summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-12-05rtlwifi: rtl8192cu: Fix some code in RF handlingLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Update the power index registersLarry Finger
This patch uses the newly introduced power index register routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Add routines to save/restore power index registersLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Update beacon statistics for USB driverLarry Finger
The USB drivers were not updating the beacon statistics, which led to false beacon loss indications. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Increase the RX queue length for USB driversLarry Finger
The current number of RX buffers queued is 32, which is too small under heavy load. That number is doubled. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Add new definitions in the dm_common headerLarry Finger
Changes in the gain-control mechanism will require some changes in the header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Set the link stateLarry Finger
The present code fails to set the linked state when an interface is added. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Redo register save locationsLarry Finger
The initial USB driver did not use some register save locations in the private data storage. To save some memory, a union was used to overlay these variables with USB I/O components. In an update of the gain-control code, these register save locations are now needed for USB drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Add new firmwareLarry Finger
Vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404 introduced new firmware for these chips. The code try for the new file, and fall back to the original firmware if the new file is not available. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Prevent reconnect attempts if not connectedLarry Finger
This driver has a watchdog timer that attempts to reconnect when beacon frames are not seen for 6 seconds. This patch disables that reconnect whenever the device has never been connected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rt2x00: rt2800lib: no need to write RF register 3 twice for RT5592Kevin Lo
In rt2800_init_rfcsr_5592(), there's no need to write RF register 3 twice. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Remove unused calls to rtl_is_special_data()Larry Finger
When routine rtl_is_special_data() is called with false as its last argument, and the returned value is not tested, the call is essentially an extended no-op. Accordingly, these calls may be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: Fix logging macro with unnecessary semicolonEugene Krasnikov
The wcn36xx_err macro should not end in a semicolon as there are 2 consecutive semicolons in the preprocessed output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Eugene Krasnikov <k.eugene.e@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: enable beacon change using BSS_CHANGED_BEACONChun-Yeow Yeoh
Enable the beacon changed using BSS_CHANGED_BEACON. This is especially useful for mesh mode. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtl8187: Increase RX queue depthLarry Finger
Under heavy load, the relatively small number of RX queue entries are completely filled. With an increase from 16 to 32 entries, this condition rarely happens. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: fix usage of freq_reg_info()Luis R. Rodriguez
freq_reg_info() expects KHz and not MHz, fix this. In this case we'll now be getting the no-ir flags cleared on channels for any channel when the country IE trusts that channel. @@ struct ieee80211_channel *ch; struct wiphy *wiphy; const struct ieee80211_reg_rule *rule; @@ -rule = freq_reg_info(wiphy, ch->center_freq); +rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq)); Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Mihir Shete <smihir@qti.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05brcm80211: fix usage of freq_reg_info()Luis R. Rodriguez
freq_reg_info() expects KHz and not MHz, fix this. In this case we'll now be getting the no-ir flags cleared on channels for any channel when the country IE trusts that channel. @@ struct ieee80211_channel *ch; struct wiphy *wiphy; const struct ieee80211_reg_rule *rule; @@ -rule = freq_reg_info(wiphy, ch->center_freq); +rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq)); Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Arend van Spriel <arend@broadcom.com> Reported-by: Mihir Shete <smihir@qti.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: cw1200: Use consistent internal locking conventionsSolomon Peachy
The cw1200_irq_handler() function expects the hwbus lock to be held when it is called. On the SDIO platform, this lock is implemented in terms of sdio_claim_host/sdio_release_host. This trivial patch makes it explicit that we are performing the hwbus lock rather than something SDIO-specific. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05cw1200: Make the "scan failed" message into a warningSolomon Peachy
The reason that a scan failed for some reason (typically bad parameters) should be logged even when debugging is turned off. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05iwl3945: do not print RFKILL messageStanislaw Gruszka
We can mess logs if user space try to open device again and again if RFKILL switch is on. Do not print message and return ERFKILL error instead to indicate where the problem is. Note that iwl4965 handle this problem differently, it allows to open device when radio is disabled. Reported-by: Dietmar Rudolph <dietmar@crlf.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wl1251: return -ENOMEM if kzalloc failsJing Wang
the original code used goto out if kzalloc fails,but the out include kfree, so return -ENOMEM if kzalloc fails. Signed-off-by: Jing Wang <windsdaemon@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05libertas/sdio: make sure card enters power-off when firmware is loaded.NeilBrown
Since firmware loading became async it is possible that if_sdio_finish_power_of is called with only one remaining runtime_pm reference, so it isn't safe to call pm_runtime_put_noidle. We must call pm_runtime_put(). Diagnosed-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rt2x00: rt2800lib: update RF registers for RT5390Kevin Lo
Mirror the latest MediaTek/Ralink driver with respect to RT5390 RF register programming. The PCI and USB devices use different init values. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05mwifiex: improvements in mwifiex_ret_tx_power_cfg()Amitkumar Karwar
1) Move common code out of switch case handling 2) Return from the function if number of bytes left in response buffer are less than tlv size 3) Pass pg_tlv_hdr directly instead of txp_cfg to mwifiex_get_power_level() Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rt2x00: rt2800lib: Update BBP register initialization for RT53xxKevin Lo
Update bbp register initialization for RT53xx chips to match with the latest MediaTek/Ralink driver. Based on: NICInitRT5390BbpRegisters() From: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5390.c Signed-off-by: Kevin Lo <kevlo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-12-02brcmfmac: expose chip information through debugfsArend van Spriel
Adding the debugfs file <debugfs_mnt>/brcmfmac/<devid>/chipinfo which contains the chip number and revision. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware event related defines to fweh.hArend van Spriel
The dhd.h file contained a number of definitions that are related to events received from the firmware. Those are processed and dispatched in the driver by fweh. Hence the definitions are moved to its include file. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove some unused definitionsArend van Spriel
Removing WLC_PHY_TYPE and some BRCMF_E_.* definitions as these are not used in the driver sources. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Use consistent naming for BCDC.Hante Meuleman
The BCDC protocol layer is using a mix of naming of CDC, BDC and BCDC. Use the name BCDC consistenly over all functions, defines and variables. This patch does not change code functionality. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware command code definitionsArend van Spriel
Move the command codes to the firmware interface module as that makes a bit more sense. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: move firmware related structures to fwil_types.hArend van Spriel
The firmware control interface is provided by fwil source file, but a number of structures used to communicate with the firmware still resided in dhd.h. The patch moves them to fwil_types.h. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove unnecessary EXPORT_SYMBOL() usageArend van Spriel
In bcmsdh.c the functions brcmf_sdio_probe() and brcmf_sdio_remove() were exported, but that is not needed. The functions are linked into the driver module, which is the only one needing to call these. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: provide firmware version in ethtool driver infoArend van Spriel
Knowing the firmware version is pretty useful information when looking at issues. It is retrieved during initialization so store it in driver data structure to fill the ethtool driver info when requested. Reviewed-by: Hante Meuleman <meuleman@brodcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Dynamically register a protocol layer.Hante Meuleman
BCDC is the default protocol layer and being called directly. This patch installs the functions for this layer dynamically. This allows new protocols to be added and selected dynamically depending on the hw capabilties. As currently only BCDC is supported this is always the installed protocol. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove redundant ioctl handlersArend van Spriel
The ioctl() entry points were empty except for handling SIOC_ETHTOOL but that has been obsoleted in favor of struct ethtool_ops. Cleaning up removing the ioctl() handlers. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: use platform specific alignment in SDIOArend van Spriel
The SDIO part of the brcmfmac driver uses a static define BRCMF_SDALIGN to align buffers used for SDIO transfers. This patch replaces it by using alignment derived from the platform specific data. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: determine alignment values during probeArend van Spriel
The alignment values were being determined for each transmit and receive depending on platform data. Instead determine these once during the probe. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: removed dhd_proto.h.Hante Meuleman
dhd_proto.h was cleaned up and prototypes were moved to dhd.h. dhd_proto.h was removed. This is a step in cleaning and restucturing protocol layer. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: rename dhd_cdc to bcdcHante Meuleman
dhd_cdc is renamed to bcdc. This is a step in cleaning and restructuring protocol layer. This is done so new protocols can be added in the future. This step only renames the source files. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> [arend@broadcom.com: use 'git mv' to do the rename] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: add host tx glomming supportFranky Lin
New WiFi full dongle supports receiving chained packets in one command through the SDIO bus. This patch adds the support on the host side to send chained packets. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: add firmware and nvram file name for bcm4339Franky Lin
Add firmware/nvram file name for bcm4339 so fmac can actually be functional with the chip. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: fix driver build issue when CONFIG_BRCMDBG is not setArend van Spriel
When CONFIG_BRCMDBG is not set we get the following build issue: CC [M] drivers/net/wireless/brcm80211/brcmfmac/fwsignal.o drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c: In function ‘brcmf_fws_hdrpush’: drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c:852:18: error: ‘BRCMF_FWS_TYPE_SEQ_LEN’ undeclared The define BRCMF_FWS_TYPE_SEQ_LEN was introduced by: commit 6918f38e4ed4e0493a90a4331e0033bdfc806e00 Author: Hante Meuleman <meuleman@broadcom.com> Date: Wed Oct 23 14:58:51 2013 +0200 brcmfmac: Update fwsignal to fix out of order tx. Unfortunately, it was put in conditional part of the source file under #ifdef DEBUG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: determine sd host controller related variable earlierArend van Spriel
The commit "eb9c174 brcmfmac: determine host controller related variables during probe" was not implemented correctly as the information is already needed in brcmf_sdbrcm_probe(). This patch moves it to brcmf_sdioh_attach() instead. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: support hardware extension header in trace_brcmf_sdpcm_hdr()Arend van Spriel
The SDPCM header can be traced, but it used a fixed header size. With txglom feature the SDPCM header will have additional 8 bytes of hardware extension header so SDIO core can properly handle the txglom packet. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmsmac: select CONFIG_BCMA when possibleArend van Spriel
The brcmsmac relies BCMA functionality to access the device. This patch selects CONFIG_BCMA when CONFIG_BCMA_POSSIBLE is set. This way the user does not need to be select BCMA to make the brcmsmac driver show up in his menuconfig. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: reduce logging noise accessing SDIO SleepCSR registerArend van Spriel
The SleepCSR register is accessed to wakeup the device from the host side. Depending on the state of the device this may take multiple attempts. The failed attempt are not real failures so reduce the log level specifically for this register. The calling function will scream when the multiple attempts all failed. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: remove empty brcmf_proto_stopFranky Lin
remove empty brcmf_proto_stop from protocol layer Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: start netif queues only when setup is completed successfulArend van Spriel
Moving the call to netif_start_queue() after brcmf_cfg80211_up() is completed successful. If not return -EIO instead of -1 as that results in 'Operation not permitted' which can put user on wrong track. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: replace dongle command list with .preinit() callbackArend van Spriel
The bus-specific interface allowed a list of dongle commands to be provided to the common driver part. However, upcoming functionality requires a more dynamic behaviour. Hence the list is replaced by a new callback function so the bus-specific driver part can implement this behaviour. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 02:52:18 +0000