summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-26Merge tag 'tegra-for-5.10-arm64-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Changes for v5.10-rc1 This set of changes fixes some minor issues in existing device trees and adds ID EEPROMs on the Jetson Xavier NX. All ID EEPROMs are now labelled to allow them to be detected by software. It also adds support for the Tegra234 VDK board, which is a pre-silicon platform for the upcoming Orin SoC. * tag 'tegra-for-5.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Initial Tegra234 VDK support arm64: tegra: Populate EEPROMs for Jetson Xavier NX arm64: tegra: Add label properties for EEPROMs arm64: tegra: Add DT binding for AHUB components arm64: tegra: Enable ACONNECT, ADMA and AGIC on Jetson Nano arm64: tegra: Properly size register regions for GPU on Tegra194 arm64: tegra: Use valid PWM period for VDD_GPU on Tegra210 arm64: tegra: Describe display controller outputs for Tegra210 arm64: tegra: Disable SD card write-protection on Jetson Nano arm64: tegra: Add VBUS supply for micro USB port on Jetson Nano arm64: tegra: Wire up pinctrl states for all DPAUX controllers arm64: tegra: Add ID EEPROMs on Jetson AGX Xavier Link: https://lore.kernel.org/r/20200918150303.3938852-5-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-18arm64: tegra: Initial Tegra234 VDK supportThierry Reding
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It supports a subset of the peripherals that will be available in the final chip and serves as a bootstrapping platform. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-08-30Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - fix regression in af_alg that affects iwd - restore polling delay in qat - fix double free in ingenic on error path - fix potential build failure in sa2ul due to missing Kconfig dependency * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - Work around empty control messages without MSG_MORE crypto: sa2ul - add Kconfig selects to fix build error crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc crypto: qat - add delay before polling mailbox
2020-08-30Merge tag 'irq-urgent-2020-08-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Revert the platform driver conversion of interrupt chip drivers as it turned out to create more problems than it solves. - Fix a trivial typo in the new module helpers which made probing reliably fail. - Small fixes in the STM32 and MIPS Ingenic drivers - The TI firmware rework which had badly managed dependencies and had to wait post rc1" * tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Leave parent IRQ unmasked on suspend irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers arm64: dts: k3-am65: Update the RM resource types arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent. irqchip/ti-sci-intr: Add support for INTR being a parent to INTR dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent firmware: ti_sci: Add support for getting resource with subtype firmware: ti_sci: Drop unused structure ti_sci_rm_type_map firmware: ti_sci: Drop the device id to resource type translation
2020-08-30Merge tag 'locking-urgent-2020-08-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of fixes for lockdep, tracing and RCU: - Prevent recursion by using raw_cpu_* operations - Fixup the interrupt state in the cpu idle code to be consistent - Push rcu_idle_enter/exit() invocations deeper into the idle path so that the lock operations are inside the RCU watching sections - Move trace_cpu_idle() into generic code so it's called before RCU goes idle. - Handle raw_local_irq* vs. local_irq* operations correctly - Move the tracepoints out from under the lockdep recursion handling which turned out to be fragile and inconsistent" * tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep,trace: Expose tracepoints lockdep: Only trace IRQ edges mips: Implement arch_irqs_disabled() arm64: Implement arch_irqs_disabled() nds32: Implement arch_irqs_disabled() locking/lockdep: Cleanup x86/entry: Remove unused THUNKs cpuidle: Move trace_cpu_idle() into generic code cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic sched,idle,rcu: Push rcu_idle deeper into the idle path cpuidle: Fixup IRQ state lockdep: Use raw_cpu_*() for per-cpu variables
2020-08-30Merge tag 'powerpc-5.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Revert our removal of PROT_SAO, at least one user expressed an interest in using it on Power9. Instead don't allow it to be used in guests unless enabled explicitly at compile time. - A fix for a crash introduced by a recent change to FP handling. - Revert a change to our idle code that left Power10 with no idle support. - One minor fix for the new scv system call path to set PPR. - Fix a crash in our "generic" PMU if branch stack events were enabled. - A fix for the IMC PMU, to correctly identify host kernel samples. - The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make them incompatible in Kconfig until the code can be fixed. - A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix. Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan. * tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check" powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc powerpc/perf: Fix crashes with generic_compat_pmu & BHRB powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode powerpc/64s: scv entry should set PPR Documentation/powerpc: fix malformed table in syscall64-abi video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n selftests/powerpc: Update PROT_SAO test to skip ISA 3.1 powerpc/64s: Disallow PROT_SAO in LPARs by default Revert "powerpc/64s: Remove PROT_SAO support"
2020-08-30Merge tag 'usb-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Let's try this again... Here are some USB fixes for 5.9-rc3. This differs from the previous pull request for this release in that the usb gadget patch now does not break some systems, and actually does what it was intended to do. Many thanks to Marek Szyprowski for quickly noticing and testing the patch from Andy Shevchenko to resolve this issue. Additionally, some more new USB quirks have been added to get some new devices to work properly based on user reports. Other than that, the patches are all here, and they contain: - usb gadget driver fixes - xhci driver fixes - typec fixes - new quirks and ids - fixes for USB patches that went into 5.9-rc1. All of these have been tested in linux-next with no reported issues" * tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: storage: Add unusual_uas entry for Sony PSZ drives USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() USB: gadget: u_f: Unbreak offset calculation in VLAs USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures USB: PHY: JZ4770: Fix static checker warning. USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb() USB: gadget: u_f: add overflow checks to VLA macros xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed xhci: Do warm-reset when both CAS and XDEV_RESUME are set usb: host: xhci: fix ep context print mismatch in debugfs usb: uas: Add quirk for PNY Pro Elite tools: usb: move to tools buildsystem USB: Fix device driver race USB: Also match device drivers using the ->match vfunc usb: host: xhci-tegra: fix tegra_xusb_get_phy() usb: host: xhci-tegra: otg usb2/usb3 port init usb: hcd: Fix use after free in usb_hcd_pci_remove() usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port() ...
2020-08-30Merge tag 'edac_urgent_for_v5.9_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "A fix to properly clear ghes_edac driver state on driver remove so that a subsequent load can probe the system properly (Shiju Jose)" * tag 'edac_urgent_for_v5.9_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()
2020-08-29Merge tag 'fallthrough-fixes-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo A. R. Silva: "Fix some minor issues introduced by the recent treewide fallthrough conversions: - Fix identation issue - Fix erroneous fallthrough annotation - Remove unnecessary fallthrough annotation - Fix code comment changed by fallthrough conversion" * tag 'fallthrough-fixes-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: arm64/cpuinfo: Remove unnecessary fallthrough annotation media: dib0700: Fix identation issue in dib8096_set_param_override() afs: Remove erroneous fallthough annotation iio: dpot-dac: fix code comment in dpot_dac_read_raw()
2020-08-29fsldma: fix very broken 32-bit ppc ioread64 functionalityLinus Torvalds
Commit ef91bb196b0d ("kernel.h: Silence sparse warning in lower_32_bits") caused new warnings to show in the fsldma driver, but that commit was not to blame: it only exposed some very incorrect code that tried to take the low 32 bits of an address. That made no sense for multiple reasons, the most notable one being that that code was intentionally limited to only 32-bit ppc builds, so "only low 32 bits of an address" was completely nonsensical. There were no high bits to mask off to begin with. But even more importantly fropm a correctness standpoint, turning the address into an integer then caused the subsequent address arithmetic to be completely wrong too, and the "+1" actually incremented the address by one, rather than by four. Which again was incorrect, since the code was reading two 32-bit values and trying to make a 64-bit end result of it all. Surprisingly, the iowrite64() did not suffer from the same odd and incorrect model. This code has never worked, but it's questionable whether anybody cared: of the two users that actually read the 64-bit value (by way of some C preprocessor hackery and eventually the 'get_cdar()' inline function), one of them explicitly ignored the value, and the other one might just happen to work despite the incorrect value being read. This patch at least makes it not fail the build any more, and makes the logic superficially sane. Whether it makes any difference to the code _working_ or not shall remain a mystery. Compile-tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-29Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A core fix for ACPI matching and two driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iproc: Fix shifting 31 bits i2c: rcar: in slave mode, clear NACK earlier i2c: acpi: Remove dead code, i.e. i2c_acpi_match_device() i2c: core: Don't fail PRP0001 enumeration when no ID table exist
2020-08-29Merge tag 'for-linus-5.9-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fixes for Xen: one needed for ongoing work to support virtio with Xen, and one for a corner case in IRQ handling with Xen" * tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: Add misuse warning to virt_to_gfn xen/xenbus: Fix granting of vmalloc'd memory XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
2020-08-29Merge tag 'hwmon-for-v5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix tempeerature scale in gsc-hwmon driver - Fix divide by 0 error in nct7904 driver - Drop non-existing attribute from pmbus/isl68137 driver - Fix status check in applesmc driver * tag 'hwmon-for-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gsc-hwmon) Scale temperature to millidegrees hwmon: (applesmc) check status earlier. hwmon: (nct7904) Correct divide by 0 hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_1 telemetry for RAA228228
2020-08-28Merge tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - nbd timeout fix (Hou) - device size fix for loop LOOP_CONFIGURE (Martijn) - MD pull from Song with raid5 stripe size fix (Yufen) * tag 'block-5.9-2020-08-28' of git://git.kernel.dk/linux-block: md/raid5: make sure stripe_size as power of two loop: Set correct device size when using LOOP_CONFIGURE nbd: restore default timeout when setting it to zero
2020-08-28Merge tag 'devprop-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Prevent the promotion of the secondary firmware node of a device to the primary one from leaking a pointer (Heikki Krogerus)" * tag 'devprop-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Fix the secondary firmware node handling in set_primary_fwnode()
2020-08-28Merge tag 'acpi-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two recent issues in the ACPI memory mappings management code and tighten up error handling in the ACPI driver for AMD SoCs (APD). Specifics: - Avoid redundant rounding to the page size in acpi_os_map_iomem() to address a recently introduced issue with the EFI memory map permission check on ARM64 (Ard Biesheuvel). - Fix acpi_release_memory() to wait until the memory mappings released by it have been really unmapped (Rafael Wysocki). - Make the ACPI driver for AMD SoCs (APD) check the return value of acpi_dev_get_property() to avoid failures in the cases when the device property under inspection is missing (Furquan Shaikh)" * tag 'acpi-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: OSL: Prevent acpi_release_memory() from returning too early ACPI: ioremap: avoid redundant rounding to OS page size ACPI: SoC: APD: Check return value of acpi_dev_get_property()
2020-08-28Merge tag 'pm-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the recently added Tegra194 cpufreq driver and the handling of devices using runtime PM during system-wide suspend, improve the intel_pstate driver documentation and clean up the cpufreq core. Specifics: - Make the recently added Tegra194 cpufreq driver use read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting logical_cpu_map (Sumit Gupta). - Drop the automatic system wakeup event reporting for devices with pending runtime-resume requests during system-wide suspend to avoid spurious aborts of the suspend flow (Rafael Wysocki). - Fix build warning in the intel_pstate driver documentation and improve the wording in there (Randy Dunlap). - Clean up two pieces of code in the cpufreq core (Viresh Kumar)" * tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Use WARN_ON_ONCE() for invalid relation cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq() PM: sleep: core: Fix the handling of pending runtime resume requests Documentation: fix pm/intel_pstate build warning and wording cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
2020-08-28Merge branch 'acpi-mm'Rafael J. Wysocki
* acpi-mm: ACPI: OSL: Prevent acpi_release_memory() from returning too early ACPI: ioremap: avoid redundant rounding to OS page size
2020-08-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Use WARN_ON_ONCE() for invalid relation cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq() Documentation: fix pm/intel_pstate build warning and wording cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
2020-08-28Merge tag 'mfd-fixes-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: - fix double free - handle devicetree disabled devices gracefully * tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mfd-core: Ensure disabled devices are ignored without error mfd: core: Fix double-free in mfd_remove_devices_fn()
2020-08-28Merge tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "As expected a bit of an rc3 uptick, amdgpu and msm are the main ones, one msm patch was from the merge window, but had dependencies and we dropped it until the other tree had landed. Otherwise it's a couple of fixes for core, and etnaviv, and single i915, exynos, omap fixes. I'm still tracking the Sandybridge gpu relocations issue, if we don't see much movement I might just queue up the reverts. I'll talk to Daniel next week once he's back from holidays. core: - Take modeset bkl for legacy drivers dp_mst: - Allow null crtc in dp_mst i915: - Fix command parser desc matching with masks amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix msm: - opp/bw scaling patch followup - frequency restoring fux - vblank in atomic commit fix - dpu modesetting fixes - fencing fix etnaviv: - scheduler interaction fix - gpu init regression fix exynos: - Just drop __iommu annotation to fix sparse warning omap: - locking state fix" * tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits) drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init drm/amdgpu: disable runtime pm for navy_flounder drm/amd/display: Retry AUX write when fail occurs drm/amdgpu: Fix buffer overflow in INFO ioctl drm/amd/powerplay: Fix hardmins not being sent to SMU for RV drm/amdgpu: use MODE1 reset for navy_flounder by default drm/amd/pm: correct the thermal alert temperature limit settings drm/amdgpu: add asd fw check before loading asd drm/amd/display: Keep current gain when ABM disable immediately drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation drm/amd/display: Revert HDCP disable sequence change drm/amd/display: Send DISPLAY_OFF after power down on boot drm/amdgpu/gfx10: refine mgcg setting drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting drm/amd/pm: set VCN pg per instances drm/amd/pm: enable run_btc callback for sienna_cichlid drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps drm/amd/display: Reject overlay plane configurations in multi-display scenarios ...
2020-08-28mfd: mfd-core: Ensure disabled devices are ignored without errorLee Jones
Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") changed the semantics for disabled devices in mfd_add_device(). Instead of silently ignoring a disabled child device, an error was returned. On receipt of the error mfd_add_devices() the precedes to remove *all* child devices and returns an all-failed error to the caller, which will inevitably fail the parent device as well. This patch reverts back to the old semantics and ignores child devices which are disabled in Device Tree. Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Reported-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-28usb: storage: Add unusual_uas entry for Sony PSZ drivesAlan Stern
The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by: Till Dörges <doerges@pre-sense.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27md/raid5: make sure stripe_size as power of twoYufen Yu
Commit 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs entry") make stripe_size as a configurable value. It just requires stripe_size as multiple of 4KB. In fact, we should make sure stripe_size as power of two. Otherwise, stripe_shift which is the result of ilog2 can not represent the real stripe_size. Then, stripe_hash() and stripe_hash_locks_hash() may get unexpected value. Fixes: 3b5408b98e4d ("md/raid5: support config stripe_size by sysfs entry") Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-28Merge tag 'drm-intel-fixes-2020-08-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc3: - Fix command parser desc matching with masks Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87imd45ufw.fsf@intel.com
2020-08-28Merge tag 'drm-misc-fixes-2020-08-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.9-rc2: - Take modeset bkl for legacy drivers. - Allow null crtc in dp_mst. - Omap locking state fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7af1e52a-27de-8edc-d0b2-e23b01e8bc96@linux.intel.com
2020-08-27media: dib0700: Fix identation issue in dib8096_set_param_override()Gustavo A. R. Silva
Fix identation issues. Fixes: 5e9c85d98337 ("[media] dib8096: enhancement") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-27hwmon: (gsc-hwmon) Scale temperature to millidegreesTim Harvey
The GSC registers report temperature in decidegrees celcius so we need to scale it to represent the hwmon sysfs API of millidegrees. Cc: stable@vger.kernel.org Fixes: 3bce5377ef66 ("hwmon: Add Gateworks System Controller support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/1598548824-16898-1-git-send-email-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-08-27EDAC/ghes: Fix NULL pointer dereference in ghes_edac_register()Shiju Jose
After b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") and with CONFIG_DEBUG_TEST_DRIVER_REMOVE enabled, ghes_hw.dimms becomes a NULL pointer after the second ->probe() (aka ghes_edac_register()) which the config option causes to be called. This happens because the static variable which holds down whether the system has been scanned already, doesn't get reset in ghes_edac_unregister(). Then, on the second probe, ghes_scan_system() doesn't get to enumerate the DIMMs, leading to ghes_hw.dimms remaining NULL. Clear the variable and rename it to something more descriptive so that a second probe succeeds. [ bp: Rewrite commit message. ] Fixes: b9cae27728d1 ("EDAC/ghes: Scan the system once on driver init") Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200827140450.1620-1-shiju.jose@huawei.com
2020-08-27cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()Viresh Kumar
"cpufreq_driver" is guaranteed to be valid here, no need to check it here. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-27video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=nMichael Ellerman
The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20200821104910.3363818-1-mpe@ellerman.id.au
2020-08-27USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt
This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()Tang Bin
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27USB: gadget: u_f: Unbreak offset calculation in VLAsAndy Shevchenko
Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-DAlan Stern
The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-27xen/xenbus: Fix granting of vmalloc'd memorySimon Leiner
On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner <simon@leiner.me> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27XEN uses irqdesc::irq_data_common::handler_data to store a per interruptThomas Gleixner
XEN data pointer which contains XEN specific information. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik <roman@zededa.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-27Merge tag 'amd-drm-fixes-5.9-2020-08-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-08-26: amdgpu: - Misc display fixes - Backlight fixes - MPO fix for DCN1 - Fixes for Sienna Cichlid - Fixes for Navy Flounder - Vega SW CTF fixes - SMU fix for Raven - Fix a possible overflow in INFO ioctl - Gfx10 clockgating fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826200801.17735-1-alexander.deucher@amd.com
2020-08-27Merge tag 'drm-msm-fixes-2020-08-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some fixes for v5.9 plus the one opp/bandwidth scaling patch ("drm: msm: a6xx: use dev_pm_opp_set_bw to scale DDR") which was not included in the initial pull due to dependency on patch landing thru OPP tree Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGt45A4ObyhEdC5Ga4f4cAf-NBSVRECu7df3Gh6-X4G3tQ@mail.gmail.com
2020-08-27Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes Two fixes: One fixes a bad interaction with the DRM scheduler, leading to some dma fences not getting signalled after hitting the job timeout. The other one fixes a GPU init regression, as apparently one old core doesn't likes us reading some of the identification registers. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/aceebfe3af636346f5252bdf727cdd988bdcbdf2.camel@pengutronix.de
2020-08-26drm/amd/display: Fix memleak in amdgpu_dm_mode_config_initDinghao Liu
When amdgpu_display_modeset_create_props() fails, state and state->context should be freed to prevent memleak. It's the same when amdgpu_dm_audio_init() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: disable runtime pm for navy_flounderJiansong Chen
Disable runtime pm for navy_flounder temporarily. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Retry AUX write when fail occursWayne Lin
[Why] In dm_dp_aux_transfer() now, we forget to handle AUX_WR fail cases. We suppose every write wil get done successfully and hence some AUX commands might not sent out indeed. [How] Check if AUX_WR success. If not, retry it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amdgpu: Fix buffer overflow in INFO ioctlAlex Deucher
The values for "se_num" and "sh_num" come from the user in the ioctl. They can be in the 0-255 range but if they're more than AMDGPU_GFX_MAX_SE (4) or AMDGPU_GFX_MAX_SH_PER_SE (2) then it results in an out of bounds read. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amd/powerplay: Fix hardmins not being sent to SMU for RVNicholas Kazlauskas
[Why] DC uses these to raise the voltage as needed for higher dispclk/dppclk and to ensure that we have enough bandwidth to drive the displays. There's a bug preventing these from actuially sending messages since it's checking the actual clock (which is 0) instead of the incoming clock (which shouldn't be 0) when deciding to send the hardmin. [How] Check the clocks != 0 instead of the actual clocks. Fixes: 9ed9203c3ee7 ("drm/amd/powerplay: rv dal-pplib interface refactor powerplay part") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: use MODE1 reset for navy_flounder by defaultJiansong Chen
Switch default gpu reset method to MODE1 for navy_flounder. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/pm: correct the thermal alert temperature limit settingsEvan Quan
Do the maths in celsius degree. This can fix the issues caused by the changes below: drm/amd/pm: correct Vega20 swctf limit setting drm/amd/pm: correct Vega12 swctf limit setting drm/amd/pm: correct Vega10 swctf limit setting Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-26drm/amdgpu: add asd fw check before loading asdTao Zhou
asd is not ready for some ASICs in early stage, and psp->asd_fw is more generic than ASIC name in the check. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Keep current gain when ABM disable immediatelyBrandon Syu
[Why] When system enters s3/s0i3, backlight PWM would set user level. [How] ABM disable function add keep current gain to avoid it. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-26drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulationSamson Tam
[Why] dongle_type is set during dongle connection but for passive dongles, dongle_type is not set. If user starts with an active dongle and then switches to a passive dongle, it will still report as an active dongle. Trying to emulate the wrong connecter type results in display not lighting up. [How] Set dpcd_caps.dongle_type for passive dongles in detect_dp(). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:30:00 +0000