| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tiny race window during 2 transactions aborting at the same time can
accidentally lead to a commit
- regression fix, possible deadlock during fiemap
- fix for an old bug when incremental send can fail on a file that has
been deduplicated in a special way
* tag 'for-5.3-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix deadlock between fiemap and transaction commits
Btrfs: fix race leading to fs corruption after transaction abort
Btrfs: fix incremental send failure after deduplication
|
|
The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:
(...)
[404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
[404571.515956] Call Trace:
[404571.516360] ? __schedule+0x3ae/0x7b0
[404571.516730] schedule+0x3a/0xb0
[404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs]
[404571.517465] ? remove_wait_queue+0x60/0x60
[404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs]
[404571.518202] normal_work_helper+0xea/0x530 [btrfs]
[404571.518566] process_one_work+0x21e/0x5c0
[404571.518990] worker_thread+0x4f/0x3b0
[404571.519413] ? process_one_work+0x5c0/0x5c0
[404571.519829] kthread+0x103/0x140
[404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70
[404571.520565] ret_from_fork+0x3a/0x50
[404571.520915] kworker/u8:6 D 0 31651 2 0x80004000
[404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
(...)
[404571.537000] fsstress D 0 13117 13115 0x00004000
[404571.537263] Call Trace:
[404571.537524] ? __schedule+0x3ae/0x7b0
[404571.537788] schedule+0x3a/0xb0
[404571.538066] wait_current_trans+0xc8/0x100 [btrfs]
[404571.538349] ? remove_wait_queue+0x60/0x60
[404571.538680] start_transaction+0x33c/0x500 [btrfs]
[404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs]
[404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs]
[404571.539866] extent_fiemap+0x2ce/0x650 [btrfs]
[404571.540170] do_vfs_ioctl+0x526/0x6f0
[404571.540436] ksys_ioctl+0x70/0x80
[404571.540734] __x64_sys_ioctl+0x16/0x20
[404571.540997] do_syscall_64+0x60/0x1d0
[404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[404571.543729] btrfs D 0 14210 14208 0x00004000
[404571.544023] Call Trace:
[404571.544275] ? __schedule+0x3ae/0x7b0
[404571.544526] ? wait_for_completion+0x112/0x1a0
[404571.544795] schedule+0x3a/0xb0
[404571.545064] schedule_timeout+0x1ff/0x390
[404571.545351] ? lock_acquire+0xa6/0x190
[404571.545638] ? wait_for_completion+0x49/0x1a0
[404571.545890] ? wait_for_completion+0x112/0x1a0
[404571.546228] wait_for_completion+0x131/0x1a0
[404571.546503] ? wake_up_q+0x70/0x70
[404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
[404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
[404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
[404571.547703] ? remove_wait_queue+0x60/0x60
[404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs]
[404571.548226] ? __sb_start_write+0xd4/0x1c0
[404571.548512] ? mnt_want_write_file+0x24/0x50
[404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
[404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
[404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs]
[404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0
[404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0
[404571.550064] ? __handle_mm_fault+0xe3e/0x11f0
[404571.550306] ? do_raw_spin_unlock+0x49/0xc0
[404571.550608] ? _raw_spin_unlock+0x24/0x30
[404571.550976] ? __handle_mm_fault+0xedf/0x11f0
[404571.551319] ? do_vfs_ioctl+0xa2/0x6f0
[404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[404571.552087] do_vfs_ioctl+0xa2/0x6f0
[404571.552355] ksys_ioctl+0x70/0x80
[404571.552621] __x64_sys_ioctl+0x16/0x20
[404571.552864] do_syscall_64+0x60/0x1d0
[404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.
So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.
Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.
CPU 1 CPU 2
<at transaction N>
btrfs_commit_transaction()
(...)
--> sets transaction state to
TRANS_STATE_UNBLOCKED
--> sets fs_info->running_transaction
to NULL
(...)
btrfs_start_transaction()
start_transaction()
wait_current_trans()
--> returns immediately
because
fs_info->running_transaction
is NULL
join_transaction()
--> creates transaction N + 1
--> sets
fs_info->running_transaction
to transaction N + 1
--> adds transaction N + 1 to
the fs_info->trans_list list
--> returns transaction handle
pointing to the new
transaction N + 1
(...)
btrfs_sync_file()
btrfs_start_transaction()
--> returns handle to
transaction N + 1
(...)
btrfs_write_and_wait_transaction()
--> writeback of some extent
buffer fails, returns an
error
btrfs_handle_fs_error()
--> sets BTRFS_FS_STATE_ERROR in
fs_info->fs_state
--> jumps to label "scrub_continue"
cleanup_transaction()
btrfs_abort_transaction(N)
--> sets BTRFS_FS_STATE_TRANS_ABORTED
flag in fs_info->fs_state
--> sets aborted field in the
transaction and transaction
handle structures, for
transaction N only
--> removes transaction from the
list fs_info->trans_list
btrfs_commit_transaction(N + 1)
--> transaction N + 1 was not
aborted, so it proceeds
(...)
--> sets the transaction's state
to TRANS_STATE_COMMIT_START
--> does not find the previous
transaction (N) in the
fs_info->trans_list, so it
doesn't know that transaction
was aborted, and the commit
of transaction N + 1 proceeds
(...)
--> sets transaction N + 1 state
to TRANS_STATE_UNBLOCKED
btrfs_write_and_wait_transaction()
--> succeeds writing all extent
buffers created in the
transaction N + 1
write_all_supers()
--> succeeds
--> we now have a superblock on
disk that points to trees
that refer to at least one
extent buffer that was
never persisted
So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.
Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:
BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
extent for inode 257 without updated inode item, send root is 258, \
parent root is 257
This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.
Example reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our first file. The first half of the file has several 64Kb
# extents while the second half as a single 512Kb extent.
$ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
$ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo
# Create the base snapshot and the parent send stream from it.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
$ btrfs send -f /tmp/1.snap /mnt/mysnap1
# Create our second file, that has exactly the same data as the first
# file.
$ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar
# Create the second snapshot, used for the incremental send, before
# doing the file deduplication.
$ btrfs subvolume snapshot -r /mnt /mnt/mysnap2
# Now before creating the incremental send stream:
#
# 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
# will drop several extent items and add a new one, also updating
# the inode's iversion (sequence field in inode item) by 1, but not
# any other field of the inode;
#
# 2) Deduplicate into a different subrange of file foo in snapshot
# mysnap2. This will replace an extent item with a new one, also
# updating the inode's iversion by 1 but not any other field of the
# inode.
#
# After these two deduplication operations, the inode items, for file
# foo, are identical in both snapshots, but we have different extent
# items for this inode in both snapshots. We want to check this doesn't
# cause send to fail with an error or produce an incorrect stream.
$ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
$ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo
# Create the incremental send stream.
$ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
ERROR: send ioctl failed with -5: Input/output error
This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes:
- hangs caused by a missing barrier in the locking code
- memory leaks of extent_state due to bad handling of a cached
pointer"
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range
btrfs: Fix deadlock caused by missing memory barrier
|
|
btrfs_lock_and_flush_ordered_range() loads given "*cached_state" into
cachedp, which, in general, is NULL. Then, lock_extent_bits() updates
"cachedp", but it never goes backs to the caller. Thus the caller still
see its "cached_state" to be NULL and never free the state allocated
under btrfs_lock_and_flush_ordered_range(). As a result, we will
see massive state leak with e.g. fstests btrfs/005. Fix this bug by
properly handling the pointers.
Fixes: bd80d94efb83 ("btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from
atomic to int") changed the type of blocking_writers but forgot to
adjust relevant code in btrfs_tree_unlock by converting the
smp_mb__after_atomic to smp_mb. This opened up the possibility of a
deadlock due to re-ordering of setting blocking_writers and
checking/waking up the waiter. This particular lockup is explained in a
comment above waitqueue_active() function.
Fix it by converting the memory barrier to a full smp_mb, accounting
for the fact that blocking_writers is a simple integer.
Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int")
Tested-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes for leaks caused by recently merged patches
- one build fix
- a fix to prevent mixing of incompatible features
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't leak extent_map in btrfs_get_io_geometry()
btrfs: free checksum hash on in close_ctree
btrfs: Fix build error while LIBCRC32C is module
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
|
|
btrfs_get_io_geometry() calls btrfs_get_chunk_map() to acquire a reference
on a extent_map, but on normal operation it does not drop this reference
anymore.
This leads to excessive kmemleak reports.
Always call free_extent_map(), not just in the error case.
Fixes: 5f1411265e16 ("btrfs: Introduce btrfs_io_geometry infrastructure")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
fs_info::csum_hash gets initialized in btrfs_init_csum_hash() which is
called by open_ctree().
But it only gets freed if open_ctree() fails, not on normal operation.
This leads to a memory leak like the following found by kmemleak:
unreferenced object 0xffff888132cb8720 (size 96):
comm "mount", pid 450, jiffies 4294912436 (age 17.584s)
hex dump (first 32 bytes):
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000000c9643d4>] crypto_create_tfm+0x2d/0xd0
[<00000000ae577f68>] crypto_alloc_tfm+0x4b/0xb0
[<000000002b5cdf30>] open_ctree+0xb84/0x2060 [btrfs]
[<0000000043204297>] btrfs_mount_root+0x552/0x640 [btrfs]
[<00000000c99b10ea>] legacy_get_tree+0x22/0x40
[<0000000071a6495f>] vfs_get_tree+0x1f/0xc0
[<00000000f180080e>] fc_mount+0x9/0x30
[<000000009e36cebd>] vfs_kern_mount.part.11+0x6a/0x80
[<0000000004594c05>] btrfs_mount+0x174/0x910 [btrfs]
[<00000000c99b10ea>] legacy_get_tree+0x22/0x40
[<0000000071a6495f>] vfs_get_tree+0x1f/0xc0
[<00000000b86e92c5>] do_mount+0x6b0/0x940
[<0000000097464494>] ksys_mount+0x7b/0xd0
[<0000000057213c80>] __x64_sys_mount+0x1c/0x20
[<00000000cb689b5e>] do_syscall_64+0x43/0x130
[<000000002194e289>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Free fs_info::csum_hash in close_ctree() to avoid the memory leak.
Fixes: 6d97c6e31b55 ("btrfs: add boilerplate code for directly including the crypto framework")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If CONFIG_BTRFS_FS is y and CONFIG_LIBCRC32C is m,
building fails:
fs/btrfs/super.o: In function `btrfs_mount_root':
super.c:(.text+0xb7f9): undefined reference to `crc32c_impl'
fs/btrfs/super.o: In function `init_btrfs_fs':
super.c:(.init.text+0x3465): undefined reference to `crc32c_impl'
fs/btrfs/extent-tree.o: In function `hash_extent_data_ref':
extent-tree.c:(.text+0xe60): undefined reference to `crc32c'
extent-tree.c:(.text+0xe78): undefined reference to `crc32c'
extent-tree.c:(.text+0xe8b): undefined reference to `crc32c'
fs/btrfs/dir-item.o: In function `btrfs_insert_xattr_item':
dir-item.c:(.text+0x291): undefined reference to `crc32c'
fs/btrfs/dir-item.o: In function `btrfs_insert_dir_item':
dir-item.c:(.text+0x429): undefined reference to `crc32c'
Select LIBCRC32C to fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As btrfs(5) specified:
Note
If nodatacow or nodatasum are enabled, compression is disabled.
If NODATASUM or NODATACOW set, we should not compress the extent.
Normally NODATACOW is detected properly in run_delalloc_range() so
compression won't happen for NODATACOW.
However for NODATASUM we don't have any check, and it can cause
compressed extent without csum pretty easily, just by:
mkfs.btrfs -f $dev
mount $dev $mnt -o nodatasum
touch $mnt/foobar
mount -o remount,datasum,compress $mnt
xfs_io -f -c "pwrite 0 128K" $mnt/foobar
And in fact, we have a bug report about corrupted compressed extent
without proper data checksum so even RAID1 can't recover the corruption.
(https://bugzilla.kernel.org/show_bug.cgi?id=199707)
Running compression without proper checksum could cause more damage when
corruption happens, as compressed data could make the whole extent
unreadable, so there is no need to allow compression for
NODATACSUM.
The fix will refactor the inode compression check into two parts:
- inode_can_compress()
As the hard requirement, checked at btrfs_run_delalloc_range(), so no
compression will happen for NODATASUM inode at all.
- inode_need_compress()
As the soft requirement, checked at btrfs_run_delalloc_range() and
compress_file_range().
Reported-by: James Harvey <jamespharvey20@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- chunks that have been trimmed and unchanged since last mount are
tracked and skipped on repeated trims
- use hw assissed crc32c on more arches, speedups if native
instructions or optimized implementation is available
- the RAID56 incompat bit is automatically removed when the last
block group of that type is removed
Fixes:
- fsync fix for reflink on NODATACOW files that could lead to ENOSPC
- fix data loss after inode eviction, renaming it, and fsync it
- fix fsync not persisting dentry deletions due to inode evictions
- update ctime/mtime/iversion after hole punching
- fix compression type validation (reported by KASAN)
- send won't be allowed to start when relocation is in progress, this
can cause spurious errors or produce incorrect send stream
Core:
- new tracepoints for space update
- tree-checker: better check for end of extents for some tree items
- preparatory work for more checksum algorithms
- run delayed iput at unlink time and don't push the work to cleaner
thread where it's not properly throttled
- wrap block mapping to structures and helpers, base for further
refactoring
- split large files, part 1:
- space info handling
- block group reservations
- delayed refs
- delayed allocation
- other cleanups and refactoring"
* tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (103 commits)
btrfs: fix memory leak of path on error return path
btrfs: move the subvolume reservation stuff out of extent-tree.c
btrfs: migrate the delalloc space stuff to it's own home
btrfs: migrate btrfs_trans_release_chunk_metadata
btrfs: migrate the delayed refs rsv code
btrfs: Evaluate io_tree in find_lock_delalloc_range()
btrfs: migrate the global_block_rsv helpers to block-rsv.c
btrfs: migrate the block-rsv code to block-rsv.c
btrfs: stop using block_rsv_release_bytes everywhere
btrfs: cleanup the target logic in __btrfs_block_rsv_release
btrfs: export __btrfs_block_rsv_release
btrfs: export btrfs_block_rsv_add_bytes
btrfs: move btrfs_block_rsv definitions into it's own header
btrfs: Simplify update of space_info in __reserve_metadata_bytes()
btrfs: unexport can_overcommit
btrfs: move reserve_metadata_bytes and supporting code to space-info.c
btrfs: move dump_space_info to space-info.c
btrfs: export block_rsv_use_bytes
btrfs: move btrfs_space_info_add_*_bytes to space-info.c
btrfs: move the space info update macro to space-info.h
...
|
|
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
|
|
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"This contains cleanups of the fsnotify name removal hook and also a
patch to disable fanotify permission events for 'proc' filesystem"
* tag 'fsnotify_for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: get rid of fsnotify_nameremove()
fsnotify: move fsnotify_nameremove() hook out of d_delete()
configfs: call fsnotify_rmdir() hook
debugfs: call fsnotify_{unlink,rmdir}() hooks
debugfs: simplify __debugfs_remove_file()
devpts: call fsnotify_unlink() hook
tracefs: call fsnotify_{unlink,rmdir}() hooks
rpc_pipefs: call fsnotify_{unlink,rmdir}() hooks
btrfs: call fsnotify_rmdir() hook
fsnotify: add empty fsnotify_{unlink,rmdir}() hooks
fanotify: Disallow permission events for proc filesystem
|
|
wbc_account_io() does a very specific job - try to see which cgroup is
actually dirtying an inode and transfer its ownership to the majority
dirtier if needed. The name is too generic and confusing. Let's
rename it to something more specific.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently if the allocation of roots or tmp_ulist fails the error handling
does not free up the allocation of path causing a memory leak. Fix this and
other similar leaks by moving the call of btrfs_free_path from label out
to label out_free_ulist.
Kudos to David Sterba for spotting the issue in my original fix and suggesting
the correct way to fix the leak and Anand Jain for spotting a double free
issue.
Addresses-Coverity: ("Resource leak")
Fixes: 5911c8fe05c5 ("btrfs: fiemap: preallocate ulists for btrfs_check_shared")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is just two functions, put it in root-tree.c since it involves root
items.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have code for data and metadata reservations for delalloc. There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file. inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move this into transaction.c with the rest of the transaction related
code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These belong with the delayed refs related code, not in extent-tree.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Simplification. No point passing the tree variable when it can be
evaluated from inode. The tests now use the io_tree from btrfs_inode as
opposed to creating one.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These helpers belong in block-rsv.c
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This moves everything out of extent-tree.c to block-rsv.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
block_rsv_release_bytes() is the internal to the block_rsv code, and
shouldn't be called directly by anything else. Switch all users to the
exported helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself. Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around. Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is used in a few places, we need to make sure it's exported so we
can move it around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Prep work for separating out all of the block_rsv related code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need an if-else-if chain where we can use a simple OR since
both conditions are performing the same action. The short-circuit for OR
will ensure that if the first condition is true, can_overcommit() is not
called.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've moved all of the users to space-info.c, unexport it and
name it back to can_overcommit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This moves all of the metadata reservation code into space-info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We'll need this exported so we can use it in all the various was we need
to use it. This is prep work to move reserve_metadata_bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are going to need this to move the metadata reservation stuff to
space_info.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we've moved all the pre-requisite stuff, move these two
functions.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Also rename it to btrfs_space_info_update_* so it's clear what we're
updating.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is the first piece of moving the space reservation code to
space-info.c
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These are the basic init and lookup functions and some helper functions,
fairly straightforward before the bad stuff starts.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Prep work for consolidating all of the space_info code into one file.
We need to export these so multiple files can use them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Really we just need the enum, but as we break more things up it'll help
to have this external to extent-tree.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Minimum stripe count matches the minimum devices required for a given
profile. The open coded assignments match the raid_attr table.
What's changed here is the meaning for RAID5/6. Previously their
min_stripes would be 1, while newly it's devs_min. This however shold be
the same as before because it's not possible to create filesystem on
fewer devices than the raid_attr table allows.
There's no adjustment regarding the parity stripes (like
calc_data_stripes does), because we're interested in overall space that
would fit on the devices.
Missing devices make no difference for the whole calculation, we have
the size stored in the structures.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_calc_avail_data_space
Special case for DUP can be replaced by lookup to the attribute table,
where the dev_stripes is the right coefficient.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A few more instances whre we don't need to specify the values as long as
they are the same that enum assigns automatically. All of the enums are
in-memory only and nothing relies on the exact values.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Print the error messages using the helpers that also print the
filesystem identification.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have been seeing issues in production where a cleaner script will end
up unlinking a bunch of files that have pending iputs. This means they
will get their final iput's run at btrfs-cleaner time and thus are not
throttled, which impacts the workload.
Since we are unlinking these files we can just drop the delayed iput at
unlink time. We are already holding a reference to the inode so this
will not be the final iput and thus is completely safe to do at this
point. Doing this means we are more likely to be doing the final iput
at unlink time, and thus will get the IO charged to the caller and get
throttled appropriately without affecting the main workload.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
