summaryrefslogtreecommitdiff
path: root/fs/Kconfig.binfmt
AgeCommit message (Collapse)Author
2015-02-17fs/binfmt_som: Drop kernel support for HP-UX SOM binariesHelge Deller
The parisc arch has been the only user of HP-UX SOM binaries. Support for HP-UX executables was never finished and since we now drop support for the HP-UX compat layer anyway, it does not makes sense to keep the BINFMT_SOM support. Cc: linux-fsdevel@vger.kernel.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2014-11-24binfmt_elf: allow arch code to examine PT_LOPROC ... PT_HIPROC headersPaul Burton
MIPS is introducing new variants of its O32 ABI which differ in their handling of floating point, in order to enable a gradual transition towards a world where mips32 binaries can take advantage of new hardware features only available when configured for certain FP modes. In order to do this ELF binaries are being augmented with a new section that indicates, amongst other things, the FP mode requirements of the binary. The presence & location of such a section is indicated by a program header in the PT_LOPROC ... PT_HIPROC range. In order to allow the MIPS architecture code to examine the program header & section in question, pass all program headers in this range to an architecture-specific arch_elf_pt_proc function. This function may return an error if the header is deemed invalid or unsuitable for the system, in which case that error will be returned from load_elf_binary and upwards through the execve syscall. A means is required for the architecture code to make a decision once it is known that all such headers have been seen, but before it is too late to return from an execve syscall. For this purpose the arch_check_elf function is added, and called once, after all PT_LOPROC to PT_HIPROC headers have been passed to arch_elf_pt_proc but before the code which invoked execve has been lost. This enables the architecture code to make a decision based upon all the headers present in an ELF binary and its interpreter, as is required to forbid conflicting FP ABI requirements between an ELF & its interpreter. In order to allow data to be stored throughout the calls to the above functions, struct arch_elf_state is introduced. Finally a variant of the SET_PERSONALITY macro is introduced which accepts a pointer to the struct arch_elf_state, allowing it to act based upon state observed from the architecture specific program headers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-30fs: make binfmt support for #! scripts modular and removableJosh Triplett
Add a new configuration option CONFIG_BINFMT_SCRIPT to configure support for interpreted scripts starting with "#!"; allow compiling out that support, or building it as a module. Embedded systems running exclusively compiled binaries could leave this support out, and systems that don't need scripts before mounting the root filesystem can build this as a module. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06coredump: make core dump functionality optionalAlex Kelly
Adds an expert Kconfig option, CONFIG_COREDUMP, which allows disabling of core dump. This saves approximately 2.6k in the compiled kernel, and complements CONFIG_ELF_CORE, which now depends on it. CONFIG_COREDUMP also disables coredump-related sysctls, except for suid_dumpable and related functions, which are necessary for ptrace. [akpm@linux-foundation.org: fix binfmt_aout.c build] Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-15C6X: add support to build with BINFMT_ELF_FDPICMark Salter
C6x userspace supports a shared library mechanism called DSBT for systems with no MMU. DSBT is similar to FDPIC in allowing shared text segments and private copies of data segments without an MMU. Both methods access data using a base register and offset. With FDPIC, the caller of an external function sets up the base register for the callee. With DSBT, the called function sets up its own base register. Other details differ but both userspaces need the same thing from the kernel loader: a map of where each ELF segment was loaded. The FDPIC loader already provides this, so DSBT just uses it. This patch enables BINFMT_ELF_FDPIC by default for C6X and provides the necessary architecture hooks for the generic loader. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-01-10fs: binfmt_elf: create Kconfig variable for PIE randomizationDavid Daney
Randomization of PIE load address is hard coded in binfmt_elf.c for X86 and ARM. Create a new Kconfig variable (CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead. Thus architecture specific policy is pushed out of the generic binfmt_elf.c and into the architecture Kconfig files. X86 and ARM Kconfigs are modified to select the new variable so there is no change in behavior. A follow on patch will select it for MIPS too. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27coredump: default CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yRoland McGrath
The userland ELF tools have been coping with partial-segments core files for a few years now. Multiple distro builds are now setting this option. It behooves everyone who ever deals with core files to have more info dumped in there, especially as more and more people's compilers are producing build IDs. Make it the default. Anyone using older tools confused by these core files can configure this option off, or just change /proc/PID/coredump_filter after boot. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09CORE_DUMP_DEFAULT_ELF_HEADERS depends on ELF_COREDavid Brownell
Kernels that don't support ELF coredumps at all surely can't be supporting new partial-segment flavored ELF coredumps ... don't make folk answer Kconfig questions about that flavor. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20add CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERSRoland McGrath
This adds a kconfig option to change the /proc/PID/coredump_filter default. Fedora has been carrying a trivial patch to change the hard-wired value for this default, since Fedora 8. The default default can't change safely because there are old GDB versions out there (all before 6.7) that are confused by the core dump files created by the MMF_DUMP_ELF_HEADERS setting. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kawai Hidehiro <hidehiro.kawai.ez@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16COMPAT_BINFMT_ELF definition tweakAlexey Dobriyan
Don't repeat BINFMT_ELF definition, simply multiply COMPAT and BINFMT_ELF. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-06Introduce HAVE_AOUT symbol to remove hard-coded arch list for BINFMT_AOUTDavid Woodhouse
HAVE_AOUT doesn't quite do the same thing as the recently removed ARCH_SUPPORTS_AOUT config option. That was set even on platforms where binfmt_aout isn't supported, although it's not entirely clear why. So it's best just to introduce a new symbol, handled consistently with other similar HAVE_xxx symbols; with a simple 'select' in the arch Kconfig. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06Remove redundant CONFIG_ARCH_SUPPORTS_AOUTDavid Woodhouse
We don't need this any more; arguably we never really did. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-28sh: Initial ELF FDPIC support.Paul Mundt
This adds initial support for ELF FDPIC on MMU-less SH, as per version 0.2 of the ABI definition at: http://www.codesourcery.com/public/docs/sh-fdpic/sh-fdpic-abi.txt Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-06frv: don't offer BINFMT_FLATAdrian Bunk
Fix the following compile error: CC fs/binfmt_flat.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:36: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/flat.h:14:22: error: asm/flat.h: No such file or directory /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'create_flat_tables': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:124: error: implicit declaration of function 'flat_stack_align' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:125: error: implicit declaration of function 'flat_argvp_envp_on_stack' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'calc_reloc': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:347: error: implicit declaration of function 'flat_reloc_valid' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'load_flat_file': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:479: error: implicit declaration of function 'flat_old_ram_flag' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:755: error: implicit declaration of function 'flat_set_persistent' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:757: error: implicit declaration of function 'flat_get_relocate_addr' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:765: error: implicit declaration of function 'flat_get_addr_from_rp' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:781: error: implicit declaration of function 'flat_put_addr_at_rp' Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Tested-by: David Howells <dhowells@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29make BINFMT_FLAT a boolAdrian Bunk
I have not yet seen anyone saying he has a reasonable use case for using BINFMT_FLAT modular on his embedded device. Considering that fs/binfmt_flat.c even lacks a MODULE_LICENSE() I really doubt there is any, and this patch therefore makes BINFMT_FLAT a bool. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Bryan Wu <cooloney.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21[SPARC]: Remove SunOS and Solaris binary support.David S. Miller
As per Documentation/feature-removal-schedule.txt Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-08aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUTDavid Howells
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set. Not all architectures support the A.OUT binfmt, so the ELF binfmt should not be permitted to go looking for A.OUT libraries to load in such a case. Not only that, but under such conditions A.OUT core dumps are not produced either. To make this work, this patch also does the following: (1) Makes the existence of the contents of linux/a.out.h contingent on CONFIG_ARCH_SUPPORTS_AOUT. (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT core dumping code. (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This is then included only where needed. This means that this bit of arch code will be stored in the appropriate A.OUT binfmt module rather than the core kernel. (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not needed) and FRV. This patch depends on the previous patch to move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. [jdike@addtoit.com: uml: re-remove accidentally restored code] Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30x86: compat_binfmt_elf KconfigRoland McGrath
This adds Kconfig and Makefile bits to build fs/compat_binfmt_elf.c, just added. Each arch that wants to use this file needs to add a "select COMPAT_BINFMT_ELF" line in its Kconfig bits that enable COMPAT. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-05-21fs: Kill sh dependency for binfmt_flat.Paul Mundt
Not really sure where this bogosity came from, but there's certainly nothing special about sh that lets us use flat files with the MMU on. Kill the dependency, and leave it as !MMU, like it is for all of the other nommu-wielding ports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07blackfin architectureBryan Wu
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-01-08[PATCH] frv: suppress configuration of certain features for FRVDavid Howells
Suppress configuration of certain features for the FRV arch as they can't be built for FRV at the moment: (*) RTC (*) HISAX_* (*) PARPORT_PC (*) VGA_CONSOLE (*) BINFMT_ELF Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] CONFIG_IA32Brian Gerst
Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!