summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-11-25serial: samsung: fix style problemsRobert Baldyga
Split lines longer than 80 chars and remove unnecessary whitespaces. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: samsung: wait for transfer completion before clock disableRobert Baldyga
This patch adds waiting until transmit buffer and shifter will be empty before clock disabling. Without this fix it's possible to have clock disabled while data was not transmited yet, which causes unproper state of TX line and problems in following data transfers. Cc: <stable@vger.kernel.org> # v2.6.26+ Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: icom: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: tegra: clean up tty-flag assignmentsJohan Hovold
The tty break and error flags are not bit masks so do not to use bitwise OR when assigning them. Note that there is no functional change due to the if-else construct and flag having been initialised to zero (TTY_NORMAL). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: Fix io address assign flow with Fintek PCI-to-UART ProductPeter Hung
The original driver fixed the io address with 0xe000+idx*8, but real io address assigned from BIOS is dynamically from read PCI configure space 0x24, 0x20, 0x1c. The Fintek F81504/F81508/F81512 maybe malfunction without this patch and malfunction surely when more then 1 PCI card. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: mxs-auart: fix tx_empty against shift registerJanusz Uzycki
tx_empty() should test whether both the transmitter fifo and shifter for the port is empty, ie. the whole last char was transmitted. The shift register is empty if AUART_STAT_BUSY is cleared. The patch fixes the function against the shift register. According to i.MX23 and i.MX28 Reference Manual: AUART_STAT_TXFE: TX FIFO or transmit holding register is empty. AUART_STAT_BUSY: AUART still transmits bits. The BUSY signal goes HIGH as soon as the data is written to the transmit FIFO (that is, the FIFO is non-empty) and remains asserted HIGH while data is being transmitted. BUSY is negated only when the transmit FIFO is empty, and the last character has been transmitted from the shift register, including the stop bits. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: mxs-auart: fix gpio change detection on interruptJanusz Uzycki
mxs_auart_modem_status() did't detect gpio's state change because s->mctrl_prev was modified before by mctrl_gpio_get(). The patch introduces mctrl_temp variable to fix the bug. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: mxs-auart: Fix mxs_auart_set_ldisc()Fabio Estevam
Commit 732a84a037a4 ("serial: core: Pass termios to set_ldisc() notifications") changed the set_ldisc prototype. At the time of this commit the mxs_auart driver did not implement set_ldisc, so that's why it has not been converted. Adapt also mxs_auart_set_ldisc() so that the following build warning can be fixed: drivers/tty/serial/mxs-auart.c:962:2: warning: initialization from incompatible pointer type .set_ldisc = mxs_auart_set_ldisc, ^ drivers/tty/serial/mxs-auart.c:962:2: warning: (near initialization for 'mxs_auart_ops.set_ldisc') Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: 8250_dw: Use 64-bit access for OCTEON.David Daney
Although the existing code appears to work on most hardware, the hardware designers tell us that 8-bit access to the registers is not guaranteed to be reliable. Also the OCTEON simulation environments prohibit 8-bit accesses. For these reasons, we use __raw_readq/__raw_writeq for OCTEON. This code is protected with #ifdef CONFIG_64BIT so it still builds under configurations lacking readq/writeq. We can get rid of the #ifdef __BIG_ENDIAN, as under 64-bit accesses, OCTEON is byte order invariant. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: imx: Fix warning when building 'allmodconfig'Fabio Estevam
When CONFIG_SERIAL_IMX_CONSOLE=n and CONFIG_CONSOLE_POLL=y we get the following build warning: drivers/tty/serial/imx.c:306:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function] drivers/tty/serial/imx.c:315:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function] imx_port_ucrs_save/restore are only used under CONFIG_SERIAL_IMX_CONSOLE, so their definitions should be also be protected only by CONFIG_SERIAL_IMX_CONSOLE. This was detected when building 'allmodconfig'. Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tty: serial: omap_serial: line is unsigned, don't check < 0Sebastian Andrzej Siewior
Dan Carpenter reported: |drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe() |warn: unsigned 'up.port.line' is never less than zero. |1025 if (up.port.line < 0) { Since of_alias_get_id() and pdev->id can get negative I check for the error via ret variable. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tty: serial: 8250: omap: line is unsigned, don't check < 0Sebastian Andrzej Siewior
Dan Carpenter reported: |drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe() |warn: unsigned 'up.port.line' is never less than zero. |1025 if (up.port.line < 0) { I (wrongly) assumed that line is an int and compiler didn't complain nor did sparse. Since of_alias_get_id() and pdev->id can get negative I check for the error via ret variable. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tty: serial: men_z135_uart: Add terminating entry for men_z135_idsAxel Lin
The mcb_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: sirf: add a new uart type supportQipan Li
in CSR A7DA SoC, uart6 located at BT module and it need multiple clock sources, so for "sirf,marco-bt-uart" compatible uarts, drivers take 3 clock sources and enable them. this patch also replaces clk_get by devm_clk_get function and fix DT binding document in which we missed to fix when we added marco platform in commit 909102db44f "serial: sirf: add support for Marco chip". Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25tty: pr_warning->pr_warn and logging neateningJoe Perches
Convert the pr_warning to the more common pr_warn. Other miscellanea: o Convert unusual PR_FMT define and uses to pr_fmt o Remove unnecessary OOM message o Fix grammar in an error message o Convert a pr_warning with a KERN_ERR to pr_err Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: jsm: Fix unnecessary space before function ptr argumentsKonrad Zapalowicz
This commit deals with the checkpatch warning "Unnecessary space before function pointer arguments". Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: jsm: Replace magic value with the proper defineKonrad Zapalowicz
The changed function flushes the tx UART and the '4' corresponds to the UART_FCR_CLEAR_XMIT value. This commit replaces the magic number with this define. Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: jsm: Fix the alignment of the switch satementKonrad Zapalowicz
This commit fixes the alignment of the 'case's i the switch statement. Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: jsm: Remove unnecessary if statementKonrad Zapalowicz
The flow of {neo,cls}_param() shows that at this stage the baud rate has a non-zero value. This fact makes the if clausule obsolete and acknowledges it's removal. Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: jsm: Remove unnecessary parameter from clear_break()Konrad Zapalowicz
The 'force' parameter to the {cls,neo}_send_break() function has been removed because it has not been used. The client to this API (the tty code) always called this function with only one value. Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25serial: sh-sci: Change checking for error rate of HSCIFNobuhiro Iwamatsu
This changes negative values of error rate to be checked, because these values are valid as error rate. And this changes in the process of adopting a value close to 0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24tty: serial: msm_serial: Don't require DT aliasesStephen Boyd
If there isn't a DT alias then of_alias_get_id() will return -ENODEV. This will cause the msm_serial driver to fail probe, when we want to keep the previous behavior where we generated a dynamic line number at probe time. Restore this behavior by generating a dynamic id if the line number is still negative after checking for an alias or in the non-DT case looking at the .id field of the platform device. Reported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-22vt: Fix build breakage when !CONFIG_VT_CONSOLEPeter Hurley
Commit 68952076e9226cc23ebce66d3fc2fdb8b6c04c30 ("vt: Remove vt_get_kmsg_redirect() from uapi header") fails to compile if !CONFIG_VT_CONSOLE. Move macro definition for vt_get_kmsg_redirect() up with file-scope function declarations. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-11Revert "serial: of-serial: fetch line number from DT"Greg Kroah-Hartman
This reverts commit 1bd8324535ec1ff44aef55c0e40b9e7d56b310fb. To quote Olof: This commit broke a whole lot of tegra boards in last night's -next here. In particular, I've been looking at tegra20-seaboard, which now doesn't boot with console any more. Breaking existing systems is bad. Reported-by: Olof Johansson <olof@lixom.net> Cc: Lucas Stach <dev@lynxeye.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-10Merge 3.18-rc4 into tty-next.Greg Kroah-Hartman
This resolves a merge issue with drivers/tty/serial/8250/8250_mtk.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-09Merge tag 'armsoc-for-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another quiet week: - a fix to silence edma probe error on non-supported platforms from Arnd - a fix to enable the PL clock for Parallella, to make mainline usable with the SDK. - a somewhat verbose fix for the PLL clock tree on VF610 - enabling of SD/MMC on one of the VF610-based boards (for testing) - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and now needs to be added to the defconfig instead - another maintainer added for bcm2835: Lee Jones" * tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: zynq: Enable PL clocks for Parallella dma: edma: move device registration to platform code ARM: dts: vf610: add SD node to cosmic dts MAINTAINERS: update bcm2835 entry ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree
2014-11-09Merge branch 'devicetree/merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bugfix from Grant Likely: "One buffer overflow bug that shouldn't be left around" * 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of: Fix overflow bug in string property parsing functions
2014-11-09Merge tag 'driver-core-3.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 tiny fixes for 3.18-rc4. One fixes up a long-stading race condition in the driver core for removing directories in /sys/devices/virtual/ and the other 2 fix up the wording of a new Kconfig option that was added in 3.18-rc1" * tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP sysfs: driver core: Fix glue dir race condition by gdp_mutex
2014-11-09Merge tag 'staging-3.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some staging/iio fixes for 3.18-rc4. Nothing major, just a few bugfixes of things that have been reported" * tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging:iio:ade7758: Remove "raw" from channel name staging:iio:ade7758: Fix check if channels are enabled in prenable staging:iio:ade7758: Fix NULL pointer deref when enabling buffer iio: as3935: allocate correct iio_device size io: accel: kxcjk-1013: Fix iio_event_spec direction iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
2014-11-09Merge tag 'tty-3.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some reported issues" * tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix pty master poll() after slave closes v2 serial: of-serial: fix uninitialized kmalloc variable tty/vt: don't set font mappings on vc not supporting this tty: serial: 8250_mtk: Fix quot calculation tty: Prevent "read/write wait queue active!" log flooding tty: Fix high cpu load if tty is unreleaseable serial: Fix divide-by-zero fault in uart_get_divisor()
2014-11-09Merge tag 'usb-3.18-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes for 3.18-rc4. Just a bunch of little fixes resolving reported issues and new device ids for existing drivers. Full details are in the shortlog" * tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: Update default usb-storage delay_use value in kernel-parameters.txt USB: cdc-acm: add quirk for control-line state requests phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() USB: cdc-acm: only raise DTR on transitions from B0 Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" usb: core: notify disconnection when core detects disconnect usb: core: need to call usb_phy_notify_connect after device setup uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models xhci: no switching back on non-ULT Haswell USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen USB: quirks: enable device-qualifier quirk for another Elan touchscreen MAINTAINERS: Remove duplicate entry for usbip driver usb: storage: fix build warnings !CONFIG_PM usb: Remove references to non-existent PLAT_S5P symbol uas: Add NO_ATA_1X for VIA VL711 devices xhci: Disable streams on Asmedia 1042 xhci controllers USB: HWA: fix a warning message uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model usb-storage: handle a skipped data phase ...
2014-11-08Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "One bigger cleanup (FSF address removal) and two bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address
2014-11-08Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two fixlets for the armada SoC interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: armada-370-xp: Fix MPIC interrupt handling irqchip: armada-370-xp: Fix MSI interrupt handling
2014-11-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds
Pull media fixes from Mauro Carvalho Chehab: "For: - some regression fixes at the Remote Controller core and imon driver - a build fix for certain randconfigs with ir-hix5hd2 - don't feed power to satellite system at ds3000 driver init It also contains some fixes for drivers added for Kernel 3.18: - some fixes at the new ISDB-S driver, and the corresponding bits to fix some descriptors for this Japanese TV standard at the DVB core - two warning cleanups for sp2 driver if PM is disabled - change the default mode for the new vivid driver" * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] sp2: sp2_init() can be static [media] dvb:tc90522: fix always-false expression [media] dvb-core: set default properties of ISDB-S [media] dvb:tc90522: fix stats report [media] vivid: default to single planar device instances [media] imon: fix other RC type protocol support [media] ir-hix5hd2 fix build warning [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding [media] rc-core: fix protocol_change regression in ir_raw_event_register
2014-11-07Merge tag 'regulator-v3.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "More changes than I'd like here, most of them for a single bug repeated in a bunch of drivers with data not being initialized correctly, plus a fix to lower the severity of a warning introduced in the last merge window which can legitimately go off so we don't want to alarm users excessively" * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mpa01: zero-initialize regulator match table array regulator: max8660: zero-initialize regulator match table array regulator: max77802: zero-initialize regulator match table regulator: max77686: zero-initialize regulator match table regulator: max1586: zero-initialize regulator match table array regulator: max77693: Fix use of uninitialized regulator config regulator: of: Lower the severity of the error with no container
2014-11-07Merge tag 'spi-v3.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi bugfixes from Mark Brown: "A couple of small driver fixes for v3.18, both quite problematic if you hit a use case that's affected" * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM spi: fsl-dspi: Fix CTAR selection
2014-11-07tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMPJohannes Berg
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tiny: reverse logic for DISABLE_DEV_COREDUMPAristeu Rozanski
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07i2c: core: Dispose OF IRQ mapping at client removal timeLaurent Pinchart
Clients instantiated from OF get an IRQ mapping created at device registration time. Dispose the mapping when the client is removed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2014-11-07i2c: at91: don't account as iowaitWolfram Sang
iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317 Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable@kernel.org
2014-11-07i2c: remove FSF addressWolfram Sang
We have a central copy of the GPL for that. Some addresses were already outdated. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-11-07serial: pl011: Add device tree support for RX DMA pollingAndrew Jackson
Add equivalent attributes to those provided in the platform data for use when RX DMA is enabled. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: pl011: Don't enable RX DMA if residue processing not supportedAndrew Jackson
If the DMA engine doesn't support residue processing then the RX DMA handling won't work terribly well if polling is enabled. So, disable RX DMA if residue handling isn't available. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: pl011: Set length of DMA transferAndrew Jackson
The DMA engines on some systems require that the dma_length is set when using scatter gather lists. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: pl011: Avoid assumptions about buffer size when refilling TX DMAAndrew Jackson
The existing code assumed that PL011_DMA_BUFFER_SIZE == UART_XMIT_SIZE, which may not always be the case. This allows for these two being different sizes and not copying too much data. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: pl011: Allocate TX DMA buffer from DMA capable memoryAndrew Jackson
Allocating with __GFP_DMA avoids the need for bounce buffers Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: fsl_lpuart: Remove unneeded registration messageFabio Estevam
There is no real value in displaying "serial: Freescale lpuart driver" in every boot. The uart_register_driver() can fail and even so the "serial: Freescale lpuart driver" will be displayed, which is not really helpful. This is particularly annoying when booting multi_v7_defconfig kernel on a SoC that is not a Vybrid/Layerscape and even though this message gets displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: fsl_lpuart: Remove unneeded check for 'res'Fabio Estevam
'res' will be automatically checked inside devm_ioremap_resource(), so there is no need to explicitly perform a NULL check. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07sysfs: driver core: Fix glue dir race condition by gdp_mutexYijing Wang
There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com> Cc: <stable@vger.kernel.org> #3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06drivers: serial: jsm: Remove FSF address from the file documentation/headerKonrad Zapalowicz
This commit removes the address of Free Software Foundation from each of the mentioned file in order to suppress the checkpatch warning. Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 05:16:38 +0000