summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-11-07mmc: sdhci-s3c: fix the card detection in runtime-pmSeungwon Jeon
If host clock is disabled, host cannot detect a card in case of using CD internal for detection. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-s3c: use clk_prepare_enable and clk_disable_unprepareThomas Abraham
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-endArnd Bergmann
The of_device_id match data is now marked as const and must not be modified. This changes the dw_mmc to mark all pointers passing the dw_mci_drv_data or dw_mci_dma_ops structures as const, and also marks the static definitions as const. drivers/mmc/host/dw_mmc-exynos.c: In function 'dw_mci_exynos_probe': drivers/mmc/host/dw_mmc-exynos.c:234:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix modular build for exynos back-endArnd Bergmann
The MODULE_DEVICE_TABLE entry for dw_mci_exynos_match was incorrectly copied from the platform back-end, which causes this error when building the driver as a loadable module: drivers/mmc/host/dw_mmc-exynos.c: At top level: drivers/mmc/host/dw_mmc-exynos.c:226:34: error: '__mod_of_device_table' aliased to undefined symbol 'dw_mci_pltfm_match' This patch fixes the problem by just using the correct string. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci: fix NULL dereference in sdhci_request() tuningChris Ball
Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: stable <stable@vger.kernel.org> [3.3+]
2012-11-07mmc: sdhci: fix IS_ERR() checking of regulator_get()Kevin Liu
There are two problems here: The check for vmmc was printing an unnecessary pr_info() when host->vmmc is NULL. The intent of the check for vqmmc was to only remove UHS if we have a regulator that doesn't support the required voltage, but since IS_ERR() doesn't catch NULL, we were actually removing UHS modes if vqmmc isn't present at all -- since it isn't present for most users, this breaks UHS for them. This patch fixes that UHS regression in 3.7-rc1. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Bin Wang <binw@marvell.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: fix sdhci-dove probe/removalRussell King - ARM Linux
1. Never ever publish a device in the system before it has been setup to a usable state. 2. Unregister the device _BEFORE_ taking away any resources it may be using. 3. Don't check clks against NULL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sh_mmcif: fix use after freeGuennadi Liakhovetski
A recent commit "mmc: sh_mmcif: fix clock management" has introduced a use after free bug in sh_mmcif.c: in sh_mmcif_remove() the call to mmc_free_host() frees private driver data, therefore using it afterwards is a bug. Revert that hunk. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org [3.6] Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-pci: fix 'Invalid iomem size' error message conditionAdrian Hunter
The SDHCI standard defines a 256 byte register set but a device that specifies a larger iomem region is not an error. Alter the message condition accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: mxcmmc: Fix MODULE_ALIASFabio Estevam
The correct name for the driver is "mxc-mmc". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix NULL pointer dereference for dt bootBalaji T K
dev->platform_data is NULL in case of device tree boot, instead use the saved version in struct omap_hsmmc_host. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix host reference after mmc_free_hostBalaji T K
struct omap_hsmmc_host *host should not be accessed after mmc_free_host(). Reorder mmc_free_host() after iounmap(host->base). Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix multiple drv_data NULL dereferencesJames Hogan
800d78bfccb3d ("mmc: dw_mmc: add support for implementation specific callbacks") -- merged in v3.7-rc1 -- introduced multiple NULL pointer dereferences when the default dw_mci_pltfm_probe() is used, as it sets host->drv_data to NULL, and that's only checked against NULL in 1 out of the 7 cases where it is dereferenced. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: enable controller interrupt before calling mmc_start_hostYuvaraj CD
As mmc_start_host is getting called before enabling the dw_mmc controller interrupt, there is a problem of missing the SDMMC_INT_CMD_DONE for the very first command sent by the sdio_reset. This problem occurs only when we disable MMC debugging i.e, MMC_DEBUG=n. This patch enables the dw_mmc controller interrupt before mmc_start_host. Signed-off-by: Yuvaraj CD <yuvaraj.cd@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCsJerry Huang
CMD23 causes lots of errors in kernel on some freescale SoCs (P1020, P1021, P1022, P1024, P1025 and P4080) when MMC card used, which is because these controllers does not support CMD23, even on the SoCs which declares CMD23 is supported. Therefore, we'll not use CMD23. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: remove _dev_info compile warningSeungwon Jeon
This patch removes the following warning. drivers/mmc/host/dw_mmc.c:1976: warning: passing argument 1 of '_dev_info' from incompatible pointer type Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07xen/generic: Disable fallback build on ARM.Konrad Rzeszutek Wilk
As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07xen/events: fix RCU warning, or Call idle notifier after irq_enter()Mojiong Qiu
exit_idle() should be called after irq_enter(), otherwise it throws: [ INFO: suspicious RCU usage. ] 3.6.5 #1 Not tainted ------------------------------- include/linux/rcupdate.h:725 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffff810e9fe0>] __atomic_notifier_call_chain+0x0/0x140 stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.6.5 #1 Call Trace: <IRQ> [<ffffffff811259a2>] lockdep_rcu_suspicious+0xe2/0x130 [<ffffffff810ea10c>] __atomic_notifier_call_chain+0x12c/0x140 [<ffffffff810e9fe0>] ? atomic_notifier_chain_unregister+0x90/0x90 [<ffffffff811216cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810ea136>] atomic_notifier_call_chain+0x16/0x20 [<ffffffff810777c3>] exit_idle+0x43/0x50 [<ffffffff81568865>] xen_evtchn_do_upcall+0x25/0x50 [<ffffffff81aa690e>] xen_do_hypervisor_callback+0x1e/0x30 <EOI> [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff81061540>] ? xen_safe_halt+0x10/0x20 [<ffffffff81075cfa>] ? default_idle+0xba/0x570 [<ffffffff810778af>] ? cpu_idle+0xdf/0x140 [<ffffffff81a4d881>] ? rest_init+0x135/0x144 [<ffffffff81a4d74c>] ? csum_partial_copy_generic+0x16c/0x16c [<ffffffff82520c45>] ? start_kernel+0x3db/0x3e8 [<ffffffff8252066a>] ? repair_env_string+0x5a/0x5a [<ffffffff82520356>] ? x86_64_start_reservations+0x131/0x135 [<ffffffff82524aca>] ? xen_start_kernel+0x465/0x46 Git commit 98ad1cc14a5c4fd658f9d72c6ba5c86dfd3ce0d5 Author: Frederic Weisbecker <fweisbec@gmail.com> Date: Fri Oct 7 18:22:09 2011 +0200 x86: Call idle notifier after irq_enter() did this, but it missed the Xen code. Signed-off-by: Mojiong Qiu <mjqiu@tencent.com> Cc: stable@vger.kernel.org # from 3.3 and newer. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07drm/radeon/dce3: switch back to old pll allocation order for discreteAlex Deucher
The order shouldn't matter, but this seems to cause regressions for certain specific cases. This should fix it for now. We probably need to investigate a proper fix in the next development cycle. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Andy Furniss <andyqos@ukfsn.org>
2012-11-07Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix chip feature table headers hwmon: (w83627ehf) Force initial bank selection
2012-11-07drm/radeon: fix typo in evergreen_mc_resume()Alex Deucher
Add missing index that may have led us to enabling more crtcs than necessary. May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07drm: set dev_mapping before calling drm_open_helperIlija Hadzic
Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.html Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reported-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07drm: restore open_count if drm_setup failsIlija Hadzic
If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-06sparc: Allow OF_GPIO on sparc.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06s390/cio: fix length calculation in idset.cSebastian Ott
bitmap_or uses the number of bits as its length parameter and not the number of words necessary to store those bits. This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions Reported-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06pinctrl: samsung and exynos need to depend on OF && GPIOLIBAxel Lin
This patch fixes below build error when !CONFIG_OF_GPIO. CC drivers/pinctrl/pinctrl-samsung.o drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_pinctrl_parse_dt_pins': drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable 'prop' [-Wunused-variable] drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/pinctrl-samsung.c:797:5: error: 'struct gpio_chip' has no member named 'of_node' make[2]: *** [drivers/pinctrl/pinctrl-samsung.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 The samsung pinctrl driver supports only device tree enabled platforms. Thus make PINCTRL_SAMSUNG depend on OF && GPIOLIB. The reason to depend on GPIOLIB is CONFIG_OF_GPIO only available when GPIOLIB is selected. Since PINCTRL_EXYNOS4 select PINCTRL_SAMSUNG, thus also make PINCTRL_EXYNOS4 depend on OF && GPIOLIB. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05PCI/portdrv: Don't create hotplug slots unless port supports hotplugTaku Izumi
Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test, so now we create hotplug slots even for PCIe port devices that don't support hotplug. This patch fixes this problem. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
2012-11-05hwmon: Fix chip feature table headersJean Delvare
These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-11-05hwmon: (w83627ehf) Force initial bank selectionJean Delvare
Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org
2012-11-05PCI/PM: Fix proc config reg access for D3cold and bridge suspendingHuang Ying
In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <cybercyst@gmail.com> Reported-by: Peter <lekensteyn@gmail.com> Reported-by: Micael Dias <kam1kaz3@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-11-05pinctrl: SPEAr1340: Add clcd sleep mode pin configurationVipul Kumar Samar
CLCD pads must be configured differently for sleep mode. This patch adds support for clcd_sleep_pingroup. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1340: Make DDR reset & clock pads as gpioDeepak Sikri
Some gpio pins are used to control DDR reset and clock enable while the system is moved into Low power. This patch adds in the corresponding GPIO entries in the pads_as_gpio_pins to ensure the pads are available as gpio's. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: add register entries for enabling pad directionShiraz Hashim
Pad direction must also be updated for SPEAr1310, while setting pads values. This patch adds support for that. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin groupVipul Kumar Samar
SPEAr1310 has separate PCI and PCIe implementations which are not muxed with each other. Presently they have been implemented as muxed together with SATA and are represented wrongly in the software. In reality only PCIe and SATA implementations are muxed with each other. This patch separates out pci pins creating a new pingroup and function for pci. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFTVipul Kumar Samar
This patch fixes two macros: PERIP_CFG registers offset and MCIF selection shift. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: fix clcd high resolution pin group nameShiraz Hashim
All group names in SPEAr pinctrl have "_grp" at the end of their name. Do the same for clcd_high_res_grp. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr320: Correct pad mux entries for rmii/smiiDeepak Sikri
pin entries of rmii and smii are interchanged by mistake. Fix it. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr3xx: correct register space to configure pwmShiraz Hashim
To have pwm on pad no. 34 we also need to select between pwm and SD_LED functions. Add this to pwm pin mux register configuration. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disableViresh Kumar
Not all bits of a register are used for pinctrl in SPEAr. So only update bits relevant to pinctrl using muxreg->mask. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04xen/hypercall: fix hypercall fallback code for very old hypervisorsJan Beulich
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management & ACPI update from Zhang Rui, Ho humm. Normally these things go through Len. But it's just three small fixes, I guess I can pull directly too. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. ACPI video: Ignore errors after _DOD evaluation. thermal: solve compilation errors in rcar_thermal
2012-11-03Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "Two patches are usual stuff. The bigger patch is needed to correct a wrong decision made in this merge window. We hoped to get the PIOQUEUE mode in the mxs driver working with DMA, but it turned out to be too broken (leading to data loss), so we now think it is best to remove it entirely and work only with DMA now. The patch should be in 3.7. IMO, so users never get the chance to use both modes in parallel." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: tegra: set irq name as device name i2c-nomadik: Fixup clock handling i2c: mxs: remove broken PIOQUEUE support
2012-11-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Scattered selection of fixes: - radeon: load detect fixes from SuSE/AMD - intel: misc i830, sdvo regression, vesafb kickoff ums fix - exynos: maintainers entry update + fixes - udl: fix stride scanout issue it's slightly bigger than I'd probably like, but nothing looked dangerous enough to hold off on." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix stride issues scanning out stride != width*bpp drm/radeon: add load detection support for ext DAC on R200 (v2) DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms(). DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips. DRM/Radeon: Clean up code in TV DAC load detection. drm/radeon: fix ATPX function documentation drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon DRM/Radeon: On DVI-I use Load Detection when EDID is bogus. DRM/Radeon: Fix primary DAC Load Detection for RV100 chips. DRM/Radeon: Fix Load Detection on legacy primary DAC. drm: exynos: removed warning due to missing typecast for mixer driver data drm/exynos: add support for ARCH_MULTIPLATFORM MAINTAINERS: Add git repository for Exynos DRM drm/exynos: fix display on issue drm/i915: Only kick out vesafb if we takeover the fbcon with KMS drm/i915: be less verbose about inability to provide vendor backlight drm/i915: clear the entire sdvo infoframe buffer drm/i915: VGA needs to be on pipe A on i830M drm/i915: fix overlay on i830M
2012-11-03net: bnx2x: Fix typo in bnx2x driverMasanari Iida
Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03smsc95xx: fix tx checksum offload for big endianSteve Glendinning
f7b2927 introduced tx checksum offload support for smsc95xx, and enabled it by default. This feature doesn't take endianness into account, so causes most tx to fail on those platforms. This patch fixes the problem fully by adding the missing conversion. An alternate workaround is to disable TX checksum offload on those platforms. The cpu impact of this feature is very low. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03r8169: allow multicast packets on sub-8168f chipset.Nathan Walp
RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp <faceprint@faceprint.com> Suggested-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03r8169: Fix WoL on RTL8168d/8111d.Cyril Brulebois
This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Hinted-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03drivers/net: use tasklet_kill in device remove/close processXiaotian Feng
Some driver uses tasklet_disable in device remove/close process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet because some softirq pressure, the tasklet will placed on the tasklet_vec, never have a chance to excute. This might lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "First post-Sandy pull request" 1) Fix antenna gain handling and initialization of chan->max_reg_power in wireless, from Felix Fietkau. 2) Fix nexthop handling in H.232 conntrack helper, from Julian Anastasov. 3) Only process 80211 mesh config header in certain kinds of frames, from Javier Cardona. 4) 80211 management frame header length needs to be validated, from Johannes Berg. 5) Don't access free'd SKBs in ath9k driver, from Felix Fietkay. 6) Test for permanent state correctly in VXLAN driver, from Stephen Hemminger. 7) BNX2X bug fixes from Yaniv Rosner and Dmitry Kravkov. 8) Fix off by one errors in bonding, from Nikolay ALeksandrov. 9) Fix divide by zero in TCP-Illinois congestion control. From Jesper Dangaard Brouer. 10) TCP metrics code says "Yo dawg, I heard you like sizeof, so I did a sizeof of a sizeof, so you can size your size" Fix from Julian Anastasov. 11) Several drivers do mdiobus_free without first doing an mdiobus_unregister leading to stray pointer references. Fix from Peter Senna Tschudin. 12) Fix OOPS in l2tp_eth_create() error path, it's another danling pointer kinda situation. Fix from Tom Parkin. 13) Hardware driven by the vmxnet driver can't handle larger than 16K fragments, so split them up when necessary. From Eric Dumazet. 14) Handle zero length data length in tcp_send_rcvq() properly. Fix from Pavel Emelyanov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) tcp-repair: Handle zero-length data put in rcv queue vmxnet3: must split too big fragments l2tp: fix oops in l2tp_eth_create() error path cxgb4: Fix unable to get UP event from the LLD drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free bnx2x: fix HW initialization using fw 7.8.x tcp: Fix double sizeof in new tcp_metrics code net: fix divide by zero in tcp algorithm illinois net: sctp: Fix typo in net/sctp bonding: fix second off-by-one error bonding: fix off-by-one error bnx2x: Disable FCoE for 57840 since not yet supported by FW bnx2x: Fix no link on 577xx 10G-baseT bnx2x: Fix unrecognized SFP+ module after driver is loaded bnx2x: Fix potential incorrect link speed provision bnx2x: Restore global registers back to default. bnx2x: Fix link down in 57712 following LFA bnx2x: Fix 57810 1G-KR link against certain switches. ixgbe: PTP get_ts_info missing software support ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:56:46 +0000