| Age | Commit message (Collapse) | Author |
|---|
|
SoCs that contain MDP5 have a top level wrapper called MDSS that
manages locks, power and irq for the sub-blocks within it.
Irq for HDMI is also routed through the MDSS.
Shortly after the Hot Plug Detection (HPD) is enabled in HDMI,
HDMI interrupts are recieved by the MDSS interrupt handler.
However at this moment the HDMI irq is still not mapped to
the MDSS irq domain so the HDMI irq handler cannot be called
to process the interrupts.
This leads to a flood of HDMI interrupts on CPU 0.
If we are lucky to have the HDMI initialization running on a
different CPU, it will eventually map the HDMI irq to MDSS irq
domain, the next HDMI interrupt will be handled by the HDMI irq
handler, the interrupt flood will stop and we will recover.
If the HDMI initialization is running on CPU 0, then it cannot
complete and there is nothing to stop the interrupt flood on
CPU 0. The system is stuck.
Fix this by moving the HPD enablement after the HDMI irq is
mapped to the MDSS irq domain.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
While creating display and event threads per crtc, validate
them before setting their priorities.
changes in v2:
- use dev_warn (Abhinav Kumar)
changes in v3:
- fix compilation error
changes in v4:
- Remove Change-Id (Sean Paul)
- Keep logging within 80 char limit (Sean Paul)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.
Doesn't do much good to increment the buf ptr before assigning it.
Fixes: 78b8e5b847b4 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.
Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
This patch simply checks first to see if the target can support crash dump
capture before proceeding.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- mst: Don't try to validate ports while destroying them (Lyude)
- Revert: Don't try to validate ports while destroying them (Lyude)
- core: Don't set device to master unless set_master succeeds (Sergio)
- meson: Do vblank_on/off on enable/disable (Neil)
- meson: Use fast_io regmap option to avoid sleeping in irq ctx (Lyude)
- meson: Don't walk off the end of the OSD EOTF LUTs (Lyude)
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sergio Correia <sergio@correia.cc>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212936.GA21379@art_vandelay
|
|
into drm-fixes
Fixes for 4.20. Nothing major.
- DC DP MST fix
- GPUVM fix for huge page mapping
- RLC fix for vega20
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128195905.2897-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Just gvt-fixes-2018-11-26
""One to correct MOCS registers load on engine list, one for rpm lock
warning fix, and another for use-after-free fix for partial ggtt
list destroy. "
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128180648.GA17585@jlahtine-desk.ger.corp.intel.com
|
|
drm-fixes
R-Car DU v4.20 regression fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8134504.ZSXK7gKU4H@avalon
|
|
v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration
[airlied: fix two checkpatch warnings]
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
|
|
If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.
This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.
Fixes: 0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This reverts commit:
c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
ugh.
In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is
where the problems start.
For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.
[ 45.062001] ==================================================================
[ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53
[ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3
[ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[ 45.062641] Call Trace:
[ 45.062685] dump_stack+0xbd/0x15a
[ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b
[ 45.062801] ? printk+0x9f/0xc5
[ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 45.062909] ? ex_handler_refcount+0x146/0x180
[ 45.062970] print_address_description+0x71/0x239
[ 45.063036] ? ex_handler_refcount+0x146/0x180
[ 45.063095] kasan_report.cold.5+0x242/0x30b
[ 45.063155] __asan_report_store4_noabort+0x1c/0x20
[ 45.063313] ex_handler_refcount+0x146/0x180
[ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0
[ 45.063428] fixup_exception+0x98/0xd7
[ 45.063484] ? raw_notifier_call_chain+0x20/0x20
[ 45.063548] do_trap+0x6d/0x210
[ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063732] do_error_trap+0xc0/0x170
[ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063929] do_invalid_op+0x3b/0x50
[ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064103] invalid_op+0x14/0x20
[ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915]
[ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915]
[ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915]
[ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[ 45.066054] ? kasan_check_write+0x14/0x20
[ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915]
[ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915]
[ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915]
[ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm]
[ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm]
[ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[ 45.067249] ? kasan_check_read+0x11/0x20
[ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[ 45.067364] ? kasan_check_read+0x11/0x20
[ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[ 45.067508] ? kasan_check_write+0x14/0x20
[ 45.070360] ? mutex_unlock+0x22/0x40
[ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915]
[ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[ 45.095851] ? kasan_check_write+0x14/0x20
[ 45.098473] ? kasan_check_read+0x11/0x20
[ 45.101155] ? strscpy+0x17c/0x530
[ 45.103808] ? __switch_to_asm+0x34/0x70
[ 45.106456] ? syscall_return_via_sysret+0xf/0x7f
[ 45.109711] ? read_word_at_a_time+0x20/0x20
[ 45.113138] ? __switch_to_asm+0x40/0x70
[ 45.116529] ? __switch_to_asm+0x34/0x70
[ 45.119891] ? __switch_to_asm+0x40/0x70
[ 45.123224] ? __switch_to_asm+0x34/0x70
[ 45.126540] ? __switch_to_asm+0x34/0x70
[ 45.129824] process_one_work+0x88d/0x15d0
[ 45.133172] ? pool_mayday_timeout+0x850/0x850
[ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128
[ 45.139739] ? wake_q_add+0xb0/0xb0
[ 45.143010] ? check_preempt_wakeup+0x652/0x1050
[ 45.146304] ? worker_enter_idle+0x29e/0x740
[ 45.149589] ? __schedule+0x1ec0/0x1ec0
[ 45.152937] ? kasan_check_read+0x11/0x20
[ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130
[ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 45.162542] ? kasan_check_write+0x14/0x20
[ 45.165657] worker_thread+0x1a5/0x1470
[ 45.168725] ? set_load_weight+0x2e0/0x2e0
[ 45.171755] ? process_one_work+0x15d0/0x15d0
[ 45.174806] ? __switch_to_asm+0x34/0x70
[ 45.177645] ? __switch_to_asm+0x40/0x70
[ 45.180323] ? __switch_to_asm+0x34/0x70
[ 45.182936] ? __switch_to_asm+0x40/0x70
[ 45.185539] ? __switch_to_asm+0x34/0x70
[ 45.188100] ? __switch_to_asm+0x40/0x70
[ 45.190628] ? __schedule+0x7d4/0x1ec0
[ 45.193143] ? save_stack+0xa9/0xd0
[ 45.195632] ? kasan_check_write+0x10/0x20
[ 45.198162] ? kasan_kmalloc+0xc4/0xe0
[ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190
[ 45.203046] ? kthread+0x9f/0x3b0
[ 45.205470] ? ret_from_fork+0x35/0x40
[ 45.207876] ? unwind_next_frame+0x43/0x50
[ 45.210273] ? __save_stack_trace+0x82/0x100
[ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580
[ 45.215026] ? default_wake_function+0x35/0x50
[ 45.217399] ? kasan_check_read+0x11/0x20
[ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140
[ 45.222174] ? __lock_text_start+0x8/0x8
[ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f
[ 45.226868] ? __kthread_parkme+0x87/0xf0
[ 45.229200] kthread+0x2f7/0x3b0
[ 45.231557] ? process_one_work+0x15d0/0x15d0
[ 45.233923] ? kthread_park+0x120/0x120
[ 45.236249] ret_from_fork+0x35/0x40
[ 45.240875] Allocated by task 242:
[ 45.243136] save_stack+0x43/0xd0
[ 45.245385] kasan_kmalloc+0xc4/0xe0
[ 45.247597] kmem_cache_alloc_trace+0xdd/0x190
[ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[ 45.259200] process_one_work+0x88d/0x15d0
[ 45.261597] worker_thread+0x1a5/0x1470
[ 45.264038] kthread+0x2f7/0x3b0
[ 45.266371] ret_from_fork+0x35/0x40
[ 45.270937] Freed by task 53:
[ 45.273170] save_stack+0x43/0xd0
[ 45.275382] __kasan_slab_free+0x139/0x190
[ 45.277604] kasan_slab_free+0xe/0x10
[ 45.279826] kfree+0x99/0x1b0
[ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[ 45.286660] process_one_work+0x88d/0x15d0
[ 45.288934] worker_thread+0x1a5/0x1470
[ 45.291231] kthread+0x2f7/0x3b0
[ 45.293547] ret_from_fork+0x35/0x40
[ 45.298206] The buggy address belongs to the object at ffff8882b4b70968
which belongs to the cache kmalloc-2k of size 2048
[ 45.303047] The buggy address is located 0 bytes inside of
2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[ 45.308010] The buggy address belongs to the page:
[ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[ 45.313051] flags: 0x8000000000010200(slab|head)
[ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 45.320966] page dumped because: kasan: bad access detected
[ 45.326312] Memory state around the buggy address:
[ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[ 45.337302] ^
[ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.345748] ==================================================================
So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.
If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.
What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.
Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
|
|
Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.
This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't bounce back to the root level for fragment processing, because
huge pages are not supported at that level. This is unlikely to happen
with the default VM size on Vega, but can be exposed by limiting the
VM size with the amdgpu.vm_size module parameter.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Avoid potential integer overflows with left shift in huge-page mapping
code by casting the operand to uin64_t first.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This essential mode for PAL users is missing, so add it.
Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Currently on driver bringup with KASAN enabled, meson triggers an OOB
memory access as shown below:
[ 117.904528] ==================================================================
[ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890
[ 117.904588] Read of size 4 at addr ffff20000a63ce24 by task systemd-udevd/498
[ 117.904601]
[ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20
[ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 118.099768] Call trace:
[ 118.102181] dump_backtrace+0x0/0x3e8
[ 118.105796] show_stack+0x14/0x20
[ 118.109083] dump_stack+0x130/0x1c4
[ 118.112539] print_address_description+0x60/0x25c
[ 118.117214] kasan_report+0x1b4/0x368
[ 118.120851] __asan_report_load4_noabort+0x18/0x20
[ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890
[ 118.129953] meson_viu_init+0x10c/0x290
[ 118.133741] meson_drv_bind_master+0x474/0x748
[ 118.138141] meson_drv_bind+0x10/0x18
[ 118.141760] try_to_bring_up_master+0x3d8/0x768
[ 118.146249] component_add+0x214/0x570
[ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi]
[ 118.155404] platform_drv_probe+0x98/0x138
[ 118.159455] really_probe+0x2a0/0xa70
[ 118.163070] driver_probe_device+0x1b4/0x2d8
[ 118.167299] __driver_attach+0x200/0x280
[ 118.171189] bus_for_each_dev+0x10c/0x1a8
[ 118.175144] driver_attach+0x38/0x50
[ 118.178681] bus_add_driver+0x330/0x608
[ 118.182471] driver_register+0x140/0x388
[ 118.186361] __platform_driver_register+0xc8/0x108
[ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi]
[ 118.198022] do_one_initcall+0x12c/0x3bc
[ 118.201883] do_init_module+0x1fc/0x638
[ 118.205673] load_module+0x4b4c/0x6808
[ 118.209387] __se_sys_init_module+0x2e8/0x3c0
[ 118.213699] __arm64_sys_init_module+0x68/0x98
[ 118.218100] el0_svc_common+0x104/0x210
[ 118.221893] el0_svc_handler+0x48/0xb8
[ 118.225594] el0_svc+0x8/0xc
[ 118.228429]
[ 118.229887] The buggy address belongs to the variable:
[ 118.235007] eotf_33_linear_mapping+0x84/0xc0
[ 118.239301]
[ 118.240752] Memory state around the buggy address:
[ 118.245522] ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 118.252695] ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 118.259850] >ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00
[ 118.267000] ^
[ 118.271222] ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[ 118.278393] ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa
[ 118.285542] ==================================================================
[ 118.292699] Disabling lock debugging due to kernel taint
It seems that when looping through the OSD EOTF LUT maps, we use the
same max iterator for OETF: 20. This is wrong though, since 20*2 is 40,
which means that we'll stop out of bounds on the EOTF maps.
But, this whole thing is already confusing enough to read through as-is,
so let's just replace all of the hardcoded sizes with
OSD_(OETF/EOTF)_LUT_SIZE / 2.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.10+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181125012117.31915-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Seeing as we use this registermap in the context of our IRQ handlers, we
need to be using spinlocks for reading/writing registers so that we can
still read them from IRQ handlers without having to grab any mutexes and
accidentally sleep. We don't currently do this, as pointed out by
lockdep:
[ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0
[ 18.413864] INFO: lockdep is turned off.
[ 18.417675] irq event stamp: 12
[ 18.420778] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[ 18.429510] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[ 18.437345] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[ 18.446684] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9
[ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 18.480037] Workqueue: hci0 hci_power_on [bluetooth]
[ 18.487138] Call trace:
[ 18.494192] dump_backtrace+0x0/0x1b8
[ 18.501280] show_stack+0x14/0x20
[ 18.508361] dump_stack+0xbc/0xf4
[ 18.515427] ___might_sleep+0x140/0x1d8
[ 18.522515] __might_sleep+0x50/0x88
[ 18.529582] __mutex_lock+0x60/0x870
[ 18.536621] mutex_lock_nested+0x1c/0x28
[ 18.543660] regmap_lock_mutex+0x10/0x18
[ 18.550696] regmap_read+0x38/0x70
[ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[ 18.564804] __handle_irq_event_percpu+0xac/0x410
[ 18.571891] handle_irq_event_percpu+0x34/0x88
[ 18.578982] handle_irq_event+0x48/0x78
[ 18.586051] handle_fasteoi_irq+0xac/0x160
[ 18.593061] generic_handle_irq+0x24/0x38
[ 18.599989] __handle_domain_irq+0x60/0xb8
[ 18.606857] gic_handle_irq+0x50/0xa0
[ 18.613659] el1_irq+0xb4/0x130
[ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30
[ 18.627111] schedule+0x38/0xa0
[ 18.633781] schedule_timeout+0x3a8/0x510
[ 18.640389] wait_for_common+0x15c/0x180
[ 18.646905] wait_for_completion+0x14/0x20
[ 18.653319] mmc_wait_for_req_done+0x28/0x168
[ 18.659693] mmc_wait_for_req+0xa8/0xe8
[ 18.665978] mmc_wait_for_cmd+0x64/0x98
[ 18.672180] mmc_io_rw_direct_host+0x94/0x130
[ 18.678385] mmc_io_rw_direct+0x10/0x18
[ 18.684516] sdio_enable_func+0xe8/0x1d0
[ 18.690627] btsdio_open+0x24/0xc0 [btsdio]
[ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth]
[ 18.703025] hci_power_on+0x50/0x270 [bluetooth]
[ 18.709163] process_one_work+0x2a0/0x6e0
[ 18.715252] worker_thread+0x40/0x448
[ 18.721310] kthread+0x12c/0x130
[ 18.727326] ret_from_fork+0x10/0x1c
[ 18.735555] ------------[ cut here ]------------
[ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000006265ec59>] wait_for_common+0x140/0x180
[ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88
[ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod
btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic
brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O)
dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec
leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas
meson_gxbb_wdt pwm_meson efivarfs ipv6
[ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9
[ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 18.818045] Workqueue: hci0 hci_power_on [bluetooth]
[ 18.824088] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 18.829891] pc : __might_sleep+0x7c/0x88
[ 18.835722] lr : __might_sleep+0x7c/0x88
[ 18.841256] sp : ffff000008003cb0
[ 18.846751] x29: ffff000008003cb0 x28: 0000000000000000
[ 18.852269] x27: ffff00000938e000 x26: ffff800010283000
[ 18.857726] x25: ffff800010353280 x24: ffff00000868ef50
[ 18.863166] x23: 0000000000000000 x22: 0000000000000000
[ 18.868551] x21: 0000000000000000 x20: 000000000000038c
[ 18.873850] x19: ffff000008cd08c0 x18: 0000000000000010
[ 18.879081] x17: ffff000008a68cb0 x16: 0000000000000000
[ 18.884197] x15: 0000000000aaaaaa x14: 0e200e200e200e20
[ 18.889239] x13: 0000000000000001 x12: 00000000ffffffff
[ 18.894261] x11: ffff000008adfa48 x10: 0000000000000001
[ 18.899517] x9 : ffff0000092a0158 x8 : 0000000000000000
[ 18.904674] x7 : ffff00000812136c x6 : 0000000000000000
[ 18.909895] x5 : 0000000000000000 x4 : 0000000000000001
[ 18.915080] x3 : 0000000000000007 x2 : 0000000000000007
[ 18.920269] x1 : 99ab8e9ebb6c8500 x0 : 0000000000000000
[ 18.925443] Call trace:
[ 18.929904] __might_sleep+0x7c/0x88
[ 18.934311] __mutex_lock+0x60/0x870
[ 18.938687] mutex_lock_nested+0x1c/0x28
[ 18.943076] regmap_lock_mutex+0x10/0x18
[ 18.947453] regmap_read+0x38/0x70
[ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[ 18.956269] __handle_irq_event_percpu+0xac/0x410
[ 18.960712] handle_irq_event_percpu+0x34/0x88
[ 18.965176] handle_irq_event+0x48/0x78
[ 18.969612] handle_fasteoi_irq+0xac/0x160
[ 18.974058] generic_handle_irq+0x24/0x38
[ 18.978501] __handle_domain_irq+0x60/0xb8
[ 18.982938] gic_handle_irq+0x50/0xa0
[ 18.987351] el1_irq+0xb4/0x130
[ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30
[ 18.996180] schedule+0x38/0xa0
[ 19.000609] schedule_timeout+0x3a8/0x510
[ 19.005064] wait_for_common+0x15c/0x180
[ 19.009513] wait_for_completion+0x14/0x20
[ 19.013951] mmc_wait_for_req_done+0x28/0x168
[ 19.018402] mmc_wait_for_req+0xa8/0xe8
[ 19.022809] mmc_wait_for_cmd+0x64/0x98
[ 19.027177] mmc_io_rw_direct_host+0x94/0x130
[ 19.031563] mmc_io_rw_direct+0x10/0x18
[ 19.035922] sdio_enable_func+0xe8/0x1d0
[ 19.040294] btsdio_open+0x24/0xc0 [btsdio]
[ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth]
[ 19.049228] hci_power_on+0x50/0x270 [bluetooth]
[ 19.053687] process_one_work+0x2a0/0x6e0
[ 19.058143] worker_thread+0x40/0x448
[ 19.062608] kthread+0x12c/0x130
[ 19.067064] ret_from_fork+0x10/0x1c
[ 19.071513] irq event stamp: 12
[ 19.075937] hardirqs last enabled at (11): [<ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[ 19.083560] hardirqs last disabled at (12): [<ffff000008a48914>] __schedule+0xc4/0xa60
[ 19.091401] softirqs last enabled at (0): [<ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[ 19.100801] softirqs last disabled at (0): [<0000000000000000>] (null)
[ 19.108135] ---[ end trace 38c4920787b88c75 ]---
So, fix this by enabling the fast_io option in our regmap config so that
regmap uses spinlocks for locking instead of mutexes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124191238.28276-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Since Linux 4.17, calls to drm_crtc_vblank_on/off are mandatory, and we get
a warning when ctrc is disabled :
" driver forgot to call drm_crtc_vblank_off()"
But, the vsync IRQ was not totally disabled due the transient hardware
state and specific interrupt line, thus adding proper IRQ masking from
the HHI system control registers.
The last change fixes a race condition introduced by calling the added
drm_crtc_vblank_on/off when an HPD event occurs from the HDMI connector,
triggering a WARN_ON() in the _atomic_begin() callback when the CRTC
is disabled, thus also triggering a WARN_ON() in drm_vblank_put() :
WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/meson/meson_crtc.c:157 meson_crtc_atomic_begin+0x78/0x80
[...]
Call trace:
meson_crtc_atomic_begin+0x78/0x80
drm_atomic_helper_commit_planes+0x140/0x218
drm_atomic_helper_commit_tail+0x38/0x80
commit_tail+0x7c/0x80
drm_atomic_helper_commit+0xdc/0x150
drm_atomic_commit+0x54/0x60
restore_fbdev_mode_atomic+0x198/0x238
restore_fbdev_mode+0x6c/0x1c0
drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xf0
drm_fb_helper_set_par+0x34/0x60
drm_fb_helper_hotplug_event.part.28+0xb8/0xc8
drm_fbdev_client_hotplug+0xa4/0xe0
drm_client_dev_hotplug+0x90/0xe0
drm_kms_helper_hotplug_event+0x3c/0x48
drm_helper_hpd_irq_event+0x134/0x168
dw_hdmi_top_thread_irq+0x3c/0x50
[...]
WARNING: CPU: 0 PID: 1185 at drivers/gpu/drm/drm_vblank.c:1026 drm_vblank_put+0xb4/0xc8
[...]
Call trace:
drm_vblank_put+0xb4/0xc8
drm_crtc_vblank_put+0x24/0x30
drm_atomic_helper_wait_for_vblanks.part.9+0x130/0x2b8
drm_atomic_helper_commit_tail+0x68/0x80
[...]
The issue is that vblank need to be enabled in any occurrence of :
- atomic_enable()
- atomic_begin() and state->enable == true, which was not the case
Moving the CRTC enable code to a common function and calling in one of
these occurrence solves this race condition and makes sure vblank is
enabled in each call to _atomic_begin() from the HPD event leading to
drm_atomic_helper_commit_planes().
To Summarize :
- Make sure that the CRTC code will call the drm_crtc_vblank_on()/off()
- *Really* mask the Vsync IRQ
- Initialize and enable vblank at the first
atomic_begin()/_atomic_enable()
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[fixed typos+added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122160103.10993-1-narmstrong@baylibre.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
When drm_new_set_master() fails, set is_master to 0, to prevent a
possible NULL pointer deref.
Here is a problematic flow: we check is_master in drm_is_current_master(),
then proceed to call drm_lease_owner() passing master. If we do not restore
is_master status when drm_new_set_master() fails, we may have a situation
in which is_master will be 1 and master itself, NULL, leading to the deref
of a NULL pointer in drm_lease_owner().
This fixes the following OOPS, observed on an ArchLinux running a 4.19.2
kernel:
[ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
[ 97.807224] PGD 0 P4D 0
[ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1
[ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018
[ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0
[ 97.807224] Call Trace:
[ 97.807224] drm_is_current_master+0x1a/0x30 [drm]
[ 97.807224] drm_master_release+0x3e/0x130 [drm]
[ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm]
[ 97.807224] drm_open+0x1ba/0x1e0 [drm]
[ 97.807224] drm_stub_open+0xaf/0xe0 [drm]
[ 97.807224] chrdev_open+0xa3/0x1b0
[ 97.807224] ? cdev_put.part.0+0x20/0x20
[ 97.807224] do_dentry_open+0x132/0x340
[ 97.807224] path_openat+0x2d1/0x14e0
[ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520
[ 97.807224] do_filp_open+0x93/0x100
[ 97.807224] ? __check_object_size+0x102/0x189
[ 97.807224] ? _raw_spin_unlock+0x16/0x30
[ 97.807224] do_sys_open+0x186/0x210
[ 97.807224] do_syscall_64+0x5b/0x170
[ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 97.807224] RIP: 0033:0x7f4147b07976
[ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44
[ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976
[ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c
[ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000
[ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024
[ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012
[ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid
[ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler
[ 98.040039] CR2: 0000000000000080
[ 98.040039] ---[ end trace 3b65093b6fe62b2f ]---
[ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202
[ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88
[ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000
[ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000
[ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888
[ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8
[ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000
[ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0
Signed-off-by: Sergio Correia <sergio@correia.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Jerry Zuo pointed out a rather obscure hotplugging issue that it seems I
accidentally introduced into DRM two years ago.
Pretend we have a topology like this:
|- DP-1: mst_primary
|- DP-4: active display
|- DP-5: disconnected
|- DP-6: active hub
|- DP-7: active display
|- DP-8: disconnected
|- DP-9: disconnected
If we unplug DP-6, the topology starting at DP-7 will be destroyed but
it's payloads will live on in DP-1's VCPI allocations and thus require
removal. However, this removal currently fails because
drm_dp_update_payload_part1() will (rightly so) try to validate the port
before accessing it, fail then abort. If we keep going, eventually we
run the MST hub out of bandwidth and all new allocations will start to
fail (or in my case; all new displays just start flickering a ton).
We could just teach drm_dp_update_payload_part1() not to drop the port
ref in this case, but then we also need to teach
drm_dp_destroy_payload_step1() to do the same thing, then hope no one
ever adds anything to the that requires a validated port reference in
drm_dp_destroy_connector_work(). Kind of sketchy.
So let's go with a more clever solution: any port that
drm_dp_destroy_connector_work() interacts with is guaranteed to still
exist in memory until we say so. While said port might not be valid we
don't really care: that's the whole reason we're destroying it in the
first place! So, teach drm_dp_get_validated_port_ref() to use the all
mighty current_work() function to avoid attempting to validate ports
from the context of mgr->destroy_connector_work. I can't see any
situation where this wouldn't be safe, and this avoids having to play
whack-a-mole in the future of trying to work around port validation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 263efde31f97 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
Reported-by: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113224613.28809-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
drm-intel-fixes
gvt-fixes-2018-11-26
- Fix engine check for correct MOCS regs load (Xinyun)
- Fix rpm locking for vGPU ggtt init (Henry)
- Fix use-after-free when destroy partial ggtt entries (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126021820.GL12743@zhen-hp.sh.intel.com
|
|
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for
the first group and DSYSR2 for the second group. On most DU instances,
this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't
exist, but DSYSR2 does. There is no CRTC object there that maps to the
correct DSYSR register.
Commit 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known
initial value") switched group start/stop from using group read/write
access to DSYSR to a CRTC-based API to cache the DSYSR value. While
doing so, it introduced a regression on M3-N by accessing DSYSR3 instead
of DSYSR2 to start/stop the second group.
To fix this, access the DSYSR register directly through group read/write
if the SoC is missing the first DU channel of the group. Keep using the
rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR
caching feature.
Fixes: 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value")
Reported-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of the high-resolution scrolling feature, as it breaks certain
hardware due to incompatibilities between Logitech and Microsoft
worlds. Peter Hutterer is working on a fixed implementation. Until
that is finished, revert by Benjamin Tissoires.
- revert of incorrect strncpy->strlcpy conversion in uhid, from David
Herrmann
- fix for buggy sendfile() implementation on uhid device node, from
Eric Biggers
- a few assorted device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "Input: Add the `REL_WHEEL_HI_RES` event code"
Revert "HID: input: Create a utility class for counting scroll events"
Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""
Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"
Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"
Revert "HID: logitech: fix a used uninitialized GCC warning"
Revert "HID: input: simplify/fix high-res scroll event handling"
HID: Add quirk for Primax PIXART OEM mice
HID: i2c-hid: Disable runtime PM for LG touchscreen
HID: multitouch: Add pointstick support for Cirque Touchpad
HID: steam: remove input device when a hid client is running.
Revert "HID: uhid: use strlcpy() instead of strncpy()"
HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges
HID: input: Ignore battery reported by Symbol DS4308
HID: Add quirk for Microsoft PIXART OEM mouse
|
|
Pull networking fixes from David Miller:
1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter.
2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann.
3) Fix socket wmem accounting in SCTP, from Xin Long.
4) Fix failed resume crash in ena driver, from Arthur Kiyanovski.
5) qed driver passes bytes instead of bits into second arg of
bitmap_weight(). From Denis Bolotin.
6) Fix reset deadlock in ibmvnic, from Juliet Kim.
7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr
Machata.
8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK
compression during this period, from Eric Dumazet.
9) Add atomicity to SMC protocol cursor handling, from Ursula Braun.
10) Don't leave dangling error pointer if bpf_prog_add() fails in
thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO
headers, set sq->tso_hdrs to NULL.
11) Fix race condition over state variables in act_police, from Davide
Caratti.
12) Disable guest csum in the presence of XDP in virtio_net, from Jason
Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: gemini: Fix copy/paste error
net: phy: mscc: fix deadlock in vsc85xx_default_config
dt-bindings: dsa: Fix typo in "probed"
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
net: amd: add missing of_node_put()
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
virtio-net: fail XDP set if guest csum is negotiated
virtio-net: disable guest csum during XDP set
net/sched: act_police: add missing spinlock initialization
net: don't keep lonely packets forever in the gro hash
net/ipv6: re-do dad when interface has IFF_NOARP flag change
packet: copy user buffers before orphan or clone
ibmvnic: Update driver queues after change in ring size support
ibmvnic: Fix RX queue buffer cleanup
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net/dim: Update DIM start sample after each DIM iteration
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
net/smc: use after free fix in smc_wr_tx_put_slot()
net/smc: atomic SMCD cursor handling
net/smc: add SMC-D shutdown signal
...
|
|
The TX stats should be started with the tx_stats_syncp,
there seems to be a copy/paste error in the driver.
Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vsc85xx_default_config function called in the vsc85xx_config_init
function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
mistakenly calls phy_read and phy_write in-between phy_select_page and
phy_restore_page.
phy_select_page and phy_restore_page actually take and release the MDIO
bus lock and phy_write and phy_read take and release the lock to write
or read to a PHY register.
Let's fix this deadlock by using phy_modify_paged which handles
correctly a read followed by a write in a non-standard page.
Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions")
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine
since it is used to check if tso dma descriptor queue has been previously
allocated. The issue can be triggered with the following reproducer:
$ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o
$ip link set dev enP2p1s0v0 xdpdrv off
[ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0
[ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 341.526654] pc : __vunmap+0x98/0xe0
[ 341.530132] lr : __vunmap+0x98/0xe0
[ 341.533609] sp : ffff00001c5db860
[ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000
[ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000
[ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000
[ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0
[ 341.558117] x21: 0000000000000000 x20: 0000000000000000
[ 341.563418] x19: ffff000017e57000 x18: 0000000000000000
[ 341.568719] x17: 0000000000000000 x16: 0000000000000000
[ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff
[ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f
[ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510
[ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8
[ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef
[ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000
[ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff
[ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038
[ 341.616428] Call trace:
[ 341.618866] __vunmap+0x98/0xe0
[ 341.621997] vunmap+0x3c/0x50
[ 341.624961] arch_dma_free+0x68/0xa0
[ 341.628534] dma_direct_free+0x50/0x80
[ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf]
[ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf]
[ 341.642890] nicvf_stop+0x298/0x340 [nicvf]
[ 341.647066] __dev_close_many+0x9c/0x108
[ 341.650977] dev_close_many+0xa4/0x158
[ 341.654720] rollback_registered_many+0x140/0x530
[ 341.659414] rollback_registered+0x54/0x80
[ 341.663499] unregister_netdevice_queue+0x9c/0xe8
[ 341.668192] unregister_netdev+0x28/0x38
[ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf]
[ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf]
[ 341.680630] pci_device_shutdown+0x44/0x88
[ 341.684720] device_shutdown+0x144/0x250
[ 341.688640] kernel_restart_prepare+0x44/0x50
[ 341.692986] kernel_restart+0x20/0x68
[ 341.696638] __se_sys_reboot+0x210/0x238
[ 341.700550] __arm64_sys_reboot+0x24/0x30
[ 341.704555] el0_svc_handler+0x94/0x110
[ 341.708382] el0_svc+0x8/0xc
[ 341.711252] ---[ end trace 3f4019c8439959c9 ]---
[ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4
[ 341.723872] flags: 0x1fffe000000000()
[ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000
[ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
[ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
where xdp_dummy.c is a simple bpf program that forwards the incoming
frames to the network stack (available here:
https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c)
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.
On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.
Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: Liang Li <liali@redhat.com>
Fixes: fc423ff00df3a ("team: add peer notification")
Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't support partial csumed packet since its metadata will be lost
or incorrect during XDP processing. So fail the XDP set if guest_csum
feature is negotiated.
Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we
can receive partial csumed packets with metadata kept in the
vnet_hdr. This may have several side effects:
- It could be overridden by header adjustment, thus is might be not
correct after XDP processing.
- There's no way to pass such metadata information through
XDP_REDIRECT to another driver.
- XDP does not support checksum offload right now.
So simply disable guest csum if possible in this the case of XDP.
Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pavel Popa <pashinho1990@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for this week, fixing an issue with nvme-fc"
* tag 'for-linus-20181123' of git://git.kernel.dk/linux-block:
nvme-fc: resolve io failures during connect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and
an unbalance in an allocate/free path (allocated with memremap, freed
with iounmap)
- Fix for a crash in the Renesas IOMMU driver
- Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the
AMD IOMMU driver
* tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Use memunmap to free memremap
amd/iommu: Fix Guest Virtual APIC Log Tail Address Register
iommu/ipmmu-vmsa: Fix crash on early domain free
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent the ACPI core from registering a platform device for the
SMB0001 HID to avoid IRQ allocation issues (Hans de Goede)"
* tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add SMB0001 HID to forbidden_id_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the Operating Performance Points (OPP)
framework, one cpufreq driver issue, one problem related to the tasks
freezer and a few build-related issues in the cpupower utility.
Specifics:
- Fix tasks freezer deadlock in de_thread() that occurs if one of its
sub-threads has been frozen already (Chanho Min).
- Avoid registering a platform device by the ti-cpufreq driver on
platforms that cannot use it (Dave Gerlach).
- Fix a mistake in the ti-opp-supply operating performance points
(OPP) driver that caused an incorrect reference voltage to be used
and make it adjust the minimum voltage dynamically to avoid hangs
or crashes in some cases (Keerthy).
- Fix issues related to compiler flags in the cpupower utility and
correct a linking problem in it by renaming a file with a duplicate
name (Jiri Olsa, Konstantin Khlebnikov)"
* tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
exec: make de_thread() freezable
cpufreq: ti-cpufreq: Only register platform_device when supported
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Minor stuff except the IDA leak which was kind of important to fix.
Also new maintainers, yay.
- Do not lose an IDA on the gpiochip register errorpath.
- Fix the PXA non-pincontrol GPIO-using platforms.
- Fix the direction on the mockup GPIO driver.
- Add some MAINTAINERS stuff: Bartosz stepped up as GPIO
co-maintainer, and Andy established an Intel git tree"
* tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
MAINTAINERS: Do maintain Intel GPIO drivers via separate tree
gpio: mockup: fix indicated direction
gpio: pxa: fix legacy non pinctrl aware builds again
gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path
MAINTAINERS: add myself as co-maintainer of gpiolib
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci-pci: Fixup card detect lookup
- sdhci-pci: Workaround GLK firmware bug for tuning"
* tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value
mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
|
|
Pull drm fixes from Dave Airlie:
"Regular drm fixes:
amdgpu:
- Vega20 fixes
- firmware loading fix
- panel display fix
- override fix
i915:
- Sandybridge lockup fix
- fastboot DSI panel fix
- GPU hang on Broxton
- GPU reloc fixes on pineview/bearlake
ast:
- screen blurring fix
- cursor appearance fix
udmabuf:
- mmap fix
vc4:
- NULL deref fix
- async cursor update fix
All seems pretty normal at this stage"
* tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fixed cursor may disappear sometimes
drm/ast: change resolution may cause screen blurred
drm/i915: Add rotation readout for plane initial config
drm/i915: Force a LUT update in intel_initial_commit()
drm/fb-helper: Blacklist writeback when adding connectors to fbdev
drm/i915: Write GPU relocs harder with gen3
drm/amdgpu: Enable HDP memory light sleep
drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture
drm/amd/pp: handle negative values when reading OD
drm/amdgpu: Add missing firmware entry for HAINAN
drm/amd/powerplay: disable Vega20 DS related features
drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset
drm/i915: Disable LP3 watermarks on all SNB machines
drm/ast: Remove existing framebuffers before loading driver
udmabuf: set read/write flag when exporting
drm/amd/display: Support amdgpu "max bpc" connector property (v2)
drm/amdgpu: Add amdgpu "max bpc" connector property (v2)
drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates
drm/vc4: Fix NULL pointer dereference in the async update path
|
|
* pm-cpufreq:
cpufreq: ti-cpufreq: Only register platform_device when supported
* pm-sleep:
exec: make de_thread() freezable
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225
- Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines
- Avoid GPU hang on error capture on Broxton with Vt-d enabled
- Avoid missing GPU relocations on Pineview and Bearlake (Gen3)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122120555.GA18282@jlahtine-desk.ger.corp.intel.com
|
|
During device reset, queue memory is not being updated to accommodate
changes in ring buffer sizes supported by backing hardware. Track
any differences in ring buffer sizes following the reset and update
queue memory when possible.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine
reports the error code instead of NULL in case of failure and xdp_prog
pointer value is used in the driver to verify if XDP is currently
enabled.
Moreover report the error code to userspace if nicvf_xdp_setup fails
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for issues that have been
reported.
Nothing major, highlights include:
- gnss sync write fixes
- uio oops fix
- nvmem fixes
- other minor fixes and some documentation/maintainers updates
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/security-bugs: Postpone fix publication in exceptional cases
MAINTAINERS: Add Sasha as a stable branch maintainer
gnss: sirf: fix synchronous write timeout
gnss: serial: fix synchronous write timeout
uio: Fix an Oops on load
test_firmware: fix error return getting clobbered
nvmem: core: fix regression in of_nvmem_cell_get()
misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data
drivers/misc/sgi-gru: fix Spectre v1 vulnerability
Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up
slimbus: ngd: remove unnecessary check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.20-rc4.
There's the usual xhci and dwc2/3 fixes as well as a few minor other
issues resolved for problems that have been reported. Full details are
in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdc-acm: add entry for Hiro (Conexant) modem
usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
usb: core: Fix hub port connection events lost
usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
usb: dwc2: pci: Fix an error code in probe
usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
usb: xhci: fix timeout for transition from RExit to U0
usb: xhci: fix uninitialized completion when USB3 port got wrong status
xhci: Add check for invalid byte size error when UAS devices are connected.
xhci: handle port status events for removed USB3 hcd
xhci: Fix leaking USB3 shared_hcd at xhci removal
USB: misc: appledisplay: add 20" Apple Cinema Display
USB: quirks: Add no-lpm quirk for Raydium touchscreens
usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
usb: dwc3: core: Clean up ULPI device
|
|
Pull mtd fixes from Boris Brezillon:
"SPI NOR fixes:
- Various fixes related to the SFDP parsing code merged in 4.20
- Fix for a page fault in the cadence-qspi
NAND fixes:
- Fix a macro name conflict between the QCOM NAND controller driver
and the RISC-V asm headers
- Fix of-node handling in the atmel driver"
* tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd:
mtd: spi-nor: fix selection of uniform erase type in flexible conf
mtd: spi-nor: Fix Cadence QSPI page fault kernel panic
mtd: rawnand: qcom: Namespace prefix some commands
mtd: rawnand: atmel: fix OF child-node lookup
mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()
mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use()
mtd: spi-nor: fix iteration over smpt array
mtd: spi-nor: don't drop sfdp data if optional parsers fail
|
