summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-08-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are the two bug fixes I mentioned in the final merge window pull. One is a reversed logic check in the device busy tests which can cause a nasty hang and another crash seen in the new SCSI pool support if the use count ever goes to zero" [ The device busy test already got merged from a patch earlier, so is now duplicated. ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] save command pool address of Scsi_Host [SCSI] fix qemu boot hang problem
2014-08-19scsi: Fix qemu boot hang problemGuenter Roeck
The latest kernel fails to boot qemu arm images when using scsi for disk access. Boot gets stuck after the following messages. brd: module loaded sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103) sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93 sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi host0: sym-2.2.3 Bisect points to commit 71e75c97f97a ("scsi: convert device_busy to atomic_t"). Code inspection shows the following suspicious change in scsi_request_fn. out_delay: - if (sdev->device_busy == 0 && !scsi_device_blocked(sdev)) + if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev)) blk_delay_queue(q, SCSI_QUEUE_DELAY); } 'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)', meaning the logic was reversed. Changing this expression to '!atomic_read(&sdev->device_busy)' fixes the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@fb.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Reviewed-by: Webb Scales <webbnh@hp.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-19Merge tag 'md/3.17-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull md bugfixes from Neil Brown: "Here are the bug-fixes I promised :-) Funny how you start looking for one and other start appearing. - raid6 data corruption during recovery - raid6 livelock - raid10 memory leaks" * tag 'md/3.17-fixes' of git://neil.brown.name/md: md/raid10: always initialise ->state on newly allocated r10_bio md/raid10: avoid memory leak on error path during reshape. md/raid10: Fix memory leak when raid10 reshape completes. md/raid10: fix memory leak when reshaping a RAID10. md/raid6: avoid data corruption during recovery of double-degraded RAID6 md/raid5: avoid livelock caused by non-aligned writes.
2014-08-19Merge tag 'pci-v3.17-changes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Marvell MVEBU - Remove ARCH_KIRKWOOD dependency (Andrew Lunn) NVIDIA Tegra - Add debugfs support (Thierry Reding) Synopsys DesignWare - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I) - Program ATU with untranslated address (Kishon Vijay Abraham I) - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri) - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri) TI DRA7xx - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)" * tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware PCI: dra7xx: Add TI DRA7xx PCIe driver PCI: designware: Program ATU with untranslated address PCI: designware: Look for configuration space in 'reg', not 'ranges' PCI: tegra: Add debugfs support PCI: mvebu: Remove ARCH_KIRKWOOD dependency
2014-08-19Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree fixes from Grant Likely: "Three more commits needed for v3.17: A bug fix for reserved regions based at address zero, a clarification on how to interpret existence of both interrupts and interrupts-extended properties, and a fix to allow device tree testcases to run on any platform" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/irq: Fix lookup to use 'interrupts-extended' property first Enabling OF selftest to run without machine's devicetree of: Allow mem_reserve of memory with a base address of zero
2014-08-19md/raid10: always initialise ->state on newly allocated r10_bioNeilBrown
Most places which allocate an r10_bio zero the ->state, some don't. As the r10_bio comes from a mempool, and the allocation function uses kzalloc it is often zero anyway. But sometimes it isn't and it is best to be safe. I only noticed this because of the bug fixed by an earlier patch where the r10_bios allocated for a reshape were left around to be used by a subsequent resync. In that case the R10BIO_IsReshape flag caused problems. Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-19md/raid10: avoid memory leak on error path during reshape.NeilBrown
If raid10 reshape fails to find somewhere to read a block from, it returns without freeing memory... Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-19md/raid10: Fix memory leak when raid10 reshape completes.NeilBrown
When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Cc: stable@vger.kernel.org (v3.5+) Fixes: 3ea7daa5d7fde47cd41f4d56c2deb949114da9d6 Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-19md/raid10: fix memory leak when reshaping a RAID10.NeilBrown
raid10 reshape clears unwanted bits from a bio->bi_flags using a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC was added. Since then it clears that bit but shouldn't. This results in a memory leak. So change to used the approved method of clearing unwanted bits. As this causes a memory leak which can consume all of memory the fix is suitable for -stable. Fixes: a38352e0ac02dbbd4fa464dc22d1352b5fbd06fd Cc: stable@vger.kernel.org (v3.10+) Reported-by: mdraid.pkoch@dfgh.net (Peter Koch) Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-18md/raid6: avoid data corruption during recovery of double-degraded RAID6NeilBrown
During recovery of a double-degraded RAID6 it is possible for some blocks not to be recovered properly, leading to corruption. If a write happens to one block in a stripe that would be written to a missing device, and at the same time that stripe is recovering data to the other missing device, then that recovered data may not be written. This patch skips, in the double-degraded case, an optimisation that is only safe for single-degraded arrays. Bug was introduced in 2.6.32 and fix is suitable for any kernel since then. In an older kernel with separate handle_stripe5() and handle_stripe6() functions the patch must change handle_stripe6(). Cc: stable@vger.kernel.org (2.6.32+) Fixes: 6c0069c0ae9659e3a91b68eaed06a5c6c37f45c8 Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: "Manibalan P" <pmanibalan@amiindia.co.in> Tested-by: "Manibalan P" <pmanibalan@amiindia.co.in> Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1090423 Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-08-18md/raid5: avoid livelock caused by non-aligned writes.NeilBrown
If a stripe in a raid6 array received a write to each data block while the array is degraded, and if any of these writes to a missing device are not page-aligned, then a live-lock happens. In this case the P and Q blocks need to be read so that the part of the missing block which is *not* being updated by the write can be constructed. Due to a logic error, these blocks are not loaded, so the update cannot proceed and the stripe is 'handled' repeatedly in an infinite loop. This bug is unlikely as most writes are page aligned. However as it can lead to a livelock it is suitable for -stable. It was introduced in 3.16. Cc: stable@vger.kernel.org (v3.16) Fixed: 67f455486d2ea20b2d94d6adf5b9b783d079e321 Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-16Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
2014-08-16Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-16Merge branch 'rng-queue' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
2014-08-16platform/x86: Enable build support for toshiba_hapsAzael Avalos
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16platform/x86: Toshiba HDD Active Protection SensorAzael Avalos
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the U32UHans de Goede
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16alienware-wmi: make hdmi_mux enabled on case-by-case basisMario Limonciello
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Constify DMI table and other r/o variablesMathias Krause
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi.c: Rename x401u quirk to wapf4Hans de Goede
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16compal-laptop: correct invalid hwmon nameRoald Frederickx
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi listAzael Avalos
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16toshiba_acpi: Add extra check to backlight codeAzael Avalos
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16Fix log message about future removal of interfaceMartin Kepplinger
If this is going away, it won't be in 2012. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Disable touchpad interface on Yoga modelsHans de Goede
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the X550CCHans de Goede
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16intel_ips: Make ips_mcp_limits variables staticMathias Krause
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdataMathias Krause
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata, as snd_ctl_new1() will copy the relevant parts, so there is no need to keep the master copies around after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconstMathias Krause
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 1.5 kB. In turn, the callback functions can be marked with __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16hp-wmi: Add missing __init annotations to initialization codeMathias Krause
These functions are only called from other initialization routines, so can be marked __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16hp_accel: Constify ACPI and DMI tablesMathias Krause
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI tables. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16fujitsu-tablet: Mark DMI callbacks as __init codeMathias Krause
The DMI table is already marked as __initconst, so can be the callback functions as they're only used in that context. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Robert Gerlach <khnz@gmx.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16dell-laptop: Mark dell_quirks[] DMI table as __initconstMathias Krause
The dell_quirks[] DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 5.7 kB. In turn, the callback function can be marked with __init, too. Also the touchpad_led_init() function can be marked __init as it's only referenced from dell_init() -- an __init function. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16eeepc-wmi: Constify asus_quirks[] DMI tableMathias Krause
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Mark init data and code as suchMathias Krause
Quite a lot of code and data of acer-wmi.c is only ever used during initialization. Mark those accordingly -- and constify, where appropriate -- so the memory can be released afterwards. All in all those changes move ~10 kB of code and data to the .init sections, marking them for release after initialization has finished. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Constify asus_quirks[] DMI tableMathias Krause
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16alienware-wmi: Mark DMI table as __initconstMathias Krause
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released appropriately. In turn, the callback function can be marked with __init, too. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEPMathias Krause
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP to get rid of the following warnings: ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function] ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function] Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16acer-wmi: Mark acer_wmi_keymap[] as __initconstMathias Krause
sparse_keymap_setup() will make a copy of the keymap, so we can release the master copy after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16WMI: Remove unnecessary null testHimangi Saraogi
This patch removes the null test on block. block is initialized at the beginning of the function to &wblock->gblock. Since wblock is dereferenced prior to the null test, wblock must be a valid pointer, and &wblock->gblock cannot be null. The following Coccinelle script is used for detecting the change: @r@ expression e,f; identifier g,y; statement S1,S2; @@ *e = &f->g <+... f->y ...+> *if (e != NULL || ...) S1 else S2 Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16drivers/platform/x86/thinkpad_acpi.c: don't test unsigned int for negativityAndrey Utkin
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the X550CLHans de Goede
As reported here: https://bugs.launchpad.net/bugs/1277959 the X550CL needs wapf=4 too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-nb-wmi: Add ASUSTeK COMPUTER INC. X200CAAceLan Kao
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to control the wifi and wifi-led status. But, it'll lead to bt status error if asus-wmi driver controls bt as well. So, for X200CA, asus-wmi driver controls wifi status only and have to set wapf to 1. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-wmi: control wlan-led if wapf > 0AceLan Kao
Wifi will be controlled by asus-wmi driver when wapf > 0 So, controls the wifi-led when wapf > 0 Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-wmi: backlight_init: Stop treating -ENODEV as if its not an errorHans de Goede
When bl_power support got added to asus-wmi, the error handling for it was written to ignore -ENODEV, to avoid not registering a backlight interface for models which have no bl_power control, but do have brightness control. At the same time the error handling for brightness_max was modified to do the same, this is wrong, when there is no brightness_max asus-wmi should not register a backlight interface. Note the caller of asus_wmi_backlight_init already special cases -ENODEV, and will not cause the wmi driver regristration to fail because of a -ENODEV return from asus_wmi_backlight_init. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16asus-wmi: Disable acpi-video backlight on desktop machinesHans de Goede
Some Asus motherboards for desktop PC-s export an acpi-video interface advertising backlight support. Test the dmi chassis-type and tell acpi-video to not register a backlight interface on desktops. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16ideapad-laptop: Change Lenovo Yoga 2 series rfkill handlingHans de Goede
It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16thinkpad_acpi: Update mapping for F12 hotkey on *40 models to KEY_FILEHans de Goede
The new keyboard found on the *40 models is also being sold as a standalone keyboard (with trackpoint): http://shop.lenovo.com/us/en/itemdetails/0B47189/460/60AC6A0372B14F5BA7B12F1FF88E33C7 This uses a standard HUT code for the F12 key with the 6 square boxes on it, which gets mapped to KEY_FILE by the kernel. Change the mapping done of identical laptop key done by thinkpad_acpi to also send KEY_FILE for consistency. Cc: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16eeepc-laptop: rename _set and _get arguments in macroPaul Bolle
The _set and _get arguments to the EEEPC_CREATE_SENSOR_ATTR() macro are confusingly named: _set should be _get and vice versa. Rename these arguments. Drop the trailing semicolon from that macro, while we're at it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-08-16fujitsu-laptop: Clear build warningsJean Delvare
When CONFIG_FUJITSU_LAPTOP_DEBUG is disabled and W=1, the fujitsu-laptop driver builds with the following warnings: drivers/platform/x86/fujitsu-laptop.c: In function "bl_update_status": drivers/platform/x86/fujitsu-laptop.c:409:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body] ret); ^ drivers/platform/x86/fujitsu-laptop.c:418:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body] ret); ^ Rework the debug printk helper macro to get rid of these. I verified that this change has no effect on the generated binary, both in the debug and non-debug case. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jonathan Woithe <jwoithe@just42.net> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 14:22:16 +0000