summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-12-02brcmfmac: add separate function for passing bus tx overheadArend van Spriel
The common driver needs the packet overhead for the bus in order to reserve headroom for sk_buffs. For the SDIO driver this depends on firmware features so it is not possible to provide it in the brcmf_attach() call. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02brcmfmac: Update fwsignal to fix out of order tx.Hante Meuleman
When using fwsignal it is possible that tx packets get delivered out of order. This patch fixes that by reordering suppressed packets and tracking generation bit and sequence number per packet. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix initvals for freq 2484Sujith Manoharan
This is missing for AR9300, AR9580 and AR9340. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Update AR9340 initvalsSujith Manoharan
* Baseband updates * Remove ar9340Common_rx_gain_table_1p0 since it is a duplicate. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Update initvals for AR9580 v1.0Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Update initvals for AR9300 v2.2Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Remove duplicate initvals for AR9462 v2.1Sujith Manoharan
The initvals for AR9462 v2.1 are very similar to v2.0. Identify duplicate arrays and reuse the values from v2.0 to reduce module size. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Attach INI arrays for AR9565 v1.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add version macros for AR9565 1.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add initvals for AR9565 1.1Sujith Manoharan
The initialization arrays for v1.1 AR9565 are mostly the same as v1.0/v1.0.1 except for radio_postamble. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Cleanup IQ calibration for PCOEM chipsSujith Manoharan
Since IQ calibration is done as part of AGC calibration for AR9485 and above, remove the seperate IQ calibration code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k_hw: allow fast channel change when only CHANNEL_HT changesFelix Fietkau
The CHANNEL_HT flag is insignificant for fast channel change conditions, since it does not affect any important part of the hardware reset / channel setup. Scanning usually runs with HT disabled, so this change will slightly improve scan time on many chipsets. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k_hw: fix TSF save/restore around chip resetFelix Fietkau
A cold reset can be triggered because of DMA stop issues, and this leads to TSF being cleared on all chipsets. To properly deal with this, always save the TSF. Additionally, account for the time it takes to do the actual chip reset, which can be quite significant. On AR9344 it takes around 4.5 ms. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: optimize ath9k_flushFelix Fietkau
Instead of checking the queues in a loop with hardcoded sleep times inbetween, use a wait queue to trigger queue checks after the tx processing tasklet has run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: optimize ath_drain_all_txqFelix Fietkau
If the software has processed all packets, checking the hardware queue is unnecessary. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: use a timer to put hardware into full sleepFelix Fietkau
When operating in client mode, the short period of time between scanning and associating is often enough to put the hardware through several FULL-SLEEP <-> AWAKE transitions, each wakeup requiring a reset to fully recover the hardware. This is completely unnecessary and can easily be avoided by deferring the switch to full sleep. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix TX IQ calibration for SoC chipsSujith Manoharan
Since calibration data reuse is not enabled in SoC chips, simplify the IQ calibration code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix Carrier Leak calibration for SoC chipsSujith Manoharan
CL calibration is applicable for all chips and the enable/disable knob comes via the INI file. For PCOEM chips, the calibration data is reused when Fast Channel Change is used. Caldata reuse is not enabled for SoC chips, so remove the CL post processing code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Remove unnecessary checkSujith Manoharan
TX IQ calibration is always enabled for SoC chips. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Remove RTT/MCI code from SoC calibrationSujith Manoharan
RTT is enabled only for AR9462 and MCI for AR9462/AR9565. Also, manual peak calibration is not done for any of the SoC chips. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Separate routines for PCOEM and SoC calibrationSujith Manoharan
Though there is some overlap between the calibration mechanisms of PC-OEM cards and SoC chip families, dumping both of them into a single function makes things hard to understand. ar9003_hw_init_cal() is unreadable with chip-specific segments scattered around. To make the logic understandable, use different functions for client cards and SoC chips. Some code is duplicated, but in the long run, it makes the code more maintanable. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: fix SC_OP_INVALID test in ath9k_tx99_init()Dan Carpenter
SC_OP_INVALID is zero so the test is always false. We're supposed to be testing the lowest bit instead. Fixes: 89f927af7f33 ('ath9k: add TX99 support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Apply CUS227 specific TX gain valuesSujith Manoharan
CUS227, which is an AR9340 based card used in Qualcomm's Allplay platforms requires a custom TX gain array, based on the index 7. Add suport for this. Cc: Michael Larson <mlarson@qce.qualcomm.com> Cc: Stephen Collmeyer <scollmey@qce.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Remove pcieSerDesWriteSujith Manoharan
This HW config option is always set to true and is not needed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Remove unused AR9462 2.0 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add SERDES initvals for AR9462 2.1Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add an initialization routine for WoWSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Use CONFIG_ATH9K_WOWSujith Manoharan
Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add a config option for WoWSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix wow.c compilationSujith Manoharan
The HW routines to set various WoW registers are present in wow.c. For some reason, it has been compiled as part of the main ath9k.ko module all this time, when it should really be part of ath9k_hw.ko. This patch renames the file to ar9003_wow.ko and adds it to ath9k_hw.ko. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Fix TX99 config option usageSujith Manoharan
Use CONFIG_ATH9K_TX99 to properly enclose the tx99 code and make sure that it is not compiled as part of the driver when it is not selected. Move the tx99 code to a new file tx99.c and also add ATH9K_DEBUGFS as a dependency in Kconfig. This reduces the module size on platforms like OpenWrt where ATH9K_DEBUGFS is selected, but TX99 might be disabled. Cc: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Identify Killer Wireless cardsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02ath9k: Add WB335 PCI IDsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02cfg80211/mac80211/ath6kl: acquire wdev lock outside ch_switch_notifySimon Wunderlich
The channel switch notification should be sent under the wdev/sdata-lock, preferably in the same moment as the channel change happens, to avoid races by other callers (e.g. start/stop_ap). This also adds the previously missing sdata_lock protection in csa_finalize_work. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02cfg80211: aggregate mgmt_tx parameters into a structAndrei Otcheretianski
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-02mac80211_hwsim: use CLOCK_MONOTONIC_RAWJohannes Berg
The beacon timers really shouldn't use any clock that is subject to adjustments from userspace, particularly not CLOCK_REALTIME. Use CLOCK_MONOTONIC_RAW instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add flags to define country IE processing rulesLuis R. Rodriguez
802.11 cards may have different country IE parsing behavioural preferences and vendors may want to support these. These preferences were managed by the REGULATORY_CUSTOM_REG and the REGULATORY_STRICT_REG flags and their combination. Instead of using this existing notation, split out the country IE behavioural preferences as a new flag. This will allow us to add more customizations easily and make the code more maintainable. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up conflicts] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: claim CCK support for HT clientsKarl Beldan
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: VHT add 160MHz width supportJanusz Dziedzic
Add 160MHz width support. This could be usefull for testing VHT160 DFS functionality. This could be also usefull in the future when DFS and non-DFS channels could be mixed. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: Add iface comb for DFSJanusz Dziedzic
Add iface combination that will allow DFS support. Add also debugfs dfs_simulate_radar file that can be used to simulate radar event. This could be useful for mac80211/cfg80211/ regulatory/hostap code testing without real HW. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: use debugfs_remove_recursiveJanusz Dziedzic
Use debugfs_remove_recursive. That avoids the need for the new dentry pointers and extra debugfs_remove calls. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-21xen-netback: stop the VIF thread before unbinding IRQsDavid Vrabel
If the VIF thread is still running after unbinding the Tx and Rx IRQs in xenvif_disconnect(), the thread may attempt to raise an event which will BUG (as the irq is unbound). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2013-11-21 Please pull this batch of fixes intended for the 3.13 stream! For the Bluetooth bits, Gustavo says: "A few fixes for 3.13. There is 3 fixes to the RFCOMM protocol. One crash fix to L2CAP. A simple fix to a bad behaviour in the SMP protocol." On top of that... Amitkumar Karwar sends a quintet of mwifiex fixes -- two fixes related to failure handling, two memory leak fixes, and a NULL pointer fix. Felix Fietkau corrects and earlier rt2x00 HT descriptor handling fix to address a crash. Geyslan G. Bem fixes a memory leak in brcmfmac. Larry Finger address more pointer arithmetic errors in rtlwifi. Luis R. Rodriguez provides a regulatory fix in the shared ath code. Sujith Manoharan brings a couple ath9k initialization fixes. Ujjal Roy offers one more mwifiex fix to avoid invalid memory accesses when unloading the USB driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-11-20net/phy: Add the autocross feature for forced links on VSC82x4Madalin Bucur
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8662 supportSandeep Singh
Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy Its register set and features are similar to other Vitesse Phys. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8574 supportshaohui xie
The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20net/phy: Add VSC8234 supportAndy Fleming
Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY with SGMII and SERDES MAC interfaces. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Shruti Kanetkar <Shruti@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 05:36:33 +0000