summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-08drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup.Jeffy Chen
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-2-enric.balletbo@collabora.com
2018-03-08drm/nouveau: Replace the iturbt_709 prop with the standard COLOR_ENCODING propVille Syrjälä
Replace the ad-hoc iturbt_709 property with the new standard COLOR_ENCODING property. Compiles, but not tested. v2: Fix typos (Ilia) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: nouveau@lists.freedesktop.org Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220134816.15229-1-ville.syrjala@linux.intel.com Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
2018-03-07drm/pl111: Use max memory bandwidth for resolutionLinus Walleij
We were previously selecting 1024x768 and 32BPP as the default set-up for the PL111 consumers. This does not work on elder systems: the device tree bindings support a property "max-memory-bandwidth" in bytes/second that states that if you exceed this the memory bus will saturate. The result is flickering and unstable images. Parse the "max-memory-bandwidth" and respect it when intializing the driver. On the RealView PB11MP, Versatile and Integrator/CP we get a nice console as default with this code. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org
2018-03-07drm/bridge: sii902x: Retry status read after DDI I2CLinus Walleij
The following happens when connection a DVI output driven from the SiI9022 using a DVI-to-VGA adapter plug: i2c i2c-0: sendbytes: NAK bailout. i2c i2c-0: sendbytes: NAK bailout. Then no picture. Apparently the I2C engine inside the SiI9022 is not smart enough to try to fall back to DDC I2C. Or the vendor have not integrated the electronics properly. I don't know which one it is. After this, the I2C bus seems stalled and the first attempt to read the status register fails, and the code returns with negative return value, and the display fails to initialized. Instead, retry status readout five times and continue even if this fails. Tested on the ARM Versatile Express with a DVI-to-VGA connector, it now gives picture. Introduce a helper struct device *dev variable to make the code more readable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org
2018-03-07drm/pl111: Handle the RealView variant separatelyLinus Walleij
We want to cut down the default bpp to 16 on the RealView so we can have a 1024x768 framebuffer console by default. The memory bandwidth limitations makes this not work with the PL111 default of 32bpp. This builds on top of the earlier patches making the framebuffer default bpp a per-variant variable. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180302090948.6399-4-linus.walleij@linaro.org
2018-03-07drm/pl111: Make the default BPP a per-variant variableLinus Walleij
The PL110, Integrator and Versatile boards strongly prefer to use 16 BPP even if other modes are supported, both to keep down memory consumption and also to easier find a good match to supported resolutions with consideration taken to the memory bandwidth of the platforms. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180302090948.6399-2-linus.walleij@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20180307084316.23623-1-linus.walleij@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20180307084316.23623-1-linus.walleij@linaro.org
2018-03-07bridge: Elaborate a bit on dumb VGA bridges in KconfigLinus Walleij
It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180302091426.8463-1-linus.walleij@linaro.org
2018-03-07drm: Reject bad property flag combinationsVille Syrjälä
Pimp drm_property_type_valid() to check for more fails with the property flags. Also make the check before adding the property, and bail out if things look bad. Since we're now chekcing for more than the type let's also change the function name to drm_property_flags_valid(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306164849.2862-6-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-07drm: Make property flags u32Ville Syrjälä
The property flags are part of the uabi and we have 32 bits for them. Pass them around as u32 internally as well, instead of a signed int. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306164849.2862-5-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-07drm: WARN when trying to add enum value > 63 to a bitmask propertyVille Syrjälä
Enum values >63 with a bitmask property is a programmer error. WARN when someone is attempting this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306164849.2862-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-07drm: WARN when trying add enum values to non-enum/bitmask propertiesVille Syrjälä
Trying to add enum values to non-enum/bitmask properties is a programmer mistake. WARN to make sure the developers notice their mistake. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306164849.2862-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-07drm: Reject replacing property enum valuesVille Syrjälä
If the property already has the enum value WARN and bail. Replacing enum values doesn't make sense to me. Throw out the pointless list_empty() while at it. Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180306164849.2862-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-07drm/bridge: analogix_dp: Don't create useless connectorsMarek Szyprowski
If there is another bridge after analogix_dp, then the connector object should not be created. This fixes following timeouts on Exynos5420-based Chromebook2 Peach-PIT board during boot: exynos-dp 145b0000.dp-controller: AUX CH cmd reply timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! exynos-dp 145b0000.dp-controller: AUX CH enable timeout! Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-4-m.szyprowski@samsung.com
2018-03-07drm/bridge: analogix_dp: Postpone enabling runtime power managementMarek Szyprowski
Enabling runtime power management early in analogix_dp_bind() causes following kernel NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 000007d8 pgd = 28ffa2e4 [000007d8] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 6 PID: 69 Comm: kworker/6:1 Not tainted 4.16.0-rc1-00062-ge25751974ba8 #3622 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at analogix_dp_resume+0x8/0xc0 LR is at pm_generic_runtime_resume+0x2c/0x38 pc : [<c0531b98>] lr : [<c0543fec>] psr: a0000113 sp : ee13fbd8 ip : 0000001a fp : 00000001 r10: ee0eb080 r9 : c0552bd8 r8 : c0fb1d98 r7 : eebb1010 r6 : eeae9808 r5 : 00000000 r4 : d4850415 r3 : ee0ed010 r2 : b2d05e00 r1 : 00000000 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 2000406a DAC: 00000051 Process kworker/6:1 (pid: 69, stack limit = 0x913205b4) Stack: (0xee13fbd8 to 0xee140000) ... [<c0531b98>] (analogix_dp_resume) from [<c0543fec>] (pm_generic_runtime_resume+0x2c/0x38) [<c0543fec>] (pm_generic_runtime_resume) from [<c054ffb4>] (__genpd_runtime_resume+0x2c/0x8c) [<c054ffb4>] (__genpd_runtime_resume) from [<c0552d24>] (genpd_runtime_resume+0x14c/0x258) [<c0552d24>] (genpd_runtime_resume) from [<c0547798>] (__rpm_callback+0x134/0x214) [<c0547798>] (__rpm_callback) from [<c0547898>] (rpm_callback+0x20/0x80) [<c0547898>] (rpm_callback) from [<c0546ff4>] (rpm_resume+0x3a0/0x734) [<c0546ff4>] (rpm_resume) from [<c05475ec>] (__pm_runtime_resume+0x64/0x9c) [<c05475ec>] (__pm_runtime_resume) from [<c053b95c>] (__device_attach+0x8c/0x134) [<c053b95c>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c05390d0>] (device_add+0x3a8/0x580) [<c05390d0>] (device_add) from [<c06764c4>] (i2c_register_adapter+0xd4/0x3ec) [<c06764c4>] (i2c_register_adapter) from [<c05321c8>] (analogix_dp_bind+0x2a0/0x410) [<c05321c8>] (analogix_dp_bind) from [<c0528e90>] (exynos_dp_bind+0x9c/0x12c) [<c0528e90>] (exynos_dp_bind) from [<c0535bc4>] (component_bind_all+0xfc/0x258) [<c0535bc4>] (component_bind_all) from [<c0522ee8>] (exynos_drm_bind+0x15c/0x28c) [<c0522ee8>] (exynos_drm_bind) from [<c0536378>] (try_to_bring_up_master+0x1b8/0x29c) [<c0536378>] (try_to_bring_up_master) from [<c05364fc>] (component_add+0xa0/0x170) [<c05364fc>] (component_add) from [<c0528fe4>] (exynos_dp_probe+0x64/0xb8) [<c0528fe4>] (exynos_dp_probe) from [<c053debc>] (platform_drv_probe+0x50/0xb0) [<c053debc>] (platform_drv_probe) from [<c053bd18>] (driver_probe_device+0x2b8/0x4a0) [<c053bd18>] (driver_probe_device) from [<c0539e4c>] (bus_for_each_drv+0x44/0x8c) [<c0539e4c>] (bus_for_each_drv) from [<c053b970>] (__device_attach+0xa0/0x134) [<c053b970>] (__device_attach) from [<c053ad08>] (bus_probe_device+0x88/0x90) [<c053ad08>] (bus_probe_device) from [<c053b258>] (deferred_probe_work_func+0x3c/0x168) [<c053b258>] (deferred_probe_work_func) from [<c014352c>] (process_one_work+0x1d0/0x7bc) [<c014352c>] (process_one_work) from [<c0143b84>] (worker_thread+0x34/0x4dc) [<c0143b84>] (worker_thread) from [<c014a30c>] (kthread+0x128/0x164) [<c014a30c>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee13ffb0 to 0xee13fff8) ffa0: 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e2800e37 eafee601 e92d4070 e1a05000 (e59067d8) ---[ end trace bf6046013df7cab2 ]--- This oops happens, because analogix_dp_bind() calls drm_dp_aux_register() which registers i2c adapter. I2C core tries to runtime get i2c host device during registration. This ends in analogix_dp_resume(), but dp context is NULL there. dp context is set in exynos_dp_bind() after executing analogix_dp_bind(). Fix this issue by postponing enabling runtime power management after drm_dp_aux_register(). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-3-m.szyprowski@samsung.com
2018-03-07drm/bridge: analogix_dp: Don't power bridge in analogix_dp_bindzain wang
The bridge does not need to be powered in analogix_dp_bind(), so remove the calls to pm_runtime_get()/phy_power_on()/analogix_dp_init_dp() as well as their power-off counterparts. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> [the patch originally just removed the power_on portion, seanpaul removed the power off code as well as improved the commit message] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-2-m.szyprowski@samsung.com
2018-03-06drm/prime: make the pages array optional for drm_prime_sg_to_page_addr_arraysChristian König
Most of the time we only need the dma addresses. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180227115000.4105-2-christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20180227115000.4105-3-christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20180227115000.4105-4-christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20180227115000.4105-5-christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/BN6PR12MB18262C0DE9B5F07B9A42EAE7F2C60@BN6PR12MB1826.namprd12.prod.outlook.com
2018-03-06drm/prime: fix potential race in drm_gem_map_detachChristian König
Unpin the GEM object only after freeing the sg table. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180227115000.4105-1-christian.koenig@amd.com
2018-03-06drm: Check property/enum name lengthVille Syrjälä
Reject requests to add properties/enums with an overly long name. Previously we would have just silently truncated the string and exposed it userspace. v2: drm_property_create() returns a pointer Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302140300.31110-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-06drm: Don't create properties without namesVille Syrjälä
Creating a property that doesn't have a name makes no sense to me. Don't allow it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302132544.12491-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-06drm: bridge: dw-hdmi: Fix overflow workaround for Amlogic Meson GX SoCsNeil Armstrong
The Amlogic Meson GX SoCs, embedded the v2.01a controller, has been also identified needing this workaround. This patch adds the corresponding version to enable a single iteration for this specific version. Fixes: be41fc55f1aa ("drm: bridge: dw-hdmi: Handle overflow workaround based on device version") Acked-by: Archit Taneja <architt@codeaurora.org> [narmstrong: s/identifies/identified and rebased against Jernej's change] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519386277-25902-1-git-send-email-narmstrong@baylibre.com
2018-03-06drm: of: simplify component probe codeBaruch Siach
Use positive logic for better readability. This also eliminates one of_node_put() call, making the code shorter. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Archit Taneja <archit@cradlewise.com> Link: https://patchwork.freedesktop.org/patch/msgid/61c56895d44117d80e7d82f04e729e29c60fadbd.1519327370.git.baruch@tkos.co.il
2018-03-06drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problemJoe Moriarty
The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer dereference problem. - drivers/gpu/drm/drm_drv.c Any calls to drm_minor_get_slot() could result in the return of a NULL pointer when an invalid DRM device type is encountered. The return of NULL was removed with BUG() from drm_minor_get_slot(). Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180220191157.100960-3-joe.moriarty@oracle.com
2018-03-06drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problemJoe Moriarty
The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_vblank.c Null pointer checks were added to return values from calls to drm_crtc_from_index(). There is a possibility, however minute, that crtc->index may not be found when trying to find the struct crtc from it's assigned index given in drm_crtc_init_with_planes(). 3 return checks for NULL where added with a call to WARN_ON(!crtc). Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180220191157.100960-2-joe.moriarty@oracle.com
2018-03-05drm: Don't pass clip to drm_atomic_helper_check_plane_state()Ville Syrjälä
Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2018-03-05drm/armada: Use drm_mode_get_hv_timing() to populate plane clip rectangleVille Syrjälä
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle. Since armada isn't atomic we'll use crtc->enabled and crtc->mode instead of the stuff under crtc_state. Once everyone agrees on how the clip rectangle gets set up we can move the code into drm_atomic_helper_check_plane_state(). Cc: Dave Airlie <airlied@redhat.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com>
2018-03-05drm/armada: Construct a temporary crtc state for plane checksVille Syrjälä
As armada isn't an atomic driver trying to pass a non-populated crtc->state to drm_atomic_helper_check_plane_state() will end in tears. Construct a temporary crtc state a la drm_plane_helper_check_update() and pass that instead. For now we just really need crtc_state->enable to be there. Cc: Dave Airlie <airlied@redhat.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com>
2018-03-05drm/vc4: Replace long HDMI udelay with usleep_rangeStefan Wahren
Since we aren't in atomic context replace this long udelay with a usleep_range. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1519475894-11701-1-git-send-email-stefan.wahren@i2se.com
2018-03-05drm/vc4: Advertise supported modifiers for planesDaniel Stone
The IN_FORMATS blob allows the kernel to advertise to userspace which format/modifier combinations are supported, per plane. Use this to advertise that we support both T_TILED and linear. v2: - Only advertise T_TILED for RGB (Eric) - Actually turn on allow_fb_modifiers (Eric) Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/170828/
2018-03-05drm/bridge/synopsys: dsi: readl_poll_timeout return value clean upPhilippe CORNU
The readl_poll_timeout() return value is 0 in case of success so it is better to detect errors without taking care of the return value sign. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180204213624.18288-1-philippe.cornu@st.com
2018-03-05drm/atomic: Call ww_acquire_done after drm_modeset_lock_allMaarten Lankhorst
After we acquired all generic modeset locks in drm_modeset_lock_all, it's unsafe acquire any other so just mark acquisition as done. Atomic drivers shouldn't use drm_modeset_lock_all. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221152331.9212-1-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com>
2018-03-02drm/i915: Add support for the YCbCr COLOR_RANGE propertyVille Syrjälä
Add support for the COLOR_RANGE property on planes. This property selects whether the input YCbCr data is to treated as limited range or full range. On most platforms this is a matter of setting the "YUV range correction disable" bit, and on VLV/CHV we'll just have to program the color correction logic to pass the data through unmodified. v2: Rebase Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-9-ville.syrjala@linux.intel.com
2018-03-02drm/i915: Change the COLOR_ENCODING prop default value to BT.709Ville Syrjälä
Bring us forward from the stone age and switch our default YCbCr->RGB conversion matrix to BT.709 from BT.601. I would expect most matrial to be BT.709 these days. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Acked-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-8-ville.syrjala@linux.intel.com
2018-03-02drm/i915: Add support for the YCbCr COLOR_ENCODING propertyVille Syrjälä
Add support for the COLOR_ENCODING plane property which selects the matrix coefficients used for the YCbCr->RGB conversion. Our hardware can generally handle BT.601 and BT.709. CHV pipe B sprites have a fully programmable matrix, so in theory we could handle anything, but it doesn't seem all that useful to expose anything beyond BT.601 and BT.709 at this time. GLK can supposedly do BT.2020, but let's leave enabling that for the future as well. v2: Rename bit defines to match the spec more closely (Shashank) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-7-ville.syrjala@linux.intel.com
2018-03-02drm/i915: Fix plane YCbCr->RGB conversion for GLKVille Syrjälä
On GLK the plane CSC controls moved into the COLOR_CTL register. Update the code to progam the YCbCr->RGB CSC mode correctly when faced with an YCbCr framebuffer. The spec is rather confusing as it calls the mode "YUV601 to RGB709". I'm going to assume that just means it's going to use the YCbCr->RGB matrix as specified in BT.601 and doesn't actually change the gamut. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-6-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2018-03-02drm/i915: Correctly handle limited range YCbCr data on VLV/CHVVille Syrjälä
Turns out the VLV/CHV fixed function sprite CSC expects full range data as input. We've been feeding it limited range data to it all along. To expand the data out to full range we'll use the color correction registers (brightness, contrast, and saturation). On CHV pipe B we were actually doing the right thing already because we progammed the custom CSC matrix to do expect limited range input. Now that well pre-expand the data out with the color correction unit, we need to change the CSC matrix to operate with full range input instead. This should make the sprite output of the other pipes match the sprite output of pipe B reasonably well. Looking at the resulting pipe CRCs, there can be a slight difference in the output, but as I don't know the formula used by the fixed function CSC of the other pipes, I don't think it's worth the effort to try to match the output exactly. It might not even be possible due to difference in internal precision etc. One slight caveat here is that the color correction registers are single bufferred, so we should really be updating them during vblank, but we still don't have a mechanism for that, so just toss in another FIXME. v2: Rebase v3: s/bri/brightness/ s/con/contrast/ (Shashank) v4: Clarify the constants and math (Shashank) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Tang, Jun" <jun.tang@intel.com> Reported-by: "Tang, Jun" <jun.tang@intel.com> Cc: stable@vger.kernel.org Fixes: 7f1f3851feb0 ("drm/i915: sprite support for ValleyView v4") Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-5-ville.syrjala@linux.intel.com
2018-03-02drm/atomic: Include color encoding/range in plane state dumpVille Syrjälä
Include color_enconding and color_range in the plane state dump. v2: Add kerneldoc (danvet) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202846.10628-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com>
2018-03-02drm: Add optional COLOR_ENCODING and COLOR_RANGE properties to drm_planeJyri Sarha
Add a standard optional properties to support different non RGB color encodings in DRM planes. COLOR_ENCODING select the supported non RGB color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects the value ranges within the selected color encoding. The properties are stored to drm_plane object to allow different set of supported encoding for different planes on the device. v2: Add/fix kerneldocs, verify bitmasks (danvet) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> [vsyrjala v2: Add/fix kerneldocs, verify bitmasks] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-02drm/sun4i: Allow building on arm64Jernej Skrabec
64-bit ARM SoCs from Allwinner have DE2/TCON/HDMI periphery which is compatible to 32-bit SoCs, so allow building DRM driver for arm64 architecture. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-14-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for H3 HDMI PHY variantJernej Skrabec
While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3 HDMI PHY is completely custom PHY. However, they still have many things in common like clock and reset setup, setting sync polarity and more. Add support for H3 HDMI PHY variant. While documentation exists for this PHY variant, it doesn't go in great details. Because of that, almost all settings are copied from BSP linux 4.4. Interestingly, those settings are slightly different to those found in a older BSP with Linux 3.4. For now, no user visible difference was found between them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Move and expand DW HDMI PHY register macrosJernej Skrabec
DW HDMI PHY macros are moved to header file and expanded with the registers present on newer SoCs like H3 and H5. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-12-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for variants to DW HDMI PHYJernej Skrabec
There are multiple variants of DW HDMI PHYs in Allwinner SoCs. While some things like clock and reset setup are the same, PHY configuration differs a lot. Split out code which is PHY specific to separate functions and create a structure which holds pointers to those functions. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-11-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Fix polarity configuration for DW HDMI PHYJernej Skrabec
Current polarity configuration code is cleary wrong since it compares same flag two times. However, even if flag name is fixed, it won't work well for resolutions which have one polarity positive and another negative. Fix that by properly set each bit according to each polarity. Since those two bits are not described in any documentation, relationships were obtained by experimentation. Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-10-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for H3 mixer 0Jernej Skrabec
This mixer supports 1 VI plane, 3 UI plane and HW scaling on all planes. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-9-jernej.skrabec@siol.net
2018-03-02drm/sun4i: Add support for H3 display engineJernej Skrabec
H3 display engine has two mixers which are connected to HDMI and TV output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-8-jernej.skrabec@siol.net
2018-03-01drm/rockchip: analogix_dp: reorder psr_unregister call in unbindJeffy Chen
In bind the psr handler gets registered first before the core analogix_dp_bind() gets called. So it should be the other way around in unbind, first unbind the analogix_dp and then unregister the psr. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
2018-03-01drm/rockchip: analogix_dp: Add a sanity check for rockchip_drm_psr_register()Jeffy Chen
The rockchip_drm_psr_register() can fail, so add a sanity check for that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> [moved psr_unregister reordering in unbind to separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix_dp: Fix connector and encoder cleanupJeffy Chen
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix: Do not use device's drvdataJeffy Chen
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
2018-03-01drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()Jeffy Chen
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb and cbcr. So the cbcr's vskiplines might be an unexpected value if the second scl_vop_cal_scale() didn't update it. Init vskiplines in scl_vop_cal_scale() to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com
2018-03-01drm/rockchip: Add device links for master and componentsJeffy Chen
Since we are trying to access components' resources in the master's suspend/resume PM callbacks(e.g. panel), add device links to correct the suspend/resume and shutdown ordering. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-24 18:37:12 +0000