more situations than Windows oplocks. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24file->f_op is never NULL...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-08locks: move file_lock_list to a set of percpu hlist_heads and convert ↵Jeff Layton
file_lock_lock to an lglock The file_lock_list is only used for /proc/locks. The vastly common case is for locks to be put onto the list and come off again, without ever being traversed. Help optimize for this use-case by moving to percpu hlist_head-s. At the same time, we can make the locking less contentious by moving to an lglock. When iterating over the lists for /proc/locks, we must take the global lock and then iterate over each CPU's list in turn. This change necessitates a new fl_link_cpu field to keep track of which CPU the entry is on. On x86_64 at least, this field is placed within an existing hole in the struct to avoid growing the size. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-05helper for reading ->d_countAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: give the blocked_hash its own spinlockJeff Layton
There's no reason we have to protect the blocked_hash and file_lock_list with the same spinlock. With the tests I have, breaking it in two gives a barely measurable performance benefit, but it seems reasonable to make this locking as granular as possible. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: add a new "lm_owner_key" lock operationJeff Layton
Currently, the hashing that the locking code uses to add these values to the blocked_hash is simply calculated using fl_owner field. That's valid in most cases except for server-side lockd, which validates the owner of a lock based on fl_owner and fl_pid. In the case where you have a small number of NFS clients doing a lot of locking between different processes, you could end up with all the blocked requests sitting in a very small number of hash buckets. Add a new lm_owner_key operation to the lock_manager_operations that will generate an unsigned long to use as the key in the hashtable. That function is only implemented for server-side lockd, and simply XORs the fl_owner and fl_pid. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: turn the blocked_list into a hashtableJeff Layton
Break up the blocked_list into a hashtable, using the fl_owner as a key. This speeds up searching the hash chains, which is especially significant for deadlock detection. Note that the initial implementation assumes that hashing on fl_owner is sufficient. In most cases it should be, with the notable exception being server-side lockd, which compares ownership using a tuple of the nlm_host and the pid sent in the lock request. So, this may degrade to a single hash bucket when you only have a single NFS client. That will be addressed in a later patch. The careful observer may note that this patch leaves the file_lock_list alone. There's much less of a case for turning the file_lock_list into a hashtable. The only user of that list is the code that generates /proc/locks, and it always walks the entire list. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: convert fl_link to a hlist_nodeJeff Layton
Testing has shown that iterating over the blocked_list for deadlock detection turns out to be a bottleneck. In order to alleviate that, begin the process of turning it into a hashtable. We start by turning the fl_link into a hlist_node and the global lists into hlists. A later patch will do the conversion of the blocked_list to a hashtable. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: avoid taking global lock if possible when waking up blocked waitersJeff Layton
Since we always hold the i_lock when inserting a new waiter onto the fl_block list, we can avoid taking the global lock at all if we find that it's empty when we go to wake up blocked waiters. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: protect most of the file_lock handling with i_lockJeff Layton
Having a global lock that protects all of this code is a clear scalability problem. Instead of doing that, move most of the code to be protected by the i_lock instead. The exceptions are the global lists that the ->fl_link sits on, and the ->fl_block list. ->fl_link is what connects these structures to the global lists, so we must ensure that we hold those locks when iterating over or updating these lists. Furthermore, sound deadlock detection requires that we hold the blocked_list state steady while checking for loops. We also must ensure that the search and update to the list are atomic. For the checking and insertion side of the blocked_list, push the acquisition of the global lock into __posix_lock_file and ensure that checking and update of the blocked_list is done without dropping the lock in between. On the removal side, when waking up blocked lock waiters, take the global lock before walking the blocked list and dequeue the waiters from the global list prior to removal from the fl_block list. With this, deadlock detection should be race free while we minimize excessive file_lock_lock thrashing. Finally, in order to avoid a lock inversion problem when handling /proc/locks output we must ensure that manipulations of the fl_block list are also protected by the file_lock_lock. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: encapsulate the fl_link list handlingJeff Layton
Move the fl_link list handling routines into a separate set of helpers. Also ensure that locks and requests are always put on global lists last (after fully initializing them) and are taken off before unintializing them. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: make "added" in __posix_lock_file a boolJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: comment cleanups and clarificationsJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: make generic_add_lease and generic_delete_lease staticJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29cifs: use posix_unblock_lock instead of locks_delete_blockJeff Layton
commit 66189be74 (CIFS: Fix VFS lock usage for oplocked files) exported the locks_delete_block symbol. There's already an exported helper function that provides this capability however, so make cifs use that instead and turn locks_delete_block back into a static function. Note that if fl->fl_next == NULL then this lock has already been through locks_delete_block(), so we should be OK to ignore an ENOENT error here and simply not retry the lock. Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29locks: drop the unused filp argument to posix_unblock_lockJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-09nfs: disintegrate UAPI for nfsJ. Bruce Fields
This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-09-26switch simple cases of fget_light to fdgetAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-20vfs: don't treat fl_type as a bitmapJeff Layton
The rules for fl_type are rather convoluted. Typically it's treated as holding specific values, except in the case of LOCK_MAND, in which case it can be or'ed with LOCK_READ|LOCK_WRITE. On some arches F_WRLCK == 2 and F_UNLCK == 3, so and'ing with F_WRLCK will also catch the F_UNLCK case. It's unlikely in either case here that we'd ever see F_UNLCK since those shouldn't end up on any lists, but it's still best to be consistent. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-08-01locks: remove unused lm_release_privateJ. Bruce Fields
In commit 3b6e2723f32d ("locks: prevent side-effects of locks_release_private before file_lock is initialized") we removed the last user of lm_release_private without removing the field itself. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd changes from J. Bruce Fields: "This has been an unusually quiet cycle--mostly bugfixes and cleanup. The one large piece is Stanislav's work to containerize the server's grace period--but that in itself is just one more step in a not-yet-complete project to allow fully containerized nfs service. There are a number of outstanding delegation, container, v4 state, and gss patches that aren't quite ready yet; 3.7 may be wilder." * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: (35 commits) NFSd: make boot_time variable per network namespace NFSd: make grace end flag per network namespace Lockd: move grace period management from lockd() to per-net functions LockD: pass actual network namespace to grace period management functions LockD: manage grace list per network namespace SUNRPC: service request network namespace helper introduced NFSd: make nfsd4_manager allocated per network namespace context. LockD: make lockd manager allocated per network namespace LockD: manage grace period per network namespace Lockd: add more debug to host shutdown functions Lockd: host complaining function introduced LockD: manage used host count per networks namespace LockD: manage garbage collection timeout per networks namespace LockD: make garbage collector network namespace aware. LockD: mark host per network namespace on garbage collect nfsd4: fix missing fault_inject.h include locks: move lease-specific code out of locks_delete_lock locks: prevent side-effects of locks_release_private before file_lock is initialized NFSd: set nfsd_serv to NULL after service destruction NFSd: introduce nfsd_destroy() helper ...
2012-07-27locks: move lease-specific code out of locks_delete_lockJ. Bruce Fields
No point putting something only used by one caller into common code. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27locks: prevent side-effects of locks_release_private before file_lock is ↵Filipe Brandenburger
initialized When calling fcntl(fd, F_SETLEASE, lck) [with lck=F_WRLCK or F_RDLCK], the custom signal or owner (if any were previously set using F_SETSIG or F_SETOWN fcntls) would be reset when F_SETLEASE was called for the second time on the same file descriptor. This bug is a regression of 2.6.37 and is described here: https://bugzilla.kernel.org/show_bug.cgi?id=43336 This patch reverts a commit from Oct 2004 (with subject "nfs4 lease: move the f_delown processing") which originally introduced the lm_release_private callback. Signed-off-by: Filipe Brandenburger <filbranden@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>