summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-08-05fpga: dfl: afu: add AFU state related sysfs interfacesWu Hao
This patch introduces more sysfs interfaces for Accelerated Function Unit (AFU). These interfaces allow users to read current AFU Power State (APx), read / clear AFU Power (APx) events which are sticky to identify transient APx state, and manage AFU's LTR (latency tolerance reporting). Signed-off-by: Ananda Ravuri <ananda.ravuri@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/1564914022-3710-4-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05fpga: dfl: pci: enable SRIOV support.Wu Hao
This patch enables the standard sriov support. It allows user to enable SRIOV (and VFs), then user could pass through accelerators (VFs) into virtual machine or use VFs directly in host. Signed-off-by: Zhang Yi Z <yi.z.zhang@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/1564914022-3710-3-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05fpga: dfl: fme: add DFL_FPGA_FME_PORT_RELEASE/ASSIGN ioctl support.Wu Hao
In order to support virtualization usage via PCIe SRIOV, this patch adds two ioctls under FPGA Management Engine (FME) to release and assign back the port device. In order to safely turn Port from PF into VF and enable PCIe SRIOV, it requires user to invoke this PORT_RELEASE ioctl to release port firstly to remove userspace interfaces, and then configure the PF/VF access register in FME. After disable SRIOV, it requires user to invoke this PORT_ASSIGN ioctl to attach the port back to PF. Ioctl interfaces: * DFL_FPGA_FME_PORT_RELEASE Release platform device of given port, it deletes port platform device to remove related userspace interfaces on PF. After this function, then it's safe to configure PF/VF access mode to VF, and enable VFs via SRIOV. * DFL_FPGA_FME_PORT_ASSIGN Assign platform device of given port back to PF. After configure PF/VF access mode to PF, this ioctl adds port platform device back to re-enable related userspace interfaces on PF. Signed-off-by: Zhang Yi Z <yi.z.zhang@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/1564914022-3710-2-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05w1: omap-hdq: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190802135010.24052-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05w1: mxc_w1: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190802134819.9088-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05parport: parport_serial: Use dev_get_drvdataChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20190801191408.10977-3-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05parport: Add missing newline at end of fileGeert Uytterhoeven
"git diff" says: \ No newline at end of file after modifying the file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20190801191408.10977-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05usb: usbfs: fix double-free of usb memory upon submiturb errorGavin Li
Upon an error within proc_do_submiturb(), dec_usb_memory_use_count() gets called once by the error handling tail and again by free_async(). Remove the first call. Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05usb: yurex: Fix use-after-free in yurex_deleteSuzuki K Poulose
syzbot reported the following crash [0]: BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007 CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x413511 Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48 83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26 R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff Allocated by task 2776: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583 hub_port_connect drivers/usb/core/hub.c:5004 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 16007: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 device_release+0x71/0x200 drivers/base/core.c:1064 kobject_cleanup lib/kobject.c:693 [inline] kobject_release lib/kobject.c:722 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x171/0x280 lib/kobject.c:739 put_device+0x1b/0x30 drivers/base/core.c:2213 usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725 yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881b1859980 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 72 bytes inside of 2048-byte region [ffff8881b1859980, ffff8881b185a180) The buggy address belongs to the page: page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000 raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== A quick look at the yurex_delete() shows that we drop the reference to the usb_device before releasing any buffers associated with the device. Delay the reference drop until we have finished the cleanup. [0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/ Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: andreyknvl@google.com Cc: gregkh@linuxfoundation.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: syzkaller-bugs@googlegroups.com Cc: dtor@chromium.org Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-05drm/rockchip: Suspend DP lateDouglas Anderson
In commit fe64ba5c6323 ("drm/rockchip: Resume DP early") we moved resume to be early but left suspend at its normal time. This seems like it could be OK, but casues problems if a suspend gets interrupted partway through. The OS only balances matching suspend/resume levels. ...so if suspend was called then resume will be called. If suspend late was called then resume early will be called. ...but if suspend was called resume early might not get called. This leads to an unbalance in the clock enables / disables. Lets take the simple fix and just move suspend to be late to match. This makes the PM core take proper care in keeping things balanced. Fixes: fe64ba5c6323 ("drm/rockchip: Resume DP early") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190802184616.44822-1-dianders@chromium.org
2019-08-05HID: input: fix a4tech horizontal wheel custom usageNicolas Saenz Julienne
Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether the previous wheel report was horizontal or vertical. Before c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") this usage was being mapped to 'Relative.Misc'. After the patch it's simply ignored (usage->type == 0 & usage->code == 0). Which ultimately makes hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no usage->type. We shouldn't rely on a mapping for that usage as it's nonstandard and doesn't really map to an input event. So we bypass the mapping and make sure the custom event handling properly handles both reports. Fixes: c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05HID: Add quirk for HP X1200 PIXART OEM mouseSebastian Parschauer
The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Jonathan Teh (@jonathan-teh) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15 Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05HID: holtek: test for sanity of intfdataOliver Neukum
The ioctl handler uses the intfdata of a second interface, which may not be present in a broken or malicious device, hence the intfdata needs to be checked for NULL. [jkosina@suse.cz: fix newly added spurious space] Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05HID: wacom: fix bit shift for Cintiq Companion 2Aaron Armstrong Skomra
The bit indicating BTN_6 on this device is overshifted by 2 bits, resulting in the incorrect button being reported. Also fix copy-paste mistake in comments. Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71 Fixes: c7f0522a1ad1 ("HID: wacom: Slim down wacom_intuos_pad processing") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52István Váradi
The Saitek X52 joystick has a pair of axes that are originally (by the Windows driver) used as mouse pointer controls. The corresponding usage->hid values are 0x50024 and 0x50026. Thus they are handled as unknown axes and both get mapped to ABS_MISC. The quirk makes the second axis to be mapped to ABS_MISC1 and thus made available separately. [jkosina@suse.cz: squashed two patches into one] Signed-off-by: István Váradi <ivaradi@varadiistvan.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devicesHans de Goede
Commit dbcbabf7da92 ("HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices") made logi_dj_recv_query_hidpp_devices return the return value of hid_hw_raw_request instead of unconditionally returning 0. But hid_hw_raw_request returns the report-size on a successful request (and a negative error-code on failure) where as the callers of logi_dj_recv_query_hidpp_devices expect a 0 return on success. This commit fixes things so that either the negative error gets returned or 0 on success, fixing HID++ receivers such as the Logitech nano receivers no longer working. Cc: YueHaibing <yuehaibing@huawei.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: dbcbabf7da92 ("HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices") Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Petr Vorel <pvorel@suse.cz> Tested-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-08-05drm/i915: Fix wrong escape clock divisor init for GLKStanislav Lisovskiy
According to Bspec clock divisor registers in GeminiLake should be initialized by shifting 1(<<) to amount of correspondent divisor. While i915 was writing all this time that value as is. Surprisingly that it by accident worked, until we met some issues with Microtech Etab. v2: Added Fixes tag and cc v3: Added stable to cc as well. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826 Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK") Cc: Deepak M <m.deepak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com (cherry picked from commit ce52ad5dd52cfaf3398058384e0ff94134bbd89c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-08-05drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()Wei Yongjun
'ksv_fifo' is malloced in intel_hdcp_auth_downstream() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: f26ae6a652f2 ("drm/i915: SRM revocation check for HDCP1.4 and 2.2") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704104534.12508-1-weiyongjun1@huawei.com (cherry picked from commit de70fdd7d24cd07e51fbec420f8704d956a47949) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-08-04Merge tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fixes from Jarkko Sakkinen: "Two bug fixes that did not make into my first pull request" * tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: tpm_ibm_vtpm: Fix unallocated banks tpm: Fix null pointer dereference on chip register error path
2019-08-04Merge tag 'mtd/fixes-for-5.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "NAND: - Fix Micron driver as some chips enable internal ECC correction during their discovery while they advertize they do not have any. Hyperbus: - Restrict the build to only ARM64 SoCs (and compile testing) which is what should have been done since the beginning. - Fix Kconfig issue by selection something instead of implying it" * tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: Add hardware dependency to AM654 driver mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
2019-08-05tpm: tpm_ibm_vtpm: Fix unallocated banksNayna Jain
The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-05tpm: Fix null pointer dereference on chip register error pathMilan Broz
If clk_enable is not defined and chip initialization is canceled code hits null dereference. Easily reproducible with vTPM init fail: swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy BUG: kernel NULL pointer dereference, address: 00000000 ... Call Trace: tpm_chip_start+0x9d/0xa0 [tpm] tpm_chip_register+0x10/0x1a0 [tpm] vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy] process_one_work+0x214/0x5a0 worker_thread+0x134/0x3e0 ? process_one_work+0x5a0/0x5a0 kthread+0xd4/0x100 ? process_one_work+0x5a0/0x5a0 ? kthread_park+0x90/0x90 ret_from_fork+0x19/0x24 Fixes: 719b7d81f204 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-08-04Merge tag 'powerpc-5.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.3: - Wire up the new clone3 syscall. - A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware gives us a device that's attached to a non-online NUMA node. - A fix for a boot failure on 32-bit with KASAN enabled. - Three fixes for implicit fall through warnings, some of which are errors for us due to -Werror. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh Sivaraj, Stephen Rothwell" * tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kasan: fix early boot failure on PPC32 drivers/macintosh/smu.c: Mark expected switch fall-through powerpc/spe: Mark expected switch fall-throughs powerpc/nvdimm: Pick nearby online node if the device node is not online powerpc/kvm: Fall through switch case explicitly powerpc: Wire up clone3 syscall
2019-08-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: s3c2410: Mark expected switch fall-through i2c: at91: fix clk_offset for sama5d2 i2c: at91: disable TXRDY interrupt after sending data i2c: iproc: Fix i2c master read more than 63 bytes eeprom: at24: make spd world-readable again
2019-08-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small bunch of fixes from the irqchip department: - Fix a couple of UAF on error paths (RZA1, GICv3 ITS) - Fix iMX GPCv2 trigger setting - Add missing of_node_put() on error path in MBIGEN - Add another bunch of /* fall-through */ to silence warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe() irqchip/irq-imx-gpcv2: Forward irq type to parent irqchip/irq-mbigen: Add of_node_put() before return irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail irqchip/gic-v3: Mark expected switch fall-through
2019-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/acpi/scan.c: document why we don't need the device_hotplug_lock memremap: move from kernel/ to mm/ lib/test_meminit.c: use GFP_ATOMIC in RCU critical section asm-generic: fix -Wtype-limits compiler warnings cgroup: kselftest: relax fs_spec checks mm/memory_hotplug.c: remove unneeded return for void function mm/migrate.c: initialize pud_entry in migrate_vma() coredump: split pipe command whitespace before expanding template page flags: prioritize kasan bits over last-cpuid ubsan: build ubsan.c more conservatively kasan: remove clang version check for KASAN_STACK mm: compaction: avoid 100% CPU usage during compaction when a task is killed mm: migrate: fix reference check race between __find_get_block() and migration mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker ocfs2: remove set but not used variable 'last_hash' Revert "kmemleak: allow to coexist with fault injection" kernel/signal.c: fix a kernel-doc markup
2019-08-03drivers/acpi/scan.c: document why we don't need the device_hotplug_lockDavid Hildenbrand
Let's document why the lock is not needed in acpi_scan_init(), right now this is not really obvious. [akpm@linux-foundation.org: fix tpyo] Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-03drm/modes: Fix unterminated strncpyChuhong Yuan
strncpy(dest, src, strlen(src)) leads to unterminated dest, which is dangerous. Fix it by using strscpy. Fixes: 3aeeb13d8996 ("drm/modes: Support modes names on the command line") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190731020140.3529-1-hslester96@gmail.com
2019-08-02drm/amd/powerplay: correct navi10 vcn powergateEvan Quan
vcn dpm on is a prerequisite for vcn power gate control. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/powerplay: honor hw limit on fetching metrics data for navi10Kevin Wang
too frequently to update mertrics table will cause smu internal error. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02drm/amd/powerplay: Allow changing of fan_control in smu_v11_0Matt Coffin
[Why] Before this change, the fan control state on smu_v11 was not able to be changed because the capability check for checking if the fan control capability existed was inverted. [How] The capability check for fan control in smu_v11_0_auto_fan_control was inverted, to correctly check for the absence, instead of presence of fan control capabilities. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Matt Coffin <mcoffin13@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-02Merge tag 'drm-fixes-2019-08-02-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm fixes from Daniel Vetter: "Dave sends his pull, everyone realizes they've been asleep at the wheel and hits send on their own pulls :-/ Normally I'd just ignore these all because w/e for me and Dave. But this time around the latecomers also included drm-intel-fixes, which failed to send out a -fixes pull thus far for this release (screwed up vacation coverage, despite that 2/3 maintainers were around ... they all look appropriately guilty), and that really is overdue to get landed. And since I had to do a pull request anyway I pulled the other two late ones too. intel fixes (didn't have any ever since the main merge window pull): - gvt fixes (2 cc: stable) - fix gpu reset vs mm-shrinker vs wakeup fun (needed a few patches) - two gem locking fixes (one cc: stable) - pile of misc fixes all over with minor impact, 6 cc: stable, others from this window exynos: - misc minor fixes misc: - some build/Kconfig fixes - regression fix for vm scalability perf test which seems to mostly exercise dmesg/console logging ... - the vgem cache flush fix for arm64 broke the world on x86, so that's reverted again * tag 'drm-fixes-2019-08-02-1' of git://anongit.freedesktop.org/drm/drm: (42 commits) Revert "drm/vgem: fix cache synchronization on arm/arm64" drm/exynos: fix missing decrement of retry counter drm/exynos: add CONFIG_MMU dependency drm/exynos: remove redundant assignment to pointer 'node' drm/exynos: using dev_get_drvdata directly drm/bochs: Use shadow buffer for bochs framebuffer console drm/fb-helper: Instanciate shadow FB if configured in device's mode_config drm/fb-helper: Map DRM client buffer only when required drm/client: Support unmapping of DRM client buffers drm/i915: Only recover active engines drm/i915: Add a wakeref getter for iff the wakeref is already active drm/i915: Lift intel_engines_resume() to callers drm/vgem: fix cache synchronization on arm/arm64 drm/i810: Use CONFIG_PREEMPTION drm/bridge: tc358764: Fix build error drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled. drm/i915/gvt: grab runtime pm first for forcewake use drm/i915/gvt: fix incorrect cache entry for guest page mapping drm/i915/gvt: Checking workload's gma earlier ...
2019-08-02r8152: fix typo in register nameKevin Lo
It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net: phy: fix race in genphy_update_linkHeiner Kallweit
In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong <liuyonglong@huawei.com> Tested-by: liuyonglong <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02enetc: Select PHYLIB while CONFIG_FSL_ENETC_VF is setYueHaibing
Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02net/ethernet/qlogic/qed: force the string buffer NULL-terminatedWang Xiayang
strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-02atm: iphase: Fix Spectre v1 vulnerabilityGustavo A. R. Silva
board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-03mtd: hyperbus: Add hardware dependency to AM654 driverJean Delvare
The hbmc-am654 driver is for the TI AM654, which is an ARM64 SoC, so don't propose this driver on other architectures unless build-testing. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-03mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependenciesVignesh Raghavendra
On x86_64, when CONFIG_OF is not disabled: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=y] && (OF [=n] || COMPILE_TEST [=n]) Selected by [y]: - HBMC_AM654 [=y] && MTD [=y] && MTD_HYPERBUS [=y] due to config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" select MULTIPLEXER select MUX_MMIO Fix this by making HBMC_AM654 imply MUX_MMIO instead of select so that dependencies are taken care of. MUX_MMIO is optional for functioning of driver. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-03mtd: rawnand: micron: handle on-die "ECC-off" devices correctlyMarco Felsch
Some devices are not supposed to support on-die ECC but experience shows that internal ECC machinery can actually be enabled through the "SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter Tables" returns that it is not. Currently, the driver checks the "READ ID Parameter" field directly after having enabled the feature. If the check fails it returns immediately but leaves the ECC on. When using buggy chips like MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will go through the on-die ECC, confusing the host controller which is supposed to be the one handling correction. To address this in a common way we need to turn off the on-die ECC directly after reading the "READ ID Parameter" and before checking the "ECC status". Cc: stable@vger.kernel.org Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-02Merge tag 'for-linus-5.3a-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - a small cleanup - a fix for a build error on ARM with some configs - a fix of a patch for the Xen gntdev driver - three patches for fixing a potential problem in the swiotlb-xen driver which Konrad was fine with me carrying them through the Xen tree * tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/swiotlb: remember having called xen_create_contiguous_region() xen/swiotlb: simplify range_straddles_page_boundary() xen/swiotlb: fix condition for calling xen_destroy_contiguous_region() xen: avoid link error on ARM xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero() xen/pciback: remove set but not used variable 'old_state'
2019-08-02Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Update the compat layer to allow single-byte watchpoints on all addresses (similar to the native support) - arm_pmu: fix the restoration of the counters on the CPU_PM_ENTER_FAILED path - Fix build regression with vDSO and Makefile not stripping CROSS_COMPILE_COMPAT - Fix the CTR_EL0 (cache type register) sanitisation on heterogeneous machines (e.g. big.LITTLE) - Fix the interrupt controller priority mask value when pseudo-NMIs are enabled - arm64 kprobes fixes: recovering of the PSTATE.D flag in the single-step exception handler, NOKPROBE annotations for unwind_frame() and walk_stackframe(), remove unneeded rcu_read_lock/unlock from debug handlers - Several gcc fall-through warnings - Unused variable warnings * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Make debug exception handlers visible from RCU arm64: kprobes: Recover pstate.D in single-step exception handler arm64/mm: fix variable 'tag' set but not used arm64/mm: fix variable 'pud' set but not used arm64: Remove unneeded rcu_read_lock from debug handlers arm64: unwind: Prohibit probing on return_address() arm64: Lower priority mask for GIC_PRIO_IRQON arm64/efi: fix variable 'si' set but not used arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG} arm64: vdso: Fix Makefile regression arm64: module: Mark expected switch fall-through arm64: smp: Mark expected switch fall-through arm64: hw_breakpoint: Fix warnings about implicit fallthrough drivers/perf: arm_pmu: Fix failure path in PM notifier arm64: compat: Allow single-byte watchpoints on all addresses
2019-08-02Merge tag 's390-5.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Default configs updates - Minor qdio cleanup - Sparse warnings fixes - Implicit-fallthrough warnings fixes * tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough vfio-ccw: make vfio_ccw_async_region_ops static s390/3215: add switch fall through comment for -Wimplicit-fallthrough s390/tape: add fallthrough annotations s390/mm: add fallthrough annotations s390/mm: make gmap_test_and_clear_dirty_pmd static s390/kexec: add missing include to machine_kexec_reloc.c s390/perf: make cf_diag_csd static s390/lib: add missing include s390/boot: add missing declarations and includes s390: update configs s390: clean up qdio.h
2019-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes to four drivers with no core changes. The mpt3sas one is theoretical until we get a CPU that goes up to 64 bits physical, the qla2xxx one fixes an oops in a driver initialization error leg and the others are mostly cosmetic" [ The fcoe patches may be worth highlighting - they may be "just" cleanups, but they simplify and fix the odd fc_rport_priv structure handling rules so that the new gcc-9 warnings about memset crossing structure boundaries are gone. The old code was hard for humans to understand too, and really confused the compiler sanity checks - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix possible fcport null-pointer dereferences scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA scsi: hpsa: remove printing internal cdb on tag collision scsi: hpsa: correct scsi command status issue after reset scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure scsi: libfc: Whitespace cleanup in libfc.h
2019-08-02Merge tag 'for-linus-20190802' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Here's a small collection of fixes that should go into this series. This contains: - io_uring potential use-after-free fix (Jackie) - loop regression fix (Jan) - O_DIRECT fragmented bio regression fix (Damien) - Mark Denis as the new floppy maintainer (Denis) - ataflop switch fall-through annotation (Gustavo) - libata zpodd overflow fix (Kees) - libata ahci deferred probe fix (Miquel) - nbd invalidation BUG_ON() fix (Munehisa) - dasd endless loop fix (Stefan)" * tag 'for-linus-20190802' of git://git.kernel.dk/linux-block: s390/dasd: fix endless loop after read unit address configuration block: Fix __blkdev_direct_IO() for bio fragments MAINTAINERS: floppy: take over maintainership nbd: replace kill_bdev() with __invalidate_device() again ata: libahci: do not complain in case of deferred probe io_uring: fix KASAN use after free in io_sq_wq_submit_work loop: Fix mount(2) failure due to race with LOOP_SET_FD libata: zpodd: Fix small read overflow in zpodd_get_mech_type() ataflop: Mark expected switch fall-through
2019-08-02Merge tag 'for-5.3/dm-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix NULL pointer and various whitespace issues with DM's recent DAX code changes from commit in 5.3 merge" * tag 'for-5.3/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: fix various whitespace issues with recent DAX code dm table: fix dax_dev NULL dereference in device_synchronous()
2019-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Doug Ledford: "Here's our second -rc pull request. Nothing particularly special in this one. The client removal deadlock fix is kindy tricky, but we had multiple eyes on it and no one could find a fault in it. A couple Spectre V1 fixes too. Otherwise, all just normal -rc fodder: - A couple Spectre V1 fixes (umad, hfi1) - Fix a tricky deadlock in the rdma core code with refcounting instead of locks (client removal patches) - Build errors (hns) - Fix a scheduling while atomic issue (mlx5) - Use after free fix (mad) - Fix error path return code (hns) - Null deref fix (siw_crypto_hash) - A few other misc. minor fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp() RDMA/mlx5: Release locks during notifier unregister IB/hfi1: Fix Spectre v1 vulnerability IB/mad: Fix use-after-free in ib mad completion handling RDMA/restrack: Track driver QP types in resource tracker IB/mlx5: Fix MR registration flow to use UMR properly RDMA/devices: Remove the lock around remove_client_context RDMA/devices: Do not deadlock during client removal IB/core: Add mitigation for Spectre V1 Do not dereference 'siw_crypto_shash' before checking RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes RDMA/hns: Fix build error
2019-08-02usb: typec: tcpm: Ignore unsupported/unknown alternate mode requestsGuenter Roeck
TCPM may receive PD messages associated with unknown or unsupported alternate modes. If that happens, calls to typec_match_altmode() will return NULL. The tcpm code does not currently take this into account. This results in crashes. Unable to handle kernel NULL pointer dereference at virtual address 000001f0 pgd = 41dad9a1 [000001f0] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6 Hardware name: Atmel SAMA5 Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm] PC is at typec_altmode_attention+0x0/0x14 LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm] ... [<c03fbee8>] (typec_altmode_attention) from [<bf8030fb>] (tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]) [<bf8030fb>] (tcpm_pd_rx_handler [tcpm]) from [<c012082b>] (process_one_work+0x123/0x2a8) [<c012082b>] (process_one_work) from [<c0120a6d>] (worker_thread+0xbd/0x3b0) [<c0120a6d>] (worker_thread) from [<c012431f>] (kthread+0xcf/0xf4) [<c012431f>] (kthread) from [<c01010f9>] (ret_from_fork+0x11/0x38) Ignore PD messages if the associated alternate mode is not supported. Fixes: e9576fe8e605c ("usb: typec: tcpm: Support for Alternate Modes") Cc: stable <stable@vger.kernel.org> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-02xhci: Fix NULL pointer dereference at endpoint zero reset.Mathias Nyman
Usb core will reset the default control endpoint "ep0" before resetting a device. if the endpoint has a valid pointer back to the usb device then the xhci driver reset callback will try to clear the toggle for the endpoint. ep0 didn't use to have this pointer set as ep0 was always allocated by default together with a xhci slot for the usb device. Other endpoints got their usb device pointer set in xhci_add_endpoint() This changed with commit ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") which sets the pointer for any endpoint on a FS/LS device behind a HS hub that halts, including ep0. If xHC controller needs to be reset at resume, then all the xhci slots will be lost. Slots will be reenabled and reallocated at device reset, but unlike other endpoints the ep0 is reset before device reset, while the xhci slot may still be invalid, causing NULL pointer dereference. Fix it by checking that the endpoint has both a usb device pointer and valid xhci slot before trying to clear the toggle. This issue was not seen earlier as ep0 didn't use to have a valid usb device pointer, and other endpoints were only reset after device reset when xhci slots were properly reenabled. Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net> Reported-by: Enric Balletbo Serra <eballetbo@gmail.com> Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/1564758044-24748-1-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-02usb: host: xhci-rcar: Fix timeout in xhci_suspend()Yoshihiro Shimoda
When a USB device is connected to the host controller and the system enters suspend, the following error happens in xhci_suspend(): xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout Since the firmware/internal CPU control the USBSTS.STS_HALT and the process speed is down when the roothub port enters U3, long delay for the handshake of STS_HALT is neeed in xhci_suspend(). So, this patch adds to set the XHCI_SLOW_SUSPEND. Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>