| Age | Commit message (Collapse) | Author |
|---|
|
This area of the code has always been a bit delicate due to the
subtleties of lock ordering. The problem is that for "normal"
alloc/dealloc, we always grab the inode locks first and the rgrp lock
later.
In order to ensure no races in looking up the unlinked, but still
allocated inodes, we need to hold the rgrp lock when we do the lookup,
which means that we can't take the inode glock.
The solution is to borrow the technique already used by NFS to solve
what is essentially the same problem (given an inode number, look up
the inode carefully, checking that it really is in the expected
state).
We cannot do that directly from the allocation code (lock ordering
again) so we give the job to the pre-existing delete workqueue and
carry on with the allocation as normal.
If we find there is no space, we do a journal flush (required anyway
if space from a deallocation is to be released) which should block
against the pending deallocations, so we should always get the space
back.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
With the update of the truncate code, ip->i_disksize and
inode->i_size are merely copies of each other. This means
we can remove ip->i_disksize and use inode->i_size exclusively
reducing the size of a GFS2 inode by 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
add I_CLEAR instead of replacing I_FREEING with it. I_CLEAR is
equivalent to I_FREEING for almost all code looking at either;
it's there to keep track of having called clear_inode() exactly
once per inode lifetime, at some point after having set I_FREEING.
I_CLEAR and I_FREEING never get set at the same time with the
current code, so we can switch to setting i_flags to I_FREEING | I_CLEAR
instead of I_CLEAR without loss of information. As the result of
such change, checks become simpler and the amount of code that needs
to know about I_CLEAR shrinks a lot.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This patch fixes a problem in an error path when looking
up dinodes. There are two sister-functions, gfs2_inode_lookup
and gfs2_process_unlinked_inode. Both functions acquire and
hold the i_iopen glock for the dinode being looked up. The last
thing they try to do is hold the i_gl glock for the dinode.
If that glock fails for some reason, the error path was
incorrectly calling gfs2_glock_put for the i_iopen glock twice.
This resulted in the glock being prematurely freed. The
"minimum hold time" usually kept the glock in memory, but the
lock interface to dlm (aka lock_dlm) freed its memory for the
glock. In some circumstances, it would cause dlm's dlm_astd daemon
to try to call the bast function for the freed lock_dlm memory,
which resulted in a NULL pointer dereference.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The previous patch I wrote for reclaiming unlinked dinodes
had some shortcomings and did not prevent all hangs.
This version is much cleaner and more logical, and has
passed very difficult testing. Sorry for the churn.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a couple gfs2 problems with the reclaiming of
unlinked dinodes. First, there were a couple of livelocks where
everything would come to a halt waiting for a glock that was
seemingly held by a process that no longer existed. In fact, the
process did exist, it just had the wrong pid number in the holder
information. Second, there was a lock ordering problem between
inode locking and glock locking. Third, glock/inode contention
could sometimes cause inodes to be improperly marked invalid by
iget_failed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Since the start of GFS2, an "extra" inode has been used to store
the metadata belonging to each inode. The only reason for using
this inode was to have an extra address space, the other fields
were unused. This means that the memory usage was rather inefficient.
The reason for keeping each inode's metadata in a separate address
space is that when glocks are requested on remote nodes, we need to
be able to efficiently locate the data and metadata which relating
to that glock (inode) in order to sync or sync and invalidate it
(depending on the remotely requested lock mode).
This patch adds a new type of glock, which has in addition to
its normal fields, has an address space. This applies to all
inode and rgrp glocks (but to no other glock types which remain
as before). As a result, we no longer need to have the second
inode.
This results in three major improvements:
1. A saving of approx 25% of memory used in caching inodes
2. A removal of the circular dependency between inodes and glocks
3. No confusion between "normal" and "metadata" inodes in super.c
Although the first of these is the more immediately apparent, the
second is just as important as it now enables a number of clean
ups at umount time. Those will be the subject of future patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
After I_SYNC was split from I_LOCK the leftover is always used together with
I_NEW and thus superflous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There are two spare field in the header common to all GFS2
metadata. One is just the right size to fit a journal id
in it, and this patch updates the journal code so that each
time a metadata block is modified, we tag it with the journal
id of the node which is performing the modification.
The reason for this is that it should make it much easier to
debug issues which arise if we can tell which node was the
last to modify a particular metadata block.
Since the field is updated before the block is written into
the journal, each journal should only contain metadata which
is tagged with its own journal id. The one exception to this
is the journal header block, which might have a different node's
id in it, if that journal was recovered by another node in the
cluster.
Thus each journal will contain a record of which nodes recovered
it, via the journal header.
The other field in the metadata header could potentially be
used to hold information about what kind of operation was
performed, but for the time being we just zero it on each
transaction so that if we use it for that in future, we'll
know that the information (where it exists) is reliable.
I did consider using the other field to hold the journal
sequence number, however since in GFS2's journaling we write
the modified data into the journal and not the original
data, this gives no information as to what action caused the
modification, so I think we can probably come up with a better
use for those 64 bits in the future.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
To prepare for support for caching of ACLs, this cleans up the GFS2
ACL support by pushing the xattr code back into xattr.c and changing
the acl_get function into one which only returns ACLs so that we
can drop the caching function into it shortly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The inum structure used throughout GFS2 has two fields. One
no_addr is the disk block number of the inode in question and
is used everywhere as the inode number. The other, no_formal_ino,
is used only as the generation number for NFS.
Historically the no_formal_ino field was set using a complicated
system of one global and one per-node file containing inode numbers
in order to ensure that each no_formal_ino was unique. Also this
code made no provision for what would happen when eventually the
(64 bit) numbers ran out. Now I know that is pretty unlikely to
happen given the large space of numbers, but it is possible
nevertheless.
The only guarantee required for no_formal_ino is that, for any
single inode, the same number doesn't get reused too quickly.
We already have a generation number which is kept in the inode
and initialised from a counter in the resource group (almost
no overhead, since we have to touch the resource group anyway
in order to allocate an inode in the first place). Aside from
ensuring that we never use the value 0 in the no_formal_ino
field, we can use that counter directly.
As a result of that change, we lose about 200 lines of code and
also gain about 10 creates/sec on the postmark benchmark (on
my test machine).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Use the more conventional name for the extended attribute
support code. Update all the places which care.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This has been on my list for some time. We need to change the way
in which we handle extended attributes to allow faster file creation
times (by reducing the number of transactions required) and the
extended attribute code is the main obstacle to this.
In addition to that, the VFS provides a way to demultiplex the xattr
calls which we ought to be using, rather than rolling our own. This
patch changes the GFS2 code to use that VFS feature and as a result
the code shrinks by a couple of hundred lines or so, and becomes
easier to read.
I'm planning on doing further clean up work in this area, but this
patch is a good start. The cleaned up code also uses the more usual
"xattr" shorthand, I plan to eliminate the use of "eattr" eventually
and in the mean time it serves as a flag as to which bits of the code
have been updated.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
A little while back, block allocation was given some improved
error handling which meant that -EIO was returned in the case
of there being a problem in the resource group data. In addition
a message is printed explaning what went wrong and how to fix it.
This extends that error handling so that it also covers inode
allocation too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Another function which is only called from one ops_inode.c so
we move it and make it static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Move gfs2_readlinki into ops_inode.c and make it static
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Move gfs2_rmdiri() into ops_inode.c and make it static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch renames the ops_*.c files which have no counterpart
without the ops_ prefix in order to shorten the name and make
it more readable. In addition, ops_address.h (which was very
small) is moved into inode.h and inode.h is cleaned up by
adding extern where required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Remove the weird pointer to file_operations mess and replace it with
straight-forward defining of the lockinginstance names to the _nolock
variants.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
o Reducing overhead by eliminating duplicated fields between structures
o Simplifcation of the code (reduces the code size by a fair bit)
o The locking interface is now the DLM interface itself as proposed
some time ago.
o Fewer lookups of glocks when processing replies from the DLM
o Fewer memory allocations/deallocations for each glock
o Scope to do further optimisations in the future (but this patch is
more than big enough for now!)
Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.
This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch removes the two daemons, gfs2_scand and gfs2_glockd
and replaces them with a shrinker which is called from the VM.
The net result is that GFS2 responds better when there is memory
pressure, since it shrinks the glock cache at the same rate
as the VFS shrinks the dcache and icache. There are no longer
any time based criteria for shrinking glocks, they are kept
until such time as the VM asks for more memory and then we
demote just as many glocks as required.
There are potential future changes to this code, including the
possibility of sorting the glocks which are to be written back
into inode number order, to get a better I/O ordering. It would
be very useful to have an elevator based workqueue implementation
for this, as that would automatically deal with the read I/O cases
at the same time.
This patch is my answer to Andrew Morton's remark, made during
the initial review of GFS2, asking why GFS2 needs so many kernel
threads, the answer being that it doesn't :-) This patch is a
net loss of about 200 lines of code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The final field in gfs2_dinode_host was the i_flags field. Thats
renamed to i_diskflags in order to avoid confusion with the existing
inode flags, and moved into the inode proper at a suitable location
to avoid creating a "hole".
At that point struct gfs2_dinode_host is no longer needed and as
promised (quite some time ago!) it can now be removed completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch moved the i_size field from the gfs2_dinode_host and
following the ext3 convention renames it i_disksize.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This moves the di_eattr field out of gfs2_inode_host and
into the inode proper.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This moves the directory entry count into the proper inode.
Potentially we could get this to share the space used by
something else in the future, but this is one more step
on the way to removing the gfs2_dinode_host structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This moves the generation number from the gfs2_dinode_host
into the gfs2_inode structure. Eventually the plan is to get
rid of the gfs2_dinode_host structure completely.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Move the contents of some headers which contained very
little into more sensible places, and remove the original
header files. This should make it easier to find things.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Until now, we've used the same scheme as GFS1 for atime. This has failed
since atime is a per vfsmnt flag, not a per fs flag and as such the
"noatime" flag was not getting passed down to the filesystems. This
patch removes all the "special casing" around atime updates and we
simply use the VFS's atime code.
The net result is that GFS2 will now support all the same atime related
mount options of any other filesystem on a per-vfsmnt basis. We do lose
the "lazy atime" updates, but we gain "relatime". We could add lazy
atime to the VFS at a later date, if there is a requirement for that
variant still - I suspect relatime will be enough.
Also we lose about 100 lines of code after this patch has been applied,
and I have a suspicion that it will speed things up a bit, even when
atime is "on". So it seems like a nice clean up as well.
From a user perspective, everything stays the same except the loss of
the per-fs atime quantum tweekable (ought to be per-vfsmnt at the very
least, and to be honest I don't think anybody ever used it) and that a
number of options which were ignored before now work correctly.
Please let me know if you've got any comments. I'm pushing this out
early so that you can all see what my plans are.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
In case of error, the function gfs2_inode_lookup returns an
ERR pointer, but never returns a NULL pointer. So a NULL test that
necessarily comes after an IS_ERR test should be deleted, and a NULL
test that may come after a call to this function should be
strengthened by an IS_ERR test.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = gfs2_inode_lookup(...)
... when != x = E
* if (x != NULL)
S1 else S2
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a locking issue in the rename code by ensuring that we hold
the per sb rename lock over both directory and "other" renames which involve
different parent directories.
At the same time, this moved the (only called from one place) function
gfs2_ok_to_move into the file that its called from, so we can mark it
static. This should make a code a bit easier to follow.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Peter Staubach <staubach@redhat.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The ability to mark files for direct i/o access when opened
normally is both unused and pointless, so this patch removes
support for that feature.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 calls permission() to verify permissions after locks on the files
have been taken.
For this it's sufficient to call gfs2_permission() instead. This
results in the following changes:
- IS_RDONLY() check is not performed
- IS_IMMUTABLE() check is not performed
- devcgroup_inode_permission() is not called
- security_inode_permission() is not called
IS_RDONLY() should be unnecessary anyway, as the per-mount read-only
flag should provide protection against read-only remounts during
operations. do_gfs2_set_flags() has been fixed to perform
mnt_want_write()/mnt_drop_write() to protect against remounting
read-only.
IS_IMMUTABLE has been added to gfs2_permission()
Repeating the security checks seems to be pointless, as they don't
normally change, and if they do, it's independent of the filesystem
state.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch fixes a GFS2 filesystem consistency error reported from
function do_strip. The problem was caused by a timing window
that allowed two vfs inodes to be created in memory that point
to the same file. The problem is fixed by making the vfs's
iget_test, iget_set mechanism check and set a new bit in the
in-core gfs2_inode structure while the vfs inode spin_lock is held.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There are several places where GFP_KERNEL allocations happen under a glock,
which will result in hangs if we're under memory pressure and go to re-enter the
fs in order to flush stuff out. This patch changes the culprits to GFS_NOFS to
keep this problem from happening. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
gfs2_alloc_get may fail so we have to check it to prevent
NULL pointer dereference.
Signed-off-by: Cyrill Gorcunov <gorcunov@gamil.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
a previous commit removed call to
init_special_inode from inode lookuping, this cause problems as:
# mknod /mnt/gfs2/dev/null c 1 3
# cat /mnt/gfs2/dev/null
cat: /mnt/gfs2/dev/null: Invalid argument
without special inode, GFS2 cannot support char device file,
block device file, fifo pipe, and socket file, lose many important
features as a common file system.
this one line patch re add special inode support.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
struct inode_operations gfs2_dev_iops is always the same as gfs2_file_iops,
since Jan 2006, when GFS2 merged into mainstream kernel.
So one of them could be removed.
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
We've previously been using a "try lock" in readpage on the basis that
it would prevent deadlocks due to the inverted lock ordering (our normal
lock ordering is glock first and then page lock). Unfortunately tests
have shown that this isn't enough. If the glock has a demote request
queued such that run_queue() in the glock code tries to do a demote when
its called under readpage then it will try and write out all the dirty
pages which requires locking them. This then deadlocks with the page
locked by readpage.
The solution is to always require two calls into readpage. The first
unlocks the page, gets the glock and returns AOP_TRUNCATED_PAGE, the
second does the actual readpage and unlocks the glock & page as
required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
The blocks counter is almost a duplicate of the i_blocks
field in the VFS inode. The only difference is that i_blocks
can be only 32bits long for 32bit arch without large single file
support. Since GFS2 doesn't handle the non-large single file
case (for 32 bit anyway) this adds a new config dependency on
64BIT || LSF. This has always been the case, however we've never
explicitly said so before.
Even if we do add support for the non-LSF case, we will still
not require this field to be duplicated since we will not be
able to access oversized files anyway.
So the net result of all this is that we shave 8 bytes from a gfs2_inode
and get our config deps correct.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
There were three fields being used to keep track of the location
of the most recently allocated block for each inode. These have
been merged into a single field in order to better keep the
data and metadata for an inode close on disk, and also to reduce
the space required for storage.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch forms a pair with the previous patch which shrunk
di_height. Like that patch di_depth is renamed i_depth and moved
into struct gfs2_inode directly. Also the field goes from 16 bits
to 8 bits since it is also limited to a max value which is rather
small (17 in this case). In addition we also now validate the field
against this maximum value when its read in.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
I noticed that the latest change to i_height got rid of the
value from the inode dump. This patch adds it back.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
This patch improves the calculation of the tree height in order to reduce
the number of operations which are carried out on each call to gfs2_block_map.
In the common case, we now make a single comparison, rather than calculating
the required tree height from scratch each time. Also in the case that the
tree does need some extra height, we start from the current height rather from
zero when we work out what the new height ought to be.
In addition the di_height field is moved into the inode proper and reduced
in size to a u8 since the value must be between 0 and GFS2_MAX_META_HEIGHT (10).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Use iget_failed() in GFS2 to kill a failed inode.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I spotted this bug while I was digging around. Looks like it could cause
a lockup in some rare error condition.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
It is possible to reduce the size of GFS2 inodes by taking the i_alloc
structure out of the gfs2_inode. This patch allocates the i_alloc
structure whenever its needed, and frees it afterward. This decreases
the amount of low memory we use at the expense of requiring a memory
allocation for each page or partial page that we write. A quick test
with postmark shows that the overhead is not measurable and I also note
that OCFS2 use the same approach.
In the future I'd like to solve the problem by shrinking down the size
of the members of the i_alloc structure, but for now, this reduces the
immediate problem of using too much low-memory on x86 and doesn't add
too much overhead.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
