summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-08-24p54: improve eeprom parserChristian Lamparter
Like other vendors, p54* devices have a checksum for the EEPROM descriptor data. This patch enhances the parser code to generate and verify the data fields, before initializing the radio-chip on the card. Note: If you have to bootstrap an alternative EEPROM image for your device and you don't know how to generate a valid crc ccitt checksum, you should take a look at: http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git The "checksum" utility loads a binary p54 EEPROM blob (use the -f switch, to skip the check) and applies the correct crc automatically. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24p54spi: fix eeprom checksumChristian Lamparter
This patch corrects the bogus descriptor checksum of our Nokia N8XX EEPROM blob. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement RX core state setting for rev.2 and earlier PHYsGábor Stefanik
Rev.3+ support coming in a later patch. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement MAC PHY clock setGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Fix typo in function name (gain_crtl -> gain_ctrl)Gábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement Host Flags write during device initGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: separate thermal throttling functionWey-Yi Guy
"Thermal Throttling" is an advance feature which only available for newer _agn devices. Move from iwl-core to iwl-agn for better code organization. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24drivers/net/wireless/wl12xx: Use available error codesJulia Lawall
Error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24drivers/net/wireless/wl12xx: Use available error codesJulia Lawall
In each case, error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: don't enable probe request rx for STAsBob Copeland
AR5K_RX_FILTER_PROBEREQ enables reception of probe requests, but the filter flag FIF_BCN_PRBRESP_PROMISC is actually about receiving beacons and probe _responses_, so we shouldn't turn on the filter when scanning. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove all mention of monitor iftypeBob Copeland
Monitor interfaces are never seen by the driver so these cases are never reached. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove monitor check in receive_frame_ok filterBob Copeland
Monitor interfaces are never seen by the driver, so tests based on that opmode don't make sense. Also, we already pass all mic failure packets. Consequently this code is actually accepting any frames with just crypto errors and rejecting those with CRC, FIFO, and PHY errors for all interface types. Adjust the code and comment accordingly. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: clean up some commentsBob Copeland
This fixes a few misspellings, word repetitions, and some grammar nits in ath5k comments. No code changes. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: remove own (wrong) IEEE80211_MAX_LENNick Kossifidis
Use the version already supplied in include/linux/ieee80211.h. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath5k: rename ath5k_hw_set_associd to _set_bssidNick Kossifidis
Although the named function also sets the aid, its main purpose is configuring the bssid and we use that everywhere else. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24bcm63xx_enet: use netdev statsEric Dumazet
Use integrated net_device stats instead of a private one Get rid of bcm_enet_get_stats() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24ethoc: get rid of ethoc_stats()Eric Dumazet
drivers can avoid implementing ndo_get_stats method if using netdevice stats structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24be2net: get rid of be_get_stats()Eric Dumazet
drivers can avoid implementing ndo_get_stats method if using netdevice stats structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: update PCI idsDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: fix setting of the function number in transmit descriptorsDimitris Michailidis
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: support eeprom read/write on functions other than 0Dimitris Michailidis
Extend the address translation for eeprom read/write (code used by ethtool -[eE]) to functions other than 0. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23cxgb4: handle Rx/Tx queue ranges not starting at 0Dimitris Michailidis
Currently the driver assumes that queue IDs start at 0 but that's true only for function 0. To support operation on other functions get the start of the queue ranges from FW and offset accordingly. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23bna: Delete get_flags and set_flags ethtool methods.David S. Miller
This driver doesn't support LRO, NTUPLE, or the RXHASH features. So it should not set these ethtool operations. This also fixes the warning: drivers/net/bna/bnad_ethtool.c:1272: warning: initialization from incompatible pointer type Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-23bna: Brocade 10Gb Ethernet device driverRasesh Mody
This is patch 1/6 which contains linux driver source for Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: include/linux/if_pppox.h Fix conflict between Changli's __packed header file fixes and the new PPTP driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22mlx4: remove num_lro parameterAmerigo Wang
As suggested by David, this parameter can die, we can use ethtool to turn LRO on/off. Compile tests only. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22xen: use less generic names in netfront driver.Ian Campbell
All Xen frontend drivers have a couple of identically named functions which makes figuring out which device went wrong from a stacktrace harder than it needs to be. Rename them to something specificto the device type. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22isdn/avm: fix build when PCMCIA is not enabledRandy Dunlap
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22bnx2: Add PCI Advanced Error Reporting support.John Feeney
Signed-off-by: John Feeney <jfeeney@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22tokenring: remove unneeded NULL checksDan Carpenter
"fw_entry" is always non-NULL at this point and anyway release_firmware() handles NULL parameters. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-08-21amd8111e: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the amd8111e_priv struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21atl1c: use net_device_stats from struct net_deviceEric Dumazet
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the atl1c_adapter struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-21PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)Dmitry Kozlov
PPP: introduce "pptp" module which implements point-to-point tunneling protocol using pppox framework NET: introduce the "gre" module for demultiplexing GRE packets on version criteria (required to pptp and ip_gre may coexists) NET: ip_gre: update to use the "gre" module This patch introduces then pptp support to the linux kernel which dramatically speeds up pptp vpn connections and decreases cpu usage in comparison of existing user-space implementation (poptop/pptpclient). There is accel-pptp project (https://sourceforge.net/projects/accel-pptp/) to utilize this module, it contains plugin for pppd to use pptp in client-mode and modified pptpd (poptop) to build high-performance pptp NAS. There was many changes from initial submitted patch, most important are: 1. using rcu instead of read-write locks 2. using static bitmap instead of dynamically allocated 3. using vmalloc for memory allocation instead of BITS_PER_LONG + __get_free_pages 4. fixed many coding style issues Thanks to Eric Dumazet. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlge: pull NULL check ahead of dereferenceDan Carpenter
There was a dereference before NULL check issue introduced in 1e213303d "qlge: Add tx multiqueue support." I've pulled the NULL check of "net_rsp" forward a couple lines to avoid that. Also Ron Mercer says that the early exit should be above the index write. ql_write_cq_idx(rx_ring); Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19tehuti: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the bdx_priv struct. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ep93xx_eth: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the ep93xx_priv struct. As the new ndo_get_stats function would just return dev->stats we can omit it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-08-19qlcnic: update version 5.0.8Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: rom lock recoverySucheta Chakraborty
Fw can get stuck while holding pci semaphore. Driver will not be able to perform fw initialization, without this lock. Release semaphore forcefully in that case. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: firmware initialization updateSony Chacko
Cleanup legacy code which is not valid for Qlogic CNA adapters. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix endiness in eswitch statisticsAmit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: mark device state as failedAmit Kumar Salecha
Mark device state failed in error path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix npar stateAmit Kumar Salecha
Privilege functions should wait for npar state to be operational. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: support anti mac spoofingSony Chacko
Administrator can configure to drop packet in transmit, if it doesn't match interface mac address, in case of virtual function. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure offload setting on eswitchRajesh Borundia
Device is not capable of enabling/disabling offload setting per port in case of Nic Partition.So offload settings needs to be enabled/disabled per eswitch and it will affect all the function on that eswitch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: configure port on eswitchRajesh Borundia
o Nic partition capable devices has embedded switch, this needs to support various features like external switch. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: replace magic numbers with definesSony Chacko
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: remove unused codeSony Chacko
Serial number references are not used in driver. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlcnic: fix inconsistent lock stateAmit Kumar Salecha
Spin_lock(rds_ring->lock) is not required while posting buffers from qlcnic_open and freeing buffers from qlcnic_down. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 08:04:41 +0000