| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fixes for virtiofs submounts
- Misc fixes and cleanups
* tag 'fuse-update-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: Fix spelling mistakes
fuse: use DIV_ROUND_UP helper macro for calculations
fuse: fix illegal access to inode with reused nodeid
fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)
fuse: Make fuse_fill_super_submount() static
fuse: Switch to fc_mount() for submounts
fuse: Call vfs_get_tree() for submounts
fuse: add dedicated filesystem context ops for submounts
virtiofs: propagate sync() to file server
fuse: reject internal errno
fuse: check connected before queueing on fpq->io
fuse: ignore PG_workingset after stealing
fuse: Fix infinite loop in sget_fc()
fuse: Fix crash if superblock of submount gets killed early
fuse: Fix crash in fuse_dentry_automount() error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter cleanups and fixes.
There are followups, but this is what had sat in -next this cycle. IMO
the macro forest in there became much thinner and easier to follow..."
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller
clean up copy_mc_pipe_to_iter()
pipe_zero(): we don't need no stinkin' kmap_atomic()...
iov_iter: clean csum_and_copy_...() primitives up a bit
copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases
copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases
iterate_xarray(): only of the first iteration we might get offset != 0
pull handling of ->iov_offset into iterate_{iovec,bvec,xarray}
iov_iter: make iterator callbacks use base and len instead of iovec
iov_iter: make the amount already copied available to iterator callbacks
iov_iter: get rid of separate bvec and xarray callbacks
iov_iter: teach iterate_{bvec,xarray}() about possible short copies
iterate_bvec(): expand bvec.h macro forest, massage a bit
iov_iter: unify iterate_iovec and iterate_kvec
iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec
iterate_and_advance(): get rid of magic in case when n is 0
csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter()
iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
[xarray] iov_iter_npages(): just use DIV_ROUND_UP()
iov_iter_npages(): don't bother with iterate_all_kinds()
...
|
|
These functions implement the address_space ->set_page_dirty operation and
should live in pagemap.h, not mm.h so that the rest of the kernel doesn't
get funny ideas about calling them directly.
Link: https://lkml.kernel.org/r/20210615162342.1669332-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix some spelling mistakes in comments:
refernce ==> reference
happnes ==> happens
threhold ==> threshold
splitted ==> split
mached ==> matched
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Replace open coded divisor calculations with the DIV_ROUND_UP kernel macro
for better readability.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.
If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.
This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.
With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.
Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The current fuse module filters out fallocate(FALLOC_FL_ZERO_RANGE)
returning -EOPNOTSUPP. libnbd's nbdfuse would like to translate
FALLOC_FL_ZERO_RANGE requests into the NBD command
NBD_CMD_WRITE_ZEROES which allows NBD servers that support it to do
zeroing efficiently.
This commit treats this flag exactly like FALLOC_FL_PUNCH_HOLE.
A way to test this, requiring fuse >= 3, nbdkit >= 1.8 and the latest
nbdfuse from https://gitlab.com/nbdkit/libnbd/-/tree/master/fuse is to
create a file containing some data and "mirror" it to a fuse file:
$ dd if=/dev/urandom of=disk.img bs=1M count=1
$ nbdkit file disk.img
$ touch mirror.img
$ nbdfuse mirror.img nbd://localhost &
(mirror.img -> nbdfuse -> NBD over loopback -> nbdkit -> disk.img)
You can then run commands such as:
$ fallocate -z -o 1024 -l 1024 mirror.img
and check that the content of the original file ("disk.img") stays
synchronized. To show NBD commands, export LIBNBD_DEBUG=1 before
running nbdfuse. To clean up:
$ fusermount3 -u mirror.img
$ killall nbdkit
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This function used to be called from fuse_dentry_automount(). This code
was moved to fuse_get_tree_submount() in the same file since then. It
is unlikely there will ever be another user. No need to be extern in
this case.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fc_mount() already handles the vfs_get_tree(), sb->s_umount
unlocking and vfs_create_mount() sequence. Using it greatly
simplifies fuse_dentry_automount().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We recently fixed an infinite loop by setting the SB_BORN flag on
submounts along with the write barrier needed by super_cache_count().
This is the job of vfs_get_tree() and FUSE shouldn't have to care
about the barrier at all.
Split out some code from fuse_dentry_automount() to the dedicated
fuse_get_tree_submount() handler for submounts and call vfs_get_tree().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The creation of a submount is open-coded in fuse_dentry_automount().
This brings a lot of complexity and we recently had to fix bugs
because we weren't setting SB_BORN or because we were unlocking
sb->s_umount before sb was fully configured. Most of these could
have been avoided by using the mount API instead of open-coding.
Basically, this means coming up with a proper ->get_tree()
implementation for submounts and call vfs_get_tree(), or better
fc_mount().
The creation of the superblock for submounts is quite different from
the root mount. Especially, it doesn't require to allocate a FUSE
filesystem context, nor to parse parameters.
Introduce a dedicated context ops for submounts to make this clear.
This is just a placeholder for now, fuse_get_tree_submount() will
be populated in a subsequent patch.
Only visible change is that we stop allocating/freeing a useless FUSE
filesystem context with submounts.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Don't allow userspace to report errors that could be kernel-internal.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: 334f485df85a ("[PATCH] FUSE - device functions")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:
Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io
After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.
Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.
Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix the "fuse: trying to steal weird page" warning.
Description from Johannes Weiner:
"Think of it as similar to PG_active. It's just another usage/heat
indicator of file and anon pages on the reclaim LRU that, unlike
PG_active, persists across deactivation and even reclaim (we store it in
the page cache / swapper cache tree until the page refaults).
So if fuse accepts pages that can legally have PG_active set,
PG_workingset is fine too."
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Fixes: 1899ad18c607 ("mm: workingset: tell cache transitions from workingset thrashing")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
variant
Replacement is called copy_page_from_iter_atomic(); unlike the old primitive the
callers do *not* need to do iov_iter_advance() after it. In case when they end
up consuming less than they'd been given they need to do iov_iter_revert() on
everything they had not consumed. That, however, needs to be done only on slow
paths.
All in-tree callers converted. And that kills the last user of iterate_all_kinds()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We don't set the SB_BORN flag on submounts. This is wrong as these
superblocks are then considered as partially constructed or dying
in the rest of the code and can break some assumptions.
One such case is when you have a virtiofs filesystem with submounts
and you try to mount it again : virtio_fs_get_tree() tries to obtain
a superblock with sget_fc(). The logic in sget_fc() is to loop until
it has either found an existing matching superblock with SB_BORN set
or to create a brand new one. It is assumed that a superblock without
SB_BORN is transient and the loop is restarted. Forgetting to set
SB_BORN on submounts hence causes sget_fc() to retry forever.
Setting SB_BORN requires special care, i.e. a write barrier for
super_cache_count() which can check SB_BORN without taking any lock.
We should call vfs_get_tree() to deal with that but this requires
to have a proper ->get_tree() implementation for submounts, which
is a bigger piece of work. Go for a simple bug fix in the meatime.
Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
As soon as fuse_dentry_automount() does up_write(&sb->s_umount), the
superblock can theoretically be killed. If this happens before the
submount was added to the &fc->mounts list, fuse_mount_remove() later
crashes in list_del_init() because it assumes the submount to be
already there.
Add the submount before dropping sb->s_umount to fix the inconsistency.
It is okay to nest fc->killsb under sb->s_umount, we already do this
on the ->kill_sb() path.
Signed-off-by: Greg Kurz <groug@kaod.org>
Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If fuse_fill_super_submount() returns an error, the error path
triggers a crash:
[ 26.206673] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[ 26.226362] RIP: 0010:__list_del_entry_valid+0x25/0x90
[...]
[ 26.247938] Call Trace:
[ 26.248300] fuse_mount_remove+0x2c/0x70 [fuse]
[ 26.248892] virtio_kill_sb+0x22/0x160 [virtiofs]
[ 26.249487] deactivate_locked_super+0x36/0xa0
[ 26.250077] fuse_dentry_automount+0x178/0x1a0 [fuse]
The crash happens because fuse_mount_remove() assumes that the FUSE
mount was already added to list under the FUSE connection, but this
only done after fuse_fill_super_submount() has returned success.
This means that until fuse_fill_super_submount() has returned success,
the FUSE mount isn't actually owned by the superblock. We should thus
reclaim ownership by clearing sb->s_fs_info, which will skip the call
to fuse_mount_remove(), and perform rollback, like virtio_fs_get_tree()
already does for the root sb.
Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
another rudiment of fault-in originally having been limited to the
first segment, same as in generic_perform_write() and friends.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff all over the place"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
useful constants: struct qstr for ".."
hostfs_open(): don't open-code file_dentry()
whack-a-mole: kill strlen_user() (again)
autofs: should_expire() argument is guaranteed to be positive
apparmor:match_mn() - constify devpath argument
buffer: a small optimization in grow_buffers
get rid of autofs_getpath()
constify dentry argument of dentry_path()/dentry_path_raw()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix a page locking bug in write (introduced in 2.6.26)
- Allow sgid bit to be killed in setacl()
- Miscellaneous fixes and cleanups
* tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
cuse: simplify refcount
cuse: prevent clone
virtiofs: fix userns
virtiofs: remove useless function
virtiofs: split requests that exceed virtqueue size
virtiofs: fix memory leak in virtio_fs_probe()
fuse: invalidate attrs when page writeback completes
fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGID
fuse: extend FUSE_SETXATTR request
fuse: fix matching of FUSE_DEV_IOC_CLONE command
fuse: fix a typo
fuse: don't zero pages twice
fuse: fix typo for fuse_conn.max_pages comment
fuse: fix write deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fileattr conversion updates from Miklos Szeredi via Al Viro:
"This splits the handling of FS_IOC_[GS]ETFLAGS from ->ioctl() into a
separate method.
The interface is reasonably uniform across the filesystems that
support it and gives nice boilerplate removal"
* 'miklos.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
ovl: remove unneeded ioctls
fuse: convert to fileattr
fuse: add internal open/release helpers
fuse: unsigned open flags
fuse: move ioctl to separate source file
vfs: remove unused ioctl helpers
ubifs: convert to fileattr
reiserfs: convert to fileattr
ocfs2: convert to fileattr
nilfs2: convert to fileattr
jfs: convert to fileattr
hfsplus: convert to fileattr
efivars: convert to fileattr
xfs: convert to fileattr
orangefs: convert to fileattr
gfs2: convert to fileattr
f2fs: convert to fileattr
ext4: convert to fileattr
ext2: convert to fileattr
btrfs: convert to fileattr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Put extra reference early in cuse_channel_open().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
get_user_ns() is done twice (once in virtio_fs_get_tree() and once in
fuse_conn_init()), resulting in a reference leak.
Also looks better to use fsc->user_ns (which *should* be the
current_user_ns() at this point).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix the following clang warning:
fs/fuse/virtio_fs.c:130:35: warning: unused function 'vq_to_fpq'
[-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
If an incoming FUSE request can't fit on the virtqueue, the request is
placed onto a workqueue so a worker can try to resubmit it later where
there will (hopefully) be space for it next time.
This is fine for requests that aren't larger than a virtqueue's maximum
capacity. However, if a request's size exceeds the maximum capacity of the
virtqueue (even if the virtqueue is empty), it will be doomed to a life of
being placed on the workqueue, removed, discovered it won't fit, and placed
on the workqueue yet again.
Furthermore, from section 2.6.5.3.1 (Driver Requirements: Indirect
Descriptors) of the virtio spec:
"A driver MUST NOT create a descriptor chain longer than the Queue
Size of the device."
To fix this, limit the number of pages FUSE will use for an overall
request. This way, each request can realistically fit on the virtqueue
when it is decomposed into a scattergather list and avoid violating section
2.6.5.3.1 of the virtio spec.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When accidentally passing twice the same tag to qemu, kmemleak ended up
reporting a memory leak in virtiofs. Also, looking at the log I saw the
following error (that's when I realised the duplicated tag):
virtiofs: probe of virtio5 failed with error -17
Here's the kmemleak log for reference:
unreferenced object 0xffff888103d47800 (size 1024):
comm "systemd-udevd", pid 118, jiffies 4294893780 (age 18.340s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 80 90 02 a0 ff ff ff ff ................
backtrace:
[<000000000ebb87c1>] virtio_fs_probe+0x171/0x7ae [virtiofs]
[<00000000f8aca419>] virtio_dev_probe+0x15f/0x210
[<000000004d6baf3c>] really_probe+0xea/0x430
[<00000000a6ceeac8>] device_driver_attach+0xa8/0xb0
[<00000000196f47a7>] __driver_attach+0x98/0x140
[<000000000b20601d>] bus_for_each_dev+0x7b/0xc0
[<00000000399c7b7f>] bus_add_driver+0x11b/0x1f0
[<0000000032b09ba7>] driver_register+0x8f/0xe0
[<00000000cdd55998>] 0xffffffffa002c013
[<000000000ea196a2>] do_one_initcall+0x64/0x2e0
[<0000000008f727ce>] do_init_module+0x5c/0x260
[<000000003cdedab6>] __do_sys_finit_module+0xb5/0x120
[<00000000ad2f48c6>] do_syscall_64+0x33/0x40
[<00000000809526b5>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In fuse when a direct/write-through write happens we invalidate attrs
because that might have updated mtime/ctime on server and cached
mtime/ctime will be stale.
What about page writeback path. Looks like we don't invalidate attrs
there. To be consistent, invalidate attrs in writeback path as well. Only
exception is when writeback_cache is enabled. In that case we strust local
mtime/ctime and there is no need to invalidate attrs.
Recently users started experiencing failure of xfstests generic/080,
geneirc/215 and generic/614 on virtiofs. This happened only newer "stat"
utility and not older one. This patch fixes the issue.
So what's the root cause of the issue. Here is detailed explanation.
generic/080 test does mmap write to a file, closes the file and then checks
if mtime has been updated or not. When file is closed, it leads to
flushing of dirty pages (and that should update mtime/ctime on server).
But we did not explicitly invalidate attrs after writeback finished. Still
generic/080 passed so far and reason being that we invalidated atime in
fuse_readpages_end(). This is called in fuse_readahead() path and always
seems to trigger before mmaped write.
So after mmaped write when lstat() is called, it sees that atleast one of
the fields being asked for is invalid (atime) and that results in
generating GETATTR to server and mtime/ctime also get updated and test
passes.
But newer /usr/bin/stat seems to have moved to using statx() syscall now
(instead of using lstat()). And statx() allows it to query only ctime or
mtime (and not rest of the basic stat fields). That means when querying
for mtime, fuse_update_get_attr() sees that mtime is not invalid (only
atime is invalid). So it does not generate a new GETATTR and fill stat
with cached mtime/ctime. And that means updated mtime is not seen by
xfstest and tests start failing.
Invalidating attrs after writeback completion should solve this problem in
a generic manner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When posix access ACL is set, it can have an effect on file mode and it can
also need to clear SGID if.
- None of caller's group/supplementary groups match file owner group.
AND
- Caller is not priviliged (No CAP_FSETID).
As of now fuser server is responsible for changing the file mode as
well. But it does not know whether to clear SGID or not.
So add a flag FUSE_SETXATTR_ACL_KILL_SGID and send this info with SETXATTR
to let file server know that sgid needs to be cleared as well.
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fuse client needs to send additional information to file server when it
calls SETXATTR(system.posix_acl_access), so add extra flags field to the
structure.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
With commit f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse
device") the matching constraints for the FUSE_DEV_IOC_CLONE ioctl command
are relaxed, limited to the testing of command type and number. As Arnd
noticed, this is wrong as it wouldn't ensure the correctness of the data
size or direction for the received FUSE device ioctl.
Fix by bringing back the comparison of the ioctl received by the FUSE
device to the originally generated FUSE_DEV_IOC_CLONE.
Fixes: f8425c939663 ("fuse: 32-bit user space ioctl compat for fuse device")
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
s/reponsible/responsible/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
All callers of fuse_short_read already set the .page_zeroing flag, so no
need to do the tail zeroing again.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
'Maxmum' -> 'Maximum'
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
There are two modes for write(2) and friends in fuse:
a) write through (update page cache, send sync WRITE request to userspace)
b) buffered write (update page cache, async writeout later)
The write through method kept all the page cache pages locked that were
used for the request. Keeping more than one page locked is deadlock prone
and Qian Cai demonstrated this with trinity fuzzing.
The reason for keeping the pages locked is that concurrent mapped reads
shouldn't try to pull possibly stale data into the page cache.
For full page writes, the easy way to fix this is to make the cached page
be the authoritative source by marking the page PG_uptodate immediately.
After this the page can be safely unlocked, since mapped/cached reads will
take the written data from the cache.
Concurrent mapped writes will now cause data in the original WRITE request
to be updated; this however doesn't cause any data inconsistency and this
scenario should be exceedingly rare anyway.
If the WRITE request returns with an error in the above case, currently the
page is not marked uptodate; this means that a concurrent read will always
read consistent data. After this patch the page is uptodate between
writing to the cache and receiving the error: there's window where a cached
read will read the wrong data. While theoretically this could be a
regression, it is unlikely to be one in practice, since this is normal for
buffered writes.
In case of a partial page write to an already uptodate page the locking is
also unnecessary, with the above caveats.
Partial write of a not uptodate page still needs to be handled. One way
would be to read the complete page before doing the write. This is not
possible, since it might break filesystems that don't expect any READ
requests when the file was opened O_WRONLY.
The other solution is to serialize the synchronous write with reads from
the partial pages. The easiest way to do this is to keep the partial pages
locked. The problem is that a write() may involve two such pages (one head
and one tail). This patch fixes it by only locking the partial tail page.
If there's a partial head page as well, then split that off as a separate
WRITE request.
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/linux-fsdevel/4794a3fa3742a5e84fb0f934944204b55730829b.camel@lca.pw/
Fixes: ea9b9907b82a ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org> # v2.6.26
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Since fuse just passes ioctl args through to/from server, converting to the
fileattr API is more involved, than most other filesystems.
Both .fileattr_set() and .fileattr_get() need to obtain an open file to
operate on. The simplest way is with the following sequence:
FUSE_OPEN
FUSE_IOCTL
FUSE_RELEASE
If this turns out to be a performance problem, it could be optimized for
the case when there's already a file (any file) open for the inode.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Clean out 'struct file' from internal helpers.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Release helpers used signed int.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Next patch will expand ioctl code and fuse/file.c is large enough as it is.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
With a 64-bit kernel build the FUSE device cannot handle ioctl requests
coming from 32-bit user space. This is due to the ioctl command
translation that generates different command identifiers that thus cannot
be used for direct comparisons without proper manipulation.
Explicitly extract type and number from the ioctl command to enable 32-bit
user space compatibility on 64-bit kernel builds.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type. We have enough of
those checks open-coded to make a helper worthwhile.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Right now "mount -t virtiofs -o dax myfs /mnt/virtiofs" succeeds even
if filesystem deivce does not have a cache window and hence DAX can't
be supported.
This gives a false sense to user that they are using DAX with virtiofs
but fact of the matter is that they are not.
Fix this by returning error if dax can't be supported and user has asked
for it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Commit 5d069dbe8aaf ("fuse: fix bad inode") replaced make_bad_inode()
in fuse_iget() with a private implementation fuse_make_bad().
The private implementation fails to remove the bad inode from inode
cache, so the retry loop with iget5_locked() finds the same bad inode
and marks it bad forever.
kmsg snip:
[ ] rcu: INFO: rcu_sched self-detected stall on CPU
...
[ ] ? bit_wait_io+0x50/0x50
[ ] ? fuse_init_file_inode+0x70/0x70
[ ] ? find_inode.isra.32+0x60/0xb0
[ ] ? fuse_init_file_inode+0x70/0x70
[ ] ilookup5_nowait+0x65/0x90
[ ] ? fuse_init_file_inode+0x70/0x70
[ ] ilookup5.part.36+0x2e/0x80
[ ] ? fuse_init_file_inode+0x70/0x70
[ ] ? fuse_inode_eq+0x20/0x20
[ ] iget5_locked+0x21/0x80
[ ] ? fuse_inode_eq+0x20/0x20
[ ] fuse_iget+0x96/0x1b0
Fixes: 5d069dbe8aaf ("fuse: fix bad inode")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
replace_page_cache_page()
Since commit 74d609585d8b ("page cache: Add and replace pages using the
XArray") was merged, the replace_page_cache_page() can not fail and always
return 0, we can remove the redundant return value and void it. Moreover
remove the unused gfp_mask.
Link: https://lkml.kernel.org/r/609c30e5274ba15d8b90c872fd0d8ac437a9b2bb.1610071401.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
