| Age | Commit message (Collapse) | Author |
|---|
|
Add a helper to read number of fast commit blocks from jbd2 superblock
and also rename the JBD2_MIN_FC_BLKS to
JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the
default number of fast commit blocks to use in case number of fast
commit blocks isn't set in jbd2 superblock.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Kernel-doc markup should use this format:
identifier - description
They should not have any type before that, as otherwise
the parser won't do the right thing.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add missing __acquires() and __releases() annotations. Also, in an
"this should never happen" WARN_ON check, if it *does* actually
happen, we need to release j_state_lock since this function is always
supposed to release that lock. Otherwise, things will quickly grind
to a halt after the WARN_ON trips.
Fixes: 96f1e0974575 ("jbd2: avoid long hold times of j_state_lock...")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit should not be started if the journal is aborted.
Signed-off-by: Harshad Shirwadkar<harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-22-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Take journal state lock before reading journal->j_commit_sequence.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-13-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit buffers should be filled in before toucing their
state. Remove code that sets buffer state as dirty before the buffer
is passed to the file system.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-12-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fast commit performance can be optimized if commit thread doesn't wait
for ongoing fast commits to complete until the transaction enters
T_FLUSH state. Document this optimization.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-11-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In jbd2_fc_end_commit_fallback(), we know which tid to commit. There's
no need for caller to pass it.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Variables journal->j_fc_off, journal->j_fc_wbuf are accessed during
commit path. Since today we allow only one process to perform a fast
commit, there is no need take state lock before accessing these
variables. This patch removes these locks and adds comments to
describe this.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch removes jbd2_fc_init() API and its related functions to
simplify enabling fast commits. With this change, the number of fast
commit blocks to use is solely determined by the JBD2 layer. So, we
move the default value for minimum number of fast commit blocks from
ext4/fast_commit.h to include/linux/jbd2.h. However, whether or not to
use fast commits is determined by the file system. The file system
just sets the fast commit feature using
jbd2_journal_set_features(). JBD2 layer then determines how many
blocks to use for fast commits (based on the value found in the JBD2
superblock).
Note that the JBD2 feature flag of fast commits is just an indication
that there are fast commit blocks present on disk. It doesn't tell
JBD2 layer about the intent of the file system of whether to it wants
to use fast commit or not. That's why, we blindly clear the fast
commit flag in journal_reset() after the recovery is done.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The on-disk superblock field sb->s_maxlen represents the total size of
the journal including the fast commit area and is no more the max
number of blocks available for a transaction. The maximum number of
blocks available to a transaction is reduced by the number of fast
commit blocks. So, this patch renames j_maxlen to j_total_len to
better represent its intent. Also, it adds a function to calculate max
number of bufs available for a transaction.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201106035911.1942128-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds fast commit recovery support in JBD2.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This functions adds necessary APIs needed in JBD2 layer for fast
commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When ext4 is formatted with lazy_journal_init=1 and transactions from
the previous filesystem are still on disk, it is possible that they are
considered during a recovery after a crash. Because the checksum seed
has changed, the CRC check will fail, and the journal recovery fails
with checksum error although the journal is otherwise perfectly valid.
Fix the problem by checking commit block time stamps to determine
whether the data in the journal block is just stale or whether it is
indeed corrupt.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Fengnan Chang <changfengnan@hikvision.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201012164900.20197-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
j_submit|finish_inode_data_buffers()
Introduce journal callbacks to allow different behaviors
for an inode in journal_submit|finish_inode_data_buffers().
The existing users of the current behavior (ext4, ocfs2)
are adapted to use the previously exported functions
that implement the current behavior.
Users are callers of jbd2_journal_inode_ranged_write|wait(),
which adds the inode to the transaction's inode list with
the JI_WRITE|WAIT_DATA flags. Only ext4 and ocfs2 in-tree.
Both CONFIG_EXT4_FS and CONFIG_OCSFS2_FS select CONFIG_JBD2,
which builds fs/jbd2/commit.c and journal.c that define and
export the functions, so we can call directly in ext4/ocfs2.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-3-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Export functions that implement the current behavior done
for an inode in journal_submit|finish_inode_data_buffers().
No functional change.
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20201006004841.600488-2-mfo@canonical.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove the unnecessary chksum_err and checksum_seen variables as well as
some redundant code to make the function easier to understand.
[ With changes suggested by jack@ and tytso@ ]
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200819122955.33526-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove unnecessary blank.
Signed-off-by: Xianting Tian <xianting_tian@126.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1595077057-8048-1-git-send-email-xianting_tian@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Parameter gfp_mask in jbd2_journal_try_to_free_buffers() is no longer
used after commit <536fc240e7147> ("jbd2: clean up
jbd2_journal_try_to_free_buffers()"), so just remove it.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-6-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
jbd2_write_superblock()
jbd2_write_superblock() is under the buffer lock of journal superblock
before ending that superblock write, so add a missing unlock_buffer() in
in the error path before submitting buffer.
Fixes: 742b06b5628f ("jbd2: check superblock mapped prior to committing")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200620061948.2049579-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.
We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.
Tested with fstests.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull more ext4 updates from Ted Ts'o:
"This is the second round of ext4 commits for 5.8 merge window [1].
It includes the per-inode DAX support, which was dependant on the DAX
infrastructure which came in via the XFS tree, and a number of
regression and bug fixes; most notably the "BUG: using
smp_processor_id() in preemptible code in ext4_mb_new_blocks" reported
by syzkaller"
[1] The pull request actually came in 15 minutes after I had tagged the
rc1 release. Tssk, tssk, late.. - Linus
* tag 'ext4-for-linus-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4, jbd2: ensure panic by fix a race between jbd2 abort and ext4 error handlers
ext4: support xattr gnu.* namespace for the Hurd
ext4: mballoc: Use this_cpu_read instead of this_cpu_ptr
ext4: avoid utf8_strncasecmp() with unstable name
ext4: stop overwrite the errcode in ext4_setup_super
ext4: fix partial cluster initialization when splitting extent
ext4: avoid race conditions when remounting with options that change dax
Documentation/dax: Update DAX enablement for ext4
fs/ext4: Introduce DAX inode flag
fs/ext4: Remove jflag variable
fs/ext4: Make DAX mount option a tri-state
fs/ext4: Only change S_DAX on inode load
fs/ext4: Update ext4_should_use_dax()
fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS
fs/ext4: Disallow verity if inode is DAX
fs/ext4: Narrow scope of DAX check in setflags
|
|
handlers
In the ext4 filesystem with errors=panic, if one process is recording
errno in the superblock when invoking jbd2_journal_abort() due to some
error cases, it could be raced by another __ext4_abort() which is
setting the SB_RDONLY flag but missing panic because errno has not been
recorded.
jbd2_journal_commit_transaction()
jbd2_journal_abort()
journal->j_flags |= JBD2_ABORT;
jbd2_journal_update_sb_errno()
| ext4_journal_check_start()
| __ext4_abort()
| sb->s_flags |= SB_RDONLY;
| if (!JBD2_REC_ERR)
| return;
journal->j_flags |= JBD2_REC_ERR;
Finally, it will no longer trigger panic because the filesystem has
already been set read-only. Fix this by introduce j_abort_mutex to make
sure journal abort is completed before panic, and remove JBD2_REC_ERR
flag.
Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200609073540.3810702-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
|
|
When reserved transaction handle is unused, we subtract its reserved
credits in __jbd2_journal_unreserve_handle() called from
jbd2_journal_stop(). However this function forgets to remove reserved
credits from transaction->t_outstanding_credits and thus the transaction
space that was reserved remains effectively leaked. The leaked
transaction space can be quite significant in some cases and leads to
unnecessarily small transactions and thus reducing throughput of the
journalling machinery. E.g. fsmark workload creating lots of 4k files
was observed to have about 20% lower throughput due to this when ext4 is
mounted with dioread_nolock mount option.
Subtract reserved credits from t_outstanding_credits as well.
CC: stable@vger.kernel.org
Fixes: 8f7d89f36829 ("jbd2: transaction reservation support")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200520133119.1383-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.
Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,
LTP: starting fsync04
/dev/zero: Can't open blockdev
EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
==================================================================
BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]
write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
__jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
__jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
(inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
kjournald2+0x13b/0x450 [jbd2]
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
jbd2_write_access_granted+0x1b2/0x250 [jbd2]
jbd2_write_access_granted at fs/jbd2/transaction.c:1155
jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
__ext4_journal_get_write_access+0x50/0x90 [ext4]
ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
ext4_mb_new_blocks+0x54f/0xca0 [ext4]
ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
ext4_map_blocks+0x3b4/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block+0x3b/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
5 locks held by fsync04/25724:
#0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
#1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
#2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
#4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
irq event stamp: 1407125
hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
I found a NULL pointer dereference in ocfs2_block_group_clear_bits().
The running environment:
kernel version: 4.19
A cluster with two nodes, 5 luns mounted on two nodes, and do some
file operations like dd/fallocate/truncate/rm on every lun with storage
network disconnection.
The fallocate operation on dm-23-45 caused an null pointer dereference.
The information of NULL pointer dereference as follows:
[577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45.
[577992.878290] Aborting journal on device dm-23-45.
...
[577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46.
[577992.890908] __journal_remove_journal_head: freeing b_committed_data
[577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30
[577992.890918] __journal_remove_journal_head: freeing b_committed_data
[577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30
[577992.890922] __journal_remove_journal_head: freeing b_committed_data
[577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30
[577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30
[577992.890928] __journal_remove_journal_head: freeing b_committed_data
[577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30
[577992.890933] __journal_remove_journal_head: freeing b_committed_data
[577992.890939] __journal_remove_journal_head: freeing b_committed_data
[577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[577992.890950] Mem abort info:
[577992.890951] ESR = 0x96000004
[577992.890952] Exception class = DABT (current EL), IL = 32 bits
[577992.890952] SET = 0, FnV = 0
[577992.890953] EA = 0, S1PTW = 0
[577992.890954] Data abort info:
[577992.890955] ISV = 0, ISS = 0x00000004
[577992.890956] CM = 0, WnR = 0
[577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9
[577992.890960] [0000000000000020] pgd=0000000000000000
[577992.890964] Internal error: Oops: 96000004 [#1] SMP
[577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd)
[577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1
[577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
[577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO)
[577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2]
[577992.891084] sp : ffff0000c8e2b810
[577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000
[577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70
[577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2
[577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30
[577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000
[577992.891097] x19: ffff000001681638 x18: ffffffffffffffff
[577992.891098] x17: 0000000000000000 x16: ffff000080a03df0
[577992.891100] x15: ffff0000811d9708 x14: 203d207375746174
[577992.891101] x13: 73203a524f525245 x12: 20373439343a6565
[577992.891103] x11: 0000000000000038 x10: 0101010101010101
[577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f
[577992.891109] x7 : 0000000000000000 x6 : 0000000000000080
[577992.891110] x5 : 0000000000000000 x4 : 0000000000000002
[577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00
[577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000
[577992.891116] Call trace:
[577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2]
[577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2]
[577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2]
[577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2]
[577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2]
[577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2]
[577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2]
[577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2]
[577992.891316] vfs_fallocate+0x11c/0x250
[577992.891317] ksys_fallocate+0x54/0x88
[577992.891319] __arm64_sys_fallocate+0x28/0x38
[577992.891323] el0_svc_common+0x78/0x130
[577992.891325] el0_svc_handler+0x38/0x78
[577992.891327] el0_svc+0x8/0xc
My analysis process as follows:
ocfs2_fallocate
__ocfs2_change_file_space
ocfs2_allocate_extents
ocfs2_extend_allocation
ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
ocfs2_insert_extent
ocfs2_do_insert_extent
ocfs2_rotate_tree_right
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2_journal_restart
jbd2__journal_restart
/* handle->h_transaction is NULL,
* is_handle_aborted(handle) is true
*/
handle->h_transaction = NULL;
start_this_handle
return -EROFS;
ocfs2_free_clusters
_ocfs2_free_clusters
_ocfs2_free_suballoc_bits
ocfs2_block_group_clear_bits
ocfs2_journal_access_gd
__ocfs2_journal_access
jbd2_journal_get_undo_access
/* I think jbd2_write_access_granted() will
* return true, because do_get_write_access()
* will return -EROFS.
*/
if (jbd2_write_access_granted(...)) return 0;
do_get_write_access
/* handle->h_transaction is NULL, it will
* return -EROFS here, so do_get_write_access()
* was not called.
*/
if (is_handle_aborted(handle)) return -EROFS;
/* bh2jh(group_bh) is NULL, caused NULL
pointer dereference */
undo_bg = (struct ocfs2_group_desc *)
bh2jh(group_bh)->b_committed_data;
If handle->h_transaction == NULL, then jbd2_write_access_granted()
does not really guarantee that journal_head will stay around,
not even speaking of its b_committed_data. The bh2jh(group_bh)
can be removed after ocfs2_journal_access_gd() and before call
"bh2jh(group_bh)->b_committed_data". So, we should move
is_handle_aborted() check from do_get_write_access() into
jbd2_journal_get_undo_access() and jbd2_journal_get_write_access()
before the call to jbd2_write_access_granted().
Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes (all stable fodder)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve explanation of a mount failure caused by a misconfigured kernel
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
ext4: add cond_resched() to ext4_protect_reserved_inode
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: simplify checking quota limits in ext4_statfs()
ext4: don't assume that mmp_nodename/bdevname have NUL
|
|
Commit 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from
an older transaction") set the BH_Freed flag when forgetting a metadata
buffer which belongs to the committing transaction, it indicate the
committing process clear dirty bits when it is done with the buffer. But
it also clear the BH_Mapped flag at the same time, which may trigger
below NULL pointer oops when block_size < PAGE_SIZE.
rmdir 1 kjournald2 mkdir 2
jbd2_journal_commit_transaction
commit transaction N
jbd2_journal_forget
set_buffer_freed(bh1)
jbd2_journal_commit_transaction
commit transaction N+1
...
clear_buffer_mapped(bh1)
ext4_getblk(bh2 ummapped)
...
grow_dev_page
init_page_buffers
bh1->b_private=NULL
bh2->b_private=NULL
jbd2_journal_put_journal_head(jh1)
__journal_remove_journal_head(hb1)
jh1 is NULL and trigger oops
*) Dir entry block bh1 and bh2 belongs to one page, and the bh2 has
already been unmapped.
For the metadata buffer we forgetting, we should always keep the mapped
flag and clear the dirty flags is enough, so this patch pick out the
these buffers and keep their BH_Mapped flag.
Link: https://lore.kernel.org/r/20200213063821.30455-3-yi.zhang@huawei.com
Fixes: 904cdbd41d74 ("jbd2: clear dirty flag when revoking a buffer from an older transaction")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
There is no need to delay the clearing of b_modified flag to the
transaction committing time when unmapping the journalled buffer, so
just move it to the journal_unmap_buffer().
Link: https://lore.kernel.org/r/20200213063821.30455-2-yi.zhang@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
- bmap series from cmaiolino
- getting rid of convolutions in copy_mount_options() (use a couple of
copy_from_user() instead of the __get_user() crap)
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
saner copy_mount_options()
fibmap: Reject negative block numbers
fibmap: Use bmap instead of ->bmap method in ioctl_fibmap
ecryptfs: drop direct calls to ->bmap
cachefiles: drop direct usage of ->bmap method.
fs: Enable bmap() function to properly return errors
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
By now, bmap() will either return the physical block number related to
the requested file offset or 0 in case of error or the requested offset
maps into a hole.
This patch makes the needed changes to enable bmap() to proper return
errors, using the return value as an error return, and now, a pointer
must be passed to bmap() to be filled with the mapped physical block.
It will change the behavior of bmap() on return:
- negative value in case of error
- zero on success or map fell into a hole
In case of a hole, the *block will be zero too
Since this is a prep patch, by now, the only error return is -EINVAL if
->bmap doesn't exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__jbd2_journal_abort_hard() is no longer used, so now we can merge
__jbd2_journal_abort_hard() and __journal_abort_soft() these two
functions into jbd2_journal_abort() and remove them.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer") want
to allow jbd2 layer to distinguish shutdown journal abort from other
error cases. So the ESHUTDOWN should be taken precedence over any other
errno which has already been recoded after EXT4_FLAGS_SHUTDOWN is set,
but it only update errno in the journal suoerblock now if the old errno
is 0.
Fixes: fb7c02445c49 ("ext4: pass -ESHUTDOWN code to jbd2 layer")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
JBD2_REC_ERR flag used to indicate the errno has been updated when jbd2
aborted, and then __ext4_abort() and ext4_handle_error() can invoke
panic if ERRORS_PANIC is specified. But if the journal has been aborted
with zero errno, jbd2_journal_abort() didn't set this flag so we can
no longer panic. Fix this by always record the proper errno in the
journal superblock.
Fixes: 4327ba52afd03 ("ext4, jbd2: ensure entering into panic after recording an error in superblock")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We invoke jbd2_journal_abort() to abort the journal and record errno
in the jbd2 superblock when committing journal transaction besides the
failure on submitting the commit record. But there is no need for the
case and we can also invoke jbd2_journal_abort() instead of
__jbd2_journal_abort_hard().
Fixes: 818d276ceb83a ("ext4: Add the journal checksum feature")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Script below generates endless output
$ q=;while read -r r;do echo "$((++q)) $r";done </proc/fs/jbd2/DEV/info
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Cc: stable@kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d13805e5-695e-8ac3-b678-26ca2313629f@virtuozzo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Only when jh->b_jcount = 0 in jbd2_journal_put_journal_head, we are allowed
to call __journal_remove_journal_head. This assertion is meaningless,
just remove it.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123070054.50585-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fix comment and remove unneccessary blank.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123064325.36358-1-luoshijie1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Delete the duplicated words "is" in the comments
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/12087f77-ab4d-c7ba-53b4-893dbf0026f0@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
when load journal
If the journal is dirty when the filesystem is mounted, jbd2 will replay
the journal but the journal superblock will not be updated by
journal_reset() because JBD2_ABORT flag is still set (it was set in
journal_init_common()). This is problematic because when a new transaction
is then committed, it will be recorded in block 1 (journal->j_tail was set
to 1 in journal_reset()). If unclean shutdown happens again before the
journal superblock is updated, the new recorded transaction will not be
replayed during the next mount (because of stale sb->s_start and
sb->s_sequence values) which can lead to filesystem corruption.
Fixes: 85e0c4e89c1b ("jbd2: if the journal is aborted then don't allow update of the log tail")
Signed-off-by: Kai Li <li.kai4@h3c.com>
Link: https://lore.kernel.org/r/20200111022542.5008-1-li.kai4@h3c.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge window saw the the following new featuers added to ext4:
- Direct I/O via iomap (required the iomap-for-next branch from
Darrick as a prereq).
- Support for using dioread-nolock where the block size < page size.
- Support for encryption for file systems where the block size < page
size.
- Rework of journal credits handling so a revoke-heavy workload will
not cause the journal to run out of space.
- Replace bit-spinlocks with spinlocks in jbd2
Also included were some bug fixes and cleanups, mostly to clean up
corner cases from fuzzed file systems and error path handling"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (59 commits)
ext4: work around deleting a file with i_nlink == 0 safely
ext4: add more paranoia checking in ext4_expand_extra_isize handling
jbd2: make jbd2_handle_buffer_credits() handle reserved handles
ext4: fix a bug in ext4_wait_for_tail_page_commit
ext4: bio_alloc with __GFP_DIRECT_RECLAIM never fails
ext4: code cleanup for get_next_id
ext4: fix leak of quota reservations
ext4: remove unused variable warning in parse_options()
ext4: Enable encryption for subpage-sized blocks
fs/buffer.c: support fscrypt in block_read_full_page()
ext4: Add error handling for io_end_vec struct allocation
jbd2: Fine tune estimate of necessary descriptor blocks
jbd2: Provide trace event for handle restarts
ext4: Reserve revoke credits for freed blocks
jbd2: Make credit checking more strict
jbd2: Rename h_buffer_credits to h_total_credits
jbd2: Reserve space for revoke descriptor blocks
jbd2: Drop jbd2_space_needed()
jbd2: Account descriptor blocks into t_outstanding_credits
jbd2: Factor out common parts of stopping and restarting a handle
...
|
|
|
|
Currently we reserve j_max_transaction_buffers / 32 for transaction
descriptor blocks. Now that revoke descriptors are accounted for
separately this estimate is unnecessarily high and we can actually
compute much tighter estimate. In the common case of 32k journal blocks
and 4k blocksize this actually reduces the amount of reserved descriptor
blocks from 256 to ~25 which allows us to fit more real data into a
transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-25-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Provide trace event for handle restarts to ease debugging.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191105164437.32602-24-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
