summaryrefslogtreecommitdiff
path: root/fs/cifs
AgeCommit message (Collapse)Author
2018-06-02CIFS: Add support for direct pages in rdataLong Li
Add a function to allocate rdata without allocating pages for data transfer. This gives the caller an option to pass a number of pages that point to the data buffer. rdata is still reponsible for free those pages after it's done. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-06-02cifs: update multiplex loop to handle compounded responsesRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-06-01cifs: remove header_preamble_size where it is always 0Ronnie Sahlberg
Since header_preamble_size is 0 for SMB2+ we can remove it in those code paths that are only invoked from SMB2. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-01cifs: remove struct smb2_hdrRonnie Sahlberg
struct smb2_hdr is now just a wrapper for smb2_sync_hdr. We can thus get rid of smb2_hdr completely and access the sync header directly. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-06-01CIFS: 511c54a2f69195b28afb9dd119f03787b1625bb4 adds a check for session ↵Mark Syms
expiry, status STATUS_NETWORK_SESSION_EXPIRED, however the server can also respond with STATUS_USER_SESSION_DELETED in cases where the session has been idle for some time and the server reaps the session to recover resources. Handle this additional status in the same way as SESSION_EXPIRED. Signed-off-by: Mark Syms <mark.syms@citrix.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-05-31cifs: change smb2_get_data_area_len to take a smb2_sync_hdr as argumentRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: update smb2_calc_size to use smb2_sync_hdr instead of smb2_hdrRonnie Sahlberg
smb2_hdr is just a wrapper around smb2_sync_hdr at this stage and smb2_hdr is going away. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: remove struct smb2_oplock_break_rspRonnie Sahlberg
The two structures smb2_oplock_breaq_req/rsp are now basically identical. Replace this with a single definition of a smb2_oplock_break structure. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31cifs: remove rfc1002 header from all SMB2 response structuresRonnie Sahlberg
Separate out all the 4 byte rfc1002 headers so that they are no longer part of the SMB2 header structures to prepare for future work to add compounding support. Update the smb3 transform header processing that we no longer have a rfc1002 header at the start of this structure. Update smb2_readv_callback to accommodate that the first iovector in the response is no the smb2 header and no longer a rfc1002 header. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-31smb3: on reconnect set PreviousSessionId fieldSteve French
The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4dc3a4f66f020cfb9286225ecd228ab61d ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <stable@vger.kernel.org> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-31smb3: Add posix create context for smb3.11 posix mountsSteve French
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30smb3: add tracepoints for smb2/smb3 openSteve French
add two tracepoints for open completion. One for error one for completion (open_done). Sample output below TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | bash-15348 [007] .... 42441.027492: smb3_enter: cifs_lookup: xid=45 bash-15348 [007] .... 42441.028214: smb3_cmd_err: sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=105 status=0xc0000034 rc=-2 bash-15348 [007] .... 42441.028219: smb3_open_err: xid=45 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2 bash-15348 [007] .... 42441.028225: smb3_exit_done: cifs_lookup: xid=45 fop777-24560 [002] .... 42442.627617: smb3_enter: cifs_revalidate_dentry_attr: xid=46 fop777-24560 [003] .... 42442.628301: smb3_cmd_err: sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=106 status=0xc0000034 rc=-2 fop777-24560 [003] .... 42442.628319: smb3_open_err: xid=46 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2 fop777-24560 [003] .... 42442.628335: smb3_enter: cifs_atomic_open: xid=47 fop777-24560 [003] .... 42442.629587: smb3_cmd_done: sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=107 fop777-24560 [003] .... 42442.629592: smb3_open_done: xid=47 sid=0x6173e4ce tid=0xa05150e6 fid=0xb8a0984d cr_opts=0x40 des_access=0x40000080 Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: add debug output to show nocase mount optionSteve French
For smb1 nocase can be specified on mount. Allow displaying it in debug data. Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30smb3: add define for id for posix create context and corresponding structSteve French
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: update smb2_check_message to handle PDUs without a 4 byte length headerRonnie Sahlberg
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-30smb3: allow "posix" mount option to enable new SMB311 protocol extensionsSteve French
If "posix" (or synonym "unix" for backward compatibility) specified on mount, and server advertises support for SMB3.11 POSIX negotiate context, then enable the new posix extensions on the tcon. This can be viewed by looking for "posix" in the mount options displayed by /proc/mounts for that mount (ie if posix extensions allowed by server and the experimental POSIX extensions also requested on the mount by specifying "posix" at mount time). Also add check to warn user if conflicting unix/nounix or posix/noposix specified on mount. Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30smb3: add support for posix negotiate contextSteve French
Unlike CIFS where UNIX/POSIX extensions had been negotiatable, SMB3 did not have POSIX extensions yet. Add the new SMB3.11 POSIX negotiate context to ask the server whether it can support POSIX (and thus whether we can send the new POSIX open context). Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: allow disabling less secure legacy dialectsSteve French
To improve security it may be helpful to have additional ways to restrict the ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0 are weaker and less secure. Add a module parameter "disable_legacy_dialects" (/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to 1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount. Also cleans up a few build warnings about globals for various module parms. Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: make minor clarifications to module params for cifs.koSteve French
Note which ones of the module params are cifs dialect only (N/A for default dialect now that has moved to SMB2.1 or later) Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-30cifs: show the "w" bit for writeable /proc/fs/cifs/* filesRonnie Sahlberg
RHBZ: 1539612 Lets show the "w" bit for those files have a .write interface to set/enable/... the feature. Reported-by: Xiaoli Feng <xifeng@redhat.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-30smb3: add module alias for smb3 to cifs.koSteve French
We really don't want to be encouraging people to use the old (less secure) cifs dialect (SMB1) and it can be confusing for them with SMB3 (or later) being recommended but the module name is cifs. Add a module alias for "smb3" to cifs.ko to make this less confusing. Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30cifs: return error on invalid value written to cifsFYIRonnie Sahlberg
RHBZ: 1539617 Check that, if it is not a boolean, the value the user tries to write to /proc/fs/cifs/cifsFYI is valid and return an error if not. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Xiaoli Feng <xifeng@redhat.com>
2018-05-30cifs: invalidate cache when we truncate a fileRonnie Sahlberg
RHBZ: 1566345 When truncating a file we always do this synchronously to the server. Thus we need to make sure that the cached inode metadata is marked as stale so that on next getattr we will refresh the metadata. In this particular bug we want to ensure that both ctime and mtime are updated and become visible to the application after a truncate. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Xiaoli Feng <xifeng@redhat.com>
2018-05-30smb3: print tree id in debugdata in proc to be able to help loggingSteve French
When loooking at the logs for the new trace-cmd tracepoints for cifs, it would help to know which tid is for which share (UNC name) so update /proc/fs/cifs/DebugData to display the tid. Also display Maximal Access which was missing as well. Now the entry for typical entry for a tcon (in proc/fs/cifs/) looks like: 1) \\localhost\test Mounts: 1 DevInfo: 0x20 Attributes: 0x1006f PathComponentMax: 255 Status: 1 type: DISK Share Capabilities: None Aligned, Partition Aligned, Share Flags: 0x0 tid: 0xe0632a55 Optimal sector size: 0x200 Maximal Access: 0x1f01ff Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30smb3: add additional ftrace entry points for entry/exit to cifs.koSteve French
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-30smb3: fix various xid leaksSteve French
Fix a few cases where we were not freeing the xid which led to active requests being non-zero at unmount time. Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-30CIFS: Introduce offset for the 1st page in data transfer structuresLong Li
When direct I/O is used, the data buffer may not always align to page boundaries. Introduce a page offset in transport data structures to describe the location of the buffer within the page. Also change the function to pass the page offset when sending data to transport. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2018-05-27smb3: Add ftrace tracepoints for improved SMB3 debuggingSteve French
Although dmesg logs and wireshark network traces can be helpful, being able to dynamically enable/disable tracepoints (in this case via the kernel ftrace mechanism) can also be helpful in more quickly debugging problems, and more selectively tracing the events related to the bug report. This patch adds 12 ftrace tracepoints to cifs.ko for SMB3 events in some obvious locations. Subsequent patches will add more as needed. Example use: trace-cmd record -e cifs <run test case> trace-cmd show Various trace events can be filtered. See: trace-cmd list | grep cifs for the current list of cifs tracepoints. Sample output (from mount and writing to a file): root@smf:/sys/kernel/debug/tracing/events/cifs# trace-cmd show <snip> mount.cifs-6633 [006] .... 7246.936461: smb3_cmd_done: pid=6633 tid=0x0 sid=0x0 cmd=0 mid=0 mount.cifs-6633 [006] .... 7246.936701: smb3_cmd_err: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=1 status=0xc0000016 rc=-5 mount.cifs-6633 [006] .... 7246.943055: smb3_cmd_done: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=2 mount.cifs-6633 [006] .... 7246.943298: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=3 mid=3 mount.cifs-6633 [006] .... 7246.943446: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=4 mount.cifs-6633 [006] .... 7246.943659: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=3 mid=5 mount.cifs-6633 [006] .... 7246.943766: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=11 mid=6 mount.cifs-6633 [006] .... 7246.943937: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=7 mount.cifs-6633 [006] .... 7246.944020: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=8 mount.cifs-6633 [006] .... 7246.944091: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=9 mount.cifs-6633 [006] .... 7246.944163: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=10 mount.cifs-6633 [006] .... 7246.944218: smb3_cmd_err: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=11 status=0xc0000225 rc=-2 mount.cifs-6633 [006] .... 7246.944219: smb3_fsctl_err: xid=0 fid=0xffffffffffffffff tid=0xf9447636 sid=0x3d9cf8e5 class=0 type=393620 rc=-2 mount.cifs-6633 [007] .... 7246.944353: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=12 bash-2071 [000] .... 7256.903844: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=13 bash-2071 [000] .... 7256.904172: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=14 bash-2071 [000] .... 7256.904471: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=15 bash-2071 [000] .... 7256.904950: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=16 bash-2071 [000] .... 7256.905305: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=17 bash-2071 [000] .... 7256.905688: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=6 mid=18 bash-2071 [000] .... 7256.905809: smb3_write_done: xid=0 fid=0xd628f511 tid=0xe1b781a sid=0x3d9cf8e5 offset=0x0 len=0x1b Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-27smb3: rename encryption_required to smb3_encryption_requiredSteve French
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27cifs: update internal module version number for cifs.ko to 2.12Steve French
Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27cifs: add a new SMB2_close_flags functionRonnie Sahlberg
And make SMB2_close just a wrapper for SMB2_close_flags. We need this as we will start to send SMB2_CLOSE pdus using special flags. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27cifs: store the leaseKey in the fid on SMB2_openRonnie Sahlberg
In SMB2_open(), if we got a lease we need to store this in the fid structure or else we will never be able to map a lease break back to which file/fid it applies to. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27cifs: fix build break when CONFIG_CIFS_DEBUG2 enabledSteve French
Previous patches "cifs: update calc_size to take a server argument" and "cifs: add server argument to the dump_detail method" were broken if CONFIG_CIFS_DEBUG2 enabled Signed-off-by: Steve French <smfrench@gmail.com> CC: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-27cifs: update calc_size to take a server argumentRonnie Sahlberg
and change the smb2 version to take heder_preamble_size into account instead of hardcoding it as 4 bytes. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27cifs: add server argument to the dump_detail methodRonnie Sahlberg
We need a struct TCP_Server_Info *server to this method as it calls calc_size. The calc_size method will soon be changed to also take a server argument. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-27smb3: fix redundant opens on rootSteve French
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share over and over again in various places during mount and path revalidation and also in statfs. This patch cuts redundant traffic (opens and closes) by simply keeping the directory handle for the root around (and reopening it as needed on reconnect), so query calls don't require three round trips to copmlete - just one, and eases load on network, client and server (on mount alone, cuts network traffic by more than a third). Also add a new cifs mount parm "nohandlecache" to allow users whose servers might have resource constraints (eg in case they have a server with so many users connecting to it that this extra handle per mount could possibly be a resource concern). Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...
2018-05-22cifs_lookup(): switch to d_splice_alias()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-22cifs_lookup(): cifs_get_inode_...() never returns 0 with *inode left NULLAl Viro
not since 2004... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-10smb3: directory sync should not return an errorSteve French
As with NFS, which ignores sync on directory handles, fsync on a directory handle is a noop for CIFS/SMB3. Do not return an error on it. It breaks some database apps otherwise. Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-05-09cifs: smb2ops: Fix listxattr() when there are no EAsPaulo Alcantara
As per listxattr(2): On success, a nonnegative number is returned indicating the size of the extended attribute name list. On failure, -1 is returned and errno is set appropriately. In SMB1, when the server returns an empty EA list through a listxattr(), it will correctly return 0 as there are no EAs for the given file. However, in SMB2+, it returns -ENODATA in listxattr() which is wrong since the request and response were sent successfully, although there's no actual EA for the given file. This patch fixes listxattr() for SMB2+ by returning 0 in cifs_listxattr() when the server returns an empty list of EAs. Signed-off-by: Paulo Alcantara <palcantara@suse.de> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-05-09cifs: smbd: Enable signing with smbdirectLong Li
Now signing is supported with RDMA transport. Remove the code that disabled it. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-05-09cifs: Allocate validate negotiation request through kmallocLong Li
The data buffer allocated on the stack can't be DMA'ed, ib_dma_map_page will return an invalid DMA address for a buffer on stack. Even worse, this incorrect address can't be detected by ib_dma_mapping_error. Sending data from this address to hardware will not fail, but the remote peer will get junk data. Fix this by allocating the request on the heap in smb3_validate_negotiate. Changes in v2: Removed duplicated code on freeing buffers on function exit. (Thanks to Parav Pandit <parav@mellanox.com>) Fixed typo in the patch title. Changes in v3: Added "Fixes" to the patch. Changed several sizeof() to use *pointer in place of struct. Changes in v4: Added detailed comments on the failure through RDMA. Allocate request buffer using GPF_NOFS. Fixed possible memory leak. Changes in v5: Removed variable ret for checking return value. Changed to use pneg_inbuf->Dialects[0] to calculate unused space in pneg_inbuf. Fixes: ff1c038addc4 ("Check SMB3 dialects against downgrade attacks") Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Tom Talpey <ttalpey@microsoft.com>
2018-05-09IB: remove redundant INFINIBAND kconfig dependenciesGreg Thelen
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Doug Ledford: "This is our first pull request of the rc cycle. It's not that it's been overly quiet, we were just waiting on a few things before sending this off. For instance, the 6 patch series from Intel for the hfi1 driver had actually been pulled in on Tuesday for a Wednesday pull request, only to have Jason notice something I missed, so we held off for some testing, and then on Thursday had to respin the series because the very first patch needed a minor fix (unnecessary cast is all). There is a sizable hns patch series in here, as well as a reasonably largish hfi1 patch series, then all of the lines of uapi updates are just the change to the new official Linux-OpenIB SPDX tag (a bunch of our files had what amounts to a BSD-2-Clause + MIT Warranty statement as their license as a result of the initial code submission years ago, and the SPDX folks decided it was unique enough to warrant a unique tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4 and core/cache/cma updates to round out the bunch. None of it was overly large by itself, but in the 2 1/2 weeks we've been collecting patches, it has added up :-/. As best I can tell, it's been through 0day (I got a notice about my last for-next push, but not for my for-rc push, but Jason seems to think that failure messages are prioritized and success messages not so much). It's also been through linux-next. And yes, we did notice in the context portion of the CMA query gid fix patch that there is a dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage and remove it anywhere we can. Summary: - Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off) - SPDX license tag cleanups (new tag Linux-OpenIB) - RoCE GID fixes related to default GIDs - Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch), mlx4, mlx5, and hfi1 (medium batch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits) RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used IB/hfi1: Fix loss of BECN with AHG IB/hfi1 Use correct type for num_user_context IB/hfi1: Fix handling of FECN marked multicast packet IB/core: Make ib_mad_client_id atomic iw_cxgb4: Atomically flush per QP HW CQEs IB/uverbs: Fix kernel crash during MR deregistration flow IB/uverbs: Prevent reregistration of DM_MR to regular MR RDMA/mlx4: Add missed RSS hash inner header flag RDMA/hns: Fix a couple misspellings RDMA/hns: Submit bad wr RDMA/hns: Update assignment method for owner field of send wqe RDMA/hns: Adjust the order of cleanup hem table RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set RDMA/hns: Remove some unnecessary attr_mask judgement RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set ...
2018-04-27cifs: smbd: depend on INFINIBAND_ADDR_TRANSGreg Thelen
CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-25cifs: smbd: Avoid allocating iov on the stackLong Li
It's not necessary to allocate another iov when going through the buffers in smbd_send() through RDMA send. Remove it to reduce stack size. Thanks to Matt for spotting a printk typo in the earlier version of this. CC: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Long Li <longli@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <smfrench@gmail.com>
2018-04-25cifs: smbd: Don't use RDMA read/write when signing is usedLong Li
SMB server will not sign data transferred through RDMA read/write. When signing is used, it's a good idea to have all the data signed. In this case, use RDMA send/recv for all data transfers. This will degrade performance as this is not generally configured in RDMA environemnt. So warn the user on signing and RDMA send/recv. Signed-off-by: Long Li <longli@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <smfrench@gmail.com>
2018-04-25SMB311: Fix reconnectSteve French
The preauth hash was not being recalculated properly on reconnect of SMB3.11 dialect mounts (which caused access denied repeatedly on auto-reconnect). Fixes: 8bd68c6e47ab ("CIFS: implement v3.11 preauth integrity") Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:03:15 +0000