| Age | Commit message (Collapse) | Author |
|---|
|
Helmut reported a bug about division by zero while
running traffic and doing physical cable pull test.
When the cable unplugged the ppms become zero, so when
dividing the current ppms by the previous ppms in the
next dim iteration there is division by zero.
This patch prevent this division for both ppms and epms.
Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism")
Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com>
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for use-after-free in Synaptics RMI4 driver
- correction to multitouch contact tracking on certain ALPS touchpads
(which got broken when we tried to fix the 2-finger scrolling)
- touchpad on Lenovo T640p is switched over to SMbus/RMI
- a few device node refcount fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - prevent UAF reported by KASAN
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
Input: of_touchscreen - add MODULE_LICENSE
Input: 88pm860x-ts - fix child-node lookup
Input: twl6040-vibra - fix child-node lookup
Input: twl4030-vibra - fix sibling-node lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C core: Lixing Wang fixed a refcounting problem
with DT nodes. Jeremy Compostella fixed a buffer overflow possibility
when using a 'don't use' ioctl interface directly"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
i2c: core: decrease reference count of device node in i2c_unregister_device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixlet from Tejun Heo:
"This just adds one more entry for liteon optical drives to the device
blacklist for large IOs.
The change is very low risk"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"We have various small DT fixes, and one important regression fix:
The recent device tree bugfixes that were intended to address issues
that 'dtc' started warning about in 4.15 fixed various USB PHY device
nodes, but it turns out that we had code that depended on those nodes
being incorrect and the probe failing with a particular error code.
With the workaround we can also deal with correct device nodes.
The DT fixes include:
- Allwinner A10 and A20 had the display pipeline set up incorrectly
(introduced in v4.15)
- The Altera PMU lacked an interrupt-parent (never worked)
- Pin muxing on the Openblocks A7 (never worked)
- Clocks might get set up wrong on Armada 7K/8K (4.15 regression)
We now have additional device tree patches to address all the
remaining warnings introduced in 4.15, but decided to queue them for
4.16 instead, to avoid risking another regression like the USB PHY
thing mentioned above.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
phy: work around 'phys' references to usb-nop-xceiv devices
ARM: sunxi_defconfig: Enable CMA
arm64: dts: socfpga: add missing interrupt-parent
ARM: dts: sun[47]i: Fix display backend 1 output to TCON0 remote endpoint
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nouveau, i915, vmwgfx and sun4i regression fixes.
The i915 change fixes a display corruption problem introduced in 4.15,
the nouveau changes are for regressions in 4.15, one of the vmwgfx
fixes goes back a little further, the other is a 4.15 regression fix,
the 3 sun4i changes fix blank HDMI output on those devices"
* tag 'drm-fixes-for-v4.15-rc9' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
|
|
Pull networking fixes from David Miller:
1) Fix BPF divides by zero, from Eric Dumazet and Alexei Starovoitov.
2) Reject stores into bpf context via st and xadd, from Daniel
Borkmann.
3) Fix a memory leak in TUN, from Cong Wang.
4) Disable RX aggregation on a specific troublesome configuration of
r8152 in a Dell TB16b dock.
5) Fix sw_ctx leak in tls, from Sabrina Dubroca.
6) Fix program replacement in cls_bpf, from Daniel Borkmann.
7) Fix uninitialized station_info structures in cfg80211, from Johannes
Berg.
8) Fix miscalculation of transport header offset field in flow
dissector, from Eric Dumazet.
9) Fix LPM tree leak on failure in mlxsw driver, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
ibmvnic: Fix IPv6 packet descriptors
ibmvnic: Fix IP offload control buffer
ipv6: don't let tb6_root node share routes with other node
ip6_gre: init dev->mtu and dev->hard_header_len correctly
mlxsw: spectrum_router: Free LPM tree upon failure
flow_dissector: properly cap thoff field
fm10k: mark PM functions as __maybe_unused
cfg80211: fix station info handling bugs
netlink: reset extack earlier in netlink_rcv_skb
can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
bpf: mark dst unknown on inconsistent {s, u}bounds adjustments
bpf: fix cls_bpf on filter replace
Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than 1500
tls: reset crypto_info when do_tls_setsockopt_tx fails
tls: return -EBUSY if crypto_info is already set
tls: fix sw_ctx leak
net/tls: Only attach to sockets in ESTABLISHED state
net: fs_enet: do not call phy_stop() in interrupts
r8152: disable RX aggregation on Dell TB16 dock
...
|
|
Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt
This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.
However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.
I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).
To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.
Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.
Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
Link: https://patchwork.kernel.org/patch/10158145/
Cc: stable@vger.kernel.org
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Display corruption regression bugfix with both a prep patch and a
follow-up fix
* tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
|
|
Packet descriptor generation for IPv6 is broken.
Properly set L3 and L4 protocol flags for IPv6 descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set some missing fields in the IP control offload buffer. This buffer is
used to enable checksum and TCP segmentation offload in the VNIC server.
The buffer length field and the checksum offloading bits were not set
properly, so fix that here.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thought I'd try my luck getting one more in:
- Two fixes for Tegra (one is to common code, but our userspace doesn't hit it).
- One for NV5x-class MCPs
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
|
|
When a new LPM tree is created, we try to replace the trees in the
existing virtual routers with it. If we fail, the tree needs to be
freed.
Currently, this does not happen in the unlikely case where we fail to
bind the tree to the first virtual router, since its reference count
never transitions from 1 to 0.
Fix that by taking a reference before binding the tree.
Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
|
|
Commit bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
introduced add a teardown helper function for BAR1. During
initialisation of the Nouveau, initially all the teardown helpers are
called once, before calling their init counterparts. For gk20a, after
the BAR1 teardown function is called, the device is hanging during the
initialisation of the FB sub-device. At this point it is unclear why
this is happening and this is still under investigation. However, this
change is preventing Tegra124 devices from booting when Nouveau is
enabled. To allow Tegra124 to boot, remove the teardown helper for
gk20a.
This is based upon a previous patch by Guillaume Tucker but limits
the workaround to only gk20a GPUs.
Fixes: bbb163e18960 ("drm/nouveau/bar: implement bar1 teardown")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
This is obviously wrong in the current code. Make sure to record the
correct size of the arguments and pass the actual arguments to the
nvif_object_map_handle() function.
Suggested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
One last set of fixes for regression submitted during the last few days.
bcma & ssb
* fix older build problems which (apparently) recently became more
frequent in certain MIPS configurations
brcmfmac
* continue driver initialisation even if CLM blob (firmware) file is
not found
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function]
It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.
Fixes: 8249c47c6ba4 ("fm10k: use generic PM hooks instead of legacy PCIe power hooks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KASAN found a UAF due to dangling pointer. As the report below says,
rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in
rmi_irq_fn.
[ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162
[ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2
[ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017
[ 311.424078] Call Trace:
[ 311.424086] dump_stack+0xae/0x12d
[ 311.424090] ? _atomic_dec_and_lock+0x103/0x103
[ 311.424094] ? show_regs_print_info+0xa/0xa
[ 311.424099] ? input_handle_event+0x10b/0x810
[ 311.424104] print_address_description+0x65/0x229
[ 311.424108] kasan_report.cold.5+0xa7/0x281
[ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424123] ? memcpy+0x1f/0x50
[ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core]
[ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core]
[ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core]
[ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424177] ? free_irq+0xa0/0xa0
[ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180
[ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424193] ? irq_thread_fn+0x3d/0x80
[ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180
[ 311.424200] ? irq_thread+0x21d/0x290
[ 311.424203] ? irq_thread_check_affinity+0x170/0x170
[ 311.424207] ? remove_wait_queue+0x150/0x150
[ 311.424212] ? kasan_unpoison_shadow+0x30/0x40
[ 311.424214] ? __init_waitqueue_head+0xa0/0xd0
[ 311.424218] ? task_non_contending.cold.55+0x18/0x18
[ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0
[ 311.424226] ? irq_thread_check_affinity+0x170/0x170
[ 311.424230] ? kthread+0x19e/0x1c0
[ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 311.424237] ? ret_from_fork+0x32/0x40
[ 311.424244] Allocated by task 899:
[ 311.424249] kasan_kmalloc+0xbf/0xe0
[ 311.424252] __kmalloc_track_caller+0xd9/0x1f0
[ 311.424255] kmemdup+0x17/0x40
[ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core]
[ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi]
[ 311.424278] hid_input_report+0x1a8/0x2c0 [hid]
[ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid]
[ 311.424286] irq_thread_fn+0x3d/0x80
[ 311.424288] irq_thread+0x21d/0x290
[ 311.424291] kthread+0x19e/0x1c0
[ 311.424293] ret_from_fork+0x32/0x40
[ 311.424296] Freed by task 1162:
[ 311.424300] kasan_slab_free+0x71/0xc0
[ 311.424303] kfree+0x90/0x190
[ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core]
[ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core]
[ 311.424322] irq_thread_fn+0x3d/0x80
[ 311.424324] irq_thread+0x21d/0x290
[ 311.424327] kthread+0x19e/0x1c0
[ 311.424330] ret_from_fork+0x32/0x40
[ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64
[ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100)
[ 311.424344] The buggy address belongs to the page:
[ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0
[ 311.424353] flags: 0x17ffffc0000100(slab)
[ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a
[ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000
[ 311.424366] page dumped because: kasan: bad access detected
[ 311.424369] Memory state around the buggy address:
[ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
[ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb
[ 311.424384] ^
[ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
Cc: stable@vger.kernel.org
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull two NVMe fixes from Jens Axboe:
"Two important fixes for the sgl support for nvme that is new in this
release"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-pci: take sglist coalescing in dma_map_sg into account
nvme-pci: check segement valid for SGL use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"sdhci-esdhc-imx: Fixup clock to make i.MX53 Loco (IMX53QSB) boot
again"
* tag 'mmc-v4.15-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"This is the (hopefully) last GPIO fix for v4.15, fixing the bit
fiddling in the MMIO GPIO driver.
Again the especially endowed screwer-upper who has been open coding
bit fiddling is yours truly"
* tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mmio: Also read bits that are zero
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Final 4.15 drm-misc pull:
Just 3 sun4i patches to fix clock computation/checks.
* tag 'drm-misc-fixes-2018-01-17' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Last minute fixes for vmwgfx.
One fix for a drm helper warning introduced in 4.15
One important fix for a longer standing memory corruption issue on older
hardware versions.
* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
|
|
1500
In the receive queue for 4096 bytes fragments, the page address
set in the SW data0 field of the descriptor is not the one we got
when doing the reassembly in receive. The page structure was retrieved
from the wrong descriptor into SW data0 which is then causing a
page fault when UDP checksum is accessing data above 1500.
Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-01-16
this is a pull reqeust of a single patch for net/master:
This patch by Stephane Grosjean fixes a potential bug in the packet
fragmentation in the peak USB driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some iommu implementations can merge physically and/or virtually
contiguous segments inside sg_map_dma. The NVMe SGL support does not take
this into account and will warn because of falling off a loop. Pass the
number of mapped segments to nvme_pci_setup_sgls so that the SGL setup
can take the number of mapped segments into account.
Reported-by: Fangjian (Turing) <f.fangjian@huawei.com>
Fixes: a7a7cbe3 ("nvme-pci: add SGL support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@rimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver needs to verify there is a payload with a command before
seeing if it should use SGLs to map it.
Fixes: 955b1b5a00ba ("nvme-pci: move use_sgl initialization to nvme_init_iod()")
Reported-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of TX timeout, fs_timeout() calls phy_stop(), which
triggers the following BUG_ON() as we are in interrupt.
[92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482!
[92708.204985] Oops: Exception in kernel mode, sig: 5 [#1]
[92708.210119] PREEMPT
[92708.212107] CMPC885
[92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 #39
[92708.223227] task: c60f0a40 task.stack: c6104000
[92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8
[92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61)
[92708.241193] MSR: 00021032 <ME,IR,DR,RI>[92708.244818] CR: 24000822 XER: 20000000
[92708.248767]
GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688
GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4
GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000
GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00
NIP [c02a84bc] mdiobus_read+0x20/0x74
[92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4
[92708.286547] Call Trace:
[92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable)
[92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4
[92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c
[92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110
[92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0
[92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c
[92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4
[92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4
[92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40
[92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258
[92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0
[92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64
[92708.354275] Instruction dump:
[92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018
[92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008
[92708.372711] ---[ end trace 42b05441616fafd7 ]---
This patch moves fs_timeout() actions into an async worker.
Fixes: commit 48257c4f168e5 ("Add fs_enet ethernet network driver, for several embedded platforms")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
r8153 on Dell TB15/16 dock corrupts rx packets.
This change is suggested by Realtek. They guess that the XHCI controller
doesn't have enough buffer, and their guesswork is correct, once the RX
aggregation gets disabled, the issue is gone.
ASMedia is currently working on a real sulotion for this issue.
Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16.
Note that TB15 has different bcdDevice and iSerialNumber, which are not
unique values. If you still have TB15, please contact Dell to replace it
with TB16.
BugLink: https://bugs.launchpad.net/bugs/1729674
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tfile->tun could be detached before we close the tun fd,
via tun_detach_all(), so it should not be used to check for
tfile->tx_array.
As Jason suggested, we probably have to clean it up
unconditionally both in __tun_deatch() and tun_detach_all(),
but this requires to check if it is initialized or not.
Currently skb_array_cleanup() doesn't have such a check,
so I check it in the caller and introduce a helper function,
it is a bit ugly but we can always improve it in net-next.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1576d9860599 ("tun: switch to use skb array for tx")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It looks like in all cases 'struct vmw_connector_state' is used. But
only in stdu connectors, was atomic_{duplicate,destroy}_state() properly
subclassed. Leading to writes beyond the end of the allocated connector
state block and all sorts of fun memory corruption related crashes.
Fixes: d7721ca71126 "drm/vmwgfx: Connector atomic state"
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Clark <rclark@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is
greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes
data out of the msgbuf1 array boundary.
It is possible from a user application to run into that issue by
calling the I2C_SMBUS ioctl with data.block[0] greater than
I2C_SMBUS_BLOCK_MAX + 1.
This patch makes the code compliant with
Documentation/i2c/dev-interface by raising an error when the requested
size is larger than 32 bytes.
Call Trace:
[<ffffffff8139f695>] dump_stack+0x67/0x92
[<ffffffff811802a4>] panic+0xc5/0x1eb
[<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30
[<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20
[<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0
[<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490
[<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60
[<ffffffff811f7869>] SyS_ioctl+0x79/0x90
[<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Reference count of device node was increased in of_i2c_register_device,
but without decreasing it in i2c_unregister_device. Then the added
device node will never be released. Fix this by adding the of_node_put.
Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com>
Tested-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
The 4.15 vmwgfx driver shows a warning during boot.
It is caused by a mismatch between the result of vmw_enable_vblank()
and what the drm_atomic_helper expects.
Signed-off by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
Pull rdma fixes from Doug Ledford:
"We had a few more items creep up over the last week. Given we are in
-rc8, these are obviously limited to bugs that have a big downside and
for which we are certain of the fix.
The first is a straight up oops bug that all you have to do is read
the code to see it's a guaranteed 100% oops bug.
The second is a use-after-free issue. We get away lucky if the queue
we are shutting down is empty, but if it isn't, we can end up oopsing.
We really need to drain the queue before destroying it.
The final one is an issue with bad user input causing us to access our
port array out of bounds. While fixing the array out of bounds issue,
it was noticed that the original code did the same thing twice (the
call to rdma_ah_set_port_num()), so its removal is not balanced by a
readd elsewhere, it was already where it needed to be in addition to
where it didn't need to be.
Summary:
- Oops fix in hfi1 driver
- use-after-free issue in iser-target
- use of user supplied array index without proper checking"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix out-of-bound access while querying AH
IB/hfi1: Prevent a NULL dereference
iser-target: Fix possible use-after-free in connection establishment error
|
|
The code for .get_multiple() has bugs:
1. The simple .get_multiple() just reads a register, masks it
and sets the return value. This is not correct: we only want to
assign values (whether 0 or 1) to the bits that are set in the
mask. Fix this by using &= ~mask to clear all bits in the mask
and then |= val & mask to set the corresponding bits from the
read.
2. The bgpio_get_multiple_be() call has a similar problem: it
uses the |= operator to set the bits, so only the bits in the
mask are affected, but it misses to clear all returned bits
from the mask initially, so some bits will be returned
erroneously set to 1.
3. The bgpio_get_set_multiple() again fails to clear the bits
from the mask.
4. find_next_bit() wasn't handled correctly, use a totally
different approach for one function and change the other
function to follow the design pattern of assigning the first
bit to -1, then use bit + 1 in the for loop and < num_iterations
as break condition.
Fixes: 80057cb417b2 ("gpio-mmio: Use the new .get_multiple() callback")
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pull networking fixes from David Miller:
1) Two read past end of buffer fixes in AF_KEY, from Eric Biggers.
2) Memory leak in key_notify_policy(), from Steffen Klassert.
3) Fix overflow with bpf arrays, from Daniel Borkmann.
4) Fix RDMA regression with mlx5 due to mlx5 no longer using
pci_irq_get_affinity(), from Saeed Mahameed.
5) Missing RCU read locking in nl80211_send_iface() when it calls
ieee80211_bss_get_ie(), from Dominik Brodowski.
6) cfg80211 should check dev_set_name()'s return value, from Johannes
Berg.
7) Missing module license tag in 9p protocol, from Stephen Hemminger.
8) Fix crash due to too small MTU in udp ipv6 sendmsg, from Mike
Maloney.
9) Fix endless loop in netlink extack code, from David Ahern.
10) TLS socket layer sets inverted error codes, resulting in an endless
loop. From Robert Hering.
11) Revert openvswitch erspan tunnel support, it's mis-designed and we
need to kill it before it goes into a real release. From William Tu.
12) Fix lan78xx failures in full speed USB mode, from Yuiko Oshino.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
net, sched: fix panic when updating miniq {b,q}stats
qed: Fix potential use-after-free in qed_spq_post()
nfp: use the correct index for link speed table
lan78xx: Fix failure in USB Full Speed
sctp: do not allow the v4 socket to bind a v4mapped v6 address
sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf
sctp: reinit stream if stream outcnt has been change by sinit in sendmsg
ibmvnic: Fix pending MAC address changes
netlink: extack: avoid parenthesized string constant warning
ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY
net: Allow neigh contructor functions ability to modify the primary_key
sh_eth: fix dumping ARSTR
Revert "openvswitch: Add erspan tunnel support."
net/tls: Fix inverted error codes to avoid endless loop
ipv6: ip6_make_skb() needs to clear cork.base.dst
sctp: avoid compiler warning on implicit fallthru
net: ipv4: Make "ip route get" match iif lo rules again.
netlink: extack needs to be reset each time through loop
tipc: fix a memory leak in tipc_nl_node_get_link()
ipv6: fix udpv6 sendmsg crash caused by too small MTU
...
|
|
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before
calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK,
but if it isn't then qed_spq_add_entry() might kfree(p_ent).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sts variable is holding link speed as well as state. We should
be using ls to index into ls_to_ethtool.
Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix initialize the uninitialized tx_qlen to an appropriate value when USB
Full Speed is used.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
More fixes:
* hwsim:
- properly flush deletion works at module unload
- validate # of channels passed from userspace
* cfg80211:
- fix RCU locking regression
- initialize on-stack channel data for nl80211 event
- check dev_set_name() return value
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For legacy chips without CLM blob files, kernel with user helper function
returns -EAGAIN when we request_firmware(), and then driver got failed
when bringing up legacy chips. We expect the CLM blob file for legacy chip
is not existence in firmware path, but the -ENOENT error is transferred to
-EAGAIN in firmware_class.c with user helper.
Because of that, we continue with CLM data currently present in firmware
if getting error from doing request_firmware().
Cc: stable@vger.kernel.org # v4.15.y
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Since commit d41e6858ba58 ("MIPS: Kconfig: Set default MIPS system type
as generic") changed the default MIPS platform to the "generic"
platform, which uses PCI_DRIVERS_GENERIC instead of PCI_DRIVERS_LEGACY,
various files in drivers/ssb/ have failed to build.
This is particularly due to the existence of struct pci_controller being
dependent on PCI_DRIVERS_LEGACY since commit c5611df96804 ("MIPS: PCI:
Introduce CONFIG_PCI_DRIVERS_LEGACY"), so add that dependency to Kconfig
to prevent these files being built for the "generic" platform including
all{yes,mod}config builds.
Fixes: c5611df96804 ("MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY")
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-wireless@vger.kernel.org
Cc: linux-mips@linux-mips.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Mips builds with BCMA host mode enabled fail in mainline and -next
with:
In file included from include/linux/bcma/bcma.h:10:0,
from drivers/bcma/bcma_private.h:9,
from drivers/bcma/main.c:8:
include/linux/bcma/bcma_driver_pci.h:218:24: error:
field 'pci_controller' has incomplete type
Bisect points to commit d41e6858ba58c ("MIPS: Kconfig: Set default MIPS
system type as generic") as the culprit. Analysis shows that the commmit
changes PCI configuration and enables PCI_DRIVERS_GENERIC. This in turn
disables PCI_DRIVERS_LEGACY. 'struct pci_controller' is, however, only
defined if PCI_DRIVERS_LEGACY is enabled.
Ultimately that means that BCMA_DRIVER_PCI_HOSTMODE depends on
PCI_DRIVERS_LEGACY. Add the missing dependency.
Fixes: d41e6858ba58c ("MIPS: Kconfig: Set default MIPS system type as ...")
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Due to architecture limitations, the IBM VNIC client driver is unable
to perform MAC address changes unless the device has "logged in" to
its backing device. Currently, pending MAC changes are handled before
login, resulting in an error and failure to change the MAC address.
Moving that chunk to the end of the ibmvnic_login function, when we are
sure that it was successful, fixes that.
The MAC address can be changed when the device is up or down, so
only check if the device is in a "PROBED" state before setting the
MAC address.
Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters")
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Reviewed-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some rare conditions when running one PEAK USB-FD interface over
a non high-speed USB controller, one useless USB fragment might be sent.
This patch fixes the way a USB command is fragmented when its length is
greater than 64 bytes and when the underlying USB controller is not a
high-speed one.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The rdma_ah_find_type() accesses the port array based on an index
controlled by userspace. The existing bounds check is after the first use
of the index, so userspace can generate an out of bounds access, as shown
by the KASN report below.
==================================================================
BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0
Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409
CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
print_address_description+0xa2/0x350
kasan_report+0x3a5/0x400
to_rdma_ah_attr+0xa8/0x3b0
mlx5_ib_query_qp+0xd35/0x1330
ib_query_qp+0x8a/0xb0
ib_uverbs_query_qp+0x237/0x7f0
ib_uverbs_write+0x617/0xd80
__vfs_write+0xf7/0x500
vfs_write+0x149/0x310
SyS_write+0xca/0x190
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x7fe9c7a275a0
RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0
RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003
RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018
R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000
R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560
Allocated by task 1:
__kmalloc+0x3f9/0x430
alloc_mad_private+0x25/0x50
ib_mad_post_receive_mads+0x204/0xa60
ib_mad_init_device+0xa59/0x1020
ib_register_device+0x83a/0xbc0
mlx5_ib_add+0x50e/0x5c0
mlx5_add_device+0x142/0x410
mlx5_register_interface+0x18f/0x210
mlx5_ib_init+0x56/0x63
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff880019ae2000
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 104 bytes to the right of
512-byte region [ffff880019ae2000, ffff880019ae2200)
The buggy address belongs to the page:
page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
>ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Cc: <stable@vger.kernel.org>
Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ARSTR is always located at the start of the TSU register region, thus
using add_reg() instead of add_tsu_reg() in __sh_eth_get_regs() to dump it
causes EDMR or EDSR (depending on the register layout) to be dumped instead
of ARSTR. Use the correct condition/macro there...
Fixes: 6b4b4fead342 ("sh_eth: Implement ethtool register dump operations")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver lacks a MODULE_LICENSE tag, leading to a Kbuild warning:
WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/cirrus/cs89x0.o
This adds license, author, and description according to the
comment block at the start of the file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
