summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-04lkdtm/powerpc: Add SLB multihit testGanesh Goudar
To check machine check handling, add support to inject slb multihit errors. Co-developed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Use CONFIG_PPC_BOOK3S_64 to fix compile errors reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201130083057.135610-1-ganeshgr@linux.ibm.com
2020-12-04ocxl: Add new kernel tracesChristophe Lombard
Add specific kernel traces which provide information on mmu notifier and on pages range. Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201125155013.39955-6-clombard@linux.vnet.ibm.com
2020-12-04ocxl: Add mmu notifierChristophe Lombard
Add invalidate_range mmu notifier, when required (ATSD access of MMIO registers is available), to initiate TLB invalidation commands. For the time being, the ATSD0 set of registers is used by default. The pasid and bdf values have to be configured in the Process Element Entry. The PEE must be set up to match the BDF/PASID of the AFU. Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201125155013.39955-5-clombard@linux.vnet.ibm.com
2020-12-04ocxl: Update the Process Element EntryChristophe Lombard
To complete the MMIO based mechanism, the fields: PASID, bus, device and function of the Process Element Entry have to be filled. (See OpenCAPI Power Platform Architecture document) Hypervisor Process Element Entry Word 0 1 .... 7 8 ...... 12 13 ..15 16.... 19 20 ........... 31 0 OSL Configuration State (0:31) 1 OSL Configuration State (32:63) 2 PASID | Reserved 3 Bus | Device |Function | Reserved 4 Reserved 5 Reserved 6 .... Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201125155013.39955-4-clombard@linux.vnet.ibm.com
2020-12-04powerpc/ps3: make system bus's remove and shutdown callbacks return voidUwe Kleine-König
The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. For the shutdown callback it's ps3_system_bus_shutdown() which ignores the return value. To simplify the quest to make struct device_driver::remove return void, let struct ps3_system_bus_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201126165950.2554997-2-u.kleine-koenig@pengutronix.de
2020-11-01Merge tag 'char-misc-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes/removals from Greg KH: "Here's some small fixes for 5.10-rc2 and a big driver removal. The fixes are for some reported issues in the interconnect and coresight drivers, nothing major. The "big" driver removal is the MIC drivers have been asked to be removed as the hardware never shipped and Intel no longer wants to maintain something that no one can use. This is welcomed by many as the DMA usage of these drivers was "interesting" and the security people were starting to question some issues that were starting to be found in the codebase. Note, one of the subsystems for this driver, the "VOP" code, will probably come back in future kernel versions as it was looking to potentially solve some PCIe virtualization issues that a number of other vendors were wanting to solve. But as-is, this codebase didn't work for anyone else so no actual functionality is being removed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: cti: Initialize dynamic sysfs attributes coresight: Fix uninitialised pointer bug in etm_setup_aux() coresight: add module license misc: mic: remove the MIC drivers interconnect: qcom: use icc_sync state for sm8[12]50 interconnect: qcom: Ensure that the floor bandwidth value is enforced interconnect: qcom: sc7180: Init BCMs before creating the nodes interconnect: qcom: sdm845: Init BCMs before creating the nodes interconnect: Aggregate before setting initial bandwidth interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
2020-11-01Merge tag 'staging-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for issues that have been reported in 5.10-rc1: - octeon driver fixes - wfx driver fixes - memory leak fix in vchiq driver - fieldbus driver bugfix - comedi driver bugfix All of these have been in linux-next with no reported issues" * tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fieldbus: anybuss: jump to correct label in an error path staging: wfx: fix test on return value of gpiod_get_value() staging: wfx: fix use of uninitialized pointer staging: mmal-vchiq: Fix memory leak for vchiq_instance staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice staging: octeon: Drop on uncorrectable alignment or FCS error staging: octeon: repair "fixed-link" support
2020-11-01Merge tag 'tty-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for reported issues for 5.10-rc2. They include: - vt ioctl bugfix for reported problems - fsl_lpuart serial driver fix - 21285 serial driver bugfix All have been in linux-next with no reported issues" * tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt_ioctl: fix GIO_UNIMAP regression vt: keyboard, extend func_buf_lock to readers vt: keyboard, simplify vt_kdgkbsent tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A tty: serial: 21285: fix lockup on open
2020-11-01Merge tag 'usb-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of small bugfixes for reported issues in some USB drivers. They include: - typec bugfixes - xhci bugfixes and lockdep warning fixes - cdc-acm driver regression fix - kernel doc fixes - cdns3 driver bugfixes for a bunch of reported issues - other tiny USB driver fixes All have been in linux-next with no reported issues" * tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension xhci: Don't create stream debugfs files with spinlock held. usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC xhci: Fix sizeof() mismatch usb: typec: stusb160x: fix signedness comparison issue with enum variables usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x USB: apple-mfi-fastcharge: don't probe unhandled devices usbcore: Check both id_table and match() when both available usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe() usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe usb: typec: tcpm: reset hard_reset_count for any disconnect usb: cdc-acm: fix cooldown mechanism usb: host: fsl-mph-dr-of: check return of dma_set_mask() usb: fix kernel-doc markups usb: typec: stusb160x: fix some signedness bugs usb: cdns3: Variable 'length' set but not used
2020-10-31Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull vhost fixes from Michael Tsirkin: "Fixes all over the place. A new UAPI is borderline: can also be considered a new feature but also seems to be the only way we could come up with to fix addressing for userspace - and it seems important to switch to it now before userspace making assumptions about addressing ability of devices is set in stone" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpasim: allow to assign a MAC address vdpasim: fix MAC address configuration vdpa: handle irq bypass register failure case vdpa_sim: Fix DMA mask Revert "vhost-vdpa: fix page pinning leakage in error path" vdpa/mlx5: Fix error return in map_direct_mr() vhost_vdpa: Return -EFAULT if copy_from_user() fails vdpa_sim: implement get_iova_range() vhost: vdpa: report iova range vdpa: introduce config op to get valid iova range
2020-10-31Merge tag 'flexible-array-conversions-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members" * tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: printk: ringbuffer: Replace zero-length array with flexible-array member net/smc: Replace zero-length array with flexible-array member net/mlx5: Replace zero-length array with flexible-array member mei: hw: Replace zero-length array with flexible-array member gve: Replace zero-length array with flexible-array member Bluetooth: btintel: Replace zero-length array with flexible-array member scsi: target: tcmu: Replace zero-length array with flexible-array member ima: Replace zero-length array with flexible-array member enetc: Replace zero-length array with flexible-array member fs: Replace zero-length array with flexible-array member Bluetooth: Replace zero-length array with flexible-array member params: Replace zero-length array with flexible-array member tracepoint: Replace zero-length array with flexible-array member platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member dmaengine: ti-cppi5: Replace zero-length array with flexible-array member
2020-10-31Merge tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fix from Christoph Hellwig: "Fix an integer overflow on 32-bit platforms in the new DMA range code (Geert Uytterhoeven)" * tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n
2020-10-31Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four driver fixes and one core fix. The core fix closes a race window where we could kick off a second asynchronous scan because the test and set of the variable preventing it isn't atomic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Stop using queue #0 always for v2 hw scsi: ibmvscsi: Fix potential race after loss of transport scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove() scsi: qla2xxx: Return EBUSY on fcport deletion scsi: core: Don't start concurrent async scan on same host
2020-10-30Merge tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - null_blk zone fixes (Damien, Kanchan) - NVMe pull request from Christoph: - improve zone revalidation (Keith Busch) - gracefully handle zero length messages in nvme-rdma (zhenwei pi) - nvme-fc error handling fixes (James Smart) - nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)" - xsysace platform fixes (Andy) - scatterlist type cleanup (David) - blk-cgroup memory fixes (Gabriel) - nbd block size update fix (Ming) - Flush completion state fix (Ming) - bio_add_hw_page() iteration fix (Naohiro) * tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-block: blk-mq: mark flush request as IDLE in flush_end_io() lib/scatterlist: use consistent sg_copy_buffer() return type xsysace: use platform_get_resource() and platform_get_irq_optional() null_blk: Fix locking in zoned mode null_blk: Fix zone reset all tracing nbd: don't update block size after device is started block: advance iov_iter on bio_add_hw_page failure null_blk: synchronization fix for zoned device nvmet: fix a NULL pointer dereference when tracing the flush command nvme-fc: remove nvme_fc_terminate_io() nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery nvme-fc: remove err_work work item nvme-fc: track error_recovery while connecting nvme-rdma: handle unexpected nvme completion data length nvme: ignore zone validate errors on subsequent scans blk-cgroup: Pre-allocate tree node on blkg_conf_prep blk-cgroup: Fix memleak on error path
2020-10-30mei: hw: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-30gve: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct gve_stats_report, instead of a zero-length array, and use the struct_size() helper to calculate the size for the resource allocation. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-30Bluetooth: btintel: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-30Merge tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull libata fix from Jens Axboe: "Single fix for an old regression with sata_nv" * tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block: ata: sata_nv: Fix retrieving of active qcs
2020-10-30Merge tag 'arm-soc-fixes-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a fairly large set of bug fixes on top of -rc1, as most of them were ready but didn't quite make it into the last-minute pull requests for the merge window. Allwinner: - fix for incorrect CPU overtemperature limit Amlogic: - multiple smaller DT bugfixes, and missing device nodes Marvell EBU: - add missing aliases for ethernet switch ports on espressobin board Marvell MMP: - DTC warning fix - bugfix for camera interface power-down NXP i.MX: - re-enable the GPIO driver on all defconfigs ST STM32MP1: - fix random crashes from incorrect voltage settings Synaptics Berlin: - enable the correct hardware timer driver Texas Instruments K2G: - fix a boot regression in the power domain code TEE drivers: - fix regression in TEE "login" method SCMI drivers: - multiple code fixes for corner cases in newly added code MAINTAINERS file: - move Kukjin Kim and Sangbeom Kim to credits (used to work on Samsung Exynos) - Masahiro Yamada is stepping down as Uniphier maintainer I did not include a series of patches that work around a regression caused by a bugfix in an ethernet phy driver that resulted in an inadvertent DT binding change. This is still under discussion" * tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: ti: ti_sci_pm_domains: check for proper args count in xlate ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios" ARM: dts: mmp3: Add power domain for the camera arm64: berlin: Select DW_APB_TIMER_OF dt-bindings: sram: sunxi-sram: add V3s compatible string MAINTAINERS: Move Sangbeom Kim to credits MAINTAINERS: Move Kukjin Kim to credits MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default arm64: defconfig: Build in CONFIG_GPIO_MXC by default arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: amlogic: add missing ethernet reset ID firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications ...
2020-10-30Merge tag 'pnp-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull PNP fix from Rafael Wysocki: "Make function names in kerneldoc comments match the actual names of the functions that they correspond to (Mauro Carvalho Chehab)" * tag 'pnp-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PNP: fix kernel-doc markups
2020-10-30Merge tag 'devprop-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fixes from Rafael Wysocki: "Fix the secondary firmware node handling while manipulating the primary firmware node for a given device (Andy Shevchenko)" * tag 'devprop-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Don't clear secondary pointer for shared primary firmware node device property: Keep secondary firmware node secondary by type
2020-10-30Merge tag 'acpi-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix three assorted minor issues. Specifics: - Eliminate compiler warning emitted when building the ACPI dock driver (Arnd Bergmann). - Drop lid_init_state quirk for Acer SW5-012 that is not needed any more after recent changes (Hans de Goede). - Fix "missing minus" typo in the NFIT parsing code (Zhang Qilong)" * tag 'acpi-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: button: Drop no longer necessary Acer SW5-012 lid_init_state quirk ACPI: NFIT: Fix comparison to '-ENXIO' ACPI: dock: fix enum-conversion warning
2020-10-30Merge tag 'pm-5.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a few issues related to running intel_pstate in the passive mode with HWP enabled, correct the handling of the max_cstate module parameter in intel_idle and make a few janitorial changes. Specifics: - Modify Kconfig to prevent configuring either the "conservative" or the "ondemand" governor as the default cpufreq governor if intel_pstate is selected, in which case "schedutil" is the default choice for the default governor setting (Rafael Wysocki). - Modify the cpufreq core, intel_pstate and the schedutil governor to avoid missing updates of the HWP max limit when intel_pstate operates in the passive mode with HWP enabled (Rafael Wysocki). - Fix max_cstate module parameter handling in intel_idle for processor models with C-state tables coming from ACPI (Chen Yu). - Clean up assorted pieces of power management code (Jackie Zamow, Tom Rix, Zhang Qilong)" * tag 'pm-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: schedutil: Always call driver if CPUFREQ_NEED_UPDATE_LIMITS is set cpufreq: Introduce cpufreq_driver_test_flags() cpufreq: speedstep: remove unneeded semicolon PM: sleep: fix typo in kernel/power/process.c intel_idle: Fix max_cstate for processor models without C-state tables cpufreq: intel_pstate: Avoid missing HWP max updates in passive mode cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flag cpufreq: Avoid configuring old governors as default with intel_pstate cpufreq: e_powersaver: remove unreachable break
2020-10-30Merge tag 'mmc-v5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - sdhci: Fix performance regression with auto CMD auto select - sdhci-of-esdhc: Fix initialization for eMMC HS400 mode - sdhci-of-esdhc: Fix timeout bug for tuning commands * tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-esdhc: make sure delay chain locked for HS400 mmc: sdhci-of-esdhc: set timeout to max before tuning mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is true
2020-10-30Merge tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "A busier rc2 than normal, have larger sets of fixes for amdgpu + nouveau, along with some i915, docs, core, panel, sun4i, v3d, vc4 fixes. Nothing spooky though or pumpkin related. docs: - kernel doc fixes core: - fix shmem helpers dma-buf mmap bug amdgpu: - Add new navi1x PCI ID - GPUVM reserved area fixes - Misc display fixes - Fix bad interactions between display code and CONFIG_KGDB - Fixes for SMU manual fan control and i2c nouveau: - endian regression fix for old gpus - buffer object refcount fix - uapi start/end alignment fix - display notifier fix - display clock checking fixes i915: - Fix max memory region size calculation - Restore ILK-M RPS support, restoring performance - Reject 90/270 degreerotated initial fbs panel: - mantix reset fixes sun4i: - scalar fix vc4: - hdmi audio fixes v3d: - fix double free" * tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid() drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid() drm/nouveau/device: fix changing endianess code to work on older GPUs drm/nouveau/gem: fix "refcount_t: underflow; use-after-free" drm/nouveau/kms/nv50-: Program notifier offset before requesting disp caps drm/nouveau/nouveau: fix the start/end range for migration drm/i915: Reject 90/270 degree rotated initial fbs drm/i915: Restore ILK-M RPS support drm/i915/region: fix max size calculation drm/vc4: Rework the structure conversion functions drm/vc4: hdmi: Add a name to the codec DAI component drm/shme-helpers: Fix dma_buf_mmap forwarding bug drm/vc4: hdmi: Avoid sleeping in atomic context drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1x drm/amd/pm: fix the wrong fan speed in fan1_input drm/amdgpu/swsmu: drop smu i2c bus on navi1x drm/vc4: drv: Add error handding for bind drm: drm_print.h: fix kernel-doc markups drm: kernel-doc: drm_dp_helper.h: fix a typo drm: kernel-doc: add description for a new function parameter ...
2020-10-30Merge branches 'acpi-button' and 'acpi-dock'Rafael J. Wysocki
* acpi-button: ACPI: button: Drop no longer necessary Acer SW5-012 lid_init_state quirk * acpi-dock: ACPI: dock: fix enum-conversion warning
2020-10-30Merge branches 'pm-cpuidle' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: intel_idle: Fix max_cstate for processor models without C-state tables * pm-sleep: PM: sleep: fix typo in kernel/power/process.c
2020-10-30Merge tag 'icc-5.10-rc2' of ↵Greg Kroah-Hartman
https://git.linaro.org/people/georgi.djakov/linux into char-misc-linus Georgi writes: interconnect fixes for v5.10 This contains one core fix and a few driver fixes. - Fix the core to perform also aggregation when setting the initial bandwidth with sync_state. - Fixes in some drivers to make sure the correct sequence is used for initialization when we use sync_state. - Fix in the sdm845 driver to prevent a board hang that was hit when bandwidth scaling for display and multimedia was enabled. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.10-rc2' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: use icc_sync state for sm8[12]50 interconnect: qcom: Ensure that the floor bandwidth value is enforced interconnect: qcom: sc7180: Init BCMs before creating the nodes interconnect: qcom: sdm845: Init BCMs before creating the nodes interconnect: Aggregate before setting initial bandwidth interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
2020-10-30Merge tag 'usb-v5.10-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: 4 bug fixes for Cadence 3 driver. The biggest fix is changing endpoint configuration method to avoid FIFO overflow at multiple endpoints situation. * tag 'usb-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension usb: cdns3: Variable 'length' set but not used
2020-10-30vdpasim: allow to assign a MAC addressLaurent Vivier
Add macaddr parameter to the module to set the MAC address to use Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201029122050.776445-3-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpasim: fix MAC address configurationLaurent Vivier
vdpa_sim generates a ramdom MAC address but it is never used by upper layers because the VIRTIO_NET_F_MAC bit is not set in the features list. Because of that, virtio-net always regenerates a random MAC address each time it is loaded whereas the address should only change on vdpa_sim load/unload. Fix that by adding VIRTIO_NET_F_MAC in the features list of vdpa_sim. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Cc: jasowang@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201029122050.776445-2-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpa: handle irq bypass register failure caseZhu Lingshan
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as a unused variable, so suggest we remove it. Actually it stores return value of irq_bypass_register_producer(), but we did not check it, we should handle the failure case. This commit will print a message if irq bypass register producer fail, in this case, vqs still remain functional. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20201023104046.404794-1-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vdpa_sim: Fix DMA maskLaurent Vivier
Since commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") an error is reported when we load vdpa_sim and virtio-vdpa: [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 It seems that dma_mask is not initialized. This patch initializes dma_mask() and calls dma_set_mask_and_coherent() to fix the problem. Full log: [ 128.548628] ------------[ cut here ]------------ [ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0 [ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log [ 128.562188] dm_mod [ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000 [ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0 [ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 128.767247] PKRU: 55555554 [ 128.769961] Call Trace: [ 128.772418] virtqueue_add+0x81e/0xb00 [ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30 [ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 128.785509] virtnet_open+0xf9/0x180 [virtio_net] [ 128.790217] __dev_open+0xe8/0x180 [ 128.793620] __dev_change_flags+0x1a7/0x210 [ 128.797808] dev_change_flags+0x21/0x60 [ 128.801646] do_setlink+0x328/0x10e0 [ 128.805227] ? __nla_validate_parse+0x121/0x180 [ 128.809757] ? __nla_parse+0x21/0x30 [ 128.813338] ? inet6_validate_link_af+0x5c/0xf0 [ 128.817871] ? cpumask_next+0x17/0x20 [ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 128.826676] ? __nla_validate_parse+0x47/0x180 [ 128.831120] __rtnl_newlink+0x541/0x8e0 [ 128.834962] ? __nla_reserve+0x38/0x50 [ 128.838713] ? security_sock_rcv_skb+0x2a/0x40 [ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0 [ 128.847518] ? netlink_attachskb+0x1d8/0x220 [ 128.851793] ? skb_queue_tail+0x1b/0x50 [ 128.855641] ? fib6_clean_node+0x43/0x170 [ 128.859652] ? _cond_resched+0x15/0x30 [ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 128.868110] rtnl_newlink+0x43/0x60 [ 128.871602] rtnetlink_rcv_msg+0x12c/0x380 [ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110 [ 128.880147] netlink_rcv_skb+0x50/0x100 [ 128.883987] netlink_unicast+0x1a5/0x280 [ 128.887913] netlink_sendmsg+0x23d/0x470 [ 128.891839] sock_sendmsg+0x5b/0x60 [ 128.895331] ____sys_sendmsg+0x1ef/0x260 [ 128.899255] ? copy_msghdr_from_user+0x5c/0x90 [ 128.903702] ___sys_sendmsg+0x7c/0xc0 [ 128.907369] ? dev_forward_change+0x130/0x130 [ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40 [ 128.916616] ? new_sync_write+0x11f/0x1b0 [ 128.920628] ? mntput_no_expire+0x47/0x240 [ 128.924727] __sys_sendmsg+0x57/0xa0 [ 128.928309] do_syscall_64+0x33/0x40 [ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 128.936937] RIP: 0033:0x7f88792e3857 [ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59 [ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020 [ 129.018571] Call Trace: [ 129.021027] dump_stack+0x57/0x6a [ 129.024346] __warn.cold.14+0xe/0x3d [ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0 [ 129.032283] report_bug+0xbd/0xf0 [ 129.035602] handle_bug+0x44/0x80 [ 129.038922] exc_invalid_op+0x13/0x60 [ 129.042589] asm_exc_invalid_op+0x12/0x20 [ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0 [ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa [ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246 [ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000 [ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000 [ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 [ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8 [ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940 [ 129.111200] virtqueue_add+0x81e/0xb00 [ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30 [ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net] [ 129.124280] virtnet_open+0xf9/0x180 [virtio_net] [ 129.128984] __dev_open+0xe8/0x180 [ 129.132390] __dev_change_flags+0x1a7/0x210 [ 129.136575] dev_change_flags+0x21/0x60 [ 129.140415] do_setlink+0x328/0x10e0 [ 129.143994] ? __nla_validate_parse+0x121/0x180 [ 129.148528] ? __nla_parse+0x21/0x30 [ 129.152107] ? inet6_validate_link_af+0x5c/0xf0 [ 129.156639] ? cpumask_next+0x17/0x20 [ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110 [ 129.165443] ? __nla_validate_parse+0x47/0x180 [ 129.169890] __rtnl_newlink+0x541/0x8e0 [ 129.173731] ? __nla_reserve+0x38/0x50 [ 129.177483] ? security_sock_rcv_skb+0x2a/0x40 [ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0 [ 129.186286] ? netlink_attachskb+0x1d8/0x220 [ 129.190560] ? skb_queue_tail+0x1b/0x50 [ 129.194401] ? fib6_clean_node+0x43/0x170 [ 129.198411] ? _cond_resched+0x15/0x30 [ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420 [ 129.206869] rtnl_newlink+0x43/0x60 [ 129.210361] rtnetlink_rcv_msg+0x12c/0x380 [ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110 [ 129.218908] netlink_rcv_skb+0x50/0x100 [ 129.222747] netlink_unicast+0x1a5/0x280 [ 129.226672] netlink_sendmsg+0x23d/0x470 [ 129.230599] sock_sendmsg+0x5b/0x60 [ 129.234090] ____sys_sendmsg+0x1ef/0x260 [ 129.238015] ? copy_msghdr_from_user+0x5c/0x90 [ 129.242461] ___sys_sendmsg+0x7c/0xc0 [ 129.246128] ? dev_forward_change+0x130/0x130 [ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40 [ 129.255368] ? new_sync_write+0x11f/0x1b0 [ 129.259381] ? mntput_no_expire+0x47/0x240 [ 129.263478] __sys_sendmsg+0x57/0xa0 [ 129.267058] do_syscall_64+0x33/0x40 [ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 129.275689] RIP: 0033:0x7f88792e3857 [ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 [ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857 [ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c [ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000 [ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000 [ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c [ 129.341249] ---[ end trace c551e8028fbaf59d ]--- [ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12 [ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12 Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201027175914.689278-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30Revert "vhost-vdpa: fix page pinning leakage in error path"Michael S. Tsirkin
This reverts commit 7ed9e3d97c32d969caded2dfb6e67c1a2cc5a0b1. The patch creates a DoS risk since it can result in a high order memory allocation. Fixes: 7ed9e3d97c32d ("vhost-vdpa: fix page pinning leakage in error path") Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30vdpa/mlx5: Fix error return in map_direct_mr()Jing Xiangfeng
Fix to return the variable "err" from the error handling case instead of "ret". Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Link: https://lore.kernel.org/r/20201026070637.164321-1-jingxiangfeng@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30vhost_vdpa: Return -EFAULT if copy_from_user() failsDan Carpenter
The copy_to/from_user() functions return the number of bytes which we weren't able to copy but the ioctl should return -EFAULT if they fail. Fixes: a127c5bbb6a8 ("vhost-vdpa: fix backend feature ioctls") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201023120853.GI282278@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com>
2020-10-30usb: cdns3: gadget: own the lock wrongly at the suspend routinePeter Chen
When the system goes to suspend, if the controller is at device mode with cable connecting to host, the call stack is: cdns3_suspend-> cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget is called, it owns lock wrongly, it causes the system being deadlock after resume due to at cdns3_device_thread_irq_handler, it tries to get the lock, but can't get it forever. To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget, and do it at the caller. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: stable@vger.kernel.org#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30Merge tag 'drm-intel-fixes-2020-10-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix max memory region size calculation (Matt) - Restore ILK-M RPS support, restoring performance (Ville) - Reject 90/270 degreerotated initial fbs (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201030004442.GA146813@intel.com
2020-10-30Merge branch 'linux-5.10' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Fixes an endian regression on older GPUs, a refcount overflow, a migration fix and 3 display fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv6MOjtgzKchpis1XrZYmu7-6CaxnHVzJKOXPH62_em7tw@mail.gmail.com
2020-10-30Merge tag 'drm-misc-fixes-2020-10-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes First round of drm-misc-fixes with a couple of leftovers from drm-misc-fixes next. Some reset fixes for the mantix panel, some fixes for a scaler issue on sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio related) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
2020-10-30drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()Lyude Paul
While I thought I had this correct (since it actually did reject modes like I expected during testing), Ville Syrjala from Intel pointed out that the logic here isn't correct. max_clock refers to the max data rate supported by the DP encoder. So, limiting it to the output of ds_clock (which refers to the maximum dotclock of the downstream DP device) doesn't make any sense. Additionally, since we're using the connector's bpc as the canonical BPC we should use this in mode_valid until we support dynamically setting the bpp based on bandwidth constraints. https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html For more info. So, let's rewrite this using Ville's advice. v2: * Ville pointed out I mixed up the dotclock and the link rate. So fix that... * ...and also rename all the variables in this function to be more appropriately labeled so I stop mixing them up. * Reuse the bpp from the connector for now until we have dynamic bpp selection. * Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we should also have been doing from the start Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()Lyude Paul
Ville also pointed out that I got a lot of the logic here wrong as well, whoops. While I don't think anyone's likely using 3D output with nouveau, the next patch will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get rid of it and open-code it like before, while taking care to move the 3D frame packing calculations on the dot clock into the right place. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/device: fix changing endianess code to work on older GPUsKarol Herbst
With this we try to detect if the endianess switch works and assume LE if not. Suggested by Ben. Fixes: 51c05340e407 ("drm/nouveau/device: detect if changing endianness failed") Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"Karol Herbst
we can't use nouveau_bo_ref here as no ttm object was allocated and nouveau_bo_ref mainly deals with that. Simply deallocate the object. Signed-off-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/kms/nv50-: Program notifier offset before requesting disp capsLyude Paul
Not entirely sure why this never came up when I originally tested this (maybe some BIOSes already have this setup?) but the ->caps_init vfunc appears to cause the display engine to throw an exception on driver init, at least on my ThinkPad P72: nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b This is magic nvidia speak for "You need to have the DMA notifier offset programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix this by doing that, and also perform an update afterwards to prevent racing with the GPU when reading capabilities. v2: * Don't just program the DMA notifier offset, make sure to actually perform an update v3: * Don't call UPDATE() * Actually read the correct notifier fields, as apparently the CAPABILITIES_DONE field lives in a different location than the main NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different CAPABILITIES_DONE field then pre-907d cards. v4: * Don't forget to check the return value of core507d_read_caps() v5: * Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY * Disable notifier after calling GetCapabilities() Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 4a2cb4181b07 ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-30drm/nouveau/nouveau: fix the start/end range for migrationRalph Campbell
The user level OpenCL code shouldn't have to align start and end addresses to a page boundary. That is better handled in the nouveau driver. The npages field is also redundant since it can be computed from the start and end addresses. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-10-29scsi: target: tcmu: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29enetc: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-10-29soc: ti: ti_sci_pm_domains: check for proper args count in xlateTero Kristo
K2G devices still only use single parameter for power-domains property, so check for this properly in the driver. Without this, every peripheral fails to probe resulting in boot failure. Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one") Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:48:08 +0000