summaryrefslogtreecommitdiff
path: root/fs/locks.c
AgeCommit message (Collapse)Author
2018-07-21signal: Use PIDTYPE_TGID to clearly store where file signals will be sentEric W. Biederman
When f_setown is called a pid and a pid type are stored. Replace the use of PIDTYPE_PID with PIDTYPE_TGID as PIDTYPE_TGID goes to the entire thread group. Replace the use of PIDTYPE_MAX with PIDTYPE_PID as PIDTYPE_PID now is only for a thread. Update the users of __f_setown to use PIDTYPE_TGID instead of PIDTYPE_PID. For now the code continues to capture task_pid (when task_tgid would really be appropriate), and iterate on PIDTYPE_PID (even when type == PIDTYPE_TGID) out of an abundance of caution to preserve existing behavior. Oleg Nesterov suggested using the test to ensure we use PIDTYPE_PID for tgid lookup also be used to avoid taking the tasklist lock. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-18Partially revert "locks: fix file locking on overlayfs"Miklos Szeredi
This partially reverts commit c568d68341be7030f5647def68851e469b21ca11. Overlayfs files will now automatically get the correct locks, no need to hack overlay support in VFS. It is a partial revert, because it leaves the locks_inode() calls in place and defines locks_inode() to file_inode(). We could revert those as well, but it would be unnecessary code churn and it makes sense to document that we are getting the inode for locking purposes. Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace API for some time (though not in a useful way). Will try to remove internal flags later when the dust around the new mount API settles. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org>
2018-07-18Revert "vfs: do get_write_access() on upper layer of overlayfs"Miklos Szeredi
This reverts commit 4d0c5ba2ff79ef9f5188998b29fd28fcb05f3667. We now get write access on both overlay and underlying layers so this patch is no longer needed for correct operation. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14fs/lock: show locks taken by processes from another pidnsKonstantin Khorenko
Currently if we face a lock taken by a process invisible in the current pidns we skip the lock completely, but this 1) makes the output not that nice (root@vz7)/: cat /proc/${PID_A2}/fdinfo/3 pos: 4 flags: 02100002 mnt_id: 257 lock: (root@vz7)/: 2) makes it more difficult to debug issues with leaked flocks if you get error on lock, but don't see any locks in /proc/$id/fdinfo/$file Let's show information about such locks again as previously, but show zero in the owner pid field. After the patch: =============== (root@vz7)/:cat /proc/${PID_A2}/fdinfo/3 pos: 4 flags: 02100002 mnt_id: 295 lock: 1: FLOCK ADVISORY WRITE 0 b6:f8a61:529946 0 EOF Fixes: 9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks") Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Acked-by: Andrey Vagin <avagin@openvz.org> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-06-14fs/lock: skip lock owner pid translation in case we are in init_pid_nsKonstantin Khorenko
If the flock owner process is dead and its pid has been already freed, pid translation won't work, but we still want to show flock owner pid number when expecting /proc/$PID/fdinfo/$FD in init pidns. Reproducer: process A process A1 process A2 fork()---------> exit() open() flock() fork()---------> exit() sleep() Before the patch: ================ (root@vz7)/: cat /proc/${PID_A2}/fdinfo/3 pos: 4 flags: 02100002 mnt_id: 257 lock: (root@vz7)/: After the patch: =============== (root@vz7)/:cat /proc/${PID_A2}/fdinfo/3 pos: 4 flags: 02100002 mnt_id: 295 lock: 1: FLOCK ADVISORY WRITE ${PID_A1} b6:f8a61:529946 0 EOF Fixes: 9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks") Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Acked-by: Andrey Vagin <avagin@openvz.org> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-16proc: introduce proc_create_seq_privateChristoph Hellwig
Variant of proc_create_data that directly take a struct seq_operations argument + a private state size and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-26treewide: Align function definition open/close bracesJoe Perches
Some functions definitions have either the initial open brace and/or the closing brace outside of column 1. Move those braces to column 1. This allows various function analyzers like gnu complexity to work properly for these modified functions. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-02-08Merge tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd update from Bruce Fields: "A fairly small update this time around. Some cleanup, RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug. The bigger deal for nfsd this time around was Jeff Layton's already-merged i_version patches" * tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux: svcrdma: Fix Read chunk round-up NFSD: hide unused svcxdr_dupstr() nfsd: store stat times in fill_pre_wcc() instead of inode times nfsd: encode stat->mtime for getattr instead of inode->i_mtime nfsd: return RESOURCE not GARBAGE_ARGS on too many ops nfsd4: don't set lock stateid's sc_type to CLOSED nfsd: Detect unhashed stids in nfsd4_verify_open_stid() sunrpc: remove dead code in svc_sock_setbufsize svcrdma: Post Receives in the Receive completion handler nfsd4: permit layoutget of executable-only files lockd: convert nlm_rqst.a_count from atomic_t to refcount_t lockd: convert nlm_lockowner.count from atomic_t to refcount_t lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
2018-02-08nfsd: encode stat->mtime for getattr instead of inode->i_mtimeAmir Goldstein
The values of stat->mtime and inode->i_mtime may differ for overlayfs and stat->mtime is the correct value to use when encoding getattr. This is also consistent with the fact that other attr times are also encoded from stat values. Both callers of lease_get_mtime() already have the value of stat->mtime, so the only needed change is that lease_get_mtime() will not overwrite this value with inode->i_mtime in case the inode does not have an exclusive lease. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-21locks: restore a warn for leaked locks on closeBenjamin Coddington
When locks.c moved to using file_lock_context, the check for any locks that were not released was moved from the __fput() to destroy_inode() path in commit 8634b51f6ca2 ("locks: convert lease handling to file_lock_context"). This warning has been quite useful for catching bugs, particularly in NFS where lock handling still sees some churn. Let's bring back the warning for leaked locks on __fput, as this warning is much more likely to be seen and reported by users. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-16fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locksBenjamin Coddington
Since commit c69899a17ca4 "NFSv4: Update of VFS byte range lock must be atomic with the stateid update", NFSv4 has been inserting locks in rpciod worker context. The result is that the file_lock's fl_nspid is the kworker's pid instead of the original userspace pid. The fl_nspid is only used to represent the namespaced virtual pid number when displaying locks or returning from F_GETLK. There's no reason to set it for every inserted lock, since we can usually just look it up from fl_pid. So, instead of looking up and holding struct pid for every lock, let's just look up the virtual pid number from fl_pid when it is needed. That means we can remove fl_nspid entirely. The translaton and presentation of fl_pid should handle the following four cases: 1 - F_GETLK on a remote file with a remote lock: In this case, the filesystem should determine the l_pid to return here. Filesystems should indicate that the fl_pid represents a non-local pid value that should not be translated by returning an fl_pid <= 0. 2 - F_GETLK on a local file with a remote lock: This should be the l_pid of the lock manager process, and translated. 3 - F_GETLK on a remote file with a local lock, and 4 - F_GETLK on a local file with a local lock: These should be the translated l_pid of the local locking process. Fuse was already doing the correct thing by translating the pid into the caller's namespace. With this change we must update fuse to translate to init's pid namespace, so that the locks API can then translate from init's pid namespace into the pid namespace of the caller. With this change, the locks API will expect that if a filesystem returns a remote pid as opposed to a local pid for F_GETLK, that remote pid will be <= 0. This signifies that the pid is remote, and the locks API will forego translating that pid into the pid namespace of the local calling process. Finally, we convert remote filesystems to present remote pids using negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote pid returned for F_GETLK lock requests. Since local pids will never be larger than PID_MAX_LIMIT (which is currently defined as <= 4 million), but pid_t is an unsigned int, we should have plenty of room to represent remote pids with negative numbers if we assume that remote pid numbers are similarly limited. If this is not the case, then we run the risk of having a remote pid returned for which there is also a corresponding local pid. This is a problem we have now, but this patch should reduce the chances of that occurring, while also returning those remote pid numbers, for whatever that may be worth. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-16fs/locks: Use allocation rather than the stack in fcntl_getlk()Benjamin Coddington
Struct file_lock is fairly large, so let's save some space on the stack by using an allocation for struct file_lock in fcntl_getlk(), just as we do for fcntl_setlk(). Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-05-27fs/locks: pass kernel struct flock to fcntl_getlk/setlkChristoph Hellwig
This will make it easier to implement a sane compat fcntl syscall. [ jlayton: fix undeclared identifiers in 32-bit fcntl64 syscall handler ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-05-27fs: locks: Fix some troubles at kernel-doc commentsMauro Carvalho Chehab
There are a few syntax violations that cause outputs of a few comments to not be properly parsed in ReST format. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-04-21locks: Set FL_CLOSE when removing flock locks on close()Benjamin Coddington
Set FL_CLOSE in fl_flags as in locks_remove_posix() when clearing locks. NFS will check for this flag to ensure an unlock is sent in a following patch. Fuse handles flock and posix locks differently for FL_CLOSE, and so requires a fixup to retain the existing behavior for flock. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18locking, fs/locks: Add missing file_sem locksPeter Zijlstra
I overlooked a few code-paths that can lead to locks_delete_global_locks(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jeff Layton <jlayton@poochiereds.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: syzkaller <syzkaller@googlegroups.com> Link: http://lkml.kernel.org/r/20161008081228.GF3142@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-10-10Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted misc bits and pieces. There are several single-topic branches left after this (rename2 series from Miklos, current_time series from Deepa Dinamani, xattr series from Andreas, uaccess stuff from from me) and I'd prefer to send those separately" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits) proc: switch auxv to use of __mem_open() hpfs: support FIEMAP cifs: get rid of unused arguments of CIFSSMBWrite() posix_acl: uapi header split posix_acl: xattr representation cleanups fs/aio.c: eliminate redundant loads in put_aio_ring_file fs/internal.h: add const to ns_dentry_operations declaration compat: remove compat_printk() fs/buffer.c: make __getblk_slow() static proc: unsigned file descriptors fs/file: more unsigned file descriptors fs: compat: remove redundant check of nr_segs cachefiles: Fix attempt to read i_blocks after deleting file [ver #2] cifs: don't use memcpy() to copy struct iov_iter get rid of separate multipage fault-in primitives fs: Avoid premature clearing of capabilities fs: Give dentry to inode_change_ok() instead of inode fuse: Propagate dentry down to inode_change_ok() ceph: Propagate dentry down to inode_change_ok() xfs: Propagate dentry down to inode_change_ok() ...
2016-10-04Merge tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linuxLinus Torvalds
Pull file locking updates from Jeff Layton: "Only a single patch from Nikolay this cycle, with a small change to better handle /proc/locks in a containerized host" * tag 'locks-v4.9-1' of git://git.samba.org/jlayton/linux: locks: Filter /proc/locks output on proc pid ns
2016-09-27fs: Replace current_fs_time() with current_time()Deepa Dinamani
current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-22fs/locks: Use percpu_down_read_preempt_disable()Peter Zijlstra
Avoid spurious preemption. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22fs/locks: Replace lg_local with a per-cpu spinlockPeter Zijlstra
As Oleg suggested, replace file_lock_list with a structure containing the hlist head and a spinlock. This completely removes the lglock from fs/locks. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22fs/locks: Replace lg_global with a percpu-rwsemPeter Zijlstra
Replace the global part of the lglock with a percpu-rwsem. Since fcl_lock is a spinlock and itself nests under i_lock, which too is a spinlock we cannot acquire sleeping locks at locks_{insert,remove}_global_locks(). We can however wrap all fcl_lock acquisitions with percpu_down_read such that all invocations of locks_{insert,remove}_global_locks() have that read lock held. This allows us to replace the lg_global part of the lglock with the write side of the rwsem. In the absense of writers, percpu_{down,up}_read() are free of atomic instructions. This further avoids the very long preempt-disable regions caused by lglock on larger machines. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-16vfs: do get_write_access() on upper layer of overlayfsMiklos Szeredi
The problem with writecount is: we want consistent handling of it for underlying filesystems as well as overlayfs. Making sure i_writecount is correct on all layers is difficult. Instead this patch makes sure that when write access is acquired, it's always done on the underlying writable layer (called the upper layer). We must also make sure to look at the writecount on this layer when checking for conflicting leases. Open for write already updates the upper layer's writecount. Leaving only truncate. For truncate copy up must happen before get_write_access() so that the writecount is updated on the upper layer. Problem with this is if something fails after that, then copy-up was done needlessly. E.g. if break_lease() was interrupted. Probably not a big deal in practice. Another interesting case is if there's a denywrite on a lower file that is then opened for write or truncated. With this patch these will succeed, which is somewhat counterintuitive. But I think it's still acceptable, considering that the copy-up does actually create a different file, so the old, denywrite mapping won't be touched. On non-overlayfs d_real() is an identity function and d_real_inode() is equivalent to d_inode() so this patch doesn't change behavior in that case. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Acked-by: Jeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org>
2016-09-16locks: fix file locking on overlayfsMiklos Szeredi
This patch allows flock, posix locks, ofd locks and leases to work correctly on overlayfs. Instead of using the underlying inode for storing lock context use the overlay inode. This allows locks to be persistent across copy-up. This is done by introducing locks_inode() helper and using it instead of file_inode() to get the inode in locking code. For non-overlayfs the two are equivalent, except for an extra pointer dereference in locks_inode(). Since lock operations are in "struct file_operations" we must also make sure not to call underlying filesystem's lock operations. Introcude a super block flag MS_NOREMOTELOCK to this effect. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Acked-by: Jeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org>
2016-08-18locks: Filter /proc/locks output on proc pid nsNikolay Borisov
On busy container servers reading /proc/locks shows all the locks created by all clients. This can cause large latency spikes. In my case I observed lsof taking up to 5-10 seconds while processing around 50k locks. Fix this by limiting the locks shown only to those created in the same pidns as the one the proc fs was mounted in. When reading /proc/locks from the init_pid_ns proc instance then perform no filtering [ jlayton: reformat comments for 80 columns ] Signed-off-by: Nikolay Borisov <kernel@kyup.com> Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2016-07-01locks: use file_inode()Miklos Szeredi
(Another one for the f_path debacle.) ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask. The reason is that generic_add_lease() used filp->f_path.dentry->inode while all the others use file_inode(). This makes a difference for files opened on overlayfs since the former will point to the overlay inode the latter to the underlying inode. So generic_add_lease() added the lease to the overlay inode and generic_delete_lease() removed it from the underlying inode. When the file was released the lease remained on the overlay inode's lock list, resulting in use after free. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-12Merge branch 'work.copy_file_range' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs copy_file_range updates from Al Viro: "Several series around copy_file_range/CLONE" * 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: btrfs: use new dedupe data function pointer vfs: hoist the btrfs deduplication ioctl to the vfs vfs: wire up compat ioctl for CLONE/CLONE_RANGE cifs: avoid unused variable and label nfsd: implement the NFSv4.2 CLONE operation nfsd: Pass filehandle to nfs4_preprocess_stateid_op() vfs: pull btrfs clone API to vfs layer locks: new locks_mandatory_area calling convention vfs: Add vfs_copy_file_range() support for pagecache copies btrfs: add .copy_file_range file operation x86: add sys_copy_file_range to syscall tables vfs: add copy_file_range syscall and vfs helper
2016-01-08locks: rename __posix_lock_file to posix_lock_inodeJeff Layton
...a more descriptive name and we can drop the double underscore prefix. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-08locks: prink more detail when there are leaked locksJeff Layton
Right now, we just get WARN_ON_ONCE, which is not particularly helpful. Have it dump some info about the locks and the inode to make it easier to track down leaked locks in the future. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-08locks: pass inode pointer to locks_free_lock_contextJeff Layton
...so we can print information about it if there are leaked locks. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-08locks: sprinkle some tracepoints around the file locking codeJeff Layton
Add some tracepoints around the POSIX locking code. These were useful when tracking down problems when handling the race between setlk and close. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-08locks: don't check for race with close when setting OFD lockJeff Layton
We don't clean out OFD locks on close(), so there's no need to check for a race with them here. They'll get cleaned out at the same time that flock locks are. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2016-01-07locks: fix unlock when fcntl_setlk races with a closeJeff Layton
Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Fixes: c293621bbf67 (stale POSIX lock handling) Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
2015-12-18fs: make locks.c explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config FILE_LOCKING bool "Enable POSIX file locking API" if EXPERT ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering gets bumped to one level earlier when we use the more appropriate fs_initcall here. However we've made similar changes before without any fallout and none is expected here either. Cc: Jeff Layton <jlayton@poochiereds.net> Acked-by: Jeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-12-07locks: new locks_mandatory_area calling conventionChristoph Hellwig
Pass a loff_t end for the last byte instead of the 32-bit count parameter to allow full file clones even on 32-bit architectures. While we're at it also simplify the read/write selection. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-18locks: use list_first_entry_or_null()Geliang Tang
Simplify the code with list_first_entry_or_null(). Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-11-16locks: Allow disabling mandatory locking at compile timeJeff Layton
Mandatory locking appears to be almost unused and buggy and there appears no real interest in doing anything with it. Since effectively no one uses the code and since the code is buggy let's allow it to be disabled at compile time. I would just suggest removing the code but undoubtedly that will break some piece of userspace code somewhere. For the distributions that don't care about this piece of code this gives a nice starting point to make mandatory locking go away. Cc: Benjamin Coddington <bcodding@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jeff Layton <jeff.layton@primarydata.com> Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-22locks: cleanup posix_lock_inode_wait and flock_lock_inode_waitBenjamin Coddington
All callers use locks_lock_inode_wait() instead. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-22Move locks API users to locks_lock_inode_wait()Benjamin Coddington
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct locks API function, use the check within locks_lock_inode_wait(). This allows for some later cleanup. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-22locks: introduce locks_lock_inode_wait()Benjamin Coddington
Users of the locks API commonly call either posix_lock_file_wait() or flock_lock_file_wait() depending upon the lock type. Add a new function locks_lock_inode_wait() which will check and call the correct function for the type of lock passed in. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-15locks: Use more file_inode and fix a commentBenjamin Coddington
Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-09-21fs: fix data races on inode->i_flctxDmitry Vyukov
locks_get_lock_context() uses cmpxchg() to install i_flctx. cmpxchg() is a release operation which is correct. But it uses a plain load to load i_flctx. This is incorrect. Subsequent loads from i_flctx can hoist above the load of i_flctx pointer itself and observe uninitialized garbage there. This in turn can lead to corruption of ctx->flc_lock and other members. Documentation/memory-barriers.txt explicitly requires to use a barrier in such context: "A load-load control dependency requires a full read memory barrier". Use smp_load_acquire() in locks_get_lock_context() and in bunch of other functions that can proceed concurrently with locks_get_lock_context(). The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-08-31fs: fix fs/locks.c kernel-doc warningRandy Dunlap
Fix kernel-doc warnings in fs/locks.c: Warning(..//fs/locks.c:1577): No description found for parameter 'flags' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-07-13locks: inline posix_lock_file_wait and flock_lock_file_waitJeff Layton
They just call file_inode and then the corresponding *_inode_file_wait function. Just make them static inlines instead. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>