| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Daniel Vetter:
"I pinged the usual suspects, only intel fixes pending"
* tag 'drm-fixes-2021-04-16' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling the panel
drm/i915: Don't zero out the Y plane's watermarks
drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
"A single fix for an older problem with the sysfs interface: do not
allow exporting GPIO lines which were marked invalid by the driver"
* tag 'gpio-fixes-for-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sysfs: Obey valid_mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"The changes are all device/driver specific fixes:
- EV_KEY and EV_ABS regression fix for Wacom from Ping Cheng
- BIOS-specific quirk to fix some of the AMD_SFH-based systems, from
Hans de Goede
- other small error handling fixes and device ID additions"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices
AMD_SFH: Add DMI quirk table for BIOS-es which don't set the activestatus bits
AMD_SFH: Add sensor_mask module parameter
AMD_SFH: Removed unused activecontrolstatus member from the amd_mp2_dev struct
HID: wacom: Assign boolean values to a bool variable
HID cp2112: fix support for multiple gpiochips
HID: alps: fix error return code in alps_input_configured()
HID: asus: Add support for 2021 ASUS N-Key keyboard
HID: google: add don USB id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Just a few driver fixes here"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - drop zero-checking of ABS_MT_TOUCH_MAJOR resolution
Input: elants_i2c - fix division by zero if firmware reports zero phys size
Input: nspire-keypad - enable interrupts only when opened
Input: i8042 - fix Pegatron C15B ID entry
Input: n64joy - fix return value check in n64joy_probe()
Input: s6sy761 - fix coordinate read bit shift
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix DM verity target FEC support's RS roots IO to always be aligned.
This fixes a previous stable@ fix that overcorrected for a different
configuration that also resulted in misaligned roots IO"
* tag 'for-5.12/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity fec: fix misaligned RS roots IO
|
|
commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to
block size") introduced the possibility for misaligned roots IO
relative to the underlying device's logical block size. E.g. Android's
default RS roots=2 results in dm_bufio->block_size=1024, which causes
the following EIO if the logical block size of the device is 4096,
given v->data_dev_block_bits=12:
E sd 0 : 0:0:0: [sda] tag#30 request not aligned to the logical block size
E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5
Fix this by onlu using f->roots for dm_bufio blocksize IFF it is
aligned to v->data_dev_block_bits.
Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size")
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A couple of dmaengine driver fixes for:
- race and descriptor issue for xilinx driver
- fix interrupt handling, wq state & cleanup, field sizes for
completion, msix permissions for idxd driver
- runtime pm fix for tegra driver
- double free fix in dma_async_device_register"
* tag 'dmaengine-fix-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: fix wq cleanup of WQCFG registers
dmaengine: idxd: clear MSIX permission entry on shutdown
dmaengine: plx_dma: add a missing put_device() on error path
dmaengine: tegra20: Fix runtime PM imbalance on error
dmaengine: Fix a double free in dma_async_device_register
dmaengine: dw: Make it dependent to HAS_IOMEM
dmaengine: idxd: fix wq size store permission state
dmaengine: idxd: fix opcap sysfs attribute output
dmaengine: idxd: fix delta_rec and crc size field for completion record
dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback
dmaengine: xilinx: dpdma: Fix race condition in done IRQ
dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
|
|
Pull VFIO fix from Alex Williamson:
"Verify mmap region within range (Christian A. Ehrhardt)"
* tag 'vfio-v5.12-rc8' of git://github.com/awilliam/linux-vfio:
vfio/pci: Add missing range check in vfio_pci_mmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Richard Weinberger:
"Fix WAITRDY break condition and timeout in mtk nand driver"
* tag 'fixes-for-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
|
|
When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.
Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
A pre-release silicon erratum workaround where wq reset does not clear
WQCFG registers was leaked into upstream code. Use wq reset command
instead of blasting the MMIO region. This also address an issue where
we clobber registers in future devices.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reported-by: Shreenivaas Devarajan <shreenivaas.devarajan@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add disabling/clearing of MSIX permission entries on device shutdown to
mirror the enabling of the MSIX entries on probe. Current code left the
MSIX enabled and the pasid entries still programmed at device shutdown.
Fixes: 8e50d392652f ("dmaengine: idxd: Add shared workqueue support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161824457969.882533.6020239898682672311.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
the panel
After the recently added commit fe0f1e3bfdfe ("drm/i915: Shut down
displays gracefully on reboot"), the DSI panel on a Cherry Trail based
Predia Basic tablet would no longer properly light up after reboot.
I've managed to reproduce this without rebooting by doing:
chvt 3; echo 1 > /sys/class/graphics/fb0/blank;\
echo 0 > /sys/class/graphics/fb0/blank
Which rapidly turns the panel off and back on again.
The vlv_dsi.c code uses an intel_dsi_msleep() helper for the various delays
used for panel on/off, since starting with MIPI-sequences version >= 3 the
delays are already included inside the MIPI-sequences.
The problems exposed by the "Shut down displays gracefully on reboot"
change, show that using this helper for the panel_pwr_cycle_delay is
not the right thing to do. This has not been noticed until now because
normally the panel never is cycled off and directly on again in quick
succession.
Change the msleep for the panel_pwr_cycle_delay to a normal msleep()
call to avoid the panel staying black after a quick off + on cycle.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325114823.44922-1-hdegoede@redhat.com
(cherry picked from commit 2878b29fc25a0dac0e1c6c94177f07c7f94240f0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Don't zero out the watermarks for the Y plane since we've already
computed them when computing the UV plane's watermarks (since the
UV plane always appears before ethe Y plane when iterating through
the planes).
This leads to allocating no DDB for the Y plane since .min_ddb_alloc
also gets zeroed. And that of course leads to underruns when scanning
out planar formats.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: dbf71381d733 ("drm/i915: Nuke intel_atomic_crtc_state_for_each_plane_state() from skl+ wm code")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327005945.4929-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit f99b805fb9413ff007ca0b6add871737664117dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Looks like that there actually are another subset of laptops on the market
that don't support the Intel HDR backlight interface, but do advertise
support for the VESA DPCD backlight interface despite the fact it doesn't
seem to work.
Note though I'm not entirely clear on this - on one of the machines where
this issue was observed, I also noticed that we appeared to be rejecting
the VBT defined backlight frequency in
intel_dp_aux_vesa_calc_max_backlight(). It's noted in this function that:
/* Use highest possible value of Pn for more granularity of brightness
* adjustment while satifying the conditions below.
* ...
* - FxP is within 25% of desired value.
* Note: 25% is arbitrary value and may need some tweak.
*/
So it's possible that this value might just need to be tweaked, but for now
let's just disable the VESA backlight interface unless it's specified in
the VBT just to be safe. We might be able to try enabling this again by
default in the future.
Fixes: 2227816e647a ("drm/i915/dp: Allow forcing specific interfaces through enable_dpcd_backlight")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/3169
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210318170204.513000-1-lyude@redhat.com
(cherry picked from commit 9e2eb6d5380e9dadcd2baecb51f238e5eba94bee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add a missing put_device(&pdev->dev) if the call to
dma_async_device_register(dma); fails.
Fixes: 905ca51e63be ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
pm_runtime_get_sync() will increase the runtime PM counter
even it returns an error. Thus a pairing decrement is needed
to prevent refcount leak. Fix this by replacing this API with
pm_runtime_resume_and_get(), which will not change the runtime
PM counter on error.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210409082805.23643-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In the first list_for_each_entry() macro of dma_async_device_register,
it gets the chan from list and calls __dma_async_device_channel_register
(..,chan). We can see that chan->local is allocated by alloc_percpu() and
it is freed chan->local by free_percpu(chan->local) when
__dma_async_device_channel_register() failed.
But after __dma_async_device_channel_register() failed, the caller will
goto err_out and freed the chan->local in the second time by free_percpu().
The cause of this problem is forget to set chan->local to NULL when
chan->local was freed in __dma_async_device_channel_register(). My
patch sets chan->local to NULL when the callee failed to avoid double free.
Fixes: d2fb0a0438384 ("dmaengine: break out channel registration")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210331014458.3944-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.
Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
WQ size can only be changed when the device is disabled. Current code
allows change when device is enabled but wq is disabled. Change the check
to detect device state.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The operation capability register is 256bits. The current output only
prints out the first 64bits. Fix to output the entire 256bits. The current
code omits operation caps from IAX devices.
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Reported-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Current code blindly writes over the SWERR and the OVERFLOW bits. Write
back the bits actually read instead so the driver avoids clobbering the
OVERFLOW bit that comes after the register is read.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the vDSO exception handling return path to disable interrupts
again.
- A fix for the CE collector to return the proper return values to its
callers which are used to convey what the collector has done with the
error address.
* tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Correct exc_general_protection() and math_error() return paths
RAS/CEC: Correct ce_add_elem()'s returned values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, all in drivers.
The hpsa three are the most extensive and the most problematic: it's a
packed structure misalignment that oopses on ia64 but looks like it
would also oops on quite a few non-x86 architectures.
The pm80xx is a regression and the rest are bug fixes for patches in
the misc tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
scsi: target: iscsi: Fix zero tag inside a trace event
scsi: pm80xx: Fix chip initialization failure
scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs
scsi: ufs: core: Fix task management request completion timeout
scsi: hpsa: Add an assert to prevent __packed reintroduction
scsi: hpsa: Fix boot on ia64 (atomic_t alignment)
scsi: hpsa: Use __packed on individual structs, not header-wide
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for 5.12-rc7 to resolve a reported
problem that caused some devices to lockup when booting. It has been
in linux-next with no reported issues"
* tag 'driver-core-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix locking bug in deferred_probe_timeout_work_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes for 5.12-rc7 for
reported issues:
- thunderbolt leaks and off-by-one fix
- cdnsp deque fix
- usbip fixes for syzbot-reported issues
All have been in linux-next with no reported problems"
* tag 'usb-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbip: synchronize event handler with sysfs code paths
usbip: vudc synchronize sysfs code paths
usbip: stub-dev synchronize sysfs code paths
usbip: add sysfs_lock to synchronize sysfs code paths
thunderbolt: Fix off by one in tb_port_find_retimer()
thunderbolt: Fix a leak in tb_retimer_add()
usb: cdnsp: Fixes issue with dequeuing requests after disabling endpoint
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A mixture of driver and documentation bugfixes for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: mention Oleksij as maintainer of the binding docs
i2c: exynos5: correct top kerneldoc
i2c: designware: Adjust bus_freq_hz when refuse high speed mode set
i2c: hix5hd2: use the correct HiSilicon copyright
i2c: gpio: update email address in binding docs
i2c: imx: drop me as maintainer of binding docs
i2c: stm32f4: Mundane typo fix
I2C: JZ4780: Fix bug for Ingenic X1000.
i2c: turn recovery error on init to debug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's the latest pile of clk driver and clk framework fixes for this
release:
- Two clk framework fixes for a long standing issue in
clk_notifier_{register,unregister}() where we used a pointer that
was for a struct containing a list head when there was no container
struct
- A compile warning fix for socfpga that's good to have
- A double free problem with devm registered fixed factor clks
- One last fix to the Qualcomm camera clk driver to use the right clk
ops so clks don't get stuck and stop working because the firmware
takes them for a ride"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed: fix double free in resource managed fixed-factor clock
clk: fix invalid usage of list cursor in unregister
clk: fix invalid usage of list cursor in register
clk: qcom: camcc: Update the clock ops for the SC7180
clk: socfpga: fix iomem pointer cast on 64-bit
|
|
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (kasan, gup, pagecache,
and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
kfence, x86: fix preemptible warning on KPTI-enabled systems
lib/test_kasan_module.c: suppress unused var warning
kasan: fix conflict with page poisoning
fs: direct-io: fix missing sdio->boundary
ia64: fix user_stack_pointer() for ptrace()
ocfs2: fix deadlock between setattr and dio_end_io_write
gcov: re-fix clang-11+ support
nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
mm/gup: check page posion status for coredump.
.mailmap: fix old email addresses
mailmap: update email address for Jordan Crouse
treewide: change my e-mail address, fix my name
MAINTAINERS: update CZ.NIC's Turris information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
|
|
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix fw_devlink failure with ".*,nr-gpios" properties
- Doc link reference fixes from Mauro
- Fixes for unaligned FDT handling found on OpenRisc. First, avoid
crash with better error handling when unflattening an unaligned FDT.
Second, fix memory allocations for FDTs to ensure alignment.
* tag 'devicetree-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: fw_devlink: do not link ".*,nr-gpios"
dt-bindings:iio:adc: update motorola,cpcap-adc.yaml reference
dt-bindings: fix references for iio-bindings.txt
dt-bindings: don't use ../dir for doc references
of: unittest: overlay: ensure proper alignment of copied FDT
of: properly check for error returned by fdt_get_name()
|
|
Pull drm fixes from Dave Airlie:
"Was relatively quiet this week, but still a few pulls came in, pretty
much small fixes across the board, a couple of regression fixes in the
amdgpu/radeon code, msm has a few minor fixes across the board, a
panel regression fix also.
amdgpu:
- DCN3 fix
- Fix CAC setting regression for TOPAZ
- Fix ttm regression
radeon:
- Fix ttm regression
msm:
- a5xx/a6xx timestamp fix
- microcode version check
- fail path fix
- block programming fix
- error removal fix
i915:
- Fix invalid access to ACPI _DSM objects
xen:
- Fix use-after-free in xen
- minor duplicate defintion cleanup
vc4:
- Reduce fifo threshold on hvs4 to fix a fifo full error
- minor redunantant assignment cleanup
panel:
- Disable TE support for Droid4 and N950"
* tag 'drm-fixes-2021-04-10' of git://anongit.freedesktop.org/drm/drm:
drm/vc4: crtc: Reduce PV fifo threshold on hvs4
drm/vc4: plane: Remove redundant assignment
drm/amdgpu/smu7: fix CAC setting on TOPAZ
drm/radeon: Fix size overflow
drm/amdgpu: Fix size overflow
drm/i915: Fix invalid access to ACPI _DSM objects
drm/amd/display: Add missing mask for DCN3
drm/panel: panel-dsi-cm: disable TE for now
drm/msm/disp/dpu1: program 3d_merge only if block is attached
drm/msm: a6xx: fix version check for the A650 SQE microcode
drm/msm: Fix a5xx/a6xx timestamps
drm/msm: Fix removal of valid error case when checking speed_bin
drm/msm: Set drvdata to NULL when msm_drm_init() fails
drivers: gpu: drm: xen_drm_front_drm_info is declared twice
gpu/xen: Fix a use after free in xen_drm_drv_init
|
|
Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).
Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.
Many thanks to Heiner Kallweit for suggesting this solution.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 3e21a10fdea3 ("lan743x: trim all 4 bytes of the FCS; not just 2")
Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.
nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.
[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
- gpio-adnp.txt
- gpio-xgene-sb.txt
- gpio-xlp.txt
- snps,dw-apb-gpio.yaml
[1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20
Fixes errors such as:
OF: /palmbus@300000/gpio@600: could not find phandle
Fixes: 7f00be96f125 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix invalid access to ACPI _DSM objects (Takashi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YHAW6NInrybUoat6@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc7:
- Fix use-after-free in xen.
- Reduce fifo threshold on hvs4 to fix a fifo full error.
- Disable TE support for Droid4 and N950.
- Small compiler fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e7647dd9-60c3-9dfd-a377-89d717212e13@linux.intel.com
|
|
Pull vdpa/mlx5 fixes from Michael Tsirkin:
"Last minute fixes.
These all look like something we are better off having
than not ..."
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix suspend/resume index restoration
vdpa/mlx5: Fix wrong use of bit numbers
vdpa/mlx5: Retrieve BAR address suitable any function
vdpa/mlx5: Use the correct dma device when registering memory
vdpa/mlx5: should exclude header length and fcs from mtu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc fixes from Bjorn Andersson:
"This fixes an issue with firmware loading on the TI K3 PRU, fixes
compatibility with GNU binutils for the same and resolves link error
due to a 64-bit division in the Qualcomm PIL info.
It also recognizes Mathieu Poirier as co-maintainer of the remoteproc
and rpmsg subsystems"
* tag 'rproc-v5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
remoteproc: pru: Fix firmware loading crashes on K3 SoCs
remoteproc: pru: Fix loading of GNU Binutils ELF
MAINTAINERS: Add co-maintainer for remoteproc/RPMSG subsystems
remoteproc: qcom: pil_info: avoid 64-bit division
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix of a 5.12 patch for the rather uncommon problem of
running as a Xen guest with a real time kernel config"
* tag 'for-linus-5.12b-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/evtchn: Change irq_info lock to raw_spinlock_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a build issue introduced by a previous fix in the ACPI processor
driver (Vitaly Kuznetsov)"
* tag 'acpi-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix build when CONFIG_ACPI_PROCESSOR=m
|
|
When we suspend the VM, the VDPA interface will be reset. When the VM is
resumed again, clear_virtqueues() will clear the available and used
indices resulting in hardware virqtqueue objects becoming out of sync.
We can avoid this function alltogether since qemu will clear them if
required, e.g. when the VM went through a reboot.
Moreover, since the hw available and used indices should always be
identical on query and should be restored to the same value same value
for virtqueues that complete in order, we set the single value provided
by set_vq_state(). In get_vq_state() we return the value of hardware
used index.
Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask
conditionals.
Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with
the rest of the code.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
struct mlx5_core_dev has a bar_addr field that contains the correct bar
address for the function regardless of whether it is pci function or sub
function. Use it.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
In cases where the vdpa instance uses a SF (sub function), the DMA
device is the parent device. Use a function to retrieve the correct DMA
device.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.
Fix the MTU so packets won't get dropped silently.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
drivers/usb/core/hub.c: usb_new_device() contains the following:
/* By default, forbid autosuspend for all devices. It will be
* allowed for hubs during binding.
*/
usb_disable_autosuspend(udev);
So for anything which is not a hub, such as btusb devices, autosuspend is
disabled by default and we must call usb_enable_autosuspend(udev) to
enable it.
This means that the "Fix the autosuspend enable and disable" commit,
which drops the usb_enable_autosuspend() call when the enable_autosuspend
module option is true, is completely wrong, revert it.
This reverts commit 7bd9fb058d77213130e4b3e594115c028b708e7e.
Cc: Hui Wang <hui.wang@canonical.com>
Fixes: 7bd9fb058d77 ("Bluetooth: btusb: Fix the autosuspend enable and disable")
Acked-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
some more minor fixes:
- a5xx/a6xx timestamp fix
- microcode version check
- fail path fix
- block programming fix
- error removal fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsMj7Nv3vVaVWMxPy8Y=Z_SnZmVKhKgKDxDYTr9rGN_+w@mail.gmail.com
|
|
There are a few more bits in the GSWIP_MII_CFG register for which we
did rely on the boot-loader (or the hardware defaults) to set them up
properly.
For some external RMII PHYs we need to select the GSWIP_MII_CFG_RMII_CLK
bit and also we should un-set it for non-RMII PHYs. The
GSWIP_MII_CFG_RMII_CLK bit is ignored for other PHY connection modes.
The GSWIP IP also supports in-band auto-negotiation for RGMII PHYs when
the GSWIP_MII_CFG_RGMII_IBS bit is set. Clear this bit always as there's
no known hardware which uses this (so it is not tested yet).
Clear the xMII isolation bit when set at initialization time if it was
previously set by the bootloader. Not doing so could lead to no traffic
(neither RX nor TX) on a port with this bit set.
While here, also add the GSWIP_MII_CFG_RESET bit. We don't need to
manage it because this bit is self-clearning when set. We still add it
here to get a better overview of the GSWIP_MII_CFG register.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
