summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-11-16Merge branches 'hfi1' and 'mlx' into k.o/for-4.9-rcDoug Ledford
2016-11-16IB/rxe: Update qp state for user queryYonatan Cohen
The method rxe_qp_error() transitions QP to error state and make sure the QP is drained. It did not though update the QP state for user's query. This patch fixes this. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Clear queue buffer when modifying QP to resetYonatan Cohen
RXE resets the send-q only once in rxe_qp_init_req() when QP is created, but when the QP is reused after QP reset, the send-q holds previous garbage data. This garbage data wrongly fails CQEs that otherwise should have completed successfully. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Fix handling of erroneous WRYonatan Cohen
To correctly handle a erroneous WR this fix does the following 1. Make sure the bad WQE causes a user completion event. 2. Call rxe_completer to handle the erred WQE. Before the fix, when rxe_requester found a bad WQE, it changed its status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs. If this was the 1st WQE then there would be no ACK to invoke the completer and this bad WQE would be stuck in the QP's send-q. On top of that the requester exiting with 0 caused rxe_do_task to endlessly invoke rxe_requester, resulting in a soft-lockup attached below. In case the WQE was not the 1st and rxe_completer did get a chance to handle the bad WQE, it did not cause a complete event since the WQE's IB_SEND_SIGNALED flag was not set. Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec version 1.2.1, section 10.7.3.1 Signaled Completions. NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe] [<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe] [<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe] [<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe] [<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60 [<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe] [<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe] [<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe] [<ffffffff811ef922>] ? __kmalloc+0x182/0x200 [<ffffffff816ba512>] ? down_read+0x12/0x40 [<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs] [<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80 [<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs] [<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0 [<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50 [<ffffffff81215b87>] __vfs_write+0x37/0x140 [<ffffffff81216892>] vfs_write+0xb2/0x1b0 [<ffffffff81217ce5>] SyS_write+0x55/0xc0 [<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksumYonatan Cohen
Missing initialization of udp_tunnel_sock_cfg causes to following kernel panic, while kernel tries to execute gro_receive(). While being there, we converted udp_port_cfg to use the same initialization scheme as udp_tunnel_sock_cfg. ------------[ cut here ]------------ kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffffffa0588c50 IP: [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163 Oops: 0011 [#1] SMP Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000 RIP: 0010:[<ffffffffa0588c50>] [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP: 0018:ffff880237343c80 EFLAGS: 00010282 RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712 RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00 RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262 R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578 FS: 0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0 Stack: ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014 000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb 0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000 Call Trace: <IRQ> [<ffffffff8160860e>] ? udp_gro_receive+0xde/0x130 [<ffffffff816088fb>] udp4_gro_receive+0x10b/0x2d0 [<ffffffff81611373>] inet_gro_receive+0x1d3/0x270 [<ffffffff81594e29>] dev_gro_receive+0x269/0x3b0 [<ffffffff81595188>] napi_gro_receive+0x38/0x120 [<ffffffffa011caee>] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core] [<ffffffffa011d076>] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core] [<ffffffffa011d7ae>] mlx5e_napi_poll+0x8e/0x400 [mlx5_core] [<ffffffff815949a0>] net_rx_action+0x160/0x380 [<ffffffff816a9197>] __do_softirq+0xd7/0x2c5 [<ffffffff81085c35>] irq_exit+0xf5/0x100 [<ffffffff816a8f16>] do_IRQ+0x56/0xd0 [<ffffffff816a6dcc>] common_interrupt+0x8c/0x8c <EOI> [<ffffffff81061f96>] ? native_safe_halt+0x6/0x10 [<ffffffff81037ade>] default_idle+0x1e/0xd0 [<ffffffff8103828f>] arch_cpu_idle+0xf/0x20 [<ffffffff810c37dc>] default_idle_call+0x3c/0x50 [<ffffffff810c3b13>] cpu_startup_entry+0x323/0x3c0 [<ffffffff81050d8c>] start_secondary+0x15c/0x1a0 RIP [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP <ffff880237343c80> CR2: ffffffffa0588c50 ---[ end trace 489ee31fa7614ac5 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ------------[ cut here ]------------ Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx4: Fix create CQ error flowMatan Barak
Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx4: Check gid_index return valueDaniel Jurgens
Check the returned GID index value and return an error if it is invalid. Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix NULL pointer dereference on debug printEli Cohen
For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix fatal error dispatchingEli Cohen
When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Resolve soft lock on massive reg MRsMoshe Lazer
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes and MR caches can't supply the required amount of MRs the slow-path of MR allocation may be used. In this case we need to serialize the slow-path between the processes to avoid soft lock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Use cache line size to select CQE strideDaniel Jurgens
When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Validate requested RQT sizeMaor Gottlieb
Validate that the requested size of RQT is supported by firmware. Fixes: c5f9092936fe ('IB/mlx5: Add Receive Work Queue Indirection table operations') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/mlx5: Fix memory leak in query deviceMajd Dibbiny
We need to free dev->port when we fail to enable RoCE or initialize node data. Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Avoid unsigned int overflow in sg_alloc_tableMark Bloch
sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Add missing check for addr_resolve callback return valueMark Bloch
When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh, the return status of the request was ignored in the callback function causing a successful return and an empty dmac. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/core: Set routable RoCE gid type for ipv4/ipv6 networksLeon Romanovsky
On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote: > From: Mark Bloch <markb@mellanox.com> > > If the underlying netowrk type is ipv4 or ipv6 and the device supports > routable RoCE, prefer it so the traffic could cross subnets. > > Signed-off-by: Mark Bloch <markb@mellanox.com> > Signed-off-by: Maor Gottlieb <maorg@mellanox.com> > Signed-off-by: Leon Romanovsky <leon@kernel.org> > --- Hi Doug, Please take the following v1 of this patch where I fixed spelling error from "netowrk" to be "network". Thanks. >From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001 From: Mark Bloch <markb@mellanox.com> Date: Sun, 11 Sep 2016 06:25:10 +0000 Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6 networks If the underlying network type is ipv4 or ipv6 and the device supports routable RoCE, prefer it so the traffic could cross subnets. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/cm: Mark stale CM id's whenever the mad agent was unregisteredMark Bloch
When there is a CM id object that has port assigned to it, it means that the cm-id asked for the specific port that it should go by it, but if that port was removed (hot-unplug event) the cm-id was not updated. In order to fix that the port keeps a list of all the cm-id's that are planning to go by it, whenever the port is removed it marks all of them as invalid. This commit fixes a kernel panic which happens when running traffic between guests and we force reboot a guest mid traffic, it triggers a kernel panic: Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff8152b534>] ? oops_end+0xe4/0x100 [<ffffffff8104a00b>] ? no_context+0xfb/0x260 [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30 [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81084240>] ? process_timeout+0x0/0x10 [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20 [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480 [<ffffffff81065df0>] ? default_wake_function+0x0/0x20 [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core] [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core] [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0 [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0 [<ffffffff8152a815>] ? page_fault+0x25/0x30 [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm] [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm] [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm] [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm] [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib] [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib] [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib] [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0 [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0 [<ffffffff8109aef6>] ? kthread+0x96/0xa0 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/uverbs: Fix leak of XRC target QPsTariq Toukan
The real QP is destroyed in case of the ref count reaches zero, but for XRC target QPs this call was missed and caused to QP leaks. Let's call to destroy for all flows. Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-17Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a few bug fixes for 4.9. The big one is Mario's prime fencing fix. * 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu:fix vpost_needed routine drm/amdgpu/powerplay: drop a redundant NULL check drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)
2016-11-17Merge branch 'mediatek-drm-fixes-2016-11-11' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes This branch include one patch to fix a typo, two patches to disable vblank interrupt, and three patches to support HDMI 4K resolution. * 'mediatek-drm-fixes-2016-11-11' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range drm/mediatek: enhance the HDMI driving current drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable drm/mediatek: clear IRQ status before enable OVL interrupt drm/mediatek: set vblank_disable_allowed to true drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE
2016-11-16net/phy/vitesse: Configure RGMII skew on VSC8601, if neededAlex
With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The VSC8601 can handle this internally. While the VSC8601 can set more fine-grained delays, the standard skew settings work out of the box. The same heuristic is used to determine when this skew should be enabled as in vsc824x_config_init(). Tested on custom board with AM3352 SOC and VSC801 PHY. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16cxgb4: do not call napi_hash_del()Eric Dumazet
Calling napi_hash_del() before netif_napi_del() is dangerous if a synchronize_rcu() is not enforced before NAPI struct freeing. Lets leave this detail to core networking stack and feel more comfortable. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hariprasad S <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16be2net: do not call napi_hash_del()Eric Dumazet
Calling napi_hash_del() before netif_napi_del() is dangerous if a synchronize_rcu() is not enforced before NAPI struct freeing. Lets leave this detail to core networking stack and feel more comfortable. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16virtio-net: add a missing synchronize_net()Eric Dumazet
It seems many drivers do not respect napi_hash_del() contract. When napi_hash_del() is used before netif_napi_del(), an RCU grace period is needed before freeing NAPI object. Fixes: 91815639d880 ("virtio-net: rx busy polling support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16gpio: Remove GPIO_DEVRES optionKeno Fischer
This option was added in 6a89a314ab107a12af08c71420c19a37a30fc2d3 to allow use of the devm_gpio_* functions without CONFIG_GPIOLIB. However, only a few months later in b69ac52449c658b7ac40034dc3c5f5f4a71a723d, CONFIG_GPIOLIB was added as a dependency, defeating the original purpose of this option. Instead of that patch, the original commit could have just been reverted (and in fact was partially so in 403c1d0be5ccbd750d25c59d8358843a81e52e3b). Further, since this option has a dependency on HAS_IOMEM, even though it does not require it, it causes build failures when !HAS_IOMEM (e.g. in a uml build). Fix that by completely removing the option, in essence completing the reversion of the original commit. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-16nvme/pci: Don't free queues on errorKeith Busch
The nvme_remove function tears down all allocated resources in the correct order, so no need to free queues on error during initialization. This fixes possible use-after-free errors when queues are still associated with a blk-mq hctx. Reported-by: Scott Bauer <scott.bauer@intel.com> Tested-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-16Merge tag 'sunxi-clk-fixes-for-4.9' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes Pull Allwinner clock fixes from Maxime Ripard: Two fixes, one for the old clock code, one for the new implementation. * tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi: Fix M factor computation for APB1 clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent
2016-11-16clk: efm32gg: Pass correct type to hw provider registrationStephen Boyd
Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9337631f52a8 ("clk: efm32gg: Migrate to clk_hw based OF and registration APIs") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-16clk: berlin: Pass correct type to hw provider registrationStephen Boyd
Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jisheng Zhang <jszhang@marvell.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Fixes: f6475e298297 ("clk: berlin: Migrate to clk_hw based registration and OF APIs") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-16net: thunderx: Fix memory leak and other issues upon interface toggleSunil Goutham
This patch fixes the following 1. When interface is being teardown and queues are being cleaned up, free pending SKBs that are in SQ which are either not transmitted or freed as NAPI is disabled by that time. 2. While interface initialization, delay CFG_DONE notification till the end to avoid corner cases where TXQs are enabled but CQ interrupts are not which results blocking transmission and kicking off watchdog. 3. Check for IFF_UP while re-enabling RBDR interrupts from tasklet. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: thunderx: Fix VF driver's interface statisticsSunil Goutham
This patch fixes multiple issues 1. Convert all driver statistics to percpu counters for accuracy. 2. To avoid multiple CQEs posted by a TSO packet appended to HW, TSO pkt's SQE has 'post_cqe' not set but a dummy SQE is added for getting HW transmit completion notification. This dummy SQE has 'dont_send' set and HW drops the pkt pointed to in this thus Tx drop counter increases. This patch fixes this by subtracting SW tx tso counter from HW Tx drop counter for actual packet drop counter. 3. Reset all individual queue's and VNIC HW stats when interface is going down. 4. Getrid off unnecessary counters in hot path. 5. Bringout all CQE error stats i.e both Rx and Tx. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: thunderx: Fix configuration of L3/L4 length checkingSunil Goutham
This patch fixes enabling of HW verification of L3/L4 length and TCP/UDP checksum which is currently being cleared. Also fixed VLAN stripping config which is being cleared when multiqset is enabled. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: thunderx: Program LMAC credits based on MTUSunil Goutham
Programming LMAC credits taking 9K frame size by default is incorrect as for an interface which is one of the many on the same BGX/QLM no of credits available will be less as Tx FIFO will be divided across all interfaces. So let's say a BGX with 40G interface and another BGX with multiple 10G, bandwidth of 10G interfaces will be effected when traffic is running on both 40G and 10G interfaces simultaneously. This patch fixes this issue by programming credits based on netdev's MTU. Also fixed configuring MTU to HW and added CQE counter for pkts which exceed this value. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: thunderx: Introduce BGX_ID_MASK macro to extract bgx_idRadha Mohan Chintakuntla
This patch fixes the 'bgx_id' determination on 83xx where there are 4 BGX blocks instead of 2 on other platforms. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16Merge tag 'mfd-fixes-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: - Fix PCI properties in intel-lpss-pci - Fix Resetting issue during suspend in intel-lpss-pci - Seperate IRQs for USBC device and CHRG in intel_soc_pmic_bxtwc - Add timeout to fix Resetting issue in stmpe - Ensure we 'put' reference to device when done in mfd-core * tag 'mfd-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: core: Fix device reference leak in mfd_clone_cell mfd: stmpe: Fix RESET regression on STMPE2401 mfd: intel_soc_pmic_bxtwc: Fix usbc interrupt mfd: intel-lpss: Do not put device in reset state on suspend mfd: lpss: Fix Intel Kaby Lake PCH-H properties
2016-11-16mfd: core: Fix device reference leak in mfd_clone_cellJohan Hovold
Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: stmpe: Fix RESET regression on STMPE2401Linus Walleij
Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028 ("mfd: stmpe: Add reset support for all STMPE variant") we're resetting the STMPE expanders before use. This caused a regression on the STMP2401 on the Nomadik NHK8815: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission It turns out that we start to poll for the reset bit to go low again too quickly: the STMPE2401 is not yet online and ready to be asked for the status of the RESET bit. By introducing a 10ms delay before starting to hammer the register for information, we get back to normal: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 Cc: stable@vger.kernel.org Cc: Amelie Delaunay <amelie.delaunay@st.com> Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel_soc_pmic_bxtwc: Fix usbc interruptHeikki Krogerus
The wcove USB Type-C driver is currently being flooded with interrupts that are not targeted to it. The reason for that is because all CHRG first level interrupts are mapped to it. This fixes the issue by introducing separate irq for the usbc device, and mapping only USB Type-C PHY interrupts to it. Fixes: 9c6235c86332 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel-lpss: Do not put device in reset state on suspendAzhar Shaikh
Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Cc: stable@vger.kernel.org Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: lpss: Fix Intel Kaby Lake PCH-H propertiesJarkko Nikula
There are a few issues on Intel Kaby Lake PCH-H properties added by commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"): - Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not 133 MHz. This was probably copy-paste error from Intel Broxton I2C properties. - There is no default I2C SDA hold time specified which is used when ACPI doesn't provide it. I got information from Windows driver team that Kaby Lake PCH-H can use the same configuration than Intel Sunrisepoint PCH. - Common HS-UART properties are not used. Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H. Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") Reported-by: Xiang A Wang <xiang.a.wang@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch ↵Ville Syrjälä
specified in the VBT My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero <daniel.otero@outlook.com> Cc: stable@vger.kernel.org Tested-by: Daniel Otero <daniel.otero@outlook.com> Fixes: d61992565bd3 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 7a17995a3dc8613f778a9e2fd20e870f17789544) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-11-15net: arc_emac: don't pass multicast packets to kernel in non-multicast modeAlexander Kochetkov
The patch disable capturing multicast packets when multicast mode disabled for ethernet ('ifconfig eth0 -multicast'). In that case no multicast packet will be passed to kernel. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: arc_emac: annonce IFF_MULTICAST supportAlexander Kochetkov
Multicast support was implemented by commit 775dd682e2b0ec7 ('arc_emac: implement promiscuous mode and multicast filtering'). It can be enabled explicity using 'ifconfig eth0 multicast'. The patch is needed in order to remove explicit configuration as most devices has multicast mode enabled by default. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15stmmac: fix PTP type ethtool statsGiuseppe CAVALLARO
This patch fixes the ethtool stats for PTP frames; previous version does not take care about some message types: i.e. announce, management and signaling. It also provided a broken statistic in case of "No PTP message received". Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15stmmac: fix PTP support for GMAC4Giuseppe CAVALLARO
Due to bad management of the descriptors, when use ptp4l, kernel panics as shown below: ----------------------------------------------------------- Unable to handle kernel NULL pointer dereference at virtual address 000001ac ... Internal error: Oops: 17 [#1] SMP ARM ... Hardware name: STi SoC with Flattened Device Tree task: c0c05e80 task.stack: c0c00000 PC is at dwmac4_wrback_get_tx_timestamp_status+0x0/0xc LR is at stmmac_tx_clean+0x2f8/0x4d4 ----------------------------------------------------------- In case of GMAC4 the extended descriptor pointers were used for getting the timestamp. These are NULL for this HW, and the normal ones must be used. The PTP also had problems on this chip due to the bad register management and issues on the algo adopted to setup the PTP and getting the timestamp values from the descriptors. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15stmmac: update the PTP header fileGiuseppe CAVALLARO
This patch is to update this file by using BIT macros, removing not used defines and fixes some typos. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16Merge tag 'sunxi-drm-fixes-for-4.9' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes sun4i-drm fixes for 4.9 A few patches to fix our error handling and our panel / bridge calls. * tag 'sunxi-drm-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: Propagate error to the caller drm/sun4i: Fix error handling drm/sun4i: rgb: Remove the bridge enable/disable functions drm/sun4i: rgb: Enable panel after controller
2016-11-15IB/hfi1: Remove incorrect IS_ERR checkDennis Dalessandro
Remove IS_ERR check from caching code as the function being called does not actually return error pointers. Fixes: f19bd643dbde: "IB/hfi1: Prevent NULL pointer deferences in caching code" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Prevent hardware counter names from being cut offJianxin Xiong
Increase the size of the buffer that is used to construct per-VL and per-SDMA counter names. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Fix ECN processing in prescan_rxqDasaratharaman Chandramouli
When processing ECN via the prescan_rxq path, some fields in the packet structure are passed uninitialized. This can potentially cause NULL pointer exceptions during ECN handling. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 09:56:15 +0000