summaryrefslogtreecommitdiff
path: root/fs/jbd2
AgeCommit message (Collapse)Author
2019-06-20jbd2: drop declaration of journal_sync_buffer()Theodore Ts'o
The journal_sync_buffer() function was never carried over from jbd to jbd2. So get rid of the vestigal declaration of this (non-existent) function. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-20jbd2: introduce jbd2_inode dirty range scopingRoss Zwisler
Currently both journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() operate on the entire address space of each of the inodes associated with a given journal entry. The consequence of this is that if we have an inode where we are constantly appending dirty pages we can end up waiting for an indefinite amount of time in journal_finish_inode_data_buffers() while we wait for all the pages under writeback to be written out. The easiest way to cause this type of workload is do just dd from /dev/zero to a file until it fills the entire filesystem. This can cause journal_finish_inode_data_buffers() to wait for the duration of the entire dd operation. We can improve this situation by scoping each of the inode dirty ranges associated with a given transaction. We do this via the jbd2_inode structure so that the scoping is contained within jbd2 and so that it follows the lifetime and locking rules for that structure. This allows us to limit the writeback & wait in journal_submit_inode_data_buffers() and journal_finish_inode_data_buffers() respectively to the dirty range for a given struct jdb2_inode, keeping us from waiting forever if the inode in question is still being appended to. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2019-05-30jbd2: fix typo in comment of journal_submit_inode_data_buffersLiu Song
delayed/dealyed Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-05-30jbd2: fix some print format mistakesGaowei Pu
There are some print format mistakes in debug messages. Fix them. Signed-off-by: Gaowei Pu <pugaowei@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10jbd2: fix potential double freeChengguang Xu
When failing from creating cache jbd2_inode_cache, we will destroy the previously created cache jbd2_handle_cache twice. This patch fixes this by moving each cache initialization/destruction to its own separate, individual function. Signed-off-by: Chengguang Xu <cgxu519@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2019-04-06jbd2: check superblock mapped prior to committingJiufei Xue
We hit a BUG at fs/buffer.c:3057 if we detached the nbd device before unmounting ext4 filesystem. The typical chain of events leading to the BUG: jbd2_write_superblock submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)); The block device is removed and all the pages are invalidated. JBD2 was trying to write journal superblock to the block device which is no longer present. Fix this by checking the journal superblock's buffer head prior to submitting. Reported-by: Eric Ren <renzhen@linux.alibaba.com> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org
2019-04-06jbd2: remove repeated assignments in __jbd2_log_wait_for_space()Liu Song
At the beginning, nblocks has been assigned. There is no need to repeat the assignment in the while loop, and remove it. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-01jbd2: jbd2_get_transaction does not need to return a valueLiu Song
In jbd2_get_transaction, a new transaction is initialized, and set to the j_running_transaction. No need for a return value, so remove it. Also, adjust some comments to match the actual operation of this function. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-03-01jbd2: fix invalid descriptor block checksumluojiajun
In jbd2_journal_commit_transaction(), if we are in abort mode, we may flush the buffer without setting descriptor block checksum by goto start_journal_io. Then fs is mounted, jbd2_descriptor_block_csum_verify() failed. [ 271.379811] EXT4-fs (vdd): shut down requested (2) [ 271.381827] Aborting journal on device vdd-8. [ 271.597136] JBD2: Invalid checksum recovering block 22199 in log [ 271.598023] JBD2: recovery failed [ 271.598484] EXT4-fs (vdd): error loading journal Fix this problem by keep setting descriptor block checksum if the descriptor buffer is not NULL. This checksum problem can be reproduced by xfstests generic/388. Signed-off-by: luojiajun <luojiajun3@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-21jbd2: fix compile warning when using JBUFFER_TRACEzhangyi (F)
The jh pointer may be used uninitialized in the two cases below and the compiler complain about it when enabling JBUFFER_TRACE macro, fix them. In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_get_undo_access’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ is used uninitialized in this function [-Wuninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1219:23: note: ‘jh’ was declared here struct journal_head *jh; ^ In file included from fs/jbd2/transaction.c:19:0: fs/jbd2/transaction.c: In function ‘jbd2_journal_dirty_metadata’: ./include/linux/jbd2.h:1637:38: warning: ‘jh’ may be used uninitialized in this function [-Wmaybe-uninitialized] #define JBUFFER_TRACE(jh, info) do { printk("%s: %d\n", __func__, jh->b_jcount);} while (0) ^ fs/jbd2/transaction.c:1332:23: note: ‘jh’ was declared here struct journal_head *jh; ^ Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-14jbd2: fold jbd2_superblock_csum_{verify,set} into their callersTheodore Ts'o
The functions jbd2_superblock_csum_verify() and jbd2_superblock_csum_set() only get called from one location, so to simplify things, fold them into their callers. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-14jbd2: fix race when writing superblockTheodore Ts'o
The jbd2 superblock is lockless now, so there is probably a race condition between writing it so disk and modifing contents of it, which may lead to checksum error. The following race is the one case that we have captured. jbd2 fsstress jbd2_journal_commit_transaction jbd2_journal_update_sb_log_tail jbd2_write_superblock jbd2_superblock_csum_set jbd2_journal_revoke jbd2_journal_set_features(revork) modify superblock submit_bh(checksum incorrect) Fix this by locking the buffer head before modifing it. We always write the jbd2 superblock after we modify it, so this just means calling the lock_buffer() a little earlier. This checksum corruption problem can be reproduced by xfstests generic/475. Reported-by: zhangyi (F) <yi.zhang@huawei.com> Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-02-10jbd2: discard dirty data when forgetting an un-journalled bufferzhangyi (F)
We do not unmap and clear dirty flag when forgetting a buffer without journal or does not belongs to any transaction, so the invalid dirty data may still be written to the disk later. It's fine if the corresponding block is never used before the next mount, and it's also fine that we invoke clean_bdev_aliases() related functions to unmap the block device mapping when re-allocating such freed block as data block. But this logic is somewhat fragile and risky that may lead to data corruption if we forget to clean bdev aliases. So, It's better to discard dirty data during forget time. We have been already handled all the cases of forgetting journalled buffer, this patch deal with the remaining two cases. - buffer is not journalled yet, - buffer is journalled but doesn't belongs to any transaction. We invoke __bforget() instead of __brelese() when forgetting an un-journalled buffer in jbd2_journal_forget(). After this patch we can remove all clean_bdev_aliases() related calls in ext4. Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-02-10jbd2: clear dirty flag when revoking a buffer from an older transactionzhangyi (F)
Now, we capture a data corruption problem on ext4 while we're truncating an extent index block. Imaging that if we are revoking a buffer which has been journaled by the committing transaction, the buffer's jbddirty flag will not be cleared in jbd2_journal_forget(), so the commit code will set the buffer dirty flag again after refile the buffer. fsx kjournald2 jbd2_journal_commit_transaction jbd2_journal_revoke commit phase 1~5... jbd2_journal_forget belongs to older transaction commit phase 6 jbddirty not clear __jbd2_journal_refile_buffer __jbd2_journal_unfile_buffer test_clear_buffer_jbddirty mark_buffer_dirty Finally, if the freed extent index block was allocated again as data block by some other files, it may corrupt the file data after writing cached pages later, such as during unmount time. (In general, clean_bdev_aliases() related helpers should be invoked after re-allocation to prevent the above corruption, but unfortunately we missed it when zeroout the head of extra extent blocks in ext4_ext_handle_unwritten_extents()). This patch mark buffer as freed and set j_next_transaction to the new transaction when it already belongs to the committing transaction in jbd2_journal_forget(), so that commit code knows it should clear dirty bits when it is done with the buffer. This problem can be reproduced by xfstests generic/455 easily with seeds (3246 3247 3248 3249). Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2019-01-31jbd2: fix deadlock while checkpoint thread waits commit thread to finishXiaoguang Wang
This issue was found when I tried to put checkpoint work in a separate thread, the deadlock below happened: Thread1 | Thread2 __jbd2_log_wait_for_space | jbd2_log_do_checkpoint (hold j_checkpoint_mutex)| if (jh->b_transaction != NULL) | ... | jbd2_log_start_commit(journal, tid); |jbd2_update_log_tail | will lock j_checkpoint_mutex, | but will be blocked here. | jbd2_log_wait_commit(journal, tid); | wait_event(journal->j_wait_done_commit, | !tid_gt(tid, journal->j_commit_sequence)); | ... |wake_up(j_wait_done_commit) } | then deadlock occurs, Thread1 will never be waken up. To fix this issue, drop j_checkpoint_mutex in jbd2_log_do_checkpoint() when we are going to wait for transaction commit. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-04jbd2: clean up indentation issue, replace spaces with tabColin Ian King
There is a statement that is indented with spaces, replace it with a tab. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-12-03jbd2: avoid long hold times of j_state_lock while committing a transactionJan Kara
We can hold j_state_lock for writing at the beginning of jbd2_journal_commit_transaction() for a rather long time (reportedly for 30 ms) due cleaning revoke bits of all revoked buffers under it. The handling of revoke tables as well as cleaning of t_reserved_list, and checkpoint lists does not need j_state_lock for anything. It is only needed to prevent new handles from joining the transaction. Generally T_LOCKED transaction state prevents new handles from joining the transaction - except for reserved handles which have to allowed to join while we wait for other handles to complete. To prevent reserved handles from joining the transaction while cleaning up lists, add new transaction state T_SWITCH and watch for it when starting reserved handles. With this we can just drop the lock for operations that don't need it. Reported-and-tested-by: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: "Theodore Y. Ts'o" <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-10-05jbd2: fix use after free in jbd2_log_do_checkpoint()Jan Kara
The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-29jbd2: replace current_kernel_time64 with ktime equivalentArnd Bergmann
jbd2 is one of the few callers of current_kernel_time64(), which is a wrapper around ktime_get_coarse_real_ts64(). This calls the latter directly for consistency with the rest of the kernel that is moving to the ktime_get_ family of time accessors. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-08Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "Bug fixes for ext4; most of which relate to vulnerabilities where a maliciously crafted file system image can result in a kernel OOPS or hang. At least one fix addresses an inline data bug could be triggered by userspace without the need of a crafted file system (although it does require that the inline data feature be enabled)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: check superblock mapped prior to committing ext4: add more mount time checks of the superblock ext4: add more inode number paranoia checks ext4: avoid running out of journal credits when appending to an inline file jbd2: don't mark block as modified if the handle is out of credits ext4: never move the system.data xattr out of the inode body ext4: clear i_data in ext4_inode_info when removing inline data ext4: include the illegal physical block in the bad map ext4_error msg ext4: verify the depth of extent tree in ext4_find_extent() ext4: only look at the bg_flags field if it is valid ext4: make sure bitmaps and the inode table don't overlap with bg descriptors ext4: always check block group bounds in ext4_init_block_bitmap() ext4: always verify the magic number in xattr blocks ext4: add corruption check in ext4_xattr_set_entry() ext4: add warn_on_error mount option
2018-06-16jbd2: don't mark block as modified if the handle is out of creditsTheodore Ts'o
Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-20jbd2: remove NULL check before calling kmem_cache_destroy()Wang Long
The kmem_cache_destroy() function already checks for null pointers, so we can remove the check at the call site. This patch also sets jbd2_handle_cache and jbd2_inode_cache to be NULL after freeing them in jbd2_journal_destroy_handle_cache(). Signed-off-by: Wang Long <wanglong19@meituan.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2018-05-20jbd2: remove bunch of empty lines with jbd2 debugWang Shilong
See following dmesg output with jbd2 debug enabled: ...(start_this_handle, 313): New handle 00000000c88d6ceb going live. ...(start_this_handle, 383): Handle 00000000c88d6ceb given 53 credits (total 53, free 32681) ...(do_get_write_access, 838): journal_head 0000000002856fc0, force_copy 0 ...(jbd2_journal_cancel_revoke, 421): journal_head 0000000002856fc0, cancelling revoke We have an extra line with every messages, this is a waste of buffer, we can fix it by removing "\n" in the caller or remove it in the __jbd2_debug(), i checked every jbd2_debug() passed '\n' explicitly. To avoid more lines, let's remove it inside __jbd2_debug(). Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2018-04-18ext4: set h_journal if there is a failure starting a reserved handleTheodore Ts'o
If ext4 tries to start a reserved handle via jbd2_journal_start_reserved(), and the journal has been aborted, this can result in a NULL pointer dereference. This is because the fields h_journal and h_transaction in the handle structure share the same memory, via a union, so jbd2_journal_start_reserved() will clear h_journal before calling start_this_handle(). If this function fails due to an aborted handle, h_journal will still be NULL, and the call to jbd2_journal_free_reserved() will pass a NULL journal to sub_reserve_credits(). This can be reproduced by running "kvm-xfstests -c dioread_nolock generic/475". Cc: stable@kernel.org # 3.11 Fixes: 8f7d89f36829b ("jbd2: transaction reservation support") Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz>
2018-02-19jbd2: if the journal is aborted then don't allow update of the log tailTheodore Ts'o
This updates the jbd2 superblock unnecessarily, and on an abort we shouldn't truncate the log. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2018-02-18ext4: pass -ESHUTDOWN code to jbd2 layerTheodore Ts'o
Previously the jbd2 layer assumed that a file system check would be required after a journal abort. In the case of the deliberate file system shutdown, this should not be necessary. Allow the jbd2 layer to distinguish between these two cases by using the ESHUTDOWN errno. Also add proper locking to __journal_abort_soft(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2018-02-18jbd2: clarify bad journal block checksum messageTheodore Ts'o
There were two error messages emitted by jbd2, one for a bad checksum for a jbd2 descriptor block, and one for a bad checksum for a jbd2 data block. Change the data block checksum error so that the two can be disambiguated. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-10jbd2: fix sphinx kernel-doc build warningsTobin C. Harding
Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs. Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-12-17ext4: fix up remaining files with SPDX cleanupsTheodore Ts'o
A number of ext4 source files were skipped due because their copyright permission statements didn't match the expected text used by the automated conversion utilities. I've added SPDX tags for the rest. While looking at some of these files, I've noticed that we have quite a bit of variation on the licenses that were used --- in particular some of the Red Hat licenses on the jbd2 files use a GPL2+ license, and we have some files that have a LGPL-2.1 license (which was quite surprising). I've not attempted to do any license changes. Even if it is perfectly legal to relicense to GPL 2.0-only for consistency's sake, that should be done with ext4 developer community discussion. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-11-17Merge tag 'libnvdimm-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>" * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
2017-11-03ext4: Support for synchronous DAX faultsJan Kara
We return IOMAP_F_DIRTY flag from ext4_iomap_begin() when asked to prepare blocks for writing and the inode has some uncommitted metadata changes. In the fault handler ext4_dax_fault() we then detect this case (through VM_FAULT_NEEDDSYNC return value) and call helper dax_finish_sync_fault() to flush metadata changes and insert page table entry. Note that this will also dirty corresponding radix tree entry which is what we want - fsync(2) will still provide data integrity guarantees for applications not using userspace flushing. And applications using userspace flushing can avoid calling fsync(2) and thus avoid the performance overhead. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-18jbd2: convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.com> Cc: linux-ext4@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de>
2017-07-07Merge tag 'for-linus-v4.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull Writeback error handling updates from Jeff Layton: "This pile represents the bulk of the writeback error handling fixes that I have for this cycle. Some of the earlier patches in this pile may look trivial but they are prerequisites for later patches in the series. The aim of this set is to improve how we track and report writeback errors to userland. Most applications that care about data integrity will periodically call fsync/fdatasync/msync to ensure that their writes have made it to the backing store. For a very long time, we have tracked writeback errors using two flags in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a writeback error occurs (via mapping_set_error) and are cleared as a side-effect of filemap_check_errors (as you noted yesterday). This model really sucks for userland. Only the first task to call fsync (or msync or fdatasync) will see the error. Any subsequent task calling fsync on a file will get back 0 (unless another writeback error occurs in the interim). If I have several tasks writing to a file and calling fsync to ensure that their writes got stored, then I need to have them coordinate with one another. That's difficult enough, but in a world of containerized setups that coordination may even not be possible. But wait...it gets worse! The calls to filemap_check_errors can be buried pretty far down in the call stack, and there are internal callers of filemap_write_and_wait and the like that also end up clearing those errors. Many of those callers ignore the error return from that function or return it to userland at nonsensical times (e.g. truncate() or stat()). If I get back -EIO on a truncate, there is no reason to think that it was because some previous writeback failed, and a subsequent fsync() will (incorrectly) return 0. This pile aims to do three things: 1) ensure that when a writeback error occurs that that error will be reported to userland on a subsequent fsync/fdatasync/msync call, regardless of what internal callers are doing 2) report writeback errors on all file descriptions that were open at the time that the error occurred. This is a user-visible change, but I think most applications are written to assume this behavior anyway. Those that aren't are unlikely to be hurt by it. 3) document what filesystems should do when there is a writeback error. Today, there is very little consistency between them, and a lot of cargo-cult copying. We need to make it very clear what filesystems should do in this situation. To achieve this, the set adds a new data type (errseq_t) and then builds new writeback error tracking infrastructure around that. Once all of that is in place, we change the filesystems to use the new infrastructure for reporting wb errors to userland. Note that this is just the initial foray into cleaning up this mess. There is a lot of work remaining here: 1) convert the rest of the filesystems in a similar fashion. Once the initial set is in, then I think most other fs' will be fairly simple to convert. Hopefully most of those can in via individual filesystem trees. 2) convert internal waiters on writeback to use errseq_t for detecting errors instead of relying on the AS_* flags. I have some draft patches for this for ext4, but they are not quite ready for prime time yet. This was a discussion topic this year at LSF/MM too. If you're interested in the gory details, LWN has some good articles about this: https://lwn.net/Articles/718734/ https://lwn.net/Articles/724307/" * tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: btrfs: minimal conversion to errseq_t writeback error reporting on fsync xfs: minimal conversion to errseq_t writeback error reporting ext4: use errseq_t based error handling for reporting data writeback errors fs: convert __generic_file_fsync to use errseq_t based reporting block: convert to errseq_t based writeback error tracking dax: set errors in mapping when writeback fails Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error fs: new infrastructure for writeback error handling and reporting lib: add errseq_t type and infrastructure for handling it mm: don't TestClearPageError in __filemap_fdatawait_range mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails jbd2: don't clear and reset errors after waiting on writeback buffer: set errors in mapping at the time that the error occurs fs: check for writeback errors after syncing out buffers in generic_file_fsync buffer: use mapping_set_error instead of setting the flag mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-06jbd2: don't clear and reset errors after waiting on writebackJeff Layton
Resetting this flag is almost certainly racy, and will be problematic with some coming changes. Make filemap_fdatawait_keep_errors return int, but not clear the flag(s). Have jbd2 call it instead of filemap_fdatawait and don't attempt to re-set the error flag if it fails. Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-07-03Merge tag 'docs-4.13' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "There has been a fair amount of activity in the docs tree this time around. Highlights include: - Conversion of a bunch of security documentation into RST - The conversion of the remaining DocBook templates by The Amazing Mauro Machine. We can now drop the entire DocBook build chain. - The usual collection of fixes and minor updates" * tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits) scripts/kernel-doc: handle DECLARE_HASHTABLE Documentation: atomic_ops.txt is core-api/atomic_ops.rst Docs: clean up some DocBook loose ends Make the main documentation title less Geocities Docs: Use kernel-figure in vidioc-g-selection.rst Docs: fix table problems in ras.rst Docs: Fix breakage with Sphinx 1.5 and upper Docs: Include the Latex "ifthen" package doc/kokr/howto: Only send regression fixes after -rc1 docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters doc: Document suitability of IBM Verse for kernel development Doc: fix a markup error in coding-style.rst docs: driver-api: i2c: remove some outdated information Documentation: DMA API: fix a typo in a function name Docs: Insert missing space to separate link from text doc/ko_KR/memory-barriers: Update control-dependencies example Documentation, kbuild: fix typo "minimun" -> "minimum" docs: Fix some formatting issues in request-key.rst doc: ReSTify keys-trusted-encrypted.txt doc: ReSTify keys-request-key.txt ...
2017-06-20sched/wait: Standardize 'struct wait_bit_queue' wait-queue entry field nameIngo Molnar
Rename 'struct wait_bit_queue::wait' to ::wq_entry, to more clearly name it as a wait-queue entry. Propagate it to a couple of usage sites where the wait-bit-queue internals are exposed. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-21jbd2: preserve original nofs flag during journal restartTahsin Erdogan
When a transaction starts, start_this_handle() saves current PF_MEMALLOC_NOFS value so that it can be restored at journal stop time. Journal restart is a special case that calls start_this_handle() without stopping the transaction. start_this_handle() isn't aware that the original value is already stored so it overwrites it with current value. For instance, a call sequence like below leaves PF_MEMALLOC_NOFS flag set at the end: jbd2_journal_start() jbd2__journal_restart() jbd2_journal_stop() Make jbd2__journal_restart() restore the original value before calling start_this_handle(). Fixes: 81378da64de6 ("jbd2: mark the transaction context with the scope GFP_NOFS context") Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2017-05-18Merge remote-tracking branch 'mauro-exp/docbook3' into death-to-docbookJonathan Corbet
Mauro says: This patch series convert the remaining DocBooks to ReST. The first version was originally send as 3 patch series: [PATCH 00/36] Convert DocBook documents to ReST [PATCH 0/5] Convert more books to ReST [PATCH 00/13] Get rid of DocBook The lsm book was added as if it were a text file under Documentation. The plan is to merge it with another file under Documentation/security, after both this series and a security Documentation patch series gets merged. It also adjusts some Sphinx-pedantic errors/warnings on some kernel-doc markups. I also added some patches here to add PDF output for all existing ReST books.
2017-05-16fs: jbd2: escape a string with special chars on a kernel-docMauro Carvalho Chehab
kernel-doc will try to interpret a foo() string, except if properly escaped. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-16fs: jbd2: make jbd2_journal_start() kernel-doc parseableMauro Carvalho Chehab
kernel-doc script expects that a function documentation to be just before the function, otherwise it will be ignored. So, move the kernel-doc markup to the right place. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-05-10Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes are: - Debloat RCU headers - Parallelize SRCU callback handling (plus overlapping patches) - Improve the performance of Tree SRCU on a CPU-hotplug stress test - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Open-code the rcu_cblist_n_lazy_cbs() function rcu: Open-code the rcu_cblist_n_cbs() function rcu: Open-code the rcu_cblist_empty() function rcu: Separately compile large rcu_segcblist functions srcu: Debloat the <linux/rcu_segcblist.h> header srcu: Adjust default auto-expediting holdoff srcu: Specify auto-expedite holdoff time srcu: Expedite first synchronize_srcu() when idle srcu: Expedited grace periods with reduced memory contention srcu: Make rcutorture writer stalls print SRCU GP state srcu: Exact tracking of srcu_data structures containing callbacks srcu: Make SRCU be built by default srcu: Fix Kconfig botch when SRCU not selected rcu: Make non-preemptive schedule be Tasks RCU quiescent state srcu: Expedite srcu_schedule_cbs_snp() callback invocation srcu: Parallelize callback handling kvm: Move srcu_struct fields to end of struct kvm rcu: Fix typo in PER_RCU_NODE_PERIOD header comment rcu: Use true/false in assignment to bool rcu: Use bool value directly ...
2017-05-08Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: - add GETFSMAP support - some performance improvements for very large file systems and for random write workloads into a preallocated file - bug fixes and cleanups. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: cleanup write flags handling from jbd2_write_superblock() ext4: mark superblock writes synchronous for nobarrier mounts ext4: inherit encryption xattr before other xattrs ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio() ext4: avoid unnecessary transaction stalls during writeback ext4: preload block group descriptors ext4: make ext4_shutdown() static ext4: support GETFSMAP ioctls vfs: add common GETFSMAP ioctl definitions ext4: evict inline data when writing to memory map ext4: remove ext4_xattr_check_entry() ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries() ext4: merge ext4_xattr_list() into ext4_listxattr() ext4: constify static data that is never modified ext4: trim return value and 'dir' argument from ext4_insert_dentry() jbd2: fix dbench4 performance regression for 'nobarrier' mounts jbd2: Fix lockdep splat with generic/270 test mm: retry writepages() on ENOMEM when doing an data integrity writeback
2017-05-04jbd2: cleanup write flags handling from jbd2_write_superblock()Jan Kara
Currently jbd2_write_superblock() silently adds REQ_SYNC to flags with which journal superblock is written. Make this explicit by making flags passed down to jbd2_write_superblock() contain REQ_SYNC. CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-03jbd2: make the whole kjournald2 kthread NOFS safeMichal Hocko
kjournald2 is central to the transaction commit processing. As such any potential allocation from this kernel thread has to be GFP_NOFS. Make sure to mark the whole kernel thread GFP_NOFS by the memalloc_nofs_save. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170306131408.9828-8-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: David Sterba <dsterba@suse.cz> Cc: Brian Foster <bfoster@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03jbd2: mark the transaction context with the scope GFP_NOFS contextMichal Hocko
now that we have memalloc_nofs_{save,restore} api we can mark the whole transaction context as implicitly GFP_NOFS. All allocations will automatically inherit GFP_NOFS this way. This means that we do not have to mark any of those requests with GFP_NOFS and moreover all the ext4_kv[mz]alloc(GFP_NOFS) are also safe now because even the hardcoded GFP_KERNEL allocations deep inside the vmalloc will be NOFS now. [akpm@linux-foundation.org: tweak comments] Link: http://lkml.kernel.org/r/20170306131408.9828-7-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: David Sterba <dsterba@suse.cz> Cc: Brian Foster <bfoster@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Nikolay Borisov <nborisov@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-29jbd2: fix dbench4 performance regression for 'nobarrier' mountsJan Kara
Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as synchronous" removed REQ_SYNC flag from WRITE_FUA implementation. Since JBD2 strips REQ_FUA and REQ_FLUSH flags from submitted IO when the filesystem is mounted with nobarrier mount option, journal superblock writes ended up being async writes after this patch and that caused heavy performance regression for dbench4 benchmark with high number of processes. In my test setup with HP RAID array with non-volatile write cache and 32 GB ram, dbench4 runs with 8 processes regressed by ~25%. Fix the problem by making sure journal superblock writes are always treated as synchronous since they generally block progress of the journalling machinery and thus the whole filesystem. Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-04-29jbd2: Fix lockdep splat with generic/270 testJan Kara
I've hit a lockdep splat with generic/270 test complaining that: 3216.fsstress.b/3533 is trying to acquire lock: (jbd2_handle){++++..}, at: [<ffffffff813152e0>] jbd2_log_wait_commit+0x0/0x150 but task is already holding lock: (jbd2_handle){++++..}, at: [<ffffffff8130bd3b>] start_this_handle+0x35b/0x850 The underlying problem is that jbd2_journal_force_commit_nested() (called from ext4_should_retry_alloc()) may get called while a transaction handle is started. In such case it takes care to not wait for commit of the running transaction (which would deadlock) but only for a commit of a transaction that is already committing (which is safe as that doesn't wait for any filesystem locks). In fact there are also other callers of jbd2_log_wait_commit() that take care to pass tid of a transaction that is already committing and for those cases, the lockdep instrumentation is too restrictive and leading to false positive reports. Fix the problem by calling jbd2_might_wait_for_commit() from jbd2_log_wait_commit() only if the transaction isn't already committing. Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-04-23Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - Parallelize SRCU callback handling (plus overlapping patches). Signed-off-by: Ingo Molnar <mingo@kernel.org>