summaryrefslogtreecommitdiff
path: root/fs/ceph/addr.c
AgeCommit message (Collapse)Author
2020-03-30ceph: switch to page_mkwrite_check_truncate in ceph_page_mkwriteAndreas Gruenbacher
Use the "page has been truncated" logic in page_mkwrite_check_truncate instead of reimplementing it here. Other than with the existing code, fail with -EFAULT / VM_FAULT_NOPAGE when page_offset(page) == size here as well, as should be expected. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-30ceph: move ceph_osdc_{read,write}pages to ceph.koXiubo Li
Since these helpers are only used by ceph.ko, move them there and rename them with _sync_ qualifiers. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-30ceph: don't ClearPageChecked in ceph_invalidatepage()Jeff Layton
CephFS doesn't set this bit to begin with, so there should be no need to clear it. Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: use release_pages() directlyJohn Hubbard
release_pages() has been available to modules since Oct, 2010, when commit 0be8557bcd34 ("fuse: use release_pages()") added EXPORT_SYMBOL(release_pages). However, this ceph code was still using a workaround. Remove the workaround, and call release_pages() directly. Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: don't freeze during write page faultsJeff Layton
Prevent freezing operations during write page faults. This is good practice for most filesystems, but especially for ceph since we're monkeying with the signal table here. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: don't SetPageError on writepage errorsJeff Layton
We already mark the mapping in that case, and doing this can cause false positives to occur at fsync time, as well as spurious read errors. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: auto reconnect after blacklistedYan, Zheng
Make client use osd reply and session message to infer if itself is blacklisted. Client reconnect to cluster using new entity addr if it is blacklisted. Auto reconnect is limited to once every 30 minutes. Auto reconnect is disabled by default. It can be enabled/disabled by recover_session=<no|clean> mount option. In 'clean' mode, client drops any dirty data/metadata, invalidates page caches and invalidates all writable file handles. After reconnect, file locks become stale because MDS loses track of them. If an inode contains any stale file locks, read/write on the indoe are not allowed until applications release all stale file locks. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16ceph: pass filp to ceph_get_caps()Yan, Zheng
Also change several other functions' arguments, no logical changes. This is preparetion for later patch that checks filp error. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-22ceph: clear page dirty before invalidate pageErqi Chen
clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage(). invalidatepage() clears page's private flag, if dirty flag is not cleared, the page may cause BUG_ON failure in ceph_set_page_dirty(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/40862 Signed-off-by: Erqi Chen <chenerqi@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: increment change_attribute on local changesJeff Layton
We don't set SB_I_VERSION on ceph since we need to manage it ourselves, so we must increment it whenever we update the file times. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-07ceph: use vmf_error() in ceph_filemap_fault()Souptick Joarder
This code is converted to use vmf_error(). Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-01-04fs: don't open code lru_to_page()Nikolay Borisov
Multiple filesystems open code lru_to_page(). Rectify this by moving the macro from mm_inline (which is specific to lru stuff) to the more generic mm.h header and start using the macro where appropriate. No functional changes. Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Pankaj gupta <pagupta@redhat.com> Acked-by: "Yan, Zheng" <zyan@redhat.com> [ceph] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-22ceph: add non-blocking parameter to ceph_try_get_caps()Luis Henriques
ceph_try_get_caps currently calls try_get_cap_refs with the nonblock parameter always set to 'true'. This change adds a new parameter that allows to set it's value. This will be useful for a follow-up patch that will need to get two sets of capabilities for two different inodes without risking a deadlock. Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02ceph: adding new return type vm_fault_tSouptick Joarder
Use new return type vm_fault_t for page_mkwrite and fault handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: use timespec64 for r_mtimeArnd Bergmann
The request mtime field is used all over ceph, and is currently represented as a 'timespec' structure in Linux. This changes it to timespec64 to allow times beyond 2038, modifying all users at the same time. [ Remove now redundant ts variable in writepage_nounlock(). ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-15Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The main piece is a set of libceph changes that revamps how OSD requests are aborted, improving CephFS ENOSPC handling and making "umount -f" actually work (Zheng and myself). The rest is mostly mount option handling cleanups from Chengguang and assorted fixes from Zheng, Luis and Dongsheng. * tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits) rbd: flush rbd_dev->watch_dwork after watch is unregistered ceph: update description of some mount options ceph: show ino32 if the value is different with default ceph: strengthen rsize/wsize/readdir_max_bytes validation ceph: fix alignment of rasize ceph: fix use-after-free in ceph_statfs() ceph: prevent i_version from going back ceph: fix wrong check for the case of updating link count libceph: allocate the locator string with GFP_NOFAIL libceph: make abort_on_full a per-osdc setting libceph: don't abort reads in ceph_osdc_abort_on_full() libceph: avoid a use-after-free during map check libceph: don't warn if req->r_abort_on_full is set libceph: use for_each_request() in ceph_osdc_abort_on_full() libceph: defer __complete_request() to a workqueue libceph: move more code into __complete_request() libceph: no need to call flush_workqueue() before destruction ceph: flush pending works before shutdown super ceph: abort osd requests on force umount libceph: introduce ceph_osdc_abort_requests() ...
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-06-04libceph: make abort_on_full a per-osdc settingIlya Dryomov
The intent behind making it a per-request setting was that it would be set for writes, but not for reads. As it is, the flag is set for all fs/ceph requests except for pool perm check stat request (technically a read). ceph_osdc_abort_on_full() skips reads since the previous commit and I don't see a use case for marking individual requests. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-04-02ceph: don't wait on writeback when there is no more dirty pagesYan, Zheng
In sync mode, writepages() needs to write all dirty pages. But it can only write dirty pages associated with the oldest snapc. To write dirty pages associated with next snapc, it needs to wait until current writes complete. If there is no more dirty pages, writepages() should not wait on writeback. Otherwise, dirty page writeback becomes very slow. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02ceph: invalidate pages that beyond EOF in ceph_writepages_start()Yan, Zheng
Dirty pages can be associated with different capsnap. Different capsnap may have different EOF value. So invalidating dirty pages according to the largest EOF value is wrong. Dirty pages beyond EOF, but associated with other capsnap, do not get invalidated. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02ceph: change variable name to follow common ruleChengguang Xu
Variable name ci is mostly used for ceph_inode_info. Variable name fi is mostly used for ceph_file_info. Variable name cf is mostly used for ceph_cap_flush. Change variable name to follow above common rules in case of confusing. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: move ceph_calc_file_object_mapping() to striper.cIlya Dryomov
ceph_calc_file_object_mapping() has nothing to do with osdmaps. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: change ceph_calc_file_object_mapping() signatureIlya Dryomov
- make it void - xlen (object extent length) out parameter should be u32 because only a single stripe unit is mapped at a time Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2018-01-29ceph: fix un-balanced fsc->writeback_count updateYan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-01-29ceph: track read contexts in ceph_file_infoYan, Zheng
Previously ceph_read_iter() uses current->journal to pass context info to ceph_readpages(), so that ceph_readpages() can distinguish read(2) from readahead(2)/fadvise(2)/madvise(2). The problem is that page fault can happen when copying data to userspace memory. Page fault may call other filesystem's page_mkwrite() if the userspace memory is mapped to a file. The later filesystem may also want to use current->journal. The fix is define a on-stack data structure in ceph_read_iter(), add it to context list in ceph_file_info. ceph_readpages() searches the list, find if there is a context belongs to current thread. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-11-15mm, pagevec: remove cold parameter for pagevecsMel Gorman
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: remove nr_pages argument from pagevec_lookup_{,range}_tag()Jan Kara
All users of pagevec_lookup() and pagevec_lookup_range() now pass PAGEVEC_SIZE as a desired number of pages. Just drop the argument. Link: http://lkml.kernel.org/r/20171009151359.31984-15-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15ceph: use pagevec_lookup_range_nr_tag()Jan Kara
Use new function for looking up pages since nr_pages argument from pagevec_lookup_range_tag() is going away. Link: http://lkml.kernel.org/r/20171009151359.31984-14-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15ceph: use pagevec_lookup_range_tag()Jan Kara
We want only pages from given range in ceph_writepages_start(). Use pagevec_lookup_range_tag() instead of pagevec_lookup_tag() and remove unnecessary code. Link: http://lkml.kernel.org/r/20171009151359.31984-4-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-06ceph: wait on writeback after writing snapshot dataYan, Zheng
In sync mode, writepages() needs to write all dirty pages. But it can only write dirty pages associated with the oldest snapc. To write dirty pages associated with next snapc, it needs to wait until current writes complete. Without this wait, writepages() keeps looking up dirty pages, but the found dirty pages are not writeable. It wastes CPU time. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: fix capsnap dirty pages accountingYan, Zheng
writepages_finish() calls ceph_put_wrbuffer_cap_refs() once for all pages, parameter snapc is set to req->r_snapc. So writepages() shouldn't write dirty pages associated with different snapc in one OSD request. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: ignore wbc->range_{start,end} when write back snapshot dataYan, Zheng
writepages() needs to write dirty pages to OSD in strict order of snapshot context. It must first write dirty pages associated with the oldest snapshot context. In the write range case, dirty pages in the specified range can be associated with newer snapc. They are not writeable until we write all dirty pages associated with the oldest snapc. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: fix "range cyclic" mode writepagesYan, Zheng
In range cyclic mode, writepages() should first write dirty pages in range [writeback_index, (pgoff_t)-1], then write pages in range [0, writeback_index -1]. Besides, if writepages() encounters a page that beyond EOF, it should restart from the beginning. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: cleanup local variables in ceph_writepages_start()Yan, Zheng
Remove two variables and define variables of same type together. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: optimize pagevec iterating in ceph_writepages_start()Yan, Zheng
ceph_writepages_start() supports writing non-continuous pages. If it encounters a non-dirty or non-writeable page in pagevec, it can continue to check the rest pages in pagevec. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: make writepage_nounlock() invalidate page that beyonds EOFYan, Zheng
Otherwise, the page left in state that page is associated with a snapc, but (PageDirty(page) || PageWriteback(page)) is false. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: properly get capsnap's size in get_oldest_context()Yan, Zheng
capsnap's size is set by __ceph_finish_cap_snap(). If capsnap is under writing, its size is zero. In this case, get_oldest_context() should read i_size. Besides, ceph_writepages_start() should re-check capsnap's size after dirty pages get locked. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: remove stale check in ceph_invalidatepage()Yan, Zheng
Both set_page_dirty and truncate_complete_page should be called for locked page, they can't race with each other. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: adjust 36 checks for NULL pointersMarkus Elfring
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written ... Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: include snapc in debug message of writeYan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: nuke startsync opYanhu Cao
startsync is a no-op, has been for years. Remove it. Link: http://tracker.ceph.com/issues/20604 Signed-off-by: Yanhu Cao <gmayyyha@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: limit osd write sizeYan, Zheng
OSD has a configurable limitation of max write size. OSD return error if write request size is larger than the limitation. For now, set max write size to CEPH_MSG_MAX_DATA_LEN. It should be small enough. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-06ceph: limit osd read size to CEPH_MSG_MAX_DATA_LENYan, Zheng
libceph returns -EIO when read size > CEPH_MSG_MAX_DATA_LEN. Link: http://tracker.ceph.com/issues/20528 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-09-01ceph: fix readpage from fscacheYan, Zheng
ceph_readpage() unlocks page prematurely prematurely in the case that page is reading from fscache. Caller of readpage expects that page is uptodate when it get unlocked. So page shoule get locked by completion callback of fscache_read_or_alloc_pages() Cc: stable@vger.kernel.org # 4.1+, needs backporting for < 4.7 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: cleanup writepage_nounlock()Yan, Zheng
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: redirty page when writepage_nounlock() skips unwritable pageYan, Zheng
Ceph needs to flush dirty page in the order in which in which snap context they belong to. Dirty pages belong to older snap context should be flushed earlier. if writepage_nounlock() can not flush a page, it should redirty the page. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-07-07ceph: remove useless page->mapping check in writepage_nounlock()Yan, Zheng
Callers of writepage_nounlock() have already ensured non-null page->mapping. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 21:14:55 +0000