summaryrefslogtreecommitdiff
path: root/fs/gfs2/util.h
AgeCommit message (Collapse)Author
2020-02-27gfs2: flesh out delayed withdraw for gfs2_log_flushBob Peterson
Function gfs2_log_flush() had a few places where it tried to withdraw from the file system when errors were encountered. The problem is, it should delay those withdraws until the log flush lock is no longer held. This patch creates a new function just for delayed withdraws for situations like this. If errors=panic was specified on mount, we still want to do it the old fashioned way because the panic it does not help to delay in that situation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-02-27gfs2: Add verbose option to check_journal_cleanBob Peterson
Before this patch, function check_journal_clean would give messages related to journal recovery. That's fine for mount time, but when a node withdraws and forces replay that way, we don't want all those distracting and misleading messages. This patch adds a new parameter to make those messages optional. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-02-10gfs2: move check_journal_clean to util.c for future useBob Peterson
Before this patch function check_journal_clean was in ops_fstype.c. This patch moves it to util.c so we can make use of it elsewhere in a future patch. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-02-10gfs2: Introduce concept of a pending withdrawBob Peterson
File system withdraws can be delayed when inconsistencies are discovered when we cannot withdraw immediately, for example, when critical spin_locks are held. But delaying the withdraw can cause gfs2 to ignore the error and keep running for a short period of time. For example, an rgrp glock may be dequeued and demoted while there are still buffers that haven't been properly revoked, due to io errors writing to the journal. This patch introduces a new concept of a pending withdraw, which means an inconsistency has been discovered and we need to withdraw at the earliest possible opportunity. In these cases, we aren't quite withdrawn yet, but we still need to not dequeue glocks and other critical things. If we dequeue the glocks and the withdraw results in our journal being replayed, the replay could overwrite data that's been modified by a different node that acquired the glock in the meantime. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-02-10gfs2: Return bool from gfs2_assert functionsAndreas Gruenbacher
The gfs2_assert functions only print messages when the filesystem hasn't been withdrawn yet, and they indicate whether or not they've printed something in their return value. However, none of the callers use that information, so simply return whether or not the assert has failed. (The gfs2_assert functions are still backwards; they return false when an assertion is true.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-02-10gfs2: Turn gfs2_consist into void functionsAndreas Gruenbacher
Change the various gfs2_consist functions to return void. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-02-10gfs2: Remove usused cluster_wide arguments of gfs2_consist functionsAndreas Gruenbacher
These arguments are always passed as 0, and they are never evaluated. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2020-02-10gfs2: Split gfs2_lm_withdraw into two functionsAndreas Gruenbacher
Split gfs2_lm_withdraw into a function that prints an error message and a function that withdraws the filesystem. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2019-11-14gfs2: Introduce function gfs2_withdrawnBob Peterson
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN bit to call it. This does not change the logic or function of gfs2, and it facilitates later improvements to the withdraw sequence. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398Thomas Gleixner
Based on 1 normalized pattern(s): this copyrighted material is made available to anyone wishing to use modify copy or redistribute it subject to the terms and conditions of the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 44 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05gfs2: Use fs_* functions instead of pr_* function where we canBob Peterson
Before this patch, various errors and messages were reported using the pr_* functions: pr_err, pr_warn, pr_info, etc., but that does not tell you which gfs2 mount had the problem, which is often vital to debugging. This patch changes the calls from pr_* to fs_* in most of the messages so that the file system id is printed along with the message. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-06-21gfs2: Don't withdraw under a spin lockAndreas Gruenbacher
In two places, the gfs2_io_error_bh macro is called while holding the sd_ail_lock spin lock. This isn't allowed because gfs2_io_error_bh withdraws the filesystem, which can sleep because it issues a uevent. To fix that, add a gfs2_io_error_bh_wd macro that does withdraw the filesystem and change gfs2_io_error_bh to not withdraw the filesystem. In those places where the new gfs2_io_error_bh is used, withdraw the filesystem after releasing sd_ail_lock. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andrew Price <anprice@redhat.com>
2017-08-25GFS2: Fix up some sparse warningsBob Peterson
This patch cleans up various pieces of GFS2 to avoid sparse errors. This doesn't fix them all, but it fixes several. The first error, in function glock_hash_walk was a genuine bug where the rhashtable could be started and not stopped. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-12-14GFS2: Make rgrp reservations part of the gfs2_inode structureBob Peterson
Before this patch, multi-block reservation structures were allocated from a special slab. This patch folds the structure into the gfs2_inode structure. The disadvantage is that the gfs2_inode needs more memory, even when a file is opened read-only. The advantages are: (a) we don't need the special slab and the extra time it takes to allocate and deallocate from it. (b) we no longer need to worry that the structure exists for things like quota management. (c) This also allows us to remove the calls to get_write_access and put_write_access since we know the structure will exist. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-11-24GFS2: Extract quota data from reservations structure (revert 5407e24)Bob Peterson
This patch basically reverts the majority of patch 5407e24. That patch eliminated the gfs2_qadata structure in favor of just using the reservations structure. The problem with doing that is that it increases the size of the reservations structure. That is not an issue until it comes time to fold the reservations structure into the inode in memory so we know it's always there. By separating out the quota structure again, we aren't punishing the non-quota users by making all the inodes bigger, requiring more slab space. This patch creates a new slab area to allocate the quota stuff so it's managed a little more sanely. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2014-03-07GFS2: Convert gfs2_lm_withdraw to use fs_errJoe Perches
vprintk use is not prefixed by a KERN_<LEVEL>, so emit these messages at KERN_ERR level. Using %pV can save some code and allow fs_err to be used, so do it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Use fs_<level> more oftenJoe Perches
Convert a couple of uses of pr_<level> to fs_<level> Add and use fs_emerg. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Use pr_<level> more consistentlyJoe Perches
Add pr_fmt, remove embedded "GFS2: " prefixes. This now consistently emits lower case "gfs2: " for each message. Other miscellanea around these changes: o Add missing newlines o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-10-02GFS2: Move gfs2_icbit_munge into quota.cSteven Whitehouse
This function is only called twice, and both callers are quota related, so lets move this function into quota.c and make it static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-06GFS2: Fix error handling when reading an invalid block from the journalSteven Whitehouse
When we read an invalid block from the journal, we should not call withdraw, but simply print a message and return an error. It is up to the caller to then handle that error. In the case of mount that means a failed mount, rather than a withdraw (requiring a reboot). In the case of recovering another nodes journal then we return an error via the uevent. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24GFS2: Clean up log write code pathSteven Whitehouse
Prior to this patch, we have two ways of sending i/o to the log. One of those is used when we need to allocate both the data to be written itself and also a buffer head to submit it. This is done via sb_getblk and friends. This is used mostly for writing log headers. The other method is used when writing blocks which have some in-place counterpart. This is the case for all the metadata blocks which are journalled, and when journaled data is in use, for unescaped journalled data blocks. This patch replaces both of those two methods, and about half a dozen separate i/o submission points with a single i/o submission function. We also go direct to bio rather than using buffer heads, since this allows us to build i/o requests of the maximum size for the block device in question. It also reduces the memory required for flushing the log, which can be very useful in low memory situations. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-04-24GFS2: Use slab for block reservation memoryBob Peterson
This patch changes block reservations so it uses slab storage. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-03-08GFS2: Remove a __GFP_NOFAIL allocationSteven Whitehouse
In order to ensure that we've got enough buffer heads for flushing the journal, the orignal code used __GFP_NOFAIL when performing this allocation. Here we dispense with that in favour of using a mempool. This should improve efficiency in low memory conditions since flushing the journal is a good way to get memory back, we don't want to be spinning, waiting on memory allocations. The buffers which are allocated via this mempool are fairly short lived, so that we'll recycle them pretty quickly. Although there are other memory allocations which occur during the journal flush process, this is the one which can potentially require the most memory, so the most important one to fix. The amount of memory reserved is a fixed amount, and we should not need to scale it when there are a greater number of filesystems in use. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-01GFS2: Metadata address space clean upSteven Whitehouse
Since the start of GFS2, an "extra" inode has been used to store the metadata belonging to each inode. The only reason for using this inode was to have an extra address space, the other fields were unused. This means that the memory usage was rather inefficient. The reason for keeping each inode's metadata in a separate address space is that when glocks are requested on remote nodes, we need to be able to efficiently locate the data and metadata which relating to that glock (inode) in order to sync or sync and invalidate it (depending on the remotely requested lock mode). This patch adds a new type of glock, which has in addition to its normal fields, has an address space. This applies to all inode and rgrp glocks (but to no other glock types which remain as before). As a result, we no longer need to have the second inode. This results in three major improvements: 1. A saving of approx 25% of memory used in caching inodes 2. A removal of the circular dependency between inodes and glocks 3. No confusion between "normal" and "metadata" inodes in super.c Although the first of these is the more immediately apparent, the second is just as important as it now enables a number of clean ups at umount time. Those will be the subject of future patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-01-05GFS2: Clean up & move gfs2_quotadSteven Whitehouse
This patch is a clean up of gfs2_quotad prior to giving it an extra job to do in addition to the current portfolio of updating the quota and statfs information from time to time. As a result it has been moved into quota.c allowing one of the functions it calls to be made static. Also the clean up allows the two existing functions to have separate timeouts and also to coexist with its future role of dealing with the "truncate in progress" inode flag. The (pointless) setting of gfs2_quotad_secs is removed since we arrange to only wake up quotad when one of the two timers expires. In addition the struct gfs2_quota_data is moved into a slab cache, mainly for easier debugging. It should also be possible to use a shrinker in the future, rather than the current scheme of scanning the quota data entries from time to time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-30fs: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-31[GFS2] Remove lm.[ch] and distribute contentSteven Whitehouse
The functions in lm.c were just wrappers which were mostly only used in one other file. By moving the functions to the files where they are being used, they can be marked static and also this will usually result in them being inlined since they are often only used from one point in the code. A couple of really trivial functions have been inlined by hand into the function which called them as it makes the code clearer to do that. We also gain from one fewer function call in the glock lock and unlock paths. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Allocate gfs2_rgrpd from slab memoryBob Peterson
This patch moves the gfs2_rgrpd structure to its own slab memory. This makes it easier to control and monitor, and yields less memory fragmentation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-12-07Merge master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (73 commits) [DLM] Clean up lowcomms [GFS2] Change gfs2_fsync() to use write_inode_now() [GFS2] Fix indent in recovery.c [GFS2] Don't flush everything on fdatasync [GFS2] Add a comment about reading the super block [GFS2] Mount problem with the GFS2 code [GFS2] Remove gfs2_check_acl() [DLM] fix format warnings in rcom.c and recoverd.c [GFS2] lock function parameter [DLM] don't accept replies to old recovery messages [DLM] fix size of STATUS_REPLY message [GFS2] fs/gfs2/log.c:log_bmap() fix printk format warning [DLM] fix add_requestqueue checking nodes list [GFS2] Fix recursive locking in gfs2_getattr [GFS2] Fix recursive locking in gfs2_permission [GFS2] Reduce number of arguments to meta_io.c:getbuf() [GFS2] Move gfs2_meta_syncfs() into log.c [GFS2] Fix journal flush problem [GFS2] mark_inode_dirty after write to stuffed file [GFS2] Fix glock ordering on inode creation ...
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-30[GFS2] gfs2 misc endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-05[GFS2] Make headers compile on their ownSteven Whitehouse
As per Jan Engelhardt's comments, this should make all the headers compile on their own by including and/or declaring structures early. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04[GFS2] Change all types to uX styleSteven Whitehouse
This makes all fixed size types have consistent names. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01[GFS2] Update copyright, tidy up incore.hSteven Whitehouse
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this updates the copyright message to say "version" in full rather than "v.2". Also incore.h has been updated to remove forward structure declarations which are not required. The gfs2_quota_lvb structure has now had endianess annotations added to it. Also quota.c has been updated so that we now store the lvb data locally in endian independant format to avoid needing a structure in host endianess too. As a result the endianess conversions are done as required at various points and thus the conversion routines in lvb.[ch] are no longer required. I've moved the one remaining constant in lvb.h thats used into lm.h and removed the unused lvb.[ch]. I have not changed the HIF_ constants. That is left to a later patch which I hope will unify the gh_flags and gh_iflags fields of the struct gfs2_holder. Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-05-18[GFS2] Update copyright date to 2006Steven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-21[GFS2] Move BUG() back into the header fileSteven Whitehouse
In order to make the file and line number reporting work correctly, this has been moved back into the header file. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-21[GFS2] sem -> mutex conversion in locking.cSteven Whitehouse
Convert a semaphore to a mutex in locking.c and also tidy up one or two loose ends. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-30[GFS] Fix bug in endian conversion for metadata headerSteven Whitehouse
In some cases 16 bit functions were being used rather than 32 bit functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-03-28[GFS2] Further updates to dir and logging codeSteven Whitehouse
This reduces the size of the directory code by about 3k and gets readdir() to use the functions which were introduced in the previous directory code update. Two memory allocations are merged into one. Eliminates zeroing of some buffers which were never used before they were initialised by other data. There is still scope for further improvement in the directory code. On the logging side, a hand created mutex has been replaced by a standard Linux mutex in the log allocation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-18[GFS2] Remove unused code from various filesSteven Whitehouse
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-16[GFS2] The core of GFS2David Teigland
This patch contains all the core files for GFS2. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>