| Age | Commit message (Collapse) | Author |
|---|
|
If the auth cap migrates to another MDS, clear requested_max_size so that
we resend any pending max_size increase requests. This fixes potential
hangs on writes that extend a file and race with an cap migration between
MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Only the auth MDS has a meaningful max_size value for us, so only update it
in fill_inode if we're being issued an auth cap. Otherwise, a random
stat result from a non-auth MDS can clobber a meaningful max_size, get
the client<->mds cap state out of sync, and make writes hang.
Specifically, even if the client re-requests a larger max_size (which it
will), the MDS won't respond because as far as it knows we already have a
sufficiently large value.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Normally when we open a file we already have a cap, and simply update the
wanted set. However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS. Only
reuse existing caps if we are opening for read or the existing cap is auth.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We dereference *in a few lines down, but only set it on rename. It is
apparently pretty rare for this to trigger, but I have been hitting it
with a clustered MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This reverts commit d91f2438d881514e4a923fd786dbd94b764a9440.
The intent of issue_seq is to distinguish between mds->client messages that
(re)create the cap and those that do not, which means we should _only_ be
updating that value in the create paths. By updating it in handle_cap_grant,
we reset it to zero, which then breaks release.
The larger question is what workload/problem made me think it should be
updated here...
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This removes more dead code that was somehow missed by commit 0d99519efef
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We were taking dcache_lock inside of i_lock, which introduces a dependency
not found elsewhere in the kernel, complicationg the vfs locking
scalability work. Since we don't actually need it here anyway, remove
it.
We only need i_lock to test for the I_COMPLETE flag, so be careful to do
so without dcache_lock held.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Convert a sequence of kmalloc and memcpy to use kmemdup.
The semantic patch that performs this transformation is:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a,flag,len;
expression arg,e1,e2;
statement S;
@@
a =
- \(kmalloc\|kzalloc\)(len,flag)
+ kmemdup(arg,len,flag)
<... when != a
if (a == NULL || ...) S
...>
- memcpy(a,arg,len+1);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Include "super.h" outside of CONFIG_DEBUG_FS to eliminate a compiler warning:
fs/ceph/debugfs.c:266: warning: 'struct ceph_fs_client' declared inside parameter list
fs/ceph/debugfs.c:266: warning: its scope is only this definition or declaration, which is probably not what you want
fs/ceph/debugfs.c:271: warning: 'struct ceph_fs_client' declared inside parameter list
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
|
|
Switch from using the BKL explicitly to the new lock_flocks() interface.
Eventually this will turn into a spinlock.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
When the lock_kernel() turns into lock_flocks() and a spinlock, we won't
be able to do allocations with the lock held. Preallocate space without
the lock, and retry if the lock state changes out from underneath us.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This is simpler and faster.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The i_rdcache_gen value only implies we MAY have cached pages; actually
check the mapping to see if it's worth bothering with an invalidate.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Snaps in the root directory are now supported by the MDS, and harmless on
older versions.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This will be used for rbd snapshots administration.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
|
|
Allow the messenger to send/receive data in a bio. This is added
so that we wouldn't need to copy the data into pages or some other buffer
when doing IO for an rbd block device.
We can now have trailing variable sized data for osd
ops. Also osd ops encoding is more modular.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The osd requests creation are being decoupled from the
vino parameter, allowing clients using the osd to use
other arbitrary object names that are not necessarily
vino based. Also, calc_raw_layout now takes a snap id.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Implement a pool lookup by name. This will be used by rbd.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We need to update the issue_seq on any grant operation, be it via an MDS
reply or a separate grant message. The update in the grant path was
missing. This broke cap release for inodes in which the MDS sent an
explicit grant message that was not soon after followed by a successful
MDS reply on the same inode.
Also fix the signedness on seq locals.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If an MDS tries to revoke caps that we don't have, we want to send
releases early since they probably contain the caps message the MDS
is looking for.
Previously, we only sent the messages if we didn't have the inode either. But
in a multi-mds system we can retain the inode after dropping all caps for
a single MDS.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
encode_fh on error should update max_len with minimum required
size, so that caller can redo the call with the reallocated buffer.
This is required with open by handle patch series
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
encode_fh function should return 255 on error as done by other file
system to indicate EOVERFLOW. Also max_len is in sizeof(u32) units
and not in bytes.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we interrupt an osd request, we call __cancel_request, but it wasn't
verifying that req->r_osd was non-NULL before dereferencing it. This could
cause a crash if osds were flapping and we aborted a request on said osd.
Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Fix argument order.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We select CRYPTO_AES, but not CRYPTO.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).
This allows the MDS RECALL_STATE process work for inodes that have cached
pages.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once. It's also a waste.
So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context. To fix this, we:
- move inodes completely to the new (split) realm so that i_snap_realm
is correct, and
- generate the new snapc's _before_ queueing the cap_snaps in
ceph_update_snap_trace().
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Stop sending FLUSHSNAP messages when we hit a capsnap that has dirty_pages
or is still writing. We'll send the newer capsnaps only after the older
ones complete.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
The 'follows' should match the seq for the snap context for the given snap
cap, which is the context under which we have been dirtying and writing
data and metadata. The snapshot that _contains_ those updates thus
_follows_ that context's seq #.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
When adding the readdir results to the cache, ceph_set_dentry_offset was
clobbered our just-set offset. This can cause the readdir result offsets
to get out of sync with the server. Add an argument to the helper so
that it does not.
This bug was introduced by 1cd3935bedccf592d44343890251452a6dd74fc4.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Cast the value before shifting so that we don't run out of bits with a
32-bit unsigned long. This fixes wrapping of high file offsets into the
low 4GB of a file on disk, and the subsequent data corruption for large
files.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Fix the reconnect encoding to encode the cap record when the MDS does not
have the FLOCK capability (i.e., pre v0.22).
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
A wrong parameter was passed to the kunmap.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
When we release a root dentry, particularly after a splice, the parent
(actually our) inode was evaluating to NULL and was getting dereferenced
by ceph_snap(). This is reproduced by something as simple as
mount -t ceph monhost:/a/b mnt
mount -t ceph monhost:/a mnt2
ls mnt2
A splice_dentry() would kill the old 'b' inode's root dentry, and we'd
crash while releasing it.
Fix by checking for both the ROOT and NULL cases explicitly. We only need
to invalidate the parent dir when we have a correct parent to invalidate.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
get_ticket_handler() returns a valid pointer or it returns
ERR_PTR(-ENOMEM) if kzalloc() fails.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We are in a position to return an error; do that instead.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to
handle NULL returns.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Just scrubbing some warnings so I can see real problem ones in the build
noise. For 32bit we need to coax gcc politely into believing we really
honestly intend to the casts. Using (u64)(unsigned long) means we cast from
a pointer to a type of the right size and then extend it. This stops the
warning spew.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
ceph_get_inode() returns an ERR_PTR and it doesn't return a NULL.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under. It is used by queue_cap_snap to set up
the cap_snap. However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps. This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
Fix argument order. We want to move the item to the end of the list, not
change the position of the head.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
If we hold the EXCL cap, we cannot trust the dir stats from the MDS (num
files, subdirs) and must not incorrectly conclude that the directory is
empty. If we do, we get can bad results from lookup (bad ENOENT) and
bad readdir results.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.
Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
When making a request in the virtual snapdir or a snapped portion of the
namespace, we should choose the MDS based on the first nonsnap parent (and
its caps). If that is not the best place, we will get forward hints to
find the right MDS in the cluster. This fixes ESTALE errors when using
the .snap directory and namespace with multiple MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
|
|
When a realm is updated, we need to queue writeback on inodes in that
realm _and_ its children. Otherwise, if the inode gets cowed on the
server, we can get a hang later due to out-of-sync cap/snap state.
Signed-off-by: Sage Weil <sage@newdream.net>
|
