summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-01-04cxgb4: Support compressed error vector for T6Arjun V
t6fw-1.15.15.0 enabled compressed error vector in cpl_rx_pkt for T6. Updating driver to take care of these changes. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04sh_eth: factor out sh_eth_emac_interrupt()Sergei Shtylyov
The E-MAC interrupt (EESR.ECI) is not always caused by an error condition, so it really shouldn't be handled by sh_eth_error(). Factor out the E-MAC interrupt handler, sh_eth_emac_interrupt(), removing the ECI bit from the EESR's values throughout the driver... Update Cogent Embedded's copyright and clean up the whitespace in Renesas' copyright, while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04sh_eth: no need for *else* after *goto*Sergei Shtylyov
Well, checkpatch.pl complains about *else* after *return* and *break* but not after *goto*... and it probably should have complained about the code in sh_eth_error(). Win couple LoCs by removing that *else*. :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04sh_eth: handle only enabled E-MAC interruptsSergei Shtylyov
The driver should only handle the enabled E-MAC interrupts, like it does for the E-DMAC interrupts since commit 3893b27345ac ("sh_eth: workaround for spurious ECI interrupt"), so mask ECSR with ECSIPR when reading it in sh_eth_error(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: Initialize CGR structure before initRoy Pledge
The QBMan CGR options needs to be zeroed before calling the init function Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: cleanup after init_phy() failureMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: systemport: Pad packet before inserting TSBFlorian Fainelli
Inserting the TSB means adding an extra 8 bytes in front the of packet that is going to be used as metadata information by the TDMA engine, but stripped off, so it does not really help with the packet padding. For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP) we can end-up padding them after the TSB insertion, thus making them 64 bytes, but with the TDMA stripping off the first 8 bytes, they could still be smaller than 64 bytes which is required to ingress the switch. Fix this by swapping the padding and TSB insertion, guaranteeing that the packets have the right sizes. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: systemport: Utilize skb_put_padto()Florian Fainelli
Since we need to pad our packets, utilize skb_put_padto() which increases skb->len by how much we need to pad, allowing us to eliminate the test on skb->len right below. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04ipvlan: assign unique dev-id for each slave device.Mahesh Bandewar
IPvlan setup uses one mac-address (of master). The IPv6 link-local addresses are derived using the mac-address on the link. Lack of dev-ids makes these link-local addresses same for all slaves including that of master device. dev-ids are necessary to add differentiation when L2 address is shared. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04liquidio: remove PTP support in 23XX adaptersPrasad Kanneganti
liquidio driver incorrectly indicates that PTP is supported in 23XX adapters; this patch fixes that. PTP is supported in 66XX and 68XX adapters, and the driver correctly indicates that. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04LiquidIO VF: s/select/imply/ for PTP_1588_CLOCKNicolas Pitre
Fix a minor fallout from the merge of the timers and the networking trees. The following error may result if the PTP_1588_CLOCK prerequisites are not available: drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0a5): undefined reference to `pps_unregister_source' drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0cc): undefined reference to `posix_clock_unregister' drivers/built-in.o: In function `ptp_clock_event': (.text+0x40e249): undefined reference to `pps_event' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e5e1): undefined reference to `pps_register_source' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e62c): undefined reference to `posix_clock_register' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e68d): undefined reference to `pps_unregister_source' Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04libcxgb: fix error check for ip6_route_output()Varun Prakash
ip6_route_output() never returns NULL so check dst->error instead of !dst. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: usb: asix_devices: add .reset_resume for USB PMPeter Chen
The USB core may call reset_resume when it fails to resume asix device. And USB core can recovery this abnormal resume at low level driver, the same .resume at asix driver can work too. Add .reset_resume can avoid disconnecting after backing from system resume, and NFS can still be mounted after this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A set of fixes for the current series, one fixing a regression with block size < page cache size in the alias series from Jan. Outside of that, two small cleanups for wbt from Bart, a nvme pull request from Christoph, and a few small fixes of documentation updates" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix up io_poll documentation block: Avoid that sparse complains about context imbalance in __wbt_wait() block: Make wbt_wait() definition consistent with declaration clean_bdev_aliases: Prevent cleaning blocks that are not in block range genhd: remove dead and duplicated scsi code block: add back plugging in __blkdev_direct_IO nvmet/fcloop: remove some logically dead code performing redundant ret checks nvmet: fix KATO offset in Set Features nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues nvme/fc: correct some printk information nvme/scsi: Remove START STOP emulation nvme/pci: Delete misleading queue-wrap comment nvme/pci: Fix whitespace problem nvme: simplify stripe quirk nvme: update maintainers information
2017-01-04Merge tag 'fbdev-v4.10-rc2' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - bring fbdev subsystem back into Maintained mode - add missing devm_ioremap() error checking to cobalt_lcdfb driver * tag 'fbdev-v4.10-rc2' of git://github.com/bzolnier/linux: video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap MAINTAINERS: add myself as maintainer of fbdev
2017-01-04video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremapArvind Yadav
Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-01-03net: vrf: Add missing Rx countersDavid Ahern
The move from rx-handler to L3 receive handler inadvertantly dropped the rx counters. Restore them. Fixes: 74b20582ac38 ("net: l3mdev: Add hook in ip and ipv6") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03ixgbe: Add PF support for VF promiscuous modeDon Skidmore
This patch extends the xcast mailbox message to include support for unicast promiscuous mode. To allow a VF to enter this mode the PF must be in promiscuous mode. A later patch will add the support needed in the VF driver (ixgbevf) Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbevf: Add support for VF promiscuous modeDon Skidmore
This patch extends the mailbox message to allow for VF promiscuous mode support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Implement support for firmware-controlled PHYsMark Rustad
Implement support for devices that have firmware-controlled PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Implement firmware interface to access some PHYsMark Rustad
Implement new interface for firmware commands to access some PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Remove unused firmware version functions and methodMark Rustad
The firmware version method and functions are not used anywhere, so remove them all. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix issues with EEPROM accessMark Rustad
There are two problems with EEPROM access. One is that it needs to hold the semaphore until the entire response is read or else the response can be corrupted by other firmware accesses. The second problem is that acquiring and releasing the semaphore is slow, so it should be taken and released once when multiple EEPROM accesses will be done. Both of these issues can be solved by adding a new function, ixgbe_hic_unlocked, to issue firmware commands that will assume that the caller has acquired the needed semaphore. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Configure advertised speeds correctly for KR/KX backplaneDon Skidmore
This patch ensures that the advertised link speeds are configured for X553 KR/KX backplane. Without this patch the link remains at 1G when resuming from low power after being downshifted by LPLU. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbevf: restore hw_addr on resume or errorEmil Tantilov
Restore adapter->hw.hw_addr after handling an error, or a resume operation to make sure we can access the registers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix incorrect bitwise operations of PTP Rx timestamp flagsYusuke Suzuki
Rx timestamp does not work on 82599 and X540 because bitwise operation of RX_HWTSTAMP flags is incorrect and ixgbe_ptp_rx_hwtstamp() is never called. This patch fixes it to enable Rx timestamp on 82599 and X540. Without this fix: ptp4l[278.730]: selected /dev/ptp8 as PTP clock ptp4l[278.733]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.733]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.834]: port 1: received SYNC without timestamp ptp4l[278.835]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[279.834]: port 1: received SYNC without timestamp ptp4l[280.834]: port 1: received SYNC without timestamp ptp4l[281.834]: port 1: received SYNC without timestamp ptp4l[282.834]: port 1: received SYNC without timestamp ptp4l[282.835]: selected best master clock 1c3947.fffe.60f9cc ptp4l[282.835]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[283.834]: port 1: received SYNC without timestamp With this fix: ptp4l[239.154]: selected /dev/ptp8 as PTP clock ptp4l[239.157]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[239.157]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[240.989]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[244.989]: selected best master clock 1c3947.fffe.60f9cc ptp4l[244.989]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[246.977]: master offset -899583339542096 s0 freq +0 path delay 16222 ptp4l[247.977]: master offset -899583339617265 s1 freq -75169 path delay 16177 ptp4l[248.977]: master offset -130 s2 freq -75299 path delay 16177 ptp4l[248.977]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[249.977]: master offset -9 s2 freq -75217 path delay 16177 ptp4l[250.977]: master offset 88 s2 freq -75123 path delay 16132 Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Yusuke Suzuki <yus-suzuki@uf.jp.nec.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbevf: fix AER error handlingEmil Tantilov
Make sure that we free the IRQs in ixgbevf_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbevf_remove() after a failed recovery from AER error because the interrupts were not freed. Also moved the down and free functions into ixgbevf_close_suspend() same as with ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: fix AER error handlingEmil Tantilov
Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: test for trust in macvlan adjustments for VFKen Cox
There are two methods for setting mac addresses in a Macvlan, that differentiate themselves in the function macvlan_set_mac_Address. If the macvlan mode is passthru, then we use the dev_set_mac_address method, otherwise we use the dev_uc api via macvlan_sync_addresses. The latter method (which would stem from using any non-passthru mode, like bridge, or vepa), calls down into the driver in a path that terminates in ixgbevf_set_uc_addr_vf, which sends a IXGBE_VF_SET_MACVLAN message, which causes the pf to spawn the noted error message. This occurs because it appears that the guest is trying to delete the mac address of the macvlan before adding another. The other path in macvlan_set_mac_address uses dev_set_mac_address, which calls into ixgbevf_set_mac which uses the IXGBE_VF_SET_MAC_ADDR to the pf to set the macvlan mac address. The discrepancy here is in the handlers. The handler function for IXGBE_VF_SET_MAC_ADDR (ixgbe_set_vf_mac_addr) has a check for the vfinfo[].trusted bit to allow the operation if the vf is trusted. In comparison, the IXGBE_VF_SET_MACVLAN message handler (ixgbe_set_vf_macvlan_msg) has no such check of the trusted bit. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbevf: handle race between close and suspend on shutdownEmil Tantilov
When an interface is part of a namespace it is possible that ixgbevf_close() may be called while ixgbevf_suspend() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs() To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and check for !netif_device_present() to avoid entering close while in suspend. Also added rtnl locks to ixgbevf_queue_reset_subtask(). CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: handle close/suspend race with netif_device_detach/presentEmil Tantilov
When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix reporting of 100Mb capabilityTony Nguyen
BaseT adapters that are capable of supporting 100Mb are not reporting this capability. This patch corrects the reporting so that 100Mb is shown as supported on those adapters. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Reduce I2C retry count on X550 devicesTony Nguyen
A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Add bounds check for x540 LED functionsTony Nguyen
This is an extension of commit 003287e0f087 ("ixgbevf: Correct parameter sent to LED function"); add bounds checking to x540 functions to ensure the index is valid. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: add mask for 64 RSS queuesEmil Tantilov
The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Fix check for ixgbe_phy_x550em_ext_t resetTony Nguyen
The generic PHY reset check we had previously is not sufficient for the ixgbe_phy_x550em_ext_t PHY type. Check 1.CC02.0 instead - same as ixgbe_init_ext_t_x550(). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Report driver version to firmware for x550 devicesTony Nguyen
Some x550 devices require the driver version reported to its firmware; this patch sends the driver version string to the firmware through the host interface command for x550 devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: do not disable FEC from the driverEmil Tantilov
FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03benet: stricter vxlan offloading check in be_features_checkSabrina Dubroca
When VXLAN offloading is enabled, be_features_check() tries to check if an encapsulated packet is indeed a VXLAN packet. The check is not strict enough, and considers any UDP-encapsulated ethernet frame with a 8-byte tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE have a 8-byte header, so they get through this check. Force the UDP destination port to be the one that has been offloaded to hardware. Without this, GENEVE-encapsulated packets can end up having an incorrect checksum when both a GENEVE and a VXLAN (offloaded) tunnel are configured. This is similar to commit a547224dceed ("mlx4e: Do not attempt to offload VXLAN ports that are unrecognized"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03sfc-falcon: declare module version (same as ethtool drvinfo version)Edward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03sfc: declare module version (same as ethtool drvinfo version)Edward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03dsa:mv88e6xxx: allow address 0x1 in smi_initVolodymyr Bendiuga
Some devices, such as the mv88e6097 do have ADDR[0] external and so it is possible to configure the device to use SMI address 0x1. Remove the restriction, as there are boards using this address. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@westermo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: freescale: dpaa: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: macb: Updated resource allocation function calls to new version of API.Bartosz Folta
Changed function calls of resource allocation to new API. Changed way of setting DMA mask. Removed unnecessary sanity check. This patch is sent in regard to recently applied patch Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26 net: macb: Added PCI wrapper for Platform Driver. Signed-off-by: Bartosz Folta <bfolta@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: use generic pm implementationJohan Hovold
Now that we have an exit callback in place, add init as well and get rid of the custom PM callbacks in favour of the generic ones. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaksJohan Hovold
Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by calling the new glue helper function. For driver unbind, use the generic stmmac-platform remove implementation and add an exit callback to disable the clock. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03net: stmmac: dwmac-oxnas: fix of-node leakJohan Hovold
Use the syscon lookup-by-phandle helper so that the reference taken by of_parse_phandle() is released when done with the node. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02net: fealnx: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02net: faraday: ftmac100: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02net: emulex: benet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:09:09 +0000