summaryrefslogtreecommitdiff
path: root/fs/gfs2/inode.c
AgeCommit message (Collapse)Author
2016-05-20Merge tag 'gfs2-4.7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We've got nine patches this time: - Abhi Das has two patches that fix a GFS2 splice issue (and an adjustment). - Ben Marzinski has a patch which allows the proper unmount of a GFS2 file system after hitting a withdraw error. - I have a patch to fix a problem where GFS2 would dereference an error value, plus three cosmetic / refactoring patches. - Daniel DeFreez has a patch to fix two glock reference count problems, where GFS2 was not properly "uninitializing" its glock holder on error paths. - Denys Vlasenko has a patch to change a function to not be inlined, thus reducing the memory footprint of the GFS2 module" * tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Refactor gfs2_remove_from_journal GFS2: Remove allocation parms from gfs2_rbm_find gfs2: use inode_lock/unlock instead of accessing i_mutex directly GFS2: Add calls to gfs2_holder_uninit in two error handlers GFS2: Don't dereference inode in gfs2_inode_lookup until it's valid GFS2: fs/gfs2/glock.c: Deinline do_error, save 1856 bytes gfs2: Use gfs2 wrapper to sync inode before calling generic_file_splice_read() GFS2: Get rid of dead code in inode_go_demote_ok GFS2: ignore unlock failures after withdraw
2016-05-12gfs2: Switch to generic xattr handlersAl Viro
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-14GFS2: Don't dereference inode in gfs2_inode_lookup until it's validBob Peterson
Function gfs2_inode_lookup was dereferencing the inode, and after, it checks for the value being NULL. We need to check that first. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-04-11->getxattr(): pass dentry and inode as separate argumentsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-17Merge tag 'gfs2-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We only have six patches ready for this merge window: - Arnd Bergmann contributed a patch that fixes an uninitialized variable warning. - The second patch avoids a kernel panic due to referencing an iopen glock that may not be held, in an error path. - The third patch fixes a rounding error that caused xfs_tests direct IO write "fsx" tests to fail on GFS2. - The fourth patch tidies up the code path when glocks are being reused to recreate a dinode that was recently deleted. - The fifth reverts an ages-old patch that should no longer be needed, and which interfered with the transition of dinodes from unlinked to free. - And lastly, a patch to eliminate a function parameter that's not needed" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Eliminate parameter non_block on gfs2_inode_lookup GFS2: Don't filter out I_FREEING inodes anymore GFS2: Prevent delete work from occurring on glocks used for create GFS2: Fix direct IO write rounding error gfs2: avoid uninitialized variable warning GFS2: Check if iopen is held when deleting inode
2016-03-15GFS2: Eliminate parameter non_block on gfs2_inode_lookupBob Peterson
Now that we're not filtering out I_FREEING inodes from our lookups anymore, we can eliminate the non_block parameter from the lookup function. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-03-15GFS2: Don't filter out I_FREEING inodes anymoreBob Peterson
This patch basically reverts a very old patch from 2008, 7a9f53b3c1875bef22ad4588e818bc046ef183da, with the title "Alternate gfs2_iget to avoid looking up inodes being freed". The original patch was designed to avoid a deadlock caused by lock ordering with try_rgrp_unlink. The patch forced the function to not find inodes that were being removed by VFS. The problem is, that made it impossible for nodes to delete their own unlinked dinodes after a certain point in time, because the inode needed was not found by this filtering process. There is no longer a need for the patch, since function try_rgrp_unlink no longer locks the inode: All it does is queue the glock onto the delete work_queue, so there should be no more deadlock. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2016-03-15GFS2: Prevent delete work from occurring on glocks used for createBob Peterson
This patch tries to prevent delete work (queued via iopen callback) from executing if the glock is currently being used to create a new inode. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2016-01-22wrappers for ->i_mutex accessAl Viro
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-12Merge tag 'gfs2-merge-window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "Here is a list of patches we've accumulated for GFS2 for the current upstream merge window. Last window's set was short, but I warned that this one would be bigger, and so it is. We've got 19 patches: - A patch from Abhi Das to propagate the GFS2_DIF_SYSTEM bit so that newly added journals don't get flagged, deleted, and recreated by fsck.gfs2. - Two patches from Andreas Gruenbacher to improve GFS2 performance where extended attributes are involved. - A patch from Andy Price to fix a suspicious rcu dereference error. - Two patches from Ben Marzinski that rework how GFS2's NFS cookies are managed. This fixes readdir problems with nfs-over-gfs2. - A patch from Ben Marzinski that fixes a race in unmounting GFS2. - A set of four patches from me to move the resource group reservations inside the gfs2 inode to improve performance and fix a bug whereby get_write_access improperly prevented some operations like chown. - A patch from me to spinlock-protect the setting of system statfs file data. This was causing small discrepancies between df and du. - A patch from me to reintroduce a timeout while clearing glocks which was accidentally dropped some time ago. - A patch from me to wait for iopen glock dequeues in order to improve deleting of files that were unlinked from a different cluster node. - A patch from me to ensure metadata address spaces get truncated when an inode is evicted. - A patch from me to fix a bug in which a memory leak could occur in some error cases when inodes were trying to be created. - A patch to consistently use iopen glocks to transition from the unlinked state to the deleted state. - A patch to fix a glock reference count error when inode creation fails. - A patch from Junxiao Bi to fix an flock panic. - A patch from Markus Elfring that removes an unnecessary if" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix flock panic issue GFS2: Don't do glock put on when inode creation fails GFS2: Always use iopen glock for gl_deletes GFS2: Release iopen glock in gfs2_create_inode error cases GFS2: Truncate address space mapping when deleting an inode GFS2: Wait for iopen glock dequeues gfs2: clear journal live bit in gfs2_log_flush gfs2: change gfs2 readdir cookie gfs2: keep offset when splitting dir leaf blocks GFS2: Reintroduce a timeout in function gfs2_gl_hash_clear GFS2: Update master statfs buffer with sd_statfs_spin locked GFS2: Reduce size of incore inode GFS2: Make rgrp reservations part of the gfs2_inode structure GFS2: Extract quota data from reservations structure (revert 5407e24) gfs2: Extended attribute readahead optimization gfs2: Extended attribute readahead GFS2: Use rht_for_each_entry_rcu in glock_hash_walk GFS2: Delete an unnecessary check before the function call "iput" gfs2: Automatically set GFS2_DIF_SYSTEM flag on system files
2015-12-30switch ->get_link() to delayed_call, kill ->put_link()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-18GFS2: Don't do glock put on when inode creation failsBob Peterson
Currently the error path of function gfs2_inode_lookup calls function gfs2_glock_put corresponding to an earlier call to gfs2_glock_get for the inode glock. That's wrong because the error path also calls iget_failed() which eventually calls iput, which eventually calls gfs2_evict_inode, which does another gfs2_glock_put. This double-put can cause the glock reference count to get off. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-12-18GFS2: Release iopen glock in gfs2_create_inode error casesBob Peterson
Some error cases in gfs2_create_inode were not unlocking the iopen glock, getting the reference count off. This adds the proper unlock. The error logic in function gfs2_create_inode was also convoluted, so this patch simplifies it. It also takes care of a bug in which gfs2_qa_delete() was not called in an error case. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-12-18GFS2: Wait for iopen glock dequeuesBob Peterson
This patch changes every glock_dq for iopen glocks into a dq_wait. This makes sure that iopen glocks do not outlive the inode itself. In turn, that ensures that anyone trying to unlink the glock will be able to find the inode when it receives a remote iopen callback. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-12-14GFS2: Make rgrp reservations part of the gfs2_inode structureBob Peterson
Before this patch, multi-block reservation structures were allocated from a special slab. This patch folds the structure into the gfs2_inode structure. The disadvantage is that the gfs2_inode needs more memory, even when a file is opened read-only. The advantages are: (a) we don't need the special slab and the extra time it takes to allocate and deallocate from it. (b) we no longer need to worry that the structure exists for things like quota management. (c) This also allows us to remove the calls to get_write_access and put_write_access since we know the structure will exist. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-12-08replace ->follow_link() with new method that could stay in RCU modeAl Viro
new method: ->get_link(); replacement of ->follow_link(). The differences are: * inode and dentry are passed separately * might be called both in RCU and non-RCU mode; the former is indicated by passing it a NULL dentry. * when called that way it isn't allowed to block and should return ERR_PTR(-ECHILD) if it needs to be called in non-RCU mode. It's a flagday change - the old method is gone, all in-tree instances converted. Conversion isn't hard; said that, so far very few instances do not immediately bail out when called in RCU mode. That'll change in the next commits. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-24GFS2: Extract quota data from reservations structure (revert 5407e24)Bob Peterson
This patch basically reverts the majority of patch 5407e24. That patch eliminated the gfs2_qadata structure in favor of just using the reservations structure. The problem with doing that is that it increases the size of the reservations structure. That is not an issue until it comes time to fold the reservations structure into the inode in memory so we know it's always there. By separating out the quota structure again, we aren't punishing the non-quota users by making all the inodes bigger, requiring more slab space. This patch creates a new slab area to allocate the quota stuff so it's managed a little more sanely. Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-11-10gfs2: Automatically set GFS2_DIF_SYSTEM flag on system filesAbhi Das
When new files and directories are created inside a parent directory we automatically inherit the GFS2_DIF_SYSTEM flag (if set) and assign it to the new file/dirs. All new system files/dirs created in the metafs by, say gfs2_jadd, will have this flag set because they will have parent directories in the metafs whose GFS2_DIF_SYSTEM flag has already been set (most likely by a previous mkfs.gfs2) Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-06-27Merge tag 'gfs2-merge-window' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "Here are the patches we've accumulated for GFS2 for the current upstream merge window. We have a good mixture this time. Here are some of the features: - Fix a problem with RO mounts writing to the journal. - Further improvements to quotas on GFS2. - Added support for rename2 and RENAME_EXCHANGE on GFS2. - Increase performance by making glock lru_list less of a bottleneck. - Increase performance by avoiding unnecessary buffer_head releases. - Increase performance by using average glock round trip time from all CPUs. - Fixes for some compiler warnings and minor white space issues. - Other misc bug fixes" * tag 'gfs2-merge-window' of git://git.kernel.org:/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Don't brelse rgrp buffer_heads every allocation GFS2: Don't add all glocks to the lru gfs2: Don't support fallocate on jdata files gfs2: s64 cast for negative quota value gfs2: limit quota log messages gfs2: fix quota updates on block boundaries gfs2: fix shadow warning in gfs2_rbm_find() gfs2: kerneldoc warning fixes gfs2: convert simple_str to kstr GFS2: make sure S_NOSEC flag isn't overwritten GFS2: add support for rename2 and RENAME_EXCHANGE gfs2: handle NULL rgd in set_rgrp_preferences GFS2: inode.c: indent with TABs, not spaces GFS2: mark the journal idle to fix ro mounts GFS2: Average in only non-zero round-trip times for congestion stats GFS2: Use average srttb value in congestion calculations
2015-06-02gfs2: fix quota updates on block boundariesAbhi Das
For smaller block sizes (512B, 1K, 2K), some quotas straddle block boundaries such that the usage value is on one block and the rest of the quota is on the previous block. In such cases, the value does not get updated correctly. This patch fixes that by addressing the boundary conditions correctly. This patch also adds a (s64) cast that was missing in a call to gfs2_quota_change() in inode.c Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-05-10don't pass nameidata to ->follow_link()Al Viro
its only use is getting passed to nd_jump_link(), which can obtain it from current->nameidata Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10new ->follow_link() and ->put_link() calling conventionsAl Viro
a) instead of storing the symlink body (via nd_set_link()) and returning an opaque pointer later passed to ->put_link(), ->follow_link() _stores_ that opaque pointer (into void * passed by address by caller) and returns the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic symlinks) and pointer to symlink body for normal symlinks. Stored pointer is ignored in all cases except the last one. Storing NULL for opaque pointer (or not storing it at all) means no call of ->put_link(). b) the body used to be passed to ->put_link() implicitly (via nameidata). Now only the opaque pointer is. In the cases when we used the symlink body to free stuff, ->follow_link() now should store it as opaque pointer in addition to returning it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-05GFS2: add support for rename2 and RENAME_EXCHANGEBenjamin Marzinski
gfs2 now uses the rename2 directory iop, and supports the RENAME_EXCHANGE flag (as well as RENAME_NOREPLACE, which the vfs takes care of). Signed-off-by: Benjamin Marzinski <bmarzins redhat com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-05-01GFS2: inode.c: indent with TABs, not spacesAntonio Ospite
Follow the same style used for the other functions in the same file. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18gfs2: perform quota checks against allocation parametersAbhi Das
Use struct gfs2_alloc_parms as an argument to gfs2_quota_check() and gfs2_quota_lock_check() to check for quota violations while accounting for the new blocks requested by the current operation in ap->target. Previously, the number of new blocks requested during an operation were not accounted for during quota_check and would allow these operations to exceed quota. This was not very apparent since most operations allocated only 1 block at a time and quotas would get violated in the next operation. i.e. quota excess would only be by 1 block or so. With fallocate, (where we allocate a bunch of blocks at once) the quota excess is non-trivial and is addressed by this patch. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-01-26GFS2: Eliminate a nonsense gotoBob Peterson
This patch just removes a goto that did nothing. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20GFS2: gfs2_atomic_open(): simplify the use of finish_no_open()Al Viro
In ->atomic_open(inode, dentry, file, opened) calling finish_no_open(file, NULL) is equivalent to dget(dentry); return finish_no_open(file, dentry); No need to open-code that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20GFS2: gfs2_create_inode(): don't bother with d_splice_alias()Al Viro
dentry is always hashed and negative, inode - non-error, non-NULL and non-directory. In such conditions d_splice_alias() is equivalent to "d_instantiate(dentry, inode) and return NULL", which simplifies the downstream code and is consistent with the "have to create a new object" case. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-20GFS2: bugger off early if O_CREAT open finds a directoryAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-17GFS2: update freeze code to use freeze/thaw_super on all nodesBenjamin Marzinski
The current gfs2 freezing code is considerably more complicated than it should be because it doesn't use the vfs freezing code on any node except the one that begins the freeze. This is because it needs to acquire a cluster glock before calling the vfs code to prevent a deadlock, and without the new freeze_super and thaw_super hooks, that was impossible. To deal with the issue, gfs2 had to do some hacky locking tricks to make sure that a frozen node couldn't be holding on a lock it needed to do the unfreeze ioctl. This patch makes use of the new hooks to simply the gfs2 locking code. Now, all the nodes in the cluster freeze and thaw in exactly the same way. Every node in the cluster caches the freeze glock in the shared state. The new freeze_super hook allows the freezing node to grab this freeze glock in the exclusive state without first calling the vfs freeze_super function. All the nodes in the cluster see this lock change, and call the vfs freeze_super function. The vfs locking code guarantees that the nodes can't get stuck holding the glocks necessary to unfreeze the system. To unfreeze, the freezing node uses the new thaw_super hook to drop the freeze glock. Again, all the nodes notice this, reacquire the glock in shared mode and call the vfs thaw_super function. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03GFS2: directly return gfs2_dir_check()Fabian Frederick
No need to store gfs2_dir_check result and test it before returning. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The big thing in this pile is Eric's unmount-on-rmdir series; we finally have everything we need for that. The final piece of prereqs is delayed mntput() - now filesystem shutdown always happens on shallow stack. Other than that, we have several new primitives for iov_iter (Matt Wilcox, culled from his XIP-related series) pushing the conversion to ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c cleanups and fixes (including the external name refcounting, which gives consistent behaviour of d_move() wrt procfs symlinks for long and short names alike) and assorted cleanups and fixes all over the place. This is just the first pile; there's a lot of stuff from various people that ought to go in this window. Starting with unionmount/overlayfs mess... ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits) fs/file_table.c: Update alloc_file() comment vfs: Deduplicate code shared by xattr system calls operating on paths reiserfs: remove pointless forward declaration of struct nameidata don't need that forward declaration of struct nameidata in dcache.h anymore take dname_external() into fs/dcache.c let path_init() failures treated the same way as subsequent link_path_walk() fix misuses of f_count() in ppp and netlink ncpfs: use list_for_each_entry() for d_subdirs walk vfs: move getname() from callers to do_mount() gfs2_atomic_open(): skip lookups on hashed dentry [infiniband] remove pointless assignments gadgetfs: saner API for gadgetfs_create_file() f_fs: saner API for ffs_sb_create_file() jfs: don't hash direct inode [s390] remove pointless assignment of ->f_op in vmlogrdr ->open() ecryptfs: ->f_op is never NULL android: ->f_op is never NULL nouveau: __iomem misannotations missing annotation in fs/file.c fs: namespace: suppress 'may be used uninitialized' warnings ...
2014-10-09gfs2_atomic_open(): skip lookups on hashed dentryAl Viro
hashed dentry can be passed to ->atomic_open() only if a) it has just passed revalidation and b) it's negative Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-01GFS2: Make rename not save dirent locationBob Peterson
This patch fixes a regression in the patch "GFS2: Remember directory insert point", commit 2b47dad866d04f14c328f888ba5406057b8c7d33. The problem had to do with the rename function: The function found space for the new dirent, and remembered that location. But then the old dirent was removed, which often moved the eligible location for the renamed dirent. Putting the new dirent at the saved location caused file system corruption. This patch adds a new "save_loc" variable to struct gfs2_diradd. If 1, the dirent location is saved. If 0, the dirent location is not saved and the buffer_head is released as per previous behavior. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-19GFS2: fix bad inode i_goal values during block allocationAbhi Das
This patch checks if i_goal is either zero or if doesn't exist within any rgrp (i.e gfs2_blk2rgrpd() returns NULL). If so, it assigns the ip->i_no_addr block as the i_goal. There are two scenarios where a bad i_goal can result in a -EBADSLT error. 1. Attempting to allocate to an existing inode: Control reaches gfs2_inplace_reserve() and ip->i_goal is bad. We need to fix i_goal here. 2. A new inode is created in a directory whose i_goal is hosed: In this case, the parent dir's i_goal is copied onto the new inode. Since the new inode is not yet created, the ip->i_no_addr field is invalid and so, the fix in gfs2_inplace_reserve() as per 1) won't work in this scenario. We need to catch and fix it sooner in the parent dir itself (gfs2_create_inode()), before it is copied to the new inode. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-12GFS2: fix d_splice_alias() misusesAl Viro
Callers of d_splice_alias(dentry, inode) don't need iput(), neither on success nor on failure. Either the reference to inode is stored in a previously negative dentry, or it's dropped. In either case inode reference the caller used to hold is consumed. __gfs2_lookup() does iput() in case when d_splice_alias() has failed. Double iput() if we ever hit that. And gfs2_create_inode() ends up not only with double iput(), but with link count dropped to zero - on an inode it has just found in directory. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-11GFS2: Hash the negative dentry during inode lookupBenjamin Coddington
Fix a regression introduced by: 6d4ade986f9c8df31e68 GFS2: Add atomic_open support where an early return misses d_splice_alias() which had been adding the negative dentry. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-14GFS2: remove transaction glockBenjamin Marzinski
GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-31GFS2: Fix uninitialized VFS inode in gfs2_create_inodeAbhi Das
When gfs2_create_inode() fails due to quota violation, the VFS inode is not completely uninitialized. This can cause a list corruption error. This patch correctly uninitializes the VFS inode when a quota violation occurs in the gfs2_create_inode codepath. Resolves: rhbz#1059808 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: Remove extraneous function gfs2_security_initBob Peterson
This patch eliminates function gfs2_security_init in favor of just calling security_inode_init_security directly. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-12GFS2: check NULL return value in gfs2_ok_to_moveAbhi Das
gfs2_lookupi() can return NULL if the path to the root is broken by another rename/rmdir. In this case gfs2_ok_to_move() must check for this NULL pointer and return error. Resolves: rhbz#1060246 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-04GFS2: Allocate block for xattr at inode alloc time, if requiredSteven Whitehouse
This is another step towards improving the allocation of xattr blocks at inode allocation time. Here we take advantage of Christoph's recent work on ACLs to allocate a block for the xattrs early if we know that we will be adding ACLs to the inode later on. The advantage of that is that it is much more likely that we'll get a contiguous run of two blocks where the first is the inode and the second is the xattr block. We still have to fall back to the original system in case we don't get the requested two contiguous blocks, or in case the ACLs are too large to fit into the block. Future patches will move more of the ACL setting code further up the gfs2_inode_create() function. Also, I'd like to be able to do the same thing with the xattrs from LSMs in due course, too. That way we should be able to slowly reduce the number of independent transactions, at least in the most common cases. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "Assorted stuff; the biggest pile here is Christoph's ACL series. Plus assorted cleanups and fixes all over the place... There will be another pile later this week" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits) __dentry_path() fixes vfs: Remove second variable named error in __dentry_path vfs: Is mounted should be testing mnt_ns for NULL or error. Fix race when checking i_size on direct i/o read hfsplus: remove can_set_xattr nfsd: use get_acl and ->set_acl fs: remove generic_acl nfs: use generic posix ACL infrastructure for v3 Posix ACLs gfs2: use generic posix ACL infrastructure jfs: use generic posix ACL infrastructure xfs: use generic posix ACL infrastructure reiserfs: use generic posix ACL infrastructure ocfs2: use generic posix ACL infrastructure jffs2: use generic posix ACL infrastructure hfsplus: use generic posix ACL infrastructure f2fs: use generic posix ACL infrastructure ext2/3/4: use generic posix ACL infrastructure btrfs: use generic posix ACL infrastructure fs: make posix_acl_create more useful fs: make posix_acl_chmod more useful ...
2014-01-25gfs2: use generic posix ACL infrastructureChristoph Hellwig
This contains some major refactoring for the create path so that inodes are created with the right mode to start with instead of fixing it up later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-18GFS2: revert "GFS2: d_splice_alias() can't return error"J. Bruce Fields
0d0d110720d7960b77c03c9f2597faaff4b484ae asserts that "d_splice_alias() can't return error unless it was given an IS_ERR(inode)". That was true of the implementation of d_splice_alias, but this is really a problem with d_splice_alias: at a minimum it should be able to return -ELOOP in the case where inserting the given dentry would cause a directory loop. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-16GFS2: Don't use ENOBUFS when ENOMEM is the correct error codeSteven Whitehouse
Al Viro has tactfully pointed out that we are using the incorrect error code in some cases. This patch fixes that, and also removes the (unused) return value for glock dumping. > * gfs2_iget() - ENOBUFS instead of ENOMEM. ENOBUFS is > "No buffer space available (POSIX.1 (XSI STREAMS option))" and since > we don't support STREAMS it's probably fair game, but... what the hell? Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk>
2014-01-07GFS2: Increase i_writecount during gfs2_setattr_chownBob Peterson
This patch calls get_write_access in function gfs2_setattr_chown, which merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. It also ensures that a multi-block reservation exists when needed for quota change operations during the chown. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-06GFS2: Remember directory insert pointSteven Whitehouse
When we look to see if there is enough space to add a dir entry without allocation, we have then been repeating the same search later when we do the actual insertion. This patch caches the details of the location in the gfs2_diradd structure, so that we do not have to repeat the search. This will provide a performance improvement which will be greater as the size of the directory increases. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>