summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-11-17ath9k: remove bf_tx_aborted from struct ath_bufFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_frmlen from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_nframes from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_al from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_keyix from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_paprd_timestamp from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_keytype from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_tidno from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: remove bfs_seqno from struct ath_buf_stateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k: fix PA predistortion training frame setupFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17ath9k_hw: set default values for radar pulse detectionFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Modify rt2x00queue_remove_l2pad to make skb->data two-byte alignmentRA-Jay Hung
When send out skb data to mac80211, orignal code will cause mac80211 unaligned access, so modify code to make mac80211 can natural access. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Fix header_length in rt2x00lib_txdoneRA-Jay Hung
Put the assignment of header_length after pull out extra tx headroom Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Fix rt2800 USB TX Path DMA issueRA-Jay Hung
rt2800usb chips need to add 1~3 bytes zero padding after each 802.11 header & payload, and at the end need to add 4 bytes zero padding whether doing TX bulk aggregation or not, TXINFO_W0_USB_DMA_TX_PKT_LEN in TXINFO must include 1-3 bytes padding after 802.11 header & payload but do not include 4 bytes end zero padding. In rt2800usb_get_tx_data_len do not consider multiple of the USB packet size case, sometimes this will cause USB DMA problem. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Use ioremap for SoC devices instead of KSEG1ADDR.Gertjan van Wingerde
Make the code a bit more portable to architectures that do not support KSEG1ADDR. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Remove unneccessary internal Kconfig symbols.Gertjan van Wingerde
CONFIG_RT2800PCI_PCI and CONFIG_RT2800PCI_SOC are strictly not needed as we can check the dependent symbols directly in the rest of Kconfig and the code, so clean up the Kconfig namespace a bit. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Remove RT30XX Kconfig variables.Gertjan van Wingerde
Enabling of RT30xx devices via Kconfig variables was introduced when these devices weren't properly supported yet. Now that that they are properly supported and functional, we can remove these Kconfig variables for RT30xx devices and simply enable them whenever rt2800pci and/or rt2800usb is enabled. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Clean up Kconfig for RT2800 devices.Gertjan van Wingerde
General clean up of the Kconfig part for RT28XX devices. Also remove the indications of non functional support for rt27xx/rt28xx/rt30xx devices, as this is no longer true. They just work fine. Finally, remove the experimental indications for rt27xx/rt28xx/rt30xx devices as that is no longer true. Keep the experimental indications for rt33xx/rt35xx devices, though. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Add initial support for RT3370/RT3390 devices.Gertjan van Wingerde
Modified from Eddy's patch by adding the RT3370 USB support as well. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Eddy Tsai <Eddy_Tsai@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Increase REGISTER_BUSY_COUNTIvo van Doorn
For some hardware the REGISTER_BUSY_COUNT isn't sufficient, increase the REGISTER_BUSY_COUNT to 100 to catch most devices which have more problems with accessing the registers. For normal operating devices nothing would change as they will exit the loop early anyway. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_htc: Use macro for caldata array sizeMohammed Shafi Shajakhan
The calibration data variable size is based on the number of channels available in the ath9k driver. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16iwlwifi: kill elapsed_jiffiesStanislaw Gruszka
Subtract of jiffies is fine even if one variable overwrap. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16iwlagn: simplify iwlagn_tx_skbStanislaw Gruszka
We can simplify length calculation in iwlagn_tx_skb, that function is enough complex, without fuzz it more than necessary. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16iwl3945: remove unused len_org variableStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: add a private op for configuring radar pulse detectionFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: clean up tx buffer setupFelix Fietkau
Merge ath_tx_send_normal and ath_tx_send_ht_normal. Move the paprd state initialization and sequence number assignment to reduce the number of redundant checks. This not only simplifies buffer allocation error handling, but also removes a small inconsistency in the buffer HT flag. This flag should only be set if the frame is also a QoS data frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: remove the tx info padding byte abuseFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: handle tx underrun in the driver instead of rate controlFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: remove the unnecessary private xretry tx flagFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath5k: Cleanup opmode setting logic.Ben Greear
An earlier review suggested moving the code in a small method that was only called once inline. This patch accomplishes that. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Fix low throughput issue with AR93xxSenthil Balasubramanian
TX underruns were noticed when RTS/CTS preceded aggregates. This issue was noticed in ar93xx family of chipsets only. The workaround involves padding the RTS or CTS length up to the min packet length of 256 bytes required by the hardware by adding delimiters to the fist descriptor of the aggregate. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k: Fix bug in delimiter padding computationVasanthakumar Thiagarajan
There is a roundng error in delimiter padding computation which causes severe throughput drop with some of AR9003. signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc:stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Add helper function for interpolationVasanthakumar Thiagarajan
Also round off interpolated values this would improve power accuracy by 0.5dB in some cases. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Improve power control accuracy for AR9003Vasanthakumar Thiagarajan
It is done for 5Ghz by adding three temperature slopes. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Enable strong signal detection for AR9003Vasanthakumar Thiagarajan
Attenuation from eeprom is configured into attenuator control register. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Fix XPABIAS level configuration for AR9003Vasanthakumar Thiagarajan
Improper configuration of 0x16288 and 0x16290 would affect transmission. Cc:stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: add eeprom templates for ar9003 family chipsetsSenthil Balasubramanian
We are currently using the default eeprom default and it doesn't work properly for all ar9003 family chipsets. So add eeprom templates for different versisons and select the eeprom table based on the template version programmed in the eeprom. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Fix paprd training frame failure.Senthil Balasubramanian
paprd training frame fails in some rates. Fix the rate mask. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Initialize 2GHz CTL properly.Senthil Balasubramanian
The last 2GHz CTL was not being initialized, so power was being set to 0 instead of 30dbm. Initialize to 30 like other CTLs. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Add new member into the eeprom structure.Senthil Balasubramanian
Add eeprom base extension structures which are needed for AR938x caliberation changes and gain calculation. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath9k_hw: Fix a reset failure on AR9382 (2x2).Senthil Balasubramanian
AR9382 needs to be configured for the correct chain mask before running AGC/TxIQ caliberation. Otherwise reset would fail. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ath5k: Add support for antenna configurationBruno Randolf
Support setting the antenna configuration via cfg/mac80211. At the moment only allow the simple pre-defined configurations we already have (fixed antenna A/B or diversity), but more advanced settings are possible to implement. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16drivers/net/wireless/b43legacy/main.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16drivers/net/wireless/b43/main.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16drivers/net/wireless/ath/debug.c: Use printf extension %pVJoe Perches
Using %pV reduces the number of printk calls and eliminates any possible message interleaving from other printk calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16rndis_wlan: workaround poor scanning with BCM4320aJussi Kivilinna
BCM4320a devices seem to sometimes do scanning pretty poorly. This can be workaround by issuing new scan every second, while not yet connected. By this new scanning method device catches beacons much faster. Fixes bug #20822. Reported-by: Luís Picciochi <Pitxyoki@gmail.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16rndis_wlan: workaround device not returning bss for currently connected APJussi Kivilinna
BCM4320a devices do not return bss for currently connected AP in bss-list, althought this is required by NDIS specs. Missing bss leads to warning at net/wireless/sme.c:__cfg80211_connect_result(), WARN_ON(!bss). Workaround this by crafting bss manually with information we can read from device. Workaround is only used when device bss-list does not return current bss, and so is only used with BCM4320a devices and not newer BCM4320b ones. Fixes bug #20152. Reported-by: Luís Picciochi <Pitxyoki@gmail.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: return -ENOMEM on alloc fail (instead of CRC check's result)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16ssb: workarounds: be verbose about hacking SPROM revision, don't duplicate codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-16mwl8k: use const struct fw pointers throughoutBrian Cavagnolo
This eliminates compiler warnings by doing things how the firmware class expects. Signed-off-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 06:39:43 +0000