summaryrefslogtreecommitdiff
path: root/fs/btrfs/sysfs.c
AgeCommit message (Collapse)Author
2017-09-14Merge branch 'work.mount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mount flag updates from Al Viro: "Another chunk of fmount preparations from dhowells; only trivial conflicts for that part. It separates MS_... bits (very grotty mount(2) ABI) from the struct super_block ->s_flags (kernel-internal, only a small subset of MS_... stuff). This does *not* convert the filesystems to new constants; only the infrastructure is done here. The next step in that series is where the conflicts would be; that's the conversion of filesystems. It's purely mechanical and it's better done after the merge, so if you could run something like list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$') sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \ -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \ -e 's/\<MS_NODEV\>/SB_NODEV/g' \ -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \ -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \ -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \ -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \ -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \ -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \ -e 's/\<MS_SILENT\>/SB_SILENT/g' \ -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \ -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \ -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \ -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \ $list and commit it with something along the lines of 'convert filesystems away from use of MS_... constants' as commit message, it would save a quite a bit of headache next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Differentiate mount flags (MS_*) from internal superblock flags VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb) vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-08-15btrfs: Add zstd supportNick Terrell
Add zstd compression and decompression support to BtrFS. zstd at its fastest level compresses almost as well as zlib, while offering much faster compression and decompression, approaching lzo speeds. I benchmarked btrfs with zstd compression against no compression, lzo compression, and zlib compression. I benchmarked two scenarios. Copying a set of files to btrfs, and then reading the files. Copying a tarball to btrfs, extracting it to btrfs, and then reading the extracted files. After every operation, I call `sync` and include the sync time. Between every pair of operations I unmount and remount the filesystem to avoid caching. The benchmark files can be found in the upstream zstd source repository under `contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}` [1] [2]. I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor, 16 GB of RAM, and a SSD. The first compression benchmark is copying 10 copies of the unzipped Silesia corpus [3] into a BtrFS filesystem mounted with `-o compress-force=Method`. The decompression benchmark times how long it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is measured by comparing the output of `df` and `du`. See the benchmark file [1] for details. I benchmarked multiple zstd compression levels, although the patch uses zstd level 1. | Method | Ratio | Compression MB/s | Decompression speed | |---------|-------|------------------|---------------------| | None | 0.99 | 504 | 686 | | lzo | 1.66 | 398 | 442 | | zlib | 2.58 | 65 | 241 | | zstd 1 | 2.57 | 260 | 383 | | zstd 3 | 2.71 | 174 | 408 | | zstd 6 | 2.87 | 70 | 398 | | zstd 9 | 2.92 | 43 | 406 | | zstd 12 | 2.93 | 21 | 408 | | zstd 15 | 3.01 | 11 | 354 | The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it measures the compression ratio, extracts the tar, and deletes the tar. Then it measures the compression ratio again, and `tar`s the extracted files into `/dev/null`. See the benchmark file [2] for details. | Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) | |--------|-----------|---------------|----------|------------|----------| | None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 | | lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 | | zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 | | zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 | [1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh [2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh [3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia [4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz zstd source repository: https://github.com/facebook/zstd Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-07-17VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)David Howells
Firstly by applying the following with coccinelle's spatch: @@ expression SB; @@ -SB->s_flags & MS_RDONLY +sb_rdonly(SB) to effect the conversion to sb_rdonly(sb), then by applying: @@ expression A, SB; @@ ( -(!sb_rdonly(SB)) && A +!sb_rdonly(SB) && A | -A != (sb_rdonly(SB)) +A != sb_rdonly(SB) | -A == (sb_rdonly(SB)) +A == sb_rdonly(SB) | -!(sb_rdonly(SB)) +!sb_rdonly(SB) | -A && (sb_rdonly(SB)) +A && sb_rdonly(SB) | -A || (sb_rdonly(SB)) +A || sb_rdonly(SB) | -(sb_rdonly(SB)) != A +sb_rdonly(SB) != A | -(sb_rdonly(SB)) == A +sb_rdonly(SB) == A | -(sb_rdonly(SB)) && A +sb_rdonly(SB) && A | -(sb_rdonly(SB)) || A +sb_rdonly(SB) || A ) @@ expression A, B, SB; @@ ( -(sb_rdonly(SB)) ? 1 : 0 +sb_rdonly(SB) | -(sb_rdonly(SB)) ? A : B +sb_rdonly(SB) ? A : B ) to remove left over excess bracketage and finally by applying: @@ expression A, SB; @@ ( -(A & MS_RDONLY) != sb_rdonly(SB) +(bool)(A & MS_RDONLY) != sb_rdonly(SB) | -(A & MS_RDONLY) == sb_rdonly(SB) +(bool)(A & MS_RDONLY) == sb_rdonly(SB) ) to make comparisons against the result of sb_rdonly() (which is a bool) work correctly. Signed-off-by: David Howells <dhowells@redhat.com>
2017-06-19btrfs: Add quota_override knob into sysfsSargun Dhillon
This patch adds the read-write attribute quota_override into sysfs. Any process which has CAP_SYS_RESOURCE can set this flag to on, and once it is set to true, processes with CAP_SYS_RESOURCE can exceed the quota. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: David Sterba <dsterba@suse.com> [ minor changelog edits ] Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: convert printk(KERN_* to use pr_* callsJeff Mahoney
This patch converts printk(KERN_* style messages to use the pr_* versions. One side effect is that anything that was KERN_DEBUG is now automatically a dynamic debug message. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: unsplit printed stringsJeff Mahoney
CodingStyle chapter 2: "[...] never break user-visible strings such as printk messages, because that breaks the ability to grep for them." This patch unsplits user-visible strings. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: create example debugfs file only in debugging buildDavid Sterba
Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-26btrfs: fix perms on demonstration debugfs interfaceEric Sandeen
btrfs provides a helpful demonstration of how to export a global variable via debugfs; however, it is unique among other debugfs files in that it is world-writable, which causes some concern to people who are not familiar with its purpose. Fix it so that it is only user-writable. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-07-26btrfs: add missing bytes_readonly attribute file in sysfsWang Xiaoguang
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: sysfs: protect reading label by lockDavid Sterba
If the label setting ioctl races with sysfs label handler, we could get mixed result in the output, part old part new. We should either get the old or new label. The chances to hit this race are low. Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: add check to sysfs handler of labelDavid Sterba
Add a sanity check for the fs_info as we will dereference it, similar to what the 'store features' handler does. Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06btrfs: add read-only check to sysfs handler of featuresDavid Sterba
We don't want to trigger the change on a read-only filesystem, similar to what the label handler does. Signed-off-by: David Sterba <dsterba@suse.cz>
2016-01-27btrfs: sysfs: check initialization state before updating featuresDavid Sterba
If the mount phase is not finished, we can't update the sysfs files. Reported-by: Chris Mason <clm@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-21btrfs: sysfs: introduce helper for syncing bits with sysfs filesDavid Sterba
The files under /sys/fs/UUID/features get out of sync with the actual incompat bits set for the filesystem if they change after mount. We're going to sync them and need a helper to do that. Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-21btrfs: sysfs: add free-space-tree bit attributeDavid Sterba
The incompat bit representing the newly added free space tree feature is missing. Right now it will be listed only among features supported by the module, not per-fs. Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29Btrfs: rename super_kobj to fsid_kobjAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29Btrfs: rename btrfs_kobj_rm_device to btrfs_sysfs_rm_device_linkAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29Btrfs: rename btrfs_kobj_add_device to btrfs_sysfs_add_device_linkAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29Btrfs: rename btrfs_sysfs_remove_one to btrfs_sysfs_remove_mountedAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2015-09-29Btrfs: rename btrfs_sysfs_add_one to btrfs_sysfs_add_mountedAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2015-06-22Btrfs: Check if kobject is initialized before putAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: add support to add parent for fsidAnand Jain
To support seed sysfs layout and represent seed fsid under the sprout we need the facility to create fsid under the specified parent. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: separate kobject and attribute creationAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: btrfs_sysfs_remove_fsid() make it non staticAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: make btrfs_sysfs_add_fsid() non staticAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs btrfs_kobj_rm_device() pass fs_devices instead of fs_infoAnand Jain
since btrfs_kobj_rm_device() does nothing with fs_info Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs btrfs_kobj_add_device() pass fs_devices instead of fs_infoAnand Jain
btrfs_kobj_add_device() does not need fs_info any more. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: provide framework to remove all fsid sysfs kobjectAnand Jain
Just a helper function to clean up the sysfs fsid kobjects. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: add pointer to access fs_info from fs_devicesAnand Jain
adds fs_info pointer with struct btrfs_fs_devices. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: move super_kobj and device_dir_kobj from fs_info to ↵Anand Jain
btrfs_fs_devices This patch will provide a framework and help to create attributes from the structure btrfs_fs_devices which are available even before fs_info is created. So by moving the parent kobject super_kobj from fs_info to btrfs_fs_devices, it will help to create attributes from the btrfs_fs_devices as well. Patches on top of this patch now will be able to create the sys/fs/btrfs/fsid kobject and attributes from btrfs_fs_devices when devices are scanned and registered to the kernel. Just to note, this does not change any of the existing btrfs sysfs external kobject names and its attributes and not even the life cycle of them. Changes are internal only. And to ensure the same, this path has been tested with various device operations and, checking and comparing the sysfs kobjects and attributes with sysfs kobject and attributes with out this patch, and they remain same. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: separate device kobject and its attribute creationAnand Jain
Separate device kobject and its attribute creation so that device kobject can be created from the device discovery thread. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: let default_attrs be separate from the ksetAnand Jain
As of now btrfs_attrs are provided using the default_attrs through the kset. Separate them and create the default_attrs using the sysfs_create_files instead. By doing this we will have the flexibility that device discovery thread could create fsid kobject. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: introduce function btrfs_sysfs_add_fsid() to create sysfs fsidAnand Jain
We need it in a seperate function so that it can be called from the device discovery thread as well. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: rename __btrfs_sysfs_remove_one to btrfs_sysfs_remove_fsidAnand Jain
Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: reorder the kobject creationsAnand Jain
As of now the order in which the kobjects are created at btrfs_sysfs_add_one() is.. fsid features unknown features (dynamic features) devices. Since we would move fsid and device kobject to fs_devices from fs_info structure, this patch will reorder in which the kobjects are created as below. fsid devices features unknown features (dynamic features) And hence the btrfs_sysfs_remove_one() will follow the same in reverse order. and the device kobject destroy now can be moved into the function __btrfs_sysfs_remove_one() Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfc: sysfs: fix, check if device_dir_kobj is init before destroyAnand Jain
Since the failure code in the btrfs_sysfs_add_one() can call btrfs_sysfs_remove_one() even before device_dir_kobj has been created we need to check if its null. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: fix, kobject pointer clean up needed after kobject releaseAnand Jain
The sysfs clean up self test like in the below code fails, since fs_info->device_dir_kobject still points to its stale kobject. Reseting this pointer will help to fix this. open_ctree() { ret = btrfs_sysfs_add_one(fs_info); :: + btrfs_sysfs_remove_one(fs_info); + ret = btrfs_sysfs_add_one(fs_info); + if (ret) { + pr_err("BTRFS: failed to init sysfs interface: %d\n", ret); + goto fail_block_groups; + } Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: fix, undo sysfs device linksAnand Jain
Theoritically need to remove the device links attributes, but since its entire device kobject was removed, so there wasn't any issue of about it. Just do it nicely. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-05-27Btrfs: sysfs: fix, btrfs_release_super_kobj() should to clean up the kobject ↵Anand Jain
data The following test case fails indicating that, thread tried to init an initialized object. kernel: [232104.016513] kobject (ffff880006c1c980): tried to init an initialized object, something is seriously wrong. btrfs_sysfs_remove_one() self test code: open_tree() { :: ret = btrfs_sysfs_add_one(fs_info); if (ret) { pr_err("BTRFS: failed to init sysfs interface: %d\n", ret); goto fail_block_groups; } + btrfs_sysfs_remove_one(fs_info); + ret = btrfs_sysfs_add_one(fs_info); + if (ret) { + pr_err("BTRFS: failed to init sysfs interface: %d\n", ret); + goto fail_block_groups; + } cleaning up the unregistered kobject fixes this. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.cz>
2015-02-16btrfs: constify structs with op functions or static definitionsDavid Sterba
There are some op tables that can be easily made const, similarly the sysfs feature and raid tables. This is motivated by PaX CONSTIFY plugin. Signed-off-by: David Sterba <dsterba@suse.cz>
2015-02-02Btrfs: add missing cleanup on sysfs init failureFilipe Manana
If we failed during initialization of sysfs, we weren't unregistering the top level btrfs sysfs entry nor the debugfs stuff. Not unregistering the top level sysfs entry makes future attempts to reload the btrfs module impossible and the following is reported in dmesg: [ 2246.451296] WARNING: CPU: 3 PID: 10999 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x91/0xb0() [ 2246.451298] sysfs: cannot create duplicate filename '/fs/btrfs' [ 2246.451298] Modules linked in: btrfs(+) raid6_pq xor bnep rfcomm bluetooth binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc parport_pc parport psmouse serio_raw pcspkr evbug i2c_piix4 e1000 floppy [last unloaded: btrfs] [ 2246.451310] CPU: 3 PID: 10999 Comm: modprobe Tainted: G W 3.13.0-fdm-btrfs-next-24+ #7 [ 2246.451311] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 2246.451312] 0000000000000009 ffff8800d353fa08 ffffffff816f1da6 0000000000000410 [ 2246.451314] ffff8800d353fa58 ffff8800d353fa48 ffffffff8104a32c ffff88020821a290 [ 2246.451316] ffff88020821a290 ffff88020821a290 ffff8802148f0000 ffff8800d353fb80 [ 2246.451318] Call Trace: [ 2246.451322] [<ffffffff816f1da6>] dump_stack+0x4e/0x68 [ 2246.451324] [<ffffffff8104a32c>] warn_slowpath_common+0x8c/0xc0 [ 2246.451325] [<ffffffff8104a416>] warn_slowpath_fmt+0x46/0x50 [ 2246.451328] [<ffffffff81367dc5>] ? strlcat+0x65/0x90 (....) This fixes the following change: btrfs: add simple debugfs interface commit 1bae30982bc86ab66d61ccb6e22792593b45d44d Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-11-12btrfs: move commit out of sysfs when changing labelDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.cz>
2014-11-12btrfs: move commit out of sysfs when changing featuresDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.cz>
2014-09-17btrfs: sysfs label interface should check for read only FSAnand Jain
Not sure how this escaped many eyes so far Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17btrfs: code optimize: BTRFS_ATTR_RW could set the modeAnand Jain
BTRFS_ATTR_RW could set the mode and be inline with BTRFS_ATTR Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17btrfs: code optimize: BTRFS_ATTR could handle the modeAnand Jain
All that uses BTRFS_ATTR want mode to be set at 0444 so just do it at the define. And few spacing alignments. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17btrfs: use BTRFS_ATTR instead of btrfs_no_store()Anand Jain
we have BTRFS_ATTR define to create sysfs RO file, use that. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17btrfs: label should not contain return charSatoru Takeuchi
Rediffed remaining parts of original patch from Anand Jain. This makes sure to avoid trailing newlines in the btrfs label output reproducer.sh: =============================================================================== TEST_DEV=/dev/vdb TEST_DIR=/home/sat/mnt umount /home/sat/mnt mkfs.btrfs -f $TEST_DEV UUID=$(btrfs fi show $TEST_DEV | head -1 | sed -e 's/.*uuid: \([-0-9a-z]*\)$/\1/') mount $TEST_DEV $TEST_DIR LABELFILE=/sys/fs/btrfs/$UUID/label echo "Test for empty label..." >&2 LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')" RET=0 if [ $LINES -eq 0 ] ; then echo '[PASS] Trailing \n is removed correctly.' >&2 else echo '[FAIL] Trailing \n still exists.' >&2 RET=1 fi echo "Test for non-empty label..." >&2 echo testlabel >$LABELFILE LINES="$(cat $LABELFILE | wc -l | awk '{print $1}')" if [ $LINES -eq 1 ] ; then echo '[PASS] Trailing \n is removed correctly.' >&2 else echo '[FAIL] Trailing \n still exists.' >&2 RET=1 fi exit $RET =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-08-21Btrfs: fix regression of btrfs device replaceLiu Bo
Commit 49c6f736f34f901117c20960ebd7d5e60f12fcac( btrfs: dev replace should replace the sysfs entry) added the missing sysfs entry in the process of device replace, but didn't take missing devices into account, so now we have BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffffa0268551>] btrfs_kobj_rm_device+0x21/0x40 [btrfs] ... To reproduce it, 1. mkfs.btrfs -f disk1 disk2 2. mkfs.ext4 disk1 3. mount disk2 /mnt -odegraded 4. btrfs replace start -B 1 disk3 /mnt -------------------------- This fixes the problem. Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-06-28btrfs: dev add should add its sysfs entryAnand Jain
we would need the device links to be created, when device is added. Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:41:33 +0000