summaryrefslogtreecommitdiff
path: root/fs/fuse
AgeCommit message (Collapse)Author
2015-07-01fuse: req use bitopsMiklos Szeredi
Finer grained locking will mean there's no single lock to protect modification of bitfileds in fuse_req. So move to using bitops. Can use the non-atomic variants for those which happen while the request definitely has only one reference. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: simplify request abortMiklos Szeredi
- don't end the request while req->locked is true - make unlock_request() return an error if the connection was aborted Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: call fuse_abort_conn() in dev releaseMiklos Szeredi
fuse_abort_conn() does all the work done by fuse_dev_release() and more. "More" consists of: end_io_requests(fc); wake_up_all(&fc->waitq); kill_fasync(&fc->fasync, SIGIO, POLL_IN); All of which should be no-op (WARN_ON's added). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: fold fuse_request_send_nowait() into single callerMiklos Szeredi
And the same with fuse_request_send_nowait_locked(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: check conn_error earlierMiklos Szeredi
fc->conn_error is set once in FUSE_INIT reply and never cleared. Check it in request allocation, there's no sense in doing all the preparation if sending will surely fail. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: account as waiting before queuing for backgroundMiklos Szeredi
Move accounting of fc->num_waiting to the point where the request actually starts waiting. This is earlier than the current queue_request() for background requests, since they might be waiting on the fc->bg_queue before being queued on fc->pending. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: reset waitingMiklos Szeredi
Reset req->waiting in fuse_put_request(). This is needed for correct accounting in fc->num_waiting for reserved requests. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-07-01fuse: fix background request if not connectedMiklos Szeredi
request_end() expects fc->num_background and fc->active_background to have been incremented, which is not the case in fuse_request_send_nowait() failure path. So instead just call the ->end() callback (which is actually set by all callers). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: initialize fc->release before calling itMiklos Szeredi
fc->release is called from fuse_conn_put() which was used in the error cleanup before fc->release was initialized. [Jeremiah Mahler <jmmahler@gmail.com>: assign fc->release after calling fuse_conn_init(fc) instead of before.] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Fixes: a325f9b92273 ("fuse: update fuse_conn_init() and separate out fuse_conn_kill()") Cc: <stable@vger.kernel.org> #v2.6.31+
2015-06-25Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
2015-06-23fs: Rename file_remove_suid() to file_remove_privs()Jan Kara
file_remove_suid() is a misnomer since it removes also file capabilities stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells something else than whether file_remove_suid() call is necessary which leads to bugs. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-02writeback: move backing_dev_info->bdi_stat[] into bdi_writebackTejun Heo
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->bdi_stat[] into wb. * enum bdi_stat_item is renamed to wb_stat_item and the prefix of all enums is changed from BDI_ to WB_. * BDI_STAT_BATCH() -> WB_STAT_BATCH() * [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...) * bdi_stat[_error]() -> wb_stat[_error]() * bdi_writeout_inc() -> wb_writeout_inc() * stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and frees stat. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[] introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-11new helper: free_page_put_link()Al Viro
similar to kfree_put_link() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11switch ->put_link() from dentry to inodeAl Viro
only one instance looks at that argument at all; that sole exception wants inode rather than dentry. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10don't pass nameidata to ->follow_link()Al Viro
its only use is getting passed to nd_jump_link(), which can obtain it from current->nameidata Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10new ->follow_link() and ->put_link() calling conventionsAl Viro
a) instead of storing the symlink body (via nd_set_link()) and returning an opaque pointer later passed to ->put_link(), ->follow_link() _stores_ that opaque pointer (into void * passed by address by caller) and returns the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic symlinks) and pointer to symlink body for normal symlinks. Stored pointer is ignored in all cases except the last one. Storing NULL for opaque pointer (or not storing it at all) means no call of ->put_link(). b) the body used to be passed to ->put_link() implicitly (via nameidata). Now only the opaque pointer is. In the cases when we used the symlink body to free stuff, ->follow_link() now should store it as opaque pointer in addition to returning it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15VFS: normal filesystems (and lustre): d_inode() annotationsDavid Howells
that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11mirror O_APPEND and O_DIRECT into iocb->ki_flagsAl Viro
... avoiding write_iter/fcntl races. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11switch generic_write_checks() to iocb and iterAl Viro
... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-11fuse: ->direct_IO() doesn't need generic_write_checks()Al Viro
already done by caller. We used to call __fuse_direct_write(), which called generic_write_checks(); now the former got expanded, bringing the latter to the surface. It used to be called all along and calling it from there had been wrong all along... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11generic_write_checks(): drop isblk argumentAl Viro
all remaining callers are passing 0; some just obscure that fact. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: remove rw from a_ops->direct_IO()Omar Sandoval
Now that no one is using rw, remove it completely. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11direct_IO: use iov_iter_rw() instead of rw everywhereOmar Sandoval
The rw parameter to direct_IO is redundant with iov_iter->type, and treated slightly differently just about everywhere it's used: some users do rw & WRITE, and others do rw == WRITE where they should be doing a bitwise check. Simplify this with the new iov_iter_rw() helper, which always returns either READ or WRITE. Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11fuse: use iov_iter_get_pages() for non-splice pathAl Viro
store reference to iter instead of that to iovec Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11fuse: switch to ->read_iter/->write_iterAl Viro
we just change the calling conventions here; more work to follow. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11make new_sync_{read,write}() staticAl Viro
All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11expand __fuse_direct_write() in both callersAl Viro
it's actually shorter that way *and* later we'll want iocb in scope of generic_write_check() caller. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11fuse: switch fuse_direct_io_file_operations to ->{read,write}_iter()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11cuse: switch to iov_iterAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11Merge branch 'iocb' into for-nextAl Viro
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-19fuse: explicitly set /dev/fuse file's private_dataTom Van Braeckel
The misc subsystem (which is used for /dev/fuse) initializes private_data to point to the misc device when a driver has registered a custom open file operation, and initializes it to NULL when a custom open file operation has *not* been provided. This subtle quirk is confusing, to the point where kernel code registers *empty* file open operations to have private_data point to the misc device structure. And it leads to bugs, where the addition or removal of a custom open file operation surprisingly changes the initial contents of a file's private_data structure. So to simplify things in the misc subsystem, a patch [1] has been proposed to *always* set the private_data to point to the misc device, instead of only doing this when a custom open file operation has been registered. But before this patch can be applied we need to modify drivers that make the assumption that a misc device file's private_data is initialized to NULL because they didn't register a custom open file operation, so they don't rely on this assumption anymore. FUSE uses private_data to store the fuse_conn and errors out if this is not initialized to NULL at mount time. Hence, we now set a file's private_data to NULL explicitly, to be independent of whatever value the misc subsystem initializes it to by default. [1] https://lkml.org/lkml/2014/12/4/939 Reported-by: Giedrius Statkevicius <giedriuswork@gmail.com> Reported-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Tom Van Braeckel <tomvanbraeckel@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-03-13fs: split generic and aio kiocbChristoph Hellwig
Most callers in the kernel want to perform synchronous file I/O, but still have to bloat the stack with a full struct kiocb. Split out the parts needed in filesystem code from those in the aio code, and only allocate those needed to pass down argument on the stack. The aio code embedds the generic iocb in the one it allocates and can easily get back to it by using container_of. Also add a ->ki_complete method to struct kiocb, this is used to call into the aio code and thus removes the dependency on aio for filesystems impementing asynchronous operations. It will also allow other callers to substitute their own completion callback. We also add a new ->ki_flags field to work around the nasty layering violation recently introduced in commit 5e33f6 ("usb: gadget: ffs: add eventfd notification about ffs events"). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-13fuse: handle synchronous iocbs internallyChristoph Hellwig
Based on a patch from Maxim Patlasov <MPatlasov@parallels.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-26fuse: set stolen page uptodateMiklos Szeredi
Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2015-02-26fuse: notify: don't move pagesMiklos Szeredi
fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2015-02-22VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)David Howells
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-12Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull backing device changes from Jens Axboe: "This contains a cleanup of how the backing device is handled, in preparation for a rework of the life time rules. In this part, the most important change is to split the unrelated nommu mmap flags from it, but also removing a backing_dev_info pointer from the address_space (and inode), and a cleanup of other various minor bits. Christoph did all the work here, I just fixed an oops with pages that have a swap backing. Arnd fixed a missing export, and Oleg killed the lustre backing_dev_info from staging. Last patch was from Al, unexporting parts that are now no longer needed outside" * 'for-3.20/bdi' of git://git.kernel.dk/linux-block: Make super_blocks and sb_lock static mtd: export new mtd_mmap_capabilities fs: make inode_to_bdi() handle NULL inode staging/lustre/llite: get rid of backing_dev_info fs: remove default_backing_dev_info fs: don't reassign dirty inodes to default_backing_dev_info nfs: don't call bdi_unregister ceph: remove call to bdi_unregister fs: remove mapping->backing_dev_info fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info nilfs2: set up s_bdi like the generic mount_bdev code block_dev: get bdev inode bdi directly from the block device block_dev: only write bdev inode on close fs: introduce f_op->mmap_capabilities for nommu mmap support fs: kill BDI_CAP_SWAP_BACKED fs: deduplicate noop_backing_dev_info
2015-02-10mm: drop vm_ops->remap_pages and generic_file_remap_pages() stubKirill A. Shutemov
Nobody uses it anymore. [akpm@linux-foundation.org: fix filemap_xip.c] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-20fs: remove mapping->backing_dev_infoChristoph Hellwig
Now that we never use the backing_dev_info pointer in struct address_space we can simply remove it and save 4 to 8 bytes in every inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20fs: export inode_to_bdi and use it in favor of mapping->backing_dev_infoChristoph Hellwig
Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-06fuse: add memory barrier to INITMiklos Szeredi
Theoretically we need to order setting of various fields in fc with fc->initialized. No known bug reports related to this yet. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-01-06fuse: fix LOOKUP vs INIT compat handlingMiklos Szeredi
Analysis from Marc: "Commit 7078187a795f ("fuse: introduce fuse_simple_request() helper") from the above pull request triggers some EIO errors for me in some tests that rely on fuse Looking at the code changes and a bit of debugging info I think there's a general problem here that fuse_get_req checks and possibly waits for fc->initialized, and this was always called first. But this commit changes the ordering and in many places fc->minor is now possibly used before fuse_get_req, and we can't be sure that fc has been initialized. In my case fuse_lookup_init sets req->out.args[0].size to the wrong size because fc->minor at that point is still 0, leading to the EIO error." Fix by moving the compat adjustments into fuse_simple_request() to after fuse_get_req(). This is also more readable than the original, since now compatibility is handled in a single function instead of cluttering each operation. Reported-by: Marc Dionne <marc.c.dionne@gmail.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Fixes: 7078187a795f ("fuse: introduce fuse_simple_request() helper")
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "The first part makes sure we don't hold up umount with pending async requests. In addition to being a cleanup, this is a small behavioral change (for the better) and unlikely to break anything. The second part prepares for a cleanup of the fuse device I/O code by adding a helper for simple request submission, with some savings in line numbers already realized" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use file_inode() in fuse_file_fallocate() fuse: introduce fuse_simple_request() helper fuse: reduce max out args fuse: hold inode instead of path after release fuse: flush requests on umount fuse: don't wake up reserved req in fuse_conn_kill()
2014-12-12fuse: use file_inode() in fuse_file_fallocate()Miklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: introduce fuse_simple_request() helperMiklos Szeredi
The following pattern is repeated many times: req = fuse_get_req_nopages(fc); /* Initialize req->(in|out).args */ fuse_request_send(fc, req); err = req->out.h.error; fuse_put_request(req); Create a new replacement helper: /* Initialize args */ err = fuse_simple_request(fc, &args); In addition to reducing the code size, this will ease moving from the complex arg-based to a simpler page-based I/O on the fuse device. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: reduce max out argsMiklos Szeredi
The third out-arg is never actually used. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: hold inode instead of path after releaseMiklos Szeredi
path_put() in release could trigger a DESTROY request in fuseblk. The possible deadlock was worked around by doing the path_put() with schedule_work(). This complexity isn't needed if we just hold the inode instead of the path. Since we now flush all requests before destroying the super block we can be sure that all held inodes will be dropped. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: flush requests on umountMiklos Szeredi
Use fuse_abort_conn() instead of fuse_conn_kill() in fuse_put_super(). This flushes and aborts requests still on any queues. But since we've already reset fc->connected, those requests would not be useful anyway and would be flushed when the fuse device is closed. Next patches will rely on requests being flushed before the superblock is destroyed. Use fuse_abort_conn() in cuse_process_init_reply() too, since it makes no difference there, and we can get rid of fuse_conn_kill(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: don't wake up reserved req in fuse_conn_kill()Miklos Szeredi
Waking up reserved_req_waitq from fuse_conn_kill() doesn't make sense since we aren't chaging ff->reserved_req here, which is what this waitqueue signals. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>